these 2 derivations will be built: /nix/store/c0i0ds3bjx1zkrc0g2kbck4mryk86q0l-nixos-test-driver-wal2json.drv /nix/store/izbp00ffw3d2dx4zmwli0afqyydhz3xw-vm-test-run-wal2json.drv building '/nix/store/c0i0ds3bjx1zkrc0g2kbck4mryk86q0l-nixos-test-driver-wal2json.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/c0i0ds3bjx1zkrc0g2kbck4mryk86q0l-nixos-test-driver-wal2json.drv' nixos-test-driver-wal2json> Running type check (enable/disable: config.skipTypeCheck) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck nixos-test-driver-wal2json> Success: no issues found in 1 source file nixos-test-driver-wal2json> additionally exposed symbols: nixos-test-driver-wal2json> , nixos-test-driver-wal2json> , nixos-test-driver-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug nixos-test-driver-wal2json> Linting test script (enable/disable: config.skipLint) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint building '/nix/store/izbp00ffw3d2dx4zmwli0afqyydhz3xw-vm-test-run-wal2json.drv' on 'ssh-ng://builder@mac-linux-builder' building '/nix/store/izbp00ffw3d2dx4zmwli0afqyydhz3xw-vm-test-run-wal2json.drv' vm-test-run-wal2json> Machine state will be reset. To keep it, pass --keep-vm-state vm-test-run-wal2json> start all VLans vm-test-run-wal2json> start vlan vm-test-run-wal2json> running vlan (pid 7; ctl /build/vde1.ctl) vm-test-run-wal2json> (finished: start all VLans, in 0.00 seconds) vm-test-run-wal2json> Test will time out and terminate in 3600 seconds vm-test-run-wal2json> run the VM test script vm-test-run-wal2json> additionally exposed symbols: vm-test-run-wal2json> server, vm-test-run-wal2json> vlan1, vm-test-run-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug vm-test-run-wal2json> Running tests for extension: wal2json vm-test-run-wal2json> start all VMs vm-test-run-wal2json> server: starting vm vm-test-run-wal2json> mke2fs 1.47.3 (8-Jul-2025) vm-test-run-wal2json> qemu-system-aarch64: Could not access KVM kernel module: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: failed to initialize kvm: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: falling back to tcg vm-test-run-wal2json> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-wal2json> server # Formatting '/build/vm-state-server/tmp.Vak5kuEKmE', fmt=raw size=1073741824 vm-test-run-wal2json> server # Discarding device blocks: 0/262144 done vm-test-run-wal2json> server # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-wal2json> server # Filesystem UUID: 77a016ab-854b-4f87-95df-093e91b74667 vm-test-run-wal2json> server # Superblock backups stored on blocks: vm-test-run-wal2json> server # 32768, 98304, 163840, 229376 vm-test-run-wal2json> server # vm-test-run-wal2json> server # Allocating group tables: 0/8 done vm-test-run-wal2json> server # Writing inode tables: 0/8 done vm-test-run-wal2json> server # Creating journal (8192 blocks): done vm-test-run-wal2json> server # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-wal2json> server: QEMU running (pid 9) vm-test-run-wal2json> server # vm-test-run-wal2json> server # Virtualisation disk image created. vm-test-run-wal2json> (finished: start all VMs, in 0.15 seconds) vm-test-run-wal2json> server: waiting for unit multi-user.target vm-test-run-wal2json> server: waiting for the VM to finish booting vm-test-run-wal2json> server # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510] vm-test-run-wal2json> server # [ 0.000000] Linux version 6.12.63 (runner@ie-supabase-native-arm-5hdpw-2qtrh) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP Thu Dec 18 12:55:23 UTC 2025 vm-test-run-wal2json> server # [ 0.000000] KASLR enabled vm-test-run-wal2json> server # [ 0.000000] random: crng init done vm-test-run-wal2json> server # [ 0.000000] Machine model: linux,dummy-virt vm-test-run-wal2json> server # [ 0.000000] efi: UEFI not found. vm-test-run-wal2json> server # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT vm-test-run-wal2json> server # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] NODE_DATA(0) allocated [mem 0x13f602200-0x13f60593f] vm-test-run-wal2json> server # [ 0.000000] Zone ranges: vm-test-run-wal2json> server # [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] vm-test-run-wal2json> server # [ 0.000000] DMA32 empty vm-test-run-wal2json> server # [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Device empty vm-test-run-wal2json> server # [ 0.000000] Movable zone start for each node vm-test-run-wal2json> server # [ 0.000000] Early memory node ranges vm-test-run-wal2json> server # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 vm-test-run-wal2json> server # [ 0.000000] psci: probing for conduit method from DT. vm-test-run-wal2json> server # [ 0.000000] psci: PSCIv1.1 detected in firmware. vm-test-run-wal2json> server # [ 0.000000] psci: Using standard PSCI v0.2 function IDs vm-test-run-wal2json> server # [ 0.000000] psci: Trusted OS migration not required vm-test-run-wal2json> server # [ 0.000000] psci: SMC Calling Convention v1.0 vm-test-run-wal2json> server # [ 0.000000] percpu: Embedded 88 pages/cpu s180056 r65536 d114856 u360448 vm-test-run-wal2json> server # [ 0.000000] Detected PIPT I-cache on CPU0 vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: GIC system register CPU interface vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: HCRX_EL2 register vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: 52-bit Virtual Addressing (LPA2) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Spectre-v4 vm-test-run-wal2json> server # [ 0.000000] alternatives: applying boot alternatives vm-test-run-wal2json> server # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/jw3gakad9xzrps7zrfw0b9rj0945fvbn-nixos-system-server-test/init regInfo=/nix/store/jmr84yi7w950mkfb47d29qmiwrjyniaf-closure-info/registration console=ttyAMA0,115200n8 console=tty0 vm-test-run-wal2json> server # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/jmr84yi7w950mkfb47d29qmiwrjyniaf-closure-info/registration", will be passed to user space. vm-test-run-wal2json> server # [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Fallback order for Node 0: 0 vm-test-run-wal2json> server # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 vm-test-run-wal2json> server # [ 0.000000] Policy zone: Normal vm-test-run-wal2json> server # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-wal2json> server # [ 0.000000] software IO TLB: area num 2. vm-test-run-wal2json> server # [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) vm-test-run-wal2json> server # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-wal2json> server # [ 0.000000] allocated 8388608 bytes of page_ext vm-test-run-wal2json> server # [ 0.000000] ftrace: allocating 72257 entries in 283 pages vm-test-run-wal2json> server # [ 0.000000] ftrace: allocated 283 pages with 5 groups vm-test-run-wal2json> server # [ 0.000000] rcu: Hierarchical RCU implementation. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU event tracing is enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] Rude variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] Tracing variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. vm-test-run-wal2json> server # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 vm-test-run-wal2json> server # [ 0.000000] GICv3: 256 SPIs implemented vm-test-run-wal2json> server # [ 0.000000] GICv3: 0 Extended SPIs implemented vm-test-run-wal2json> server # [ 0.000000] Root IRQ handler: gic_handle_irq vm-test-run-wal2json> server # [ 0.000000] GICv3: GICv3 features: 16 PPIs vm-test-run-wal2json> server # [ 0.000000] GICv3: GICD_CTRL.DS=1, SCR_EL3.FIQ=0 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 vm-test-run-wal2json> server # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @100ae0000 (indirect, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @100af0000 (flat, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] GICv3: using LPI property table @0x0000000100b00000 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100b10000 vm-test-run-wal2json> server # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-wal2json> server # [ 0.000000] arch_timer: cp15 timer(s) running at 1000.00MHz (virt). vm-test-run-wal2json> server # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-wal2json> server # [ 0.000038] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns vm-test-run-wal2json> server # [ 0.004804] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-wal2json> server # [ 0.016330] Console: colour dummy device 80x25 vm-test-run-wal2json> server # [ 0.017887] printk: legacy console [tty0] enabled vm-test-run-wal2json> server # [ 0.023514] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) vm-test-run-wal2json> server # [ 0.023906] pid_max: default: 32768 minimum: 301 vm-test-run-wal2json> server # [ 0.025982] LSM: initializing lsm=capability,landlock,yama,bpf vm-test-run-wal2json> server # [ 0.028480] landlock: Up and running. vm-test-run-wal2json> server # [ 0.028554] Yama: becoming mindful. vm-test-run-wal2json> server # [ 0.032708] LSM support for eBPF active vm-test-run-wal2json> server # [ 0.036262] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.036674] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.068947] cacheinfo: Unable to detect cache hierarchy for CPU 0 vm-test-run-wal2json> server # [ 0.080782] rcu: Hierarchical SRCU implementation. vm-test-run-wal2json> server # [ 0.080886] rcu: Max phase no-delay instances is 1000. vm-test-run-wal2json> server # [ 0.082385] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-wal2json> server # [ 0.089545] fsl-mc MSI: its@8080000 domain created vm-test-run-wal2json> server # [ 0.091987] EFI services will not be available. vm-test-run-wal2json> server # [ 0.094143] smp: Bringing up secondary CPUs ... vm-test-run-wal2json> server # [ 0.100185] Detected PIPT I-cache on CPU1 vm-test-run-wal2json> server # [ 0.101570] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000 vm-test-run-wal2json> server # [ 0.102294] GICv3: CPU1: using allocated LPI pending table @0x0000000100b20000 vm-test-run-wal2json> server # [ 0.104338] CPU1: Booted secondary processor 0x0000000001 [0x000f0510] vm-test-run-wal2json> server # [ 0.109415] smp: Brought up 1 node, 2 CPUs vm-test-run-wal2json> server # [ 0.109578] SMP: Total of 2 processors activated. vm-test-run-wal2json> server # [ 0.109622] CPU: All CPU(s) started at EL1 vm-test-run-wal2json> server # [ 0.109787] CPU features: detected: Branch Target Identification vm-test-run-wal2json> server # [ 0.109839] CPU features: detected: 32-bit EL0 Support vm-test-run-wal2json> server # [ 0.109870] CPU features: detected: 32-bit EL1 Support vm-test-run-wal2json> server # [ 0.109896] CPU features: detected: ARMv8.4 Translation Table Level vm-test-run-wal2json> server # [ 0.109928] CPU features: detected: Instruction cache invalidation not required for I/D coherence vm-test-run-wal2json> server # [ 0.109964] CPU features: detected: Data cache clean to the PoU not required for I/D coherence vm-test-run-wal2json> server # [ 0.110021] CPU features: detected: Common not Private translations vm-test-run-wal2json> server # [ 0.110048] CPU features: detected: CRC32 instructions vm-test-run-wal2json> server # [ 0.110070] CPU features: detected: Data cache clean to Point of Deep Persistence vm-test-run-wal2json> server # [ 0.110097] CPU features: detected: Data cache clean to Point of Persistence vm-test-run-wal2json> server # [ 0.110120] CPU features: detected: Data independent timing control (DIT) vm-test-run-wal2json> server # [ 0.110143] CPU features: detected: E0PD vm-test-run-wal2json> server # [ 0.110165] CPU features: detected: Enhanced Counter Virtualization vm-test-run-wal2json> server # [ 0.110190] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) vm-test-run-wal2json> server # [ 0.110219] CPU features: detected: Enhanced Privileged Access Never vm-test-run-wal2json> server # [ 0.110245] CPU features: detected: Enhanced Virtualization Traps vm-test-run-wal2json> server # [ 0.110271] CPU features: detected: Fine Grained Traps vm-test-run-wal2json> server # [ 0.110332] CPU features: detected: Generic authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.110424] CPU features: detected: RCpc load-acquire (LDAPR) vm-test-run-wal2json> server # [ 0.110473] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2) vm-test-run-wal2json> server # [ 0.110503] CPU features: detected: LSE atomic instructions vm-test-run-wal2json> server # [ 0.110529] CPU features: detected: Memory Copy and Memory Set instructions vm-test-run-wal2json> server # [ 0.110556] CPU features: detected: Privileged Access Never vm-test-run-wal2json> server # [ 0.110577] CPU features: detected: RAS Extension Support vm-test-run-wal2json> server # [ 0.110600] CPU features: detected: Random Number Generator vm-test-run-wal2json> server # [ 0.110624] CPU features: detected: Speculation barrier (SB) vm-test-run-wal2json> server # [ 0.110645] CPU features: detected: Stage-2 Force Write-Back vm-test-run-wal2json> server # [ 0.110669] CPU features: detected: Trap EL0 IMPLEMENTATION