these 2 derivations will be built: /nix/store/dzp0gqd5njzacp1kgkh49zkxydyjpv52-nixos-test-driver-wal2json.drv /nix/store/92g1l485flhvk1hckdjwy1sq1j495bpy-vm-test-run-wal2json.drv building '/nix/store/dzp0gqd5njzacp1kgkh49zkxydyjpv52-nixos-test-driver-wal2json.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/dzp0gqd5njzacp1kgkh49zkxydyjpv52-nixos-test-driver-wal2json.drv' nixos-test-driver-wal2json> Running type check (enable/disable: config.skipTypeCheck) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck nixos-test-driver-wal2json> Success: no issues found in 1 source file nixos-test-driver-wal2json> additionally exposed symbols: nixos-test-driver-wal2json> , nixos-test-driver-wal2json> , nixos-test-driver-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug nixos-test-driver-wal2json> Linting test script (enable/disable: config.skipLint) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint building '/nix/store/92g1l485flhvk1hckdjwy1sq1j495bpy-vm-test-run-wal2json.drv' on 'ssh-ng://builder@mac-linux-builder' building '/nix/store/92g1l485flhvk1hckdjwy1sq1j495bpy-vm-test-run-wal2json.drv' vm-test-run-wal2json> Machine state will be reset. To keep it, pass --keep-vm-state vm-test-run-wal2json> start all VLans vm-test-run-wal2json> start vlan vm-test-run-wal2json> running vlan (pid 7; ctl /build/vde1.ctl) vm-test-run-wal2json> (finished: start all VLans, in 0.00 seconds) vm-test-run-wal2json> Test will time out and terminate in 3600 seconds vm-test-run-wal2json> run the VM test script vm-test-run-wal2json> additionally exposed symbols: vm-test-run-wal2json> server, vm-test-run-wal2json> vlan1, vm-test-run-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug vm-test-run-wal2json> Running tests for extension: wal2json vm-test-run-wal2json> start all VMs vm-test-run-wal2json> server: starting vm vm-test-run-wal2json> mke2fs 1.47.3 (8-Jul-2025) vm-test-run-wal2json> qemu-system-aarch64: Could not access KVM kernel module: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: failed to initialize kvm: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: falling back to tcg vm-test-run-wal2json> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-wal2json> server: QEMU running (pid 9) vm-test-run-wal2json> server # Formatting '/build/vm-state-server/tmp.QgWhIXoXjc', fmt=raw size=1073741824 vm-test-run-wal2json> server # Discarding device blocks: 0/262144 done vm-test-run-wal2json> server # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-wal2json> server # Filesystem UUID: 3e1a72f3-1233-4f23-b80a-e2f2cdfac58f vm-test-run-wal2json> server # Superblock backups stored on blocks: vm-test-run-wal2json> server # 32768, 98304, 163840, 229376 vm-test-run-wal2json> server # vm-test-run-wal2json> server # Allocating group tables: 0/8 done vm-test-run-wal2json> server # Writing inode tables: 0/8 done vm-test-run-wal2json> server # Creating journal (8192 blocks): done vm-test-run-wal2json> server # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-wal2json> server # vm-test-run-wal2json> server # Virtualisation disk image created. vm-test-run-wal2json> (finished: start all VMs, in 0.14 seconds) vm-test-run-wal2json> server: waiting for unit multi-user.target vm-test-run-wal2json> server: waiting for the VM to finish booting vm-test-run-wal2json> server # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510] vm-test-run-wal2json> server # [ 0.000000] Linux version 6.12.63 (runner@ie-supabase-native-arm-5hdpw-2qtrh) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP Thu Dec 18 12:55:23 UTC 2025 vm-test-run-wal2json> server # [ 0.000000] KASLR enabled vm-test-run-wal2json> server # [ 0.000000] random: crng init done vm-test-run-wal2json> server # [ 0.000000] Machine model: linux,dummy-virt vm-test-run-wal2json> server # [ 0.000000] efi: UEFI not found. vm-test-run-wal2json> server # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT vm-test-run-wal2json> server # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] NODE_DATA(0) allocated [mem 0x13f602200-0x13f60593f] vm-test-run-wal2json> server # [ 0.000000] Zone ranges: vm-test-run-wal2json> server # [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] vm-test-run-wal2json> server # [ 0.000000] DMA32 empty vm-test-run-wal2json> server # [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Device empty vm-test-run-wal2json> server # [ 0.000000] Movable zone start for each node vm-test-run-wal2json> server # [ 0.000000] Early memory node ranges vm-test-run-wal2json> server # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 vm-test-run-wal2json> server # [ 0.000000] psci: probing for conduit method from DT. vm-test-run-wal2json> server # [ 0.000000] psci: PSCIv1.1 detected in firmware. vm-test-run-wal2json> server # [ 0.000000] psci: Using standard PSCI v0.2 function IDs vm-test-run-wal2json> server # [ 0.000000] psci: Trusted OS migration not required vm-test-run-wal2json> server # [ 0.000000] psci: SMC Calling Convention v1.0 vm-test-run-wal2json> server # [ 0.000000] percpu: Embedded 88 pages/cpu s180056 r65536 d114856 u360448 vm-test-run-wal2json> server # [ 0.000000] Detected PIPT I-cache on CPU0 vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: GIC system register CPU interface vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: HCRX_EL2 register vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: 52-bit Virtual Addressing (LPA2) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Spectre-v4 vm-test-run-wal2json> server # [ 0.000000] alternatives: applying boot alternatives vm-test-run-wal2json> server # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/jw3gakad9xzrps7zrfw0b9rj0945fvbn-nixos-system-server-test/init regInfo=/nix/store/jmr84yi7w950mkfb47d29qmiwrjyniaf-closure-info/registration console=ttyAMA0,115200n8 console=tty0 vm-test-run-wal2json> server # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/jmr84yi7w950mkfb47d29qmiwrjyniaf-closure-info/registration", will be passed to user space. vm-test-run-wal2json> server # [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Fallback order for Node 0: 0 vm-test-run-wal2json> server # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 vm-test-run-wal2json> server # [ 0.000000] Policy zone: Normal vm-test-run-wal2json> server # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-wal2json> server # [ 0.000000] software IO TLB: area num 2. vm-test-run-wal2json> server # [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) vm-test-run-wal2json> server # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-wal2json> server # [ 0.000000] allocated 8388608 bytes of page_ext vm-test-run-wal2json> server # [ 0.000000] ftrace: allocating 72257 entries in 283 pages vm-test-run-wal2json> server # [ 0.000000] ftrace: allocated 283 pages with 5 groups vm-test-run-wal2json> server # [ 0.000000] rcu: Hierarchical RCU implementation. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU event tracing is enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] Rude variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] Tracing variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. vm-test-run-wal2json> server # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 vm-test-run-wal2json> server # [ 0.000000] GICv3: 256 SPIs implemented vm-test-run-wal2json> server # [ 0.000000] GICv3: 0 Extended SPIs implemented vm-test-run-wal2json> server # [ 0.000000] Root IRQ handler: gic_handle_irq vm-test-run-wal2json> server # [ 0.000000] GICv3: GICv3 features: 16 PPIs vm-test-run-wal2json> server # [ 0.000000] GICv3: GICD_CTRL.DS=1, SCR_EL3.FIQ=0 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 vm-test-run-wal2json> server # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @100ad0000 (indirect, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @100ae0000 (flat, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] GICv3: using LPI property table @0x0000000100af0000 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100b00000 vm-test-run-wal2json> server # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-wal2json> server # [ 0.000000] arch_timer: cp15 timer(s) running at 1000.00MHz (virt). vm-test-run-wal2json> server # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-wal2json> server # [ 0.000037] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns vm-test-run-wal2json> server # [ 0.003516] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-wal2json> server # [ 0.013379] Console: colour dummy device 80x25 vm-test-run-wal2json> server # [ 0.015147] printk: legacy console [tty0] enabled vm-test-run-wal2json> server # [ 0.020842] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) vm-test-run-wal2json> server # [ 0.021259] pid_max: default: 32768 minimum: 301 vm-test-run-wal2json> server # [ 0.023265] LSM: initializing lsm=capability,landlock,yama,bpf vm-test-run-wal2json> server # [ 0.025315] landlock: Up and running. vm-test-run-wal2json> server # [ 0.025372] Yama: becoming mindful. vm-test-run-wal2json> server # [ 0.028497] LSM support for eBPF active vm-test-run-wal2json> server # [ 0.032107] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.032291] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.062176] cacheinfo: Unable to detect cache hierarchy for CPU 0 vm-test-run-wal2json> server # [ 0.074540] rcu: Hierarchical SRCU implementation. vm-test-run-wal2json> server # [ 0.074644] rcu: Max phase no-delay instances is 1000. vm-test-run-wal2json> server # [ 0.076105] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-wal2json> server # [ 0.082839] fsl-mc MSI: its@8080000 domain created vm-test-run-wal2json> server # [ 0.085311] EFI services will not be available. vm-test-run-wal2json> server # [ 0.087255] smp: Bringing up secondary CPUs ... vm-test-run-wal2json> server # [ 0.092121] Detected PIPT I-cache on CPU1 vm-test-run-wal2json> server # [ 0.093533] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000 vm-test-run-wal2json> server # [ 0.094257] GICv3: CPU1: using allocated LPI pending table @0x0000000100b10000 vm-test-run-wal2json> server # [ 0.095763] CPU1: Booted secondary processor 0x0000000001 [0x000f0510] vm-test-run-wal2json> server # [ 0.099484] smp: Brought up 1 node, 2 CPUs vm-test-run-wal2json> server # [ 0.099646] SMP: Total of 2 processors