DEFINED functionality vm-test-run-wal2json> server # [ 0.110697] CPU features: detected: TLB range maintenance instructions vm-test-run-wal2json> server # [ 0.110725] CPU features: detected: WFx with timeout vm-test-run-wal2json> server # [ 0.110763] CPU features: detected: Speculative Store Bypassing Safe (SSBS) vm-test-run-wal2json> server # [ 0.110791] CPU features: detected: Scalable Vector Extension vm-test-run-wal2json> server # [ 0.119017] alternatives: applying system-wide alternatives vm-test-run-wal2json> server # [ 0.140176] CPU features: detected: Hardware dirty bit management on CPU0-1 vm-test-run-wal2json> server # [ 0.140922] SVE: maximum available vector length 256 bytes per vector vm-test-run-wal2json> server # [ 0.141011] SVE: default vector length 64 bytes per vector vm-test-run-wal2json> server # [ 0.152531] Memory: 3922884K/4194304K available (23296K kernel code, 6546K rwdata, 24596K rodata, 4416K init, 1047K bss, 223164K reserved, 32768K cma-reserved) vm-test-run-wal2json> server # [ 0.176941] devtmpfs: initialized vm-test-run-wal2json> server # [ 0.206719] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns vm-test-run-wal2json> server # [ 0.207209] futex hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.210780] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL vm-test-run-wal2json> server # [ 0.210861] 0 pages in range for non-PLT usage vm-test-run-wal2json> server # [ 0.210903] 509248 pages in range for PLT usage vm-test-run-wal2json> server # [ 0.213653] pinctrl core: initialized pinctrl subsystem vm-test-run-wal2json> server # [ 0.225523] DMI not present or invalid. vm-test-run-wal2json> server # [ 0.245978] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-wal2json> server # [ 0.258839] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations vm-test-run-wal2json> server # [ 0.260321] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-wal2json> server # [ 0.261811] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-wal2json> server # [ 0.262106] audit: initializing netlink subsys (disabled) vm-test-run-wal2json> server # [ 0.264524] audit: type=2000 audit(0.200:1): state=initialized audit_enabled=0 res=1 vm-test-run-wal2json> server # [ 0.270507] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-wal2json> server # [ 0.270560] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-wal2json> server # [ 0.270617] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-wal2json> server # [ 0.270647] thermal_sys: Registered thermal governor 'user_space' vm-test-run-wal2json> server # [ 0.270671] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-wal2json> server # [ 0.271491] cpuidle: using governor ladder vm-test-run-wal2json> server # [ 0.272164] cpuidle: using governor menu vm-test-run-wal2json> server # [ 0.274308] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. vm-test-run-wal2json> server # [ 0.275096] ASID allocator initialised with 65536 entries vm-test-run-wal2json> server # [ 0.283606] Serial: AMBA PL011 UART driver vm-test-run-wal2json> server # [ 0.334121] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 vm-test-run-wal2json> server # [ 0.335689] printk: legacy console [ttyAMA0] enabled vm-test-run-wal2json> server # [ 0.374831] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.375028] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-wal2json> server # [ 0.375138] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.375237] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page vm-test-run-wal2json> server # [ 0.375334] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.376037] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-wal2json> server # [ 0.376352] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.376459] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page vm-test-run-wal2json> server # [ 0.389641] fbcon: Taking over console vm-test-run-wal2json> server # [ 0.390222] ACPI: Interpreter disabled. vm-test-run-wal2json> server # [ 0.397770] iommu: Default domain type: Translated vm-test-run-wal2json> server # [ 0.397932] iommu: DMA domain TLB invalidation policy: strict mode vm-test-run-wal2json> server # [ 0.405638] SCSI subsystem initialized vm-test-run-wal2json> server # [ 0.408668] usbcore: registered new interface driver usbfs vm-test-run-wal2json> server # [ 0.408992] usbcore: registered new interface driver hub vm-test-run-wal2json> server # [ 0.409199] usbcore: registered new device driver usb vm-test-run-wal2json> server # [ 0.411228] pps_core: LinuxPPS API ver. 1 registered vm-test-run-wal2json> server # [ 0.411323] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti vm-test-run-wal2json> server # [ 0.412355] PTP clock support registered vm-test-run-wal2json> server # [ 0.412840] EDAC MC: Ver: 3.0.0 vm-test-run-wal2json> server # [ 0.414838] scmi_core: SCMI protocol bus registered vm-test-run-wal2json> server # [ 0.417651] FPGA manager framework vm-test-run-wal2json> server # [ 0.418801] Advanced Linux Sound Architecture Driver Initialized. vm-test-run-wal2json> server # [ 0.427790] vgaarb: loaded vm-test-run-wal2json> server # [ 0.432514] clocksource: Switched to clocksource arch_sys_counter vm-test-run-wal2json> server # [ 0.435358] VFS: Disk quotas dquot_6.6.0 vm-test-run-wal2json> server # [ 0.435954] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-wal2json> server # [ 0.440023] netfs: FS-Cache loaded vm-test-run-wal2json> server # [ 0.442300] pnp: PnP ACPI: disabled vm-test-run-wal2json> server # [ 0.479339] NET: Registered PF_INET protocol family vm-test-run-wal2json> server # [ 0.482173] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-wal2json> server # [ 0.607705] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.608102] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.609386] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.610622] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) vm-test-run-wal2json> server # [ 0.611847] TCP: Hash tables configured (established 32768 bind 32768) vm-test-run-wal2json> server # [ 0.614097] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear) vm-test-run-wal2json> server # [ 0.614863] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.616002] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.618053] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-wal2json> server # [ 0.618499] NET: Registered PF_XDP protocol family vm-test-run-wal2json> server # [ 0.618987] PCI: CLS 0 bytes, default 64 vm-test-run-wal2json> server # [ 0.622144] kvm [1]: HYP mode not available vm-test-run-wal2json> server # [ 0.624383] Trying to unpack rootfs image as initramfs... vm-test-run-wal2json> server # [ 0.745805] Initialise system trusted keyrings vm-test-run-wal2json> server # [ 0.748130] workingset: timestamp_bits=42 max_order=20 bucket_order=0 vm-test-run-wal2json> server # [ 0.752254] squashfs: version 4.0 (2009/01/31) Phillip Lougher vm-test-run-wal2json> server # [ 0.754266] 9p: Installing v9fs 9p2000 file system support vm-test-run-wal2json> server # [ 0.821973] Key type asymmetric registered vm-test-run-wal2json> server # [ 0.822230] Asymmetric key parser 'x509' registered vm-test-run-wal2json> server # [ 0.822677] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) vm-test-run-wal2json> server # [ 0.824261] io scheduler mq-deadline registered vm-test-run-wal2json> server # [ 0.825208] io scheduler kyber registered vm-test-run-wal2json> server # [ 0.853913] pl061_gpio 9030000.pl061: PL061 GPIO chip registered vm-test-run-wal2json> server # [ 0.862232] ledtrig-cpu: registered to indicate activity on CPUs vm-test-run-wal2json> server # [ 0.866836] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: vm-test-run-wal2json> server # [ 0.867942] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 vm-test-run-wal2json> server # [ 0.868884] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 vm-test-run-wal2json> server # [ 0.869490] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 vm-test-run-wal2json> server # [ 0.870271] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits vm-test-run-wal2json> server # [ 0.870852] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] vm-test-run-wal2json> server # [ 0.873446] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 vm-test-run-wal2json> server # [ 0.873898] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-wal2json> server # [ 0.874054] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.874182] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.874291] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.875680] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.879271] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.879816] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.880394] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.882122] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.882668] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.883915] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.884369] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.884570] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.884700] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.886620] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.886848] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.886958] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.887079] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.887939] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.888109] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.888211] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.888323] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.889326] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.889919] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.890248] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.890369] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.890882] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.891212] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] vm-test-run-wal2json> server # [ 0.891321] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.891669] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.892457] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.893672] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.893791] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.893920] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.894047] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.894623] pci 0000:00:08.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.895174] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.895320] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.895954] pci 0000:00:09.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.896116] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.896231] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.896790] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.897210] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.897689] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.897865] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.897965] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.898075] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.898527] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.898851] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.899060] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.899194] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.902460] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned vm-test-run-wal2json> server # [ 0.902747] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned vm-test-run-wal2json> server # [ 0.902914] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.903127] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.903284] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.903535] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.903688] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.903827] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.903958] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.904331] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.905564] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.906025] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.906196] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.906331] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned vm-test-run-wal2json> server # [ 0.906477] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned vm-test-run-wal2json> server # [ 0.906625] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned vm-test-run-wal2json> server # [ 0.906750] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned vm-test-run-wal2json> server # [ 0.906858] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned vm-test-run-wal2json> server # [ 0.907489] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned vm-test-run-wal2json> server # [ 0.907793] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned vm-test-run-wal2json> server # [ 0.908180] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned vm-test-run-wal2json> server # [ 0.908299] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned vm-test-run-wal2json> server # [ 0.908406] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned vm-test-run-wal2json> server # [ 0.908517] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned vm-test-run-wal2json> server # [ 0.908623] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned vm-test-run-wal2json> server # [ 0.909829] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned vm-test-run-wal2json> server # [ 0.910203] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned vm-test-run-wal2json> server # [ 0.910327] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned vm-test-run-wal2json> server # [ 0.910431] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned vm-test-run-wal2json> server # [ 0.910534] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned vm-test-run-wal2json> server # [ 0.910637] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned vm-test-run-wal2json> server # [ 0.910742] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned vm-test-run-wal2json> server # [ 0.910843] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned vm-test-run-wal2json> server # [ 0.910945] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned vm-test-run-wal2json> server # [ 0.911245] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.911364] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.911769] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.913248] pci 0000:00:0a.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.974312] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.980167] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.984212] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.987533] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.990471] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.992458] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.997847] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 1.000251] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 1.002591] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 1.005592] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 1.009116] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 1.027126] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-wal2json> server # [ 1.037533] msm_serial: driver initialized vm-test-run-wal2json> server # [ 1.038851] SuperH (H)SCI(F) driver initialized vm-test-run-wal2json> server # [ 1.039297] STM32 USART driver initialized vm-test-run-wal2json> server # [ 1.094531] loop: module loaded vm-test-run-wal2json> server # [ 1.095155] virtio_blk virtio5: 2/0/0 default/read/poll queues vm-test-run-wal2json> server # [ 1.099228] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-wal2json> server # [ 1.101322] Freeing initrd memory: 10684K vm-test-run-wal2json> server # [ 1.111880] megasas: 07.727.03.00-rc1 vm-test-run-wal2json> server # [ 1.118122] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] vm-test-run-wal2json> server # [ 1.121151] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.122132] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.124634] Using buffer write method vm-test-run-wal2json> server # [ 1.125677] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] vm-test-run-wal2json> server # [ 1.126664] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.127025] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.128642] Using buffer write method vm-test-run-wal2json> server # [ 1.129299] Concatenating MTD devices: vm-test-run-wal2json> server # [ 1.129393] (0): "0.flash" vm-test-run-wal2json> server # [ 1.129456] (1): "0.flash" vm-test-run-wal2json> server # [ 1.129516] into device "0.flash" vm-test-run-wal2json> server # [ 1.155803] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-wal2json> server # [ 1.169481] thunder_xcv, ver 1.0 vm-test-run-wal2json> server # [ 1.169736] thunder_bgx, ver 1.0 vm-test-run-wal2json> server # [ 1.170387] nicpf, ver 1.0 vm-test-run-wal2json> server # [ 1.173865] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version vm-test-run-wal2json> server # [ 1.174037] hns3: Copyright (c) 2017 Huawei Corporation. vm-test-run-wal2json> server # [ 1.174443] hclge is initializing vm-test-run-wal2json> server # [ 1.174944] e1000: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.175051] e1000: Copyright (c) 1999-2006 Intel Corporation. vm-test-run-wal2json> server # [ 1.175281] e1000e: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.175530] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. vm-test-run-wal2json> server # [ 1.175787] igb: Intel(R) Gigabit Ethernet Network Driver vm-test-run-wal2json> server # [ 1.175887] igb: Copyright (c) 2007-2014 Intel Corporation. vm-test-run-wal2json> server # [ 1.176084] igbvf: Intel(R) Gigabit Virtual Function Network Driver vm-test-run-wal2json> server # [ 1.176185] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. vm-test-run-wal2json> server # [ 1.177371] sky2: driver version 1.30 vm-test-run-wal2json> server # [ 1.185534] ehci-pci 0000:00:0a.0: EHCI Host Controller vm-test-run-wal2json> server # [ 1.187689] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 vm-test-run-wal2json> server # [ 1.189408] usbcore: registered new interface driver usb-storage vm-test-run-wal2json> server # [ 1.190559] usbcore: registered new interface driver usbserial_generic vm-test-run-wal2json> server # [ 1.190993] usbserial: USB Serial support registered for generic vm-test-run-wal2json> server # [ 1.191220] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 vm-test-run-wal2json> server # [ 1.201247] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 vm-test-run-wal2json> server # [ 1.202613] rtc-pl031 9010000.pl031: registered as rtc0 vm-test-run-wal2json> server # [ 1.203678] rtc-pl031 9010000.pl031: setting system clock to 2026-11-16T07:33:46 UTC (1794814426) vm-test-run-wal2json> server # [ 1.205878] i2c_dev: i2c /dev entries driver vm-test-run-wal2json> server # [ 1.209073] hub 1-0:1.0: USB hub found vm-test-run-wal2json> server # [ 1.209641] hub 1-0:1.0: 6 ports detected vm-test-run-wal2json> server # [ 1.223959] sdhci: Secure Digital Host Controller Interface driver vm-test-run-wal2json> server # [ 1.224141] sdhci: Copyright(c) Pierre Ossman vm-test-run-wal2json> server # [ 1.225661] Synopsys Designware Multimedia Card Interface Driver vm-test-run-wal2json> server # [ 1.227634] sdhci-pltfm: SDHCI platform and OF driver helper vm-test-run-wal2json> server # [ 1.235284] hid: raw HID events driver (C) Jiri Kosina vm-test-run-wal2json> server # [ 1.237664] usbcore: registered new interface driver usbhid vm-test-run-wal2json> server # [ 1.237875] usbhid: USB HID core driver vm-test-run-wal2json> server # [ 1.246627] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available vm-test-run-wal2json> server # [ 1.260223] drop_monitor: Initializing network drop monitor service vm-test-run-wal2json> server # [ 1.261814] NET: Registered PF_INET6 protocol family vm-test-run-wal2json> server # [ 1.285441] Segment Routing with IPv6 vm-test-run-wal2json> server # [ 1.285860] In-situ OAM (IOAM) with IPv6 vm-test-run-wal2json> server # [ 1.286457] NET: Registered PF_PACKET protocol family vm-test-run-wal2json> server # [ 1.288705] 9pnet: Installing 9P2000 support vm-test-run-wal2json> server # [ 1.294309] Key type dns_resolver registered vm-test-run-wal2json> server # [ 1.334875] registered taskstats version 1 vm-test-run-wal2json> server # [ 1.337624] Loading compiled-in X.509 certificates vm-test-run-wal2json> server # [ 1.398305] Demotion targets for Node 0: null vm-test-run-wal2json> server # [ 1.401343] Key type .fscrypt registered vm-test-run-wal2json> server # [ 1.401493] Key type fscrypt-provisioning registered vm-test-run-wal2json> server # [ 1.412165] input: gpio-keys as /devices/platform/gpio-keys/input/input0 vm-test-run-wal2json> server # [ 1.461448] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-wal2json> server # [ 1.462646] clk: Disabling unused clocks vm-test-run-wal2json> server # [ 1.463218] PM: genpd: Disabling unused power domains vm-test-run-wal2json> server # [ 1.465799] ALSA device list: vm-test-run-wal2json> server # [ 1.465996] No soundcards found. vm-test-run-wal2json> server # [ 1.553529] Freeing unused kernel memory: 4416K vm-test-run-wal2json> server # [ 1.555020] Run /init as init process vm-test-run-wal2json> server # [ 1.647648] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 vm-test-run-wal2json> server # [ 1.791170] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 vm-test-run-wal2json> server # [ 1.912975] usb 1-2: new high-speed USB device number 3 using ehci-pci vm-test-run-wal2json> server # [ 2.095571] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 vm-test-run-wal2json> server # [ 2.100866] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 vm-test-run-wal2json> server # [ 2.235908] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev vm-test-run-wal2json> server # [ 2.373276] [drm] pci: virtio-gpu-pci detected at 0000:00:09.0 vm-test-run-wal2json> server # [ 2.374199] [drm] features: -virgl +edid -resource_blob -host_visible vm-test-run-wal2json> server # [ 2.374227] [drm] features: -context_init vm-test-run-wal2json> server # [ 2.376212] [drm] number of scanouts: 1 vm-test-run-wal2json> server # [ 2.376335] [drm] number of cap sets: 0 vm-test-run-wal2json> server # [ 2.388693] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:09.0 on minor 0 vm-test-run-wal2json> server # [ 2.422808] Console: switching to colour frame buffer device 160x50 vm-test-run-wal2json> server # [ 2.433533] virtio-pci 0000:00:09.0: [drm] fb0: virtio_gpudrmfb frame buffer device vm-test-run-wal2json> server # [ 5.638797] EXT4-fs (vda): mounted filesystem 77a016ab-854b-4f87-95df-093e91b74667 r/w with ordered data mode. Quota mode: none. vm-test-run-wal2json> server # [ 8.417101] EXT4-fs (vda): re-mounted 77a016ab-854b-4f87-95df-093e91b74667. vm-test-run-wal2json> server # [ 8.438504] booting system configuration /nix/store/jw3gakad9xzrps7zrfw0b9rj0945fvbn-nixos-system-server-test vm-test-run-wal2json> server # [ 23.302824] systemd[1]: systemd 258.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) vm-test-run-wal2json> server # [ 23.314087] systemd[1]: Detected virtualization qemu. vm-test-run-wal2json> server # [ 23.319640] systemd[1]: Detected architecture arm64. vm-test-run-wal2json> server # [ 23.325711] systemd[1]: Detected first boot. vm-test-run-wal2json> server # [ 23.360907] systemd[1]: Initializing machine ID from random generator. vm-test-run-wal2json> server # [ 23.397716] systemd[1]: Hostname set to . vm-test-run-wal2json> server # [ 24.780599] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-wal2json> server # [ 26.509851] NET: Registered PF_VSOCK protocol family vm-test-run-wal2json> server # [ 26.571537] Guest personality initialized and is inactive vm-test-run-wal2json> server # [ 26.579269] VMCI host device registered (name=vmci, major=10, minor=261) vm-test-run-wal2json> server # [ 26.582576] Initialized host personality vm-test-run-wal2json> server # [ 26.873860] systemd[1]: Applying preset policy. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 31.309644] systemd[1]: Populated /etc with preset unit settings. vm-test-run-wal2json> server # [ 35.412338] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-wal2json> server # [ 35.653874] systemd[1]: Created slice Slice /system/getty. vm-test-run-wal2json> server # [ 35.670398] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-wal2json> server # [ 35.685756] systemd[1]: Created slice User and Session Slice. vm-test-run-wal2json> server # [ 35.694618] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-wal2json> server # [ 35.701520] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-wal2json> server # [ 35.706475] systemd[1]: Expecting device /dev/hvc0... vm-test-run-wal2json> server # [ 35.712363] systemd[1]: Expecting device /dev/ttyAMA0... vm-test-run-wal2json> server # [ 35.717864] systemd[1]: Expecting device /sys/subsystem/net/devices/eth1... vm-test-run-wal2json> server # [ 35.721772] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-wal2json> server # [ 35.726416] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-wal2json> server # [ 35.731660] systemd[1]: Reached target Path Units. vm-test-run-wal2json> server # [ 35.737163] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 35.742332] systemd[1]: Reached target Slice Units. vm-test-run-wal2json> server # [ 35.747524] systemd[1]: Reached target Swaps. vm-test-run-wal2json> server # [ 35.786506] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-wal2json> server # [ 35.812605] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-wal2json> server # [ 35.824800] systemd[1]: Listening on Journal Audit Socket. vm-test-run-wal2json> server # [ 35.831952] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-wal2json> server # [ 35.839011] systemd[1]: Listening on Journal Sockets. vm-test-run-wal2json> server # [ 35.847640] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-wal2json> server # [ 35.852510] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 35.859788] systemd[1]: Listening on udev Control Socket. vm-test-run-wal2json> server # [ 35.866721] systemd[1]: Listening on udev Kernel Socket. vm-test-run-wal2json> server # [ 35.917131] systemd[1]: Mounting Huge Pages File System... vm-test-run-wal2json> server # [ 35.957591] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-wal2json> server # [ 36.002360] systemd[1]: Mounting Kernel Debug File System... vm-test-run-wal2json> server # [ 36.091895] systemd[1]: Mounting Kernel Trace File System... vm-test-run-wal2json> server # [ 36.207794] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-wal2json> server # [ 36.344833] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-wal2json> server # [ 36.359762] systemd[1]: Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs). vm-test-run-wal2json> server # [ 36.468091] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-wal2json> server # [ 36.478196] systemd[1]: Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm). vm-test-run-wal2json> server # [ 36.499053] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 36.675569] systemd[1]: Starting Load Kernel Module fuse... vm-test-run-wal2json> server # [ 36.686856] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 36.694929] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 36.790612] systemd[1]: Starting Journal Service... vm-test-run-wal2json> server # [ 36.887634] systemd[1]: Starting Load Kernel Modules... vm-test-run-wal2json> server # [ 36.962721] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-wal2json> server # [ 37.021299] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-wal2json> server # [ 37.026248] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 37.082635] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-wal2json> server # [ 37.186584] systemd[1]: Mounted Huge Pages File System. vm-test-run-wal2json> server # [ 37.195965] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-wal2json> server # [ 37.213888] systemd[1]: Mounted Kernel Debug File System. vm-test-run-wal2json> server # [ 37.227026] systemd[1]: Mounted Kernel Trace File System. vm-test-run-wal2json> server # [ 37.259721] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-wal2json> server # [ 37.288043] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-wal2json> server # [ 37.384219] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-wal2json> server # [ 37.925329] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-wal2json> server # [ 37.941506] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-wal2json> server # [ 38.435653] systemd[1]: Finished Load Kernel Modules. vm-test-run-wal2json> server # [ 38.497573] systemd[1]: Starting Firewall... vm-test-run-wal2json> server # [ 38.497725] EXT4-fs (vda): re-mounted 77a016ab-854b-4f87-95df-093e91b74667. vm-test-run-wal2json> server # [ 38.533534] fuse: init (API version 7.41) vm-test-run-wal2json> server # [ 38.546535] systemd[1]: Starting Apply Kernel Variables... vm-test-run-wal2json> server # [ 38.644398] systemd[1]: modprobe@fuse.service: Deactivated successfully. vm-test-run-wal2json> server # [ 38.667908] systemd[1]: Finished Load Kernel Module fuse. vm-test-run-wal2json> server # [ 38.719028] systemd[1]: Mounting FUSE Control File System... vm-test-run-wal2json> server # [ 38.745797] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-wal2json> server # [ 38.763361] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 38.867444] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-wal2json> server # [ 38.885642] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 38.938559] systemd-journald[397]: Collecting audit messages is enabled. vm-test-run-wal2json> server # [ 39.047307] systemd[1]: Mounted FUSE Control File System. vm-test-run-wal2json> server # [ 39.989962] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-wal2json> server # [ 40.038459] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-wal2json> server # [ 40.046975] systemd[1]: Reached target First Boot Complete. vm-test-run-wal2json> server # [ 40.099861] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-wal2json> server # [ 40.456069] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-wal2json> server # [ 40.488293] systemd[1]: Finished Apply Kernel Variables. vm-test-run-wal2json> server # [ 41.439982] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-wal2json> server # [ 41.469494] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-wal2json> server # [ 41.511045] systemd[1]: Mounting /run/wrappers... vm-test-run-wal2json> server # [ 41.581829] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-wal2json> server # [ 41.883010] systemd[1]: Started Journal Service. vm-test-run-wal2json> server # [ 41.850803] systemd-modules-load[398]: Module 'atkbd' is built in vm-test-run-wal2json> server # [ 41.885769] systemd-modules-load[398]: Module 'loop' is built in vm-test-run-wal2json> server # [ 41.930024] systemd-oomd[399]: No swap; memory pressure usage will be degraded vm-test-run-wal2json> server # [ 41.991452] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-wal2json> server # [ 42.001962] systemd[1]: Mounted /run/wrappers. vm-test-run-wal2json> server # [ 42.074106] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 42.119399] systemd[1]: Listening on Boot Entries Service Socket. vm-test-run-wal2json> server # [ 42.150782] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 42.206681] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 42.271289] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-wal2json> server # [ 43.033948] systemd-journald[397]: Received client request to flush runtime journal. vm-test-run-wal2json> server # [ 43.706738] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-wal2json> server # [ 43.769018] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-wal2json> server # [ 43.798349] systemd-udevd[426]: Using default interface naming scheme 'v258'. vm-test-run-wal2json> server # [ 43.837648] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-wal2json> server # [ 43.849938] systemd[1]: Starting Create System Files and Directories... vm-test-run-wal2json> server # [ 46.109673] systemd[1]: Finished Create System Files and Directories. vm-test-run-wal2json> server # [ 46.177557] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-wal2json> server # [ 46.227070] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-wal2json> server # [ 46.569170] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-wal2json> server # [ 47.286755] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-wal2json> server # [ 48.550007] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-wal2json> server # [ 48.589441] systemd[1]: Starting Update is Completed... vm-test-run-wal2json> server # [ 49.408838] systemd[1]: Finished Update is Completed. vm-test-run-wal2json> server # [ 53.653280] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 53.658244] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 53.665847] systemd[1]: suid-sgid-wrappers.service: Consumed 3.120s CPU time, 5.5M memory peak. vm-test-run-wal2json> server # [ 57.178513] systemd[1]: Finished Firewall. vm-test-run-wal2json> server # [ 58.870508] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-wal2json> server # [ 58.879519] systemd[1]: Reached target System Initialization. vm-test-run-wal2json> server # [ 58.893912] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-wal2json> server # [ 58.895839] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-wal2json> server # [ 58.909624] systemd[1]: Reached target Timer Units. vm-test-run-wal2json> server # [ 58.919011] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-wal2json> server # [ 58.930674] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-wal2json> server # [ 58.946960] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-wal2json> server # [ 59.005289] systemd[1]: Starting OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK)... vm-test-run-wal2json> server # [ 59.017439] systemd[1]: Listening on Hostname Service Socket. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 59.200108] (sh-issue)[634]: sshd-vsock.socket: Unable to locate executable '/usr/lib/systemd/systemd-ssh-issue': No such file or directory vm-test-run-wal2json> server # [ 59.239727] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK). vm-test-run-wal2json> server # [ 59.248145] systemd[1]: Reached target Socket Units. vm-test-run-wal2json> server # [ 59.253990] systemd[1]: Reached target Basic System. vm-test-run-wal2json> server # [ 59.294937] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-wal2json> server # [ 59.351756] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-wal2json> server # [ 59.420665] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 59.494408] systemd[1]: Started Reset console on configuration changes. vm-test-run-wal2json> server # [ 59.548332] systemd[1]: Starting resolvconf update... vm-test-run-wal2json> server # [ 59.618662] systemd[1]: Starting SSH Host Keys Generation... vm-test-run-wal2json> server # [ 61.039967] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-wal2json> server # [ 61.320154] dbus-daemon[636]: dbus[636]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 61.431492] nsncd[638]: Nov 16 07:34:46.693 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 61.459896] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 61.483936] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 61.486909] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 61.519067] systemd[1]: Starting User Login Management... vm-test-run-wal2json> server # [ 62.211986] systemd[1]: Started D-Bus System Message Bus. vm-test-run-wal2json> server # [ 63.369905] systemd-logind[665]: New seat seat0. vm-test-run-wal2json> server # [ 63.414337] systemd[1]: Started User Login Management. vm-test-run-wal2json> server # [ 63.461466] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 63.828214] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 63.861038] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-wal2json> server # [ 63.868112] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-wal2json> server # [ 63.886048] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-wal2json> server # [ 63.901300] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 63.974229] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-wal2json> server # [ 63.996821] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 64.164281] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 64.297890] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 64.313292] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 64.940057] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 64.954245] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 64.986580] nsncd[714]: Nov 16 07:34:50.321 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 64.990243] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 65.713926] systemd[1]: Finished resolvconf update. vm-test-run-wal2json> server # [ 65.733419] systemd[1]: Reached target Preparation for Network. vm-test-run-wal2json> server # [ 65.805498] systemd[1]: Starting DHCP Client... vm-test-run-wal2json> server # [ 67.762709] dhcpcd[754]: dhcpcd-10.2.4 starting vm-test-run-wal2json> server # [ 67.887493] dhcpcd[776]: dev: loaded udev vm-test-run-wal2json> server # [ 68.288466] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-wal2json> server # [ 68.534050] sshd-keygen-start[667]: Generating public/private rsa key pair. vm-test-run-wal2json> server # [ 68.536597] sshd-keygen-start[667]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key vm-test-run-wal2json> server # [ 68.538052] sshd-keygen-start[667]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub vm-test-run-wal2json> server # [ 68.541130] sshd-keygen-start[667]: The key fingerprint is: vm-test-run-wal2json> server # [ 68.543619] sshd-keygen-start[667]: SHA256:enVVb6/q+bsu+i+0CjR9LZvXQTV9t+cwVzir06fwvko root@server vm-test-run-wal2json> server # [ 68.546533] sshd-keygen-start[667]: The key's randomart image is: vm-test-run-wal2json> server # [ 68.548003] sshd-keygen-start[667]: +---[RSA 4096]----+ vm-test-run-wal2json> server # [ 68.550204] sshd-keygen-start[667]: | o+| vm-test-run-wal2json> server # [ 68.553827] sshd-keygen-start[667]: | o.O| vm-test-run-wal2json> server # [ 68.556386] sshd-keygen-start[667]: | .+B| vm-test-run-wal2json> server # [ 68.559661] sshd-keygen-start[667]: | . o=o+| vm-test-run-wal2json> server # [ 68.579257] sshd-keygen-start[667]: | S o +o.*o| vm-test-run-wal2json> server # [ 68.585624] sshd-keygen-start[667]: | o o o=+.o+| vm-test-run-wal2json> server # [ 68.589068] sshd-keygen-start[667]: | . o .E=oo.| vm-test-run-wal2json> server # [ 68.596908] sshd-keygen-start[667]: | . . .