activated. vm-test-run-wal2json> server # [ 0.099690] CPU: All CPU(s) started at EL1 vm-test-run-wal2json> server # [ 0.099860] CPU features: detected: Branch Target Identification vm-test-run-wal2json> server # [ 0.099916] CPU features: detected: 32-bit EL0 Support vm-test-run-wal2json> server # [ 0.099947] CPU features: detected: 32-bit EL1 Support vm-test-run-wal2json> server # [ 0.099973] CPU features: detected: ARMv8.4 Translation Table Level vm-test-run-wal2json> server # [ 0.100003] CPU features: detected: Instruction cache invalidation not required for I/D coherence vm-test-run-wal2json> server # [ 0.100038] CPU features: detected: Data cache clean to the PoU not required for I/D coherence vm-test-run-wal2json> server # [ 0.100102] CPU features: detected: Common not Private translations vm-test-run-wal2json> server # [ 0.100130] CPU features: detected: CRC32 instructions vm-test-run-wal2json> server # [ 0.100152] CPU features: detected: Data cache clean to Point of Deep Persistence vm-test-run-wal2json> server # [ 0.100178] CPU features: detected: Data cache clean to Point of Persistence vm-test-run-wal2json> server # [ 0.100207] CPU features: detected: Data independent timing control (DIT) vm-test-run-wal2json> server # [ 0.100234] CPU features: detected: E0PD vm-test-run-wal2json> server # [ 0.100257] CPU features: detected: Enhanced Counter Virtualization vm-test-run-wal2json> server # [ 0.100284] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) vm-test-run-wal2json> server # [ 0.100313] CPU features: detected: Enhanced Privileged Access Never vm-test-run-wal2json> server # [ 0.100337] CPU features: detected: Enhanced Virtualization Traps vm-test-run-wal2json> server # [ 0.100359] CPU features: detected: Fine Grained Traps vm-test-run-wal2json> server # [ 0.100420] CPU features: detected: Generic authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.100507] CPU features: detected: RCpc load-acquire (LDAPR) vm-test-run-wal2json> server # [ 0.100556] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2) vm-test-run-wal2json> server # [ 0.100580] CPU features: detected: LSE atomic instructions vm-test-run-wal2json> server # [ 0.100601] CPU features: detected: Memory Copy and Memory Set instructions vm-test-run-wal2json> server # [ 0.100628] CPU features: detected: Privileged Access Never vm-test-run-wal2json> server # [ 0.100650] CPU features: detected: RAS Extension Support vm-test-run-wal2json> server # [ 0.100670] CPU features: detected: Random Number Generator vm-test-run-wal2json> server # [ 0.100690] CPU features: detected: Speculation barrier (SB) vm-test-run-wal2json> server # [ 0.100711] CPU features: detected: Stage-2 Force Write-Back vm-test-run-wal2json> server # [ 0.100736] CPU features: detected: Trap EL0 IMPLEMENTATION DEFINED functionality vm-test-run-wal2json> server # [ 0.100763] CPU features: detected: TLB range maintenance instructions vm-test-run-wal2json> server # [ 0.100785] CPU features: detected: WFx with timeout vm-test-run-wal2json> server # [ 0.100822] CPU features: detected: Speculative Store Bypassing Safe (SSBS) vm-test-run-wal2json> server # [ 0.100846] CPU features: detected: Scalable Vector Extension vm-test-run-wal2json> server # [ 0.108693] alternatives: applying system-wide alternatives vm-test-run-wal2json> server # [ 0.125822] CPU features: detected: Hardware dirty bit management on CPU0-1 vm-test-run-wal2json> server # [ 0.126386] SVE: maximum available vector length 256 bytes per vector vm-test-run-wal2json> server # [ 0.126465] SVE: default vector length 64 bytes per vector vm-test-run-wal2json> server # [ 0.139135] Memory: 3922904K/4194304K available (23296K kernel code, 6546K rwdata, 24596K rodata, 4416K init, 1047K bss, 223164K reserved, 32768K cma-reserved) vm-test-run-wal2json> server # [ 0.162631] devtmpfs: initialized vm-test-run-wal2json> server # [ 0.190793] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns vm-test-run-wal2json> server # [ 0.191953] futex hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.194474] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL vm-test-run-wal2json> server # [ 0.194552] 0 pages in range for non-PLT usage vm-test-run-wal2json> server # [ 0.194590] 509248 pages in range for PLT usage vm-test-run-wal2json> server # [ 0.197250] pinctrl core: initialized pinctrl subsystem vm-test-run-wal2json> server # [ 0.209124] DMI not present or invalid. vm-test-run-wal2json> server # [ 0.228737] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-wal2json> server # [ 0.241186] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations vm-test-run-wal2json> server # [ 0.242478] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-wal2json> server # [ 0.243638] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-wal2json> server # [ 0.243902] audit: initializing netlink subsys (disabled) vm-test-run-wal2json> server # [ 0.246509] audit: type=2000 audit(0.200:1): state=initialized audit_enabled=0 res=1 vm-test-run-wal2json> server # [ 0.252508] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-wal2json> server # [ 0.252565] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-wal2json> server # [ 0.252622] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-wal2json> server # [ 0.252653] thermal_sys: Registered thermal governor 'user_space' vm-test-run-wal2json> server # [ 0.252681] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-wal2json> server # [ 0.253636] cpuidle: using governor ladder vm-test-run-wal2json> server # [ 0.254405] cpuidle: using governor menu vm-test-run-wal2json> server # [ 0.256371] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. vm-test-run-wal2json> server # [ 0.257021] ASID allocator initialised with 65536 entries vm-test-run-wal2json> server # [ 0.264970] Serial: AMBA PL011 UART driver vm-test-run-wal2json> server # [ 0.313562] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 vm-test-run-wal2json> server # [ 0.315361] printk: legacy console [ttyAMA0] enabled vm-test-run-wal2json> server # [ 0.351532] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.351734] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-wal2json> server # [ 0.351967] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.352307] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page vm-test-run-wal2json> server # [ 0.352412] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.352507] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-wal2json> server # [ 0.353432] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.353626] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page vm-test-run-wal2json> server # [ 0.368513] fbcon: Taking over console vm-test-run-wal2json> server # [ 0.369115] ACPI: Interpreter disabled. vm-test-run-wal2json> server # [ 0.376817] iommu: Default domain type: Translated vm-test-run-wal2json> server # [ 0.377168] iommu: DMA domain TLB invalidation policy: strict mode vm-test-run-wal2json> server # [ 0.381477] SCSI subsystem initialized vm-test-run-wal2json> server # [ 0.383725] usbcore: registered new interface driver usbfs vm-test-run-wal2json> server # [ 0.384131] usbcore: registered new interface driver hub vm-test-run-wal2json> server # [ 0.384463] usbcore: registered new device driver usb vm-test-run-wal2json> server # [ 0.387502] pps_core: LinuxPPS API ver. 1 registered vm-test-run-wal2json> server # [ 0.387643] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti vm-test-run-wal2json> server # [ 0.388191] PTP clock support registered vm-test-run-wal2json> server # [ 0.388632] EDAC MC: Ver: 3.0.0 vm-test-run-wal2json> server # [ 0.390432] scmi_core: SCMI protocol bus registered vm-test-run-wal2json> server # [ 0.393429] FPGA manager framework vm-test-run-wal2json> server # [ 0.394652] Advanced Linux Sound Architecture Driver Initialized. vm-test-run-wal2json> server # [ 0.402857] vgaarb: loaded vm-test-run-wal2json> server # [ 0.408326] clocksource: Switched to clocksource arch_sys_counter vm-test-run-wal2json> server # [ 0.412747] VFS: Disk quotas dquot_6.6.0 vm-test-run-wal2json> server # [ 0.413057] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-wal2json> server # [ 0.418354] netfs: FS-Cache loaded vm-test-run-wal2json> server # [ 0.419888] pnp: PnP ACPI: disabled vm-test-run-wal2json> server # [ 0.444795] NET: Registered PF_INET protocol family vm-test-run-wal2json> server # [ 0.446436] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-wal2json> server # [ 0.561077] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.561768] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.562531] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.563786] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) vm-test-run-wal2json> server # [ 0.564902] TCP: Hash tables configured (established 32768 bind 32768) vm-test-run-wal2json> server # [ 0.566700] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear) vm-test-run-wal2json> server # [ 0.567220] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.567879] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.570115] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-wal2json> server # [ 0.570589] NET: Registered PF_XDP protocol family vm-test-run-wal2json> server # [ 0.571137] PCI: CLS 0 bytes, default 64 vm-test-run-wal2json> server # [ 0.573504] kvm [1]: HYP mode not available vm-test-run-wal2json> server # [ 0.575319] Trying to unpack rootfs image as initramfs... vm-test-run-wal2json> server # [ 0.681503] Initialise system trusted keyrings vm-test-run-wal2json> server # [ 0.683656] workingset: timestamp_bits=42 max_order=20 bucket_order=0 vm-test-run-wal2json> server # [ 0.687932] squashfs: version 4.0 (2009/01/31) Phillip Lougher vm-test-run-wal2json> server # [ 0.689492] 9p: Installing v9fs 9p2000 file system support vm-test-run-wal2json> server # [ 0.751659] Key type asymmetric registered vm-test-run-wal2json> server # [ 0.751909] Asymmetric key parser 'x509' registered vm-test-run-wal2json> server # [ 0.752718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) vm-test-run-wal2json> server # [ 0.754090] io scheduler mq-deadline registered vm-test-run-wal2json> server # [ 0.754261] io scheduler kyber registered vm-test-run-wal2json> server # [ 0.781542] pl061_gpio 9030000.pl061: PL061 GPIO chip registered vm-test-run-wal2json> server # [ 