++o | vm-test-run-wal2json> server # [ 68.598134] sshd-keygen-start[667]: | o=*OO+ | vm-test-run-wal2json> server # [ 68.603697] sshd-keygen-start[667]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 68.908335] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-wal2json> server # [ 69.270445] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-wal2json> server # [ 69.280022] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-wal2json> server # [ 69.304939] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 vm-test-run-wal2json> server # [ 69.313195] cfg80211: failed to load regulatory.db vm-test-run-wal2json> server # [ 69.455563] sshd-keygen-start[787]: Generating public/private ed25519 key pair. vm-test-run-wal2json> server # [ 69.462200] sshd-keygen-start[787]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key vm-test-run-wal2json> server # [ 69.465325] sshd-keygen-start[787]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub vm-test-run-wal2json> server # [ 69.475889] sshd-keygen-start[787]: The key fingerprint is: vm-test-run-wal2json> server # [ 69.484878] sshd-keygen-start[787]: SHA256:ZKDrFDgkJeT4XtqVVyoso81xx4j0tHvd2o5im9fcuhc root@server vm-test-run-wal2json> server # [ 69.487572] sshd-keygen-start[787]: The key's randomart image is: vm-test-run-wal2json> server # [ 69.490617] sshd-keygen-start[787]: +--[ED25519 256]--+ vm-test-run-wal2json> server # [ 69.492880] sshd-keygen-start[787]: |+oo . | vm-test-run-wal2json> server # [ 69.494264] sshd-keygen-start[787]: |o+ . . . | vm-test-run-wal2json> server # [ 69.495106] sshd-keygen-start[787]: |..o + . o . | vm-test-run-wal2json> server # [ 69.495740] sshd-keygen-start[787]: | . o B B o | vm-test-run-wal2json> server # [ 69.496336] sshd-keygen-start[787]: | . O X S | vm-test-run-wal2json> server # [ 69.499495] sshd-keygen-start[787]: | . X * = . . E | vm-test-run-wal2json> server # [ 69.502529] sshd-keygen-start[787]: | + = . . .o.. . | vm-test-run-wal2json> server # [ 69.506281] sshd-keygen-start[787]: | .o..+o o | vm-test-run-wal2json> server # [ 69.507812] sshd-keygen-start[787]: | .o+o.=+ | vm-test-run-wal2json> server # [ 69.511636] sshd-keygen-start[787]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 69.527384] systemd[1]: sshd-keygen.service: Deactivated successfully. vm-test-run-wal2json> server # [ 69.537841] systemd[1]: Finished SSH Host Keys Generation. vm-test-run-wal2json> server # [ 69.546179] systemd[1]: sshd-keygen.service: Consumed 4.263s CPU time, 2.9M memory peak. vm-test-run-wal2json> server # [ 70.284042] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-wal2json> server # [ 70.232539] dhcpcd[776]: eth0: waiting for carrier vm-test-run-wal2json> server # [ 70.247051] dhcpcd[776]: libudev: received NULL device vm-test-run-wal2json> server # [ 70.255412] dhcpcd[776]: libudev: received NULL device vm-test-run-wal2json> server # [ 70.256884] dhcpcd[776]: eth0: carrier acquired vm-test-run-wal2json> server # [ 70.445837] dhcpcd[776]: DUID 00:01:00:01:32:8d:6e:9f:52:54:00:12:34:56 vm-test-run-wal2json> server # [ 70.448069] dhcpcd[776]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 70.465775] dhcpcd[776]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-wal2json> server # [ 71.190790] systemd[1]: Found device /dev/hvc0. vm-test-run-wal2json> server # [ 71.296360] dhcpcd[776]: eth0: soliciting a DHCP lease vm-test-run-wal2json> server # [ 71.333755] dhcpcd[776]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-wal2json> server # [ 71.362507] dhcpcd[776]: eth0: probing address 10.0.2.15/24 vm-test-run-wal2json> server # [ 72.691432] dhcpcd[776]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 72.715467] dhcpcd[776]: eth0: Router Advertisement from fe80::2 vm-test-run-wal2json> server # [ 72.718191] dhcpcd[776]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-wal2json> server # [ 72.722528] dhcpcd[776]: eth0: adding route to fec0::/64 vm-test-run-wal2json> server # [ 72.730197] dhcpcd[776]: eth0: adding default route via fe80::2 vm-test-run-wal2json> server # [ 73.206271] systemd[1]: Found device /dev/ttyAMA0. vm-test-run-wal2json> server # [ 73.247729] systemd[1]: Started backdoor.service. vm-test-run-wal2json> server # [ 73.494617] (udev-worker)[832]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 73.764563] (udev-worker)[826]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-wal2json> server # [ 73.772124] (udev-worker)[826]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # connecting to host... vm-test-run-wal2json> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-wal2json> server: connected to guest root shell vm-test-run-wal2json> server: (connecting took 75.11 seconds) vm-test-run-wal2json> server: (finished: waiting for the VM to finish booting, in 75.11 seconds) vm-test-run-wal2json> server # [ 75.627780] dhcpcd[776]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 75.722606] systemd[1]: Found device Virtio network device. vm-test-run-wal2json> server # [ 75.794767] systemd[1]: Starting Address configuration of eth1... vm-test-run-wal2json> server # [ 76.242160] dhcpcd[776]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 76.821671] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-wal2json> server # [ 77.035437] network-addresses-eth1-start[860]: adding address 192.168.1.1/24... done vm-test-run-wal2json> server # [ 77.145112] dhcpcd[776]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 77.151884] dhcpcd[776]: eth0: adding route to 10.0.2.0/24 vm-test-run-wal2json> server # [ 77.158734] dhcpcd[776]: eth0: adding default route via 10.0.2.2 vm-test-run-wal2json> server # [ 77.215943] network-addresses-eth1-start[860]: adding address 2001:db8:1::1/64... done vm-test-run-wal2json> server # [ 77.547327] systemd[1]: Finished Address configuration of eth1. vm-test-run-wal2json> server # [ 77.607943] systemd[1]: Starting Networking Setup... vm-test-run-wal2json> server # [ 80.757831] dhcpcd[776]: eth0: rebinding lease of 10.0.2.15 vm-test-run-wal2json> server # [ 80.785245] systemd[1]: Started DHCP Client. vm-test-run-wal2json> server # [ 80.787199] dhcpcd[776]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 84.568731] systemd[1]: Finished Networking Setup. vm-test-run-wal2json> server # [ 84.574100] systemd[1]: Reached target Network. vm-test-run-wal2json> server # [ 84.665944] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 84.714090] systemd[1]: Starting SSH Daemon... vm-test-run-wal2json> server # [ 84.767219] systemd[1]: Starting Permit User Sessions... vm-test-run-wal2json> server # [ 85.621997] systemd[1]: Finished Permit User Sessions. vm-test-run-wal2json> server # [ 85.679271] systemd[1]: Started Getty on tty1. vm-test-run-wal2json> server # [ 85.692709] systemd[1]: Reached target Login Prompts. vm-test-run-wal2json> server # [ 85.993303] sshd[1057]: Server listening on 0.0.0.0 port 22. vm-test-run-wal2json> server # [ 85.995977] systemd[1]: Started SSH Daemon. vm-test-run-wal2json> server # [ 86.007330] sshd[1057]: Server listening on :: port 22. vm-test-run-wal2json> server # [ 86.312287] systemd-logind[665]: Watching system buttons on /dev/input/event0 (gpio-keys) vm-test-run-wal2json> server # [ 88.605776] postgresql-pre-start[1080]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 88.621358] postgresql-pre-start[1080]: This user must also own the server process. vm-test-run-wal2json> server # [ 88.731489] postgresql-pre-start[1080]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 88.737690] postgresql-pre-start[1080]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 88.738685] postgresql-pre-start[1080]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 88.739306] postgresql-pre-start[1080]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 88.739925] postgresql-pre-start[1080]: fixing permissions on existing directory /var/lib/postgresql/15 ... ok vm-test-run-wal2json> server # [ 88.762170] postgresql-pre-start[1080]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 88.781116] postgresql-pre-start[1080]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 89.901109] postgresql-pre-start[1080]: selecting default max_connections ... 100 vm-test-run-wal2json> server # [ 90.733609] postgresql-pre-start[1080]: selecting default shared_buffers ... 128MB vm-test-run-wal2json> server # [ 95.634781] mousedev: PS/2 mouse device common for all mice vm-test-run-wal2json> server # [ 101.271525] systemd-logind[665]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) vm-test-run-wal2json> server # [ 111.527778] postgresql-pre-start[1080]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 111.586612] postgresql-pre-start[1080]: creating configuration files ... ok vm-test-run-wal2json> server # [ 117.889879] postgresql-pre-start[1080]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 130.325390] postgresql-pre-start[1080]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 133.456364] postgresql-pre-start[1080]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 133.472864] postgresql-pre-start[1080]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 133.479622] postgresql-pre-start[1080]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 133.488617] postgresql-pre-start[1080]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 133.500261] postgresql-pre-start[1080]: /nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/bin/pg_ctl -D /var/lib/postgresql/15 -l logfile start vm-test-run-wal2json> server # [ 135.207376] postgres[1527]: [1527] LOG: starting PostgreSQL 15.20 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 135.218419] postgres[1527]: [1527] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 135.226663] postgres[1527]: [1527] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 135.245063] postgres[1527]: [1527] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 135.484042] postgres[1553]: [1553] LOG: database system was shut down at 2026-11-16 07:35:55 GMT vm-test-run-wal2json> server # [ 135.707802] postgres[1527]: [1527] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 135.800042] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 135.861371] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 137.335471] postgresql-setup-start[1573]: CREATE ROLE vm-test-run-wal2json> server # [ 137.681816] postgresql-setup-start[1575]: ALTER ROLE vm-test-run-wal2json> server # [ 137.764904] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 137.766889] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 137.768289] systemd[1]: Reached target Multi-User System. vm-test-run-wal2json> server # [ 137.782658] systemd[1]: Startup finished in 22.379s (kernel) + 1min 55.388s (userspace) = 2min 17.768s. vm-test-run-wal2json> server: (finished: waiting for unit multi-user.target, in 139.48 seconds) vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 1.07 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.44 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 15 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.48 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.76 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.63 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 15, in 1.87 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 15 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" vm-test-run-wal2json> server # [ 142.664434] sudo[1642]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 wal2json vm-test-run-wal2json> server # [ 142.844134] sudo[1642]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # pg_regress: could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 143.637686] postgres[1649]: [1649] LOG: logical decoding found consistent point at 0/153BF80 vm-test-run-wal2json> server # [ 143.646318] postgres[1649]: [1649] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 143.657330] postgres[1649]: [1649] STATEMENT: select vm-test-run-wal2json> server # [ 143.663697] postgres[1649]: 1 vm-test-run-wal2json> server # [ 143.673881] postgres[1649]: from vm-test-run-wal2json> server # [ 143.683505] postgres[1649]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 143.753386] postgres[1649]: [1649] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 143.754560] postgres[1649]: [1649] DETAIL: Streaming transactions committing after 0/153BFB8, reading WAL from 0/153BF80. vm-test-run-wal2json> server # [ 143.755113] postgres[1649]: [1649] STATEMENT: select vm-test-run-wal2json> server # [ 143.756960] postgres[1649]: data vm-test-run-wal2json> server # [ 143.761306] postgres[1649]: from vm-test-run-wal2json> server # [ 143.762632] postgres[1649]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 143.763809] postgres[1649]: 'reg_test', vm-test-run-wal2json> server # [ 143.765634] postgres[1649]: null, vm-test-run-wal2json> server # [ 143.766470] postgres[1649]: null, vm-test-run-wal2json> server # [ 143.766887] postgres[1649]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 143.767650] postgres[1649]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 143.773582] postgres[1649]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 143.774302] postgres[1649]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 143.775561] postgres[1649]: 'format-version', '2', vm-test-run-wal2json> server # [ 143.778346] postgres[1649]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 143.779832] postgres[1649]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 143.785688] postgres[1649]: ) x; vm-test-run-wal2json> server # [ 143.787300] postgres[1649]: [1649] LOG: logical decoding found consistent point at 0/153BF80 vm-test-run-wal2json> server # [ 143.787675] postgres[1649]: [1649] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 143.788272] postgres[1649]: [1649] STATEMENT: select vm-test-run-wal2json> server # [ 143.791787] postgres[1649]: data vm-test-run-wal2json> server # [ 143.793539] postgres[1649]: from vm-test-run-wal2json> server # [ 143.794495] postgres[1649]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 143.802373] postgres[1649]: 'reg_test', vm-test-run-wal2json> server # [ 143.803292] postgres[1649]: null, vm-test-run-wal2json> server # [ 143.803715] postgres[1649]: null, vm-test-run-wal2json> server # [ 143.804061] postgres[1649]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 143.804908] postgres[1649]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 143.806188] postgres[1649]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 143.813883] postgres[1649]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 143.815565] postgres[1649]: 'format-version', '2', vm-test-run-wal2json> server # [ 143.821421] postgres[1649]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 143.823408] postgres[1649]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 143.825016] postgres[1649]: ) x; vm-test-run-wal2json> server # [ 144.257888] sudo[1642]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" , in 2.48 seconds) vm-test-run-wal2json> (using postmaster on Unix socket, default port) vm-test-run-wal2json> ============== running regression test queries ============== vm-test-run-wal2json> test wal2json ... ok 991 ms vm-test-run-wal2json> vm-test-run-wal2json> ===================== vm-test-run-wal2json> All 1 tests passed. vm-test-run-wal2json> ===================== vm-test-run-wal2json> vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 15 after extension upgrade, in 2.48 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.44 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.48 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.45 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.38 seconds) vm-test-run-wal2json> subtest: switch to postgresql 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: [ 152.938817] nixos[1688]: switching to system configuration /nix/store/5wysm0jkv6jhg8698fqlw9nj21cr58pc-nixos-system-server-test vm-test-run-wal2json> server # postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 152.976096] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 152.981372] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 152.982917] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 152.997679] postgres[1527]: [1527] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 153.003110] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 153.008893] postgres[1527]: [1527] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 153.089021] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 153.117031] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 153.139607] postgres[1527]: [1527] LOG: background worker "logical replication launcher" (PID 1560) exited with exit code 1 vm-test-run-wal2json> server # [ 153.150923] postgres[1549]: [1549] LOG: shutting down vm-test-run-wal2json> server # [ 153.151744] postgres[1549]: [1549] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 153.346173] postgres[1549]: [1549] LOG: checkpoint complete: wrote 54 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.055 s, sync=0.073 s, total=0.200 s; sync files=48, longest=0.015 s, average=0.002 s; distance=149 kB, estimate=149 kB vm-test-run-wal2json> server # [ 153.434098] postgres[1527]: [1527] LOG: database system is shut down vm-test-run-wal2json> server # [ 153.514290] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 153.521549] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 153.530226] systemd[1]: postgresql.service: Consumed 25.454s CPU time, 92M memory peak, 46.2M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 159.763514] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:08.0/virtio7/input/input3 vm-test-run-wal2json> server # [ 160.145602] systemd[1]: Reload requested from client PID 1688 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 160.165119] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 166.313570] systemd[1]: Reloading finished in 6153 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 166.730067] systemd[1]: Starting Re-setup tmpfiles on a system that is already running.... vm-test-run-wal2json> server # [ 168.245167] systemd[1]: Finished Re-setup tmpfiles on a system that is already running.. vm-test-run-wal2json> server # [ 168.276084] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 168.331347] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 168.865349] dbus-daemon[636]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 169.132970] dbus-daemon[636]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 169.155365] dbus-send[1869]: method return time=1794814594.513248 sender=org.freedesktop.DBus -> destination=:1.5 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 169.244924] dbus-daemon[636]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 169.546060] dbus-daemon[636]: [system] Reloaded configuration vm-test-run-wal2json> server # starting the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 169.563109] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # [ 169.649724] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 169.731532] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 169.734012] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 169.832080] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 169.882807] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 169.887410] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 169.894619] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 169.909297] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 169.910224] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 169.911637] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 170.045445] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 170.156126] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 171.887888] postgresql-migrate-start[1897]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 171.899445] postgresql-migrate-start[1897]: This user must also own the server process. vm-test-run-wal2json> server # [ 172.013320] postgresql-migrate-start[1897]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 172.014464] postgresql-migrate-start[1897]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 172.021668] postgresql-migrate-start[1897]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 172.023720] postgresql-migrate-start[1897]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 172.024709] postgresql-migrate-start[1897]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 172.036874] postgresql-migrate-start[1897]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 172.037700] postgresql-migrate-start[1897]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 173.253669] postgresql-migrate-start[1897]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 174.506953] postgresql-migrate-start[1897]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 177.163371] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 177.207975] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 177.220150] systemd[1]: suid-sgid-wrappers.service: Consumed 2.738s CPU time, 3.4M memory peak. vm-test-run-wal2json> server # [ 177.253022] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 177.255773] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 177.734182] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 177.745667] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 181.983596] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 182.314961] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 182.354519] systemd[1]: Stopped Virtual Console Setup. vm-test-run-wal2json> server # [ 182.430762] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 187.135297] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-wal2json> server # [ 187.459500] systemd[1]: Finished Virtual Console Setup. vm-test-run-wal2json> server # [ 187.768018] postgresql-migrate-start[1897]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 187.805858] postgresql-migrate-start[1897]: creating configuration files ... ok vm-test-run-wal2json> server # [ 189.958278] systemd-logind[665]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-wal2json> server # [ 191.326091] postgresql-migrate-start[1897]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 196.817034] postgresql-migrate-start[1897]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 198.269890] postgresql-migrate-start[1897]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 198.270544] postgresql-migrate-start[1897]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 198.270883] postgresql-migrate-start[1897]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 198.271402] postgresql-migrate-start[1897]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 198.271741] postgresql-migrate-start[1897]: /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 201.873097] postgresql-migrate-start[2082]: Performing Consistency Checks vm-test-run-wal2json> server # [ 201.875606] postgresql-migrate-start[2082]: ----------------------------- vm-test-run-wal2json> server # [ 201.878778] postgresql-migrate-start[2082]: Checking cluster versions ok vm-test-run-wal2json> server # [ 204.076024] postgresql-migrate-start[2082]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 204.117586] postgresql-migrate-start[2082]: Checking database connection settings ok vm-test-run-wal2json> server # [ 204.176052] postgresql-migrate-start[2082]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 204.187772] postgresql-migrate-start[2082]: Checking for contrib/isn with bigint-passing mismatch ok vm-test-run-wal2json> server # [ 204.823403] postgresql-migrate-start[2082]: Checking data type usage ok vm-test-run-wal2json> server # [ 204.997186] postgresql-migrate-start[2082]: Checking for not-null constraint inconsistencies ok vm-test-run-wal2json> server # [ 205.593327] postgresql-migrate-start[2082]: Creating dump of global objects ok vm-test-run-wal2json> server # [ 207.503380] postgresql-migrate-start[2082]: Creating dump of database schemas ok vm-test-run-wal2json> server # [ 209.573447] postgresql-migrate-start[2082]: Checking for presence of required libraries ok vm-test-run-wal2json> server # [ 209.633393] postgresql-migrate-start[2082]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 209.689534] postgresql-migrate-start[2082]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 209.692488] postgresql-migrate-start[2082]: Checking for new cluster tablespace directories ok vm-test-run-wal2json> server # [ 209.695673] postgresql-migrate-start[2082]: If pg_upgrade fails after this point, you must re-initdb the vm-test-run-wal2json> server # [ 209.702661] postgresql-migrate-start[2082]: new cluster before continuing. vm-test-run-wal2json> server # [ 209.706570] postgresql-migrate-start[2082]: Performing Upgrade vm-test-run-wal2json> server # [ 209.710419] postgresql-migrate-start[2082]: ------------------ vm-test-run-wal2json> server # [ 209.741460] postgresql-migrate-start[2082]: Setting locale and encoding for new cluster ok vm-test-run-wal2json> server # [ 211.909229] postgresql-migrate-start[2082]: Analyzing all rows in the new cluster ok vm-test-run-wal2json> server # [ 212.994811] postgresql-migrate-start[2082]: Freezing all rows in the new cluster ok vm-test-run-wal2json> server # [ 213.390840] postgresql-migrate-start[2082]: Deleting files from new pg_xact ok vm-test-run-wal2json> server # [ 213.547277] postgresql-migrate-start[2082]: Copying old pg_xact to new server ok vm-test-run-wal2json> server # [ 213.874573] postgresql-migrate-start[2082]: Setting oldest XID for new cluster ok vm-test-run-wal2json> server # [ 214.837336] postgresql-migrate-start[2082]: Setting next transaction ID and epoch for new cluster ok vm-test-run-wal2json> server # [ 214.839646] postgresql-migrate-start[2082]: Deleting files from new pg_multixact/offsets ok vm-test-run-wal2json> server # [ 214.973978] postgresql-migrate-start[2082]: Copying old pg_multixact/offsets to new server ok vm-test-run-wal2json> server # [ 214.978630] postgresql-migrate-start[2082]: Deleting files from new pg_multixact/members ok vm-test-run-wal2json> server # [ 215.116854] postgresql-migrate-start[2082]: Copying old pg_multixact/members to new server ok vm-test-run-wal2json> server # [ 215.450448] postgresql-migrate-start[2082]: Setting next multixact ID and offset for new cluster ok vm-test-run-wal2json> server # [ 215.769894] postgresql-migrate-start[2082]: Resetting WAL archives ok vm-test-run-wal2json> server # [ 217.370225] postgresql-migrate-start[2082]: Setting frozenxid and minmxid counters in new cluster ok vm-test-run-wal2json> server # [ 217.735253] postgresql-migrate-start[2082]: Restoring global objects in the new cluster ok vm-test-run-wal2json> server # [ 219.680946] postgresql-migrate-start[2082]: Restoring database schemas in the new cluster ok vm-test-run-wal2json> server # [ 220.343027] postgresql-migrate-start[2082]: Copying user relation files ok vm-test-run-wal2json> server # [ 220.667431] postgresql-migrate-start[2082]: Setting next OID for new cluster ok vm-test-run-wal2json> server # [ 222.283465] postgresql-migrate-start[2082]: Sync data directory to disk ok vm-test-run-wal2json> server # [ 222.287341] postgresql-migrate-start[2082]: Creating script to delete old cluster ok vm-test-run-wal2json> server # [ 224.404095] postgresql-migrate-start[2082]: Checking for extension updates ok vm-test-run-wal2json> server # [ 224.680564] postgresql-migrate-start[2082]: Upgrade Complete vm-test-run-wal2json> server # [ 224.682650] postgresql-migrate-start[2082]: ---------------- vm-test-run-wal2json> server # [ 224.683910] postgresql-migrate-start[2082]: Optimizer statistics are not transferred by pg_upgrade. vm-test-run-wal2json> server # [ 224.685995] postgresql-migrate-start[2082]: Once you start the new server, consider running: vm-test-run-wal2json> server # [ 224.686916] postgresql-migrate-start[2082]: /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/bin/vacuumdb --all --analyze-in-stages vm-test-run-wal2json> server # [ 224.687437] postgresql-migrate-start[2082]: Running this script will delete the old cluster's data files: vm-test-run-wal2json> server # [ 224.689219] postgresql-migrate-start[2082]: ./delete_old_cluster.sh vm-test-run-wal2json> server # [ 224.730502] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 224.781170] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 226.205823] postgres[2242]: [2242] LOG: starting PostgreSQL 17.12 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 226.209984] postgres[2242]: [2242] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 226.211226] postgres[2242]: [2242] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 226.220480] postgres[2242]: [2242] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 226.294468] postgres[2248]: [2248] LOG: database system was shut down at 2026-11-16 07:37:29 GMT vm-test-run-wal2json> server # [ 226.372953] postgres[2242]: [2242] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 226.413162] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 226.430723] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 227.306802] postgresql-setup-start[2258]: ALTER ROLE vm-test-run-wal2json> server # [ 227.355212] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 227.366708] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # the following new units were started: postgresql-migrate.service, sys-devices-platform-4010000000.pcie-pci0000:00-0000:00:0b.0-virtio9-virtio\x2dports-vport9p0.device, sys-devices-virtual-input-mice.device, sys-devices-virtual-misc-rfkill.device, sys-devices-virtual-misc-tun.device, sys-devices-virtual-mtd-mtd0ro.device, sysinit-reactivation.target, systemd-rfkill.socket, systemd-tmpfiles-resetup.service, systemd-vconsole-setup.service vm-test-run-wal2json> server # [ 227.667941] nixos[1688]: finished switching to system configuration /nix/store/5wysm0jkv6jhg8698fqlw9nj21cr58pc-nixos-system-server-test vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 0.85 seconds) vm-test-run-wal2json> server: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no' vm-test-run-wal2json> server: (finished: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no', in 0.18 seconds) vm-test-run-wal2json> (finished: subtest: switch to postgresql 17, in 83.02 seconds) vm-test-run-wal2json> subtest: Check last version of the extension after postgresql upgrade vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.39 seconds) vm-test-run-wal2json> (finished: subtest: Check last version of the extension after postgresql upgrade, in 0.39 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.37 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.44 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.37 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 17, in 1.17 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 230.699555] sudo[2284]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 230.843580] sudo[2284]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 231.376904] postgres[2291]: [2291] LOG: logical decoding found consistent point at 0/8034EC8 vm-test-run-wal2json> server # [ 231.378881] postgres[2291]: [2291] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 231.379714] postgres[2291]: [2291] STATEMENT: select vm-test-run-wal2json> server # [ 231.380238] postgres[2291]: 1 vm-test-run-wal2json> server # [ 231.381076] postgres[2291]: from vm-test-run-wal2json> server # [ 231.381945] postgres[2291]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 231.424045] postgres[2291]: [2291] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 231.426063] postgres[2291]: [2291] DETAIL: Streaming transactions committing after 0/8034F00, reading WAL from 0/8034EC8. vm-test-run-wal2json> server # [ 231.427326] postgres[2291]: [2291] STATEMENT: select vm-test-run-wal2json> server # [ 231.427846] postgres[2291]: data vm-test-run-wal2json> server # [ 231.428260] postgres[2291]: from vm-test-run-wal2json> server # [ 231.429672] postgres[2291]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 231.430971] postgres[2291]: 'reg_test', vm-test-run-wal2json> server # [ 231.431937] postgres[2291]: null, vm-test-run-wal2json> server # [ 231.433070] postgres[2291]: null, vm-test-run-wal2json> server # [ 231.434630] postgres[2291]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 231.435499] postgres[2291]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 231.436898] postgres[2291]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 231.438170] postgres[2291]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 231.439258] postgres[2291]: 'format-version', '2', vm-test-run-wal2json> server # [ 231.439704] postgres[2291]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 231.439998] postgres[2291]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 231.441044] postgres[2291]: ) x; vm-test-run-wal2json> server # [ 231.442216] postgres[2291]: [2291] LOG: logical decoding found consistent point at 0/8034EC8 vm-test-run-wal2json> server # [ 231.442745] postgres[2291]: [2291] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 231.443260] postgres[2291]: [2291] STATEMENT: select vm-test-run-wal2json> server # [ 231.443595] postgres[2291]: data vm-test-run-wal2json> server # [ 231.443836] postgres[2291]: from vm-test-run-wal2json> server # [ 231.444079] postgres[2291]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 231.444324] postgres[2291]: 'reg_test', vm-test-run-wal2json> server # [ 231.444753] postgres[2291]: null, vm-test-run-wal2json> server # [ 231.446111] postgres[2291]: null, vm-test-run-wal2json> server # [ 231.446435] postgres[2291]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 231.446686] postgres[2291]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 231.447273] postgres[2291]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 231.447595] postgres[2291]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 231.448241] postgres[2291]: 'format-version', '2', vm-test-run-wal2json> server # [ 231.448605] postgres[2291]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 231.449977] postgres[2291]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 231.450778] postgres[2291]: ) x; vm-test-run-wal2json> server # [ 231.698524] sudo[2284]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.43 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 556 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after extension upgrade, in 1.43 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.37 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.41 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.39 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.17 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 233.279592] sudo[2306]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 233.416914] sudo[2306]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 233.854461] postgres[2313]: [2313] LOG: logical decoding found consistent point at 0/803B4F0 vm-test-run-wal2json> server # [ 233.857509] postgres[2313]: [2313] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 233.858741] postgres[2313]: [2313] STATEMENT: select vm-test-run-wal2json> server # [ 233.861131] postgres[2313]: 1 vm-test-run-wal2json> server # [ 233.862270] postgres[2313]: from vm-test-run-wal2json> server # [ 233.862726] postgres[2313]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 233.891997] postgres[2313]: [2313] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 233.893842] postgres[2313]: [2313] DETAIL: Streaming transactions committing after 0/803B528, reading WAL from 0/803B4F0. vm-test-run-wal2json> server # [ 233.895116] postgres[2313]: [2313] STATEMENT: select vm-test-run-wal2json> server # [ 233.895723] postgres[2313]: data vm-test-run-wal2json> server # [ 233.895990] postgres[2313]: from vm-test-run-wal2json> server # [ 233.896236] postgres[2313]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 233.897629] postgres[2313]: 'reg_test', vm-test-run-wal2json> server # [ 233.898319] postgres[2313]: null, vm-test-run-wal2json> server # [ 233.898610] postgres[2313]: null, vm-test-run-wal2json> server # [ 233.898873] postgres[2313]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 233.899207] postgres[2313]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 233.899542] postgres[2313]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 233.899799] postgres[2313]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 233.900044] postgres[2313]: 'format-version', '2', vm-test-run-wal2json> server # [ 233.900473] postgres[2313]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 233.901480] postgres[2313]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 233.901786] postgres[2313]: ) x; vm-test-run-wal2json> server # [ 233.902226] postgres[2313]: [2313] LOG: logical decoding found consistent point at 0/803B4F0 vm-test-run-wal2json> server # [ 233.902556] postgres[2313]: [2313] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 233.902824] postgres[2313]: [2313] STATEMENT: select vm-test-run-wal2json> server # [ 233.903610] postgres[2313]: data vm-test-run-wal2json> server # [ 233.903906] postgres[2313]: from vm-test-run-wal2json> server # [ 233.904146] postgres[2313]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 233.906223] postgres[2313]: 'reg_test', vm-test-run-wal2json> server # [ 233.906622] postgres[2313]: null, vm-test-run-wal2json> server # [ 233.906860] postgres[2313]: null, vm-test-run-wal2json> server # [ 233.907096] postgres[2313]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 233.907489] postgres[2313]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 233.907761] postgres[2313]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 233.908026] postgres[2313]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 233.910957] postgres[2313]: 'format-version', '2', vm-test-run-wal2json> server # [ 233.913137] postgres[2313]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 233.913851] postgres[2313]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 233.914331] postgres[2313]: ) x; vm-test-run-wal2json> server # [ 234.170087] sudo[2306]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.30 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 464 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after installing the last version, in 1.30 seconds) vm-test-run-wal2json> subtest: switch to orioledb 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 240.687686] nixos[2320]: switching to system configuration /nix/store/dl6wyy7czm28nb9xs2ihjkf61lrf9vgq-nixos-system-server-test vm-test-run-wal2json> server # [ 240.708720] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 240.722868] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 240.729799] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 240.731887] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 240.741392] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 240.750785] postgres[2242]: [2242] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 240.759210] postgres[2242]: [2242] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 240.802633] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 240.858321] postgres[2242]: [2242] LOG: background worker "logical replication launcher" (PID 2251) exited with exit code 1 vm-test-run-wal2json> server # [ 240.871699] postgres[2246]: [2246] LOG: shutting down vm-test-run-wal2json> server # [ 240.879852] postgres[2246]: [2246] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 241.036182] postgres[2246]: [2246] LOG: checkpoint complete: wrote 57 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.047 s, sync=0.058 s, total=0.172 s; sync files=45, longest=0.013 s, average=0.002 s; distance=241 kB, estimate=241 kB; lsn=0/803C5C8, redo lsn=0/803C5C8 vm-test-run-wal2json> server # [ 241.080108] postgres[2242]: [2242] LOG: database system is shut down vm-test-run-wal2json> server # [ 241.136964] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 241.144649] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 241.151294] systemd[1]: postgresql.service: Consumed 2.301s CPU time, 22.3M memory peak, 264K written to disk. vm-test-run-wal2json> server # [ 241.190231] systemd[1]: postgresql-migrate.service: Deactivated successfully. vm-test-run-wal2json> server # [ 241.195049] systemd[1]: Stopped postgresql-migrate.service. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # [ 241.204764] systemd[1]: postgresql-migrate.service: Consumed 32.969s CPU time, 94.2M memory peak, 173M written to disk. vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 245.754345] systemd[1]: Reload requested from client PID 2320 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 245.758089] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 252.521570] systemd[1]: Reloading finished in 6749 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 252.859190] systemd[1]: Stopped target Reactivate sysinit units. vm-test-run-wal2json> server # [ 252.867337] systemd[1]: Stopping Reactivate sysinit units... vm-test-run-wal2json> server # [ 252.870551] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 252.913351] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 253.225807] dbus-daemon[636]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 253.433262] dbus-daemon[636]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 253.454207] dbus-send[2396]: method return time=1794814678.819779 sender=org.freedesktop.DBus -> destination=:1.7 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 253.516078] dbus-daemon[636]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 253.722577] dbus-daemon[636]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 253.746704] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 253.833441] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 253.869396] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 253.931320] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 253.942937] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 254.127020] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 254.134184] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 254.206708] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 254.330309] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 254.340798] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 254.495990] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 254.557781] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 254.559568] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 254.564819] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 254.567528] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 254.578334] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 254.580065] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 255.156057] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 258.842074] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 258.850367] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 258.861173] systemd[1]: suid-sgid-wrappers.service: Consumed 2.030s CPU time, 3.4M memory peak. vm-test-run-wal2json> server # [ 258.920065] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 260.379059] postgresql-pre-start[2479]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 260.383996] postgresql-pre-start[2479]: This user must also own the server process. vm-test-run-wal2json> server # [ 260.454432] postgresql-pre-start[2479]: Using language tag "en-US" for ICU locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 260.456253] postgresql-pre-start[2479]: The database cluster will be initialized with this locale configuration: vm-test-run-wal2json> server # [ 260.457466] postgresql-pre-start[2479]: locale provider: icu vm-test-run-wal2json> server # [ 260.458113] postgresql-pre-start[2479]: default collation: en-US vm-test-run-wal2json> server # [ 260.458516] postgresql-pre-start[2479]: LC_COLLATE: en_US.UTF-8 vm-test-run-wal2json> server # [ 260.459093] postgresql-pre-start[2479]: LC_CTYPE: en_US.UTF-8 vm-test-run-wal2json> server # [ 260.459597] postgresql-pre-start[2479]: LC_MESSAGES: en_US.UTF-8 vm-test-run-wal2json> server # [ 260.462646] postgresql-pre-start[2479]: LC_MONETARY: en_US.UTF-8 vm-test-run-wal2json> server # [ 260.464023] postgresql-pre-start[2479]: LC_NUMERIC: en_US.UTF-8 vm-test-run-wal2json> server # [ 260.465363] postgresql-pre-start[2479]: LC_TIME: en_US.UTF-8 vm-test-run-wal2json> server # [ 260.465791] postgresql-pre-start[2479]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 260.466209] postgresql-pre-start[2479]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 260.466842] postgresql-pre-start[2479]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 260.467634] postgresql-pre-start[2479]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 260.470069] postgresql-pre-start[2479]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 261.164945] postgresql-pre-start[2479]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 261.704879] postgresql-pre-start[2479]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 271.139690] postgresql-pre-start[2479]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 271.167457] postgresql-pre-start[2479]: creating configuration files ... ok vm-test-run-wal2json> server # [ 273.483267] postgresql-pre-start[2479]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 279.201429] postgresql-pre-start[2479]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 280.707003] postgresql-pre-start[2479]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 280.708135] postgresql-pre-start[2479]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 280.709639] postgresql-pre-start[2479]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 280.712593] postgresql-pre-start[2479]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 280.714449] postgresql-pre-start[2479]: /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 281.892606] postgres[2492]: [2492] LOG: registered custom resource manager "OrioleDB resource manager" with ID 129 vm-test-run-wal2json> server # [ 282.234898] postgres[2492]: [2492] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 282.306538] postgres[2492]: [2492] LOG: listening on IPv6 address "::1", port 5432 vm-test-run-wal2json> server # [ 282.308756] postgres[2492]: [2492] LOG: listening on IPv4 address "127.0.0.1", port 5432 vm-test-run-wal2json> server # [ 282.321803] postgres[2492]: [2492] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 282.398941] postgres[2498]: [2498] LOG: Cleanup of old files at startup. Checkpoint 0 vm-test-run-wal2json> server # [ 282.409279] postgres[2498]: [2498] LOG: database system was shut down at 2026-11-16 07:38:24 GMT vm-test-run-wal2json> server # [ 282.430840] postgres[2499]: [2499] LOG: orioledb background writer 0 started vm-test-run-wal2json> server # [ 282.517270] postgres[2492]: [2492] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 282.554526] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 282.591246] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 283.820183] postgresql-setup-start[2506]: CREATE EXTENSION vm-test-run-wal2json> server # [ 284.328180] postgresql-setup-start[2512]: CREATE ROLE vm-test-run-wal2json> server # [ 284.529233] postgresql-setup-start[2514]: ALTER ROLE vm-test-run-wal2json> server # [ 284.601106] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 284.614100] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 284.913717] nixos[2320]: finished switching to system configuration /nix/store/dl6wyy7czm28nb9xs2ihjkf61lrf9vgq-nixos-system-server-test vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" , in 0.40 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.37 seconds) vm-test-run-wal2json> (finished: subtest: switch to orioledb 17, in 51.52 seconds) vm-test-run-wal2json> subtest: Check upgrade path with orioledb 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.37 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.46 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.38 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with orioledb 17, in 1.21 seconds) vm-test-run-wal2json> subtest: Check pg_regress with orioledb 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" vm-test-run-wal2json> server # [ 287.350346] sudo[2537]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 wal2json vm-test-run-wal2json> server # [ 287.496190] sudo[2537]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 288.154019] postgres[2544]: [2544] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 288.155688] postgres[2544]: [2544] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 288.156259] postgres[2544]: [2544] STATEMENT: select vm-test-run-wal2json> server # [ 288.158565] postgres[2544]: 1 vm-test-run-wal2json> server # [ 288.159030] postgres[2544]: from vm-test-run-wal2json> server # [ 288.160122] postgres[2544]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 288.211051] postgres[2544]: [2544] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 288.214179] postgres[2544]: [2544] DETAIL: Streaming transactions committing after 0/15908A0, reading WAL from 0/1590850. vm-test-run-wal2json> server # [ 288.215707] postgres[2544]: [2544] STATEMENT: select vm-test-run-wal2json> server # [ 288.217383] postgres[2544]: data vm-test-run-wal2json> server # [ 288.219166] postgres[2544]: from vm-test-run-wal2json> server # [ 288.219587] postgres[2544]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 288.219852] postgres[2544]: 'reg_test', vm-test-run-wal2json> server # [ 288.220085] postgres[2544]: null, vm-test-run-wal2json> server # [ 288.221190] postgres[2544]: null, vm-test-run-wal2json> server # [ 288.222024] postgres[2544]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 288.222753] postgres[2544]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 288.223459] postgres[2544]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 288.223945] postgres[2544]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 288.224861] postgres[2544]: 'format-version', '2', vm-test-run-wal2json> server # [ 288.226613] postgres[2544]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 288.227251] postgres[2544]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 288.227567] postgres[2544]: ) x; vm-test-run-wal2json> server # [ 288.227995] postgres[2544]: [2544] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 288.228300] postgres[2544]: [2544] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 288.228549] postgres[2544]: [2544] STATEMENT: select vm-test-run-wal2json> server # [ 288.230539] postgres[2544]: data vm-test-run-wal2json> server # [ 288.231000] postgres[2544]: from vm-test-run-wal2json> server # [ 288.231713] postgres[2544]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 288.233807] postgres[2544]: 'reg_test', vm-test-run-wal2json> server # [ 288.234835] postgres[2544]: null, vm-test-run-wal2json> server # [ 288.235906] postgres[2544]: null, vm-test-run-wal2json> server # [ 288.238769] postgres[2544]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 288.239271] postgres[2544]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 288.239643] postgres[2544]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 288.240097] postgres[2544]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 288.241607] postgres[2544]: 'format-version', '2', vm-test-run-wal2json> server # [ 288.242822] postgres[2544]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 288.243876] postgres[2544]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 288.245835] postgres[2544]: ) x; vm-test-run-wal2json> server # [ 288.529059] sudo[2537]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/b1z4a03plj5kp3wspv3qfs672hz98gl0-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" , in 1.64 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 704 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with orioledb 17 after installing the last version, in 1.64 seconds) vm-test-run-wal2json> (finished: run the VM test script, in 289.72 seconds) vm-test-run-wal2json> test script finished in 290.10s vm-test-run-wal2json> cleanup vm-test-run-wal2json> kill machine (pid 9) vm-test-run-wal2json> qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/a1mjjnpfivsx5gi4rxbcr54vl6gyjfzj-python3-3.13.11/bin/python3.13) vm-test-run-wal2json> vde_switch: EOF data port: Interrupted system call vm-test-run-wal2json> kill vlan (pid 7) vm-test-run-wal2json> vde_switch: Caught signal 15, cleaning up and exiting vm-test-run-wal2json> (finished: cleanup, in 0.01 seconds)