0.786799] ledtrig-cpu: registered to indicate activity on CPUs vm-test-run-wal2json> server # [ 0.791441] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: vm-test-run-wal2json> server # [ 0.792105] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 vm-test-run-wal2json> server # [ 0.793545] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 vm-test-run-wal2json> server # [ 0.794144] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 vm-test-run-wal2json> server # [ 0.794792] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits vm-test-run-wal2json> server # [ 0.795394] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] vm-test-run-wal2json> server # [ 0.797694] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 vm-test-run-wal2json> server # [ 0.798119] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-wal2json> server # [ 0.798287] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.798474] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.799021] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.800291] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.804109] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.805098] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.805381] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.805534] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.805688] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.806293] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.806770] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.806881] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.807006] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.807532] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.807717] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.807818] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.807933] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.808759] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.809033] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.809143] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.809350] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.809850] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.810012] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.810115] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.810229] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.810690] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.810841] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] vm-test-run-wal2json> server # [ 0.810932] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.811043] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.811497] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.811658] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.811752] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.811860] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.811973] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.812968] pci 0000:00:08.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.813378] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.813501] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.814031] pci 0000:00:09.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.814207] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.814374] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.815039] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.815290] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.815773] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.815974] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.816383] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.816514] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.817820] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.818032] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.818262] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.818753] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.820665] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned vm-test-run-wal2json> server # [ 0.821044] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned vm-test-run-wal2json> server # [ 0.821390] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.821851] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.822149] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.822295] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.822429] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.822563] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.822715] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.822858] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.823267] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.823960] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.824794] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.825108] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned vm-test-run-wal2json> server # [ 0.825339] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned vm-test-run-wal2json> server # [ 0.825467] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned vm-test-run-wal2json> server # [ 0.825585] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned vm-test-run-wal2json> server # [ 0.825700] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned vm-test-run-wal2json> server # [ 0.825902] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned vm-test-run-wal2json> server # [ 0.826018] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned vm-test-run-wal2json> server # [ 0.826349] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned vm-test-run-wal2json> server # [ 0.826459] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned vm-test-run-wal2json> server # [ 0.826570] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned vm-test-run-wal2json> server # [ 0.826741] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned vm-test-run-wal2json> server # [ 0.826853] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned vm-test-run-wal2json> server # [ 0.826971] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned vm-test-run-wal2json> server # [ 0.827103] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned vm-test-run-wal2json> server # [ 0.827215] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned vm-test-run-wal2json> server # [ 0.827325] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned vm-test-run-wal2json> server # [ 0.827430] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned vm-test-run-wal2json> server # [ 0.827532] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned vm-test-run-wal2json> server # [ 0.827640] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned vm-test-run-wal2json> server # [ 0.827751] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned vm-test-run-wal2json> server # [ 0.827866] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned vm-test-run-wal2json> server # [ 0.828180] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.828324] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.828429] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.829793] pci 0000:00:0a.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.890060] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.893687] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.895903] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.899236] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.901379] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.903080] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.905398] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.907010] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.909449] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.913169] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.915015] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.933675] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-wal2json> server # [ 0.945008] msm_serial: driver initialized vm-test-run-wal2json> server # [ 0.946919] SuperH (H)SCI(F) driver initialized vm-test-run-wal2json> server # [ 0.947810] STM32 USART driver initialized vm-test-run-wal2json> server # [ 1.002342] loop: module loaded vm-test-run-wal2json> server # [ 1.003049] virtio_blk virtio5: 2/0/0 default/read/poll queues vm-test-run-wal2json> server # [ 1.007209] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-wal2json> server # [ 1.021717] megasas: 07.727.03.00-rc1 vm-test-run-wal2json> server # [ 1.026026] Freeing initrd memory: 10684K vm-test-run-wal2json> server # [ 1.027024] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] vm-test-run-wal2json> server # [ 1.030085] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.030706] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.032521] Using buffer write method vm-test-run-wal2json> server # [ 1.033139] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] vm-test-run-wal2json> server # [ 1.034596] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.034835] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.036027] Using buffer write method vm-test-run-wal2json> server # [ 1.036295] Concatenating MTD devices: vm-test-run-wal2json> server # [ 1.036424] (0): "0.flash" vm-test-run-wal2json> server # [ 1.036501] (1): "0.flash" vm-test-run-wal2json> server # [ 1.037362] into device "0.flash" vm-test-run-wal2json> server # [ 1.061800] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-wal2json> server # [ 1.073935] thunder_xcv, ver 1.0 vm-test-run-wal2json> server # [ 1.074190] thunder_bgx, ver 1.0 vm-test-run-wal2json> server # [ 1.074353] nicpf, ver 1.0 vm-test-run-wal2json> server # [ 1.076996] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version vm-test-run-wal2json> server # [ 1.077551] hns3: Copyright (c) 2017 Huawei Corporation. vm-test-run-wal2json> server # [ 1.078012] hclge is initializing vm-test-run-wal2json> server # [ 1.078221] e1000: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.078306] e1000: Copyright (c) 1999-2006 Intel Corporation. vm-test-run-wal2json> server # [ 1.078522] e1000e: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.078617] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. vm-test-run-wal2json> server # [ 1.078801] igb: Intel(R) Gigabit Ethernet Network Driver vm-test-run-wal2json> server # [ 1.078888] igb: Copyright (c) 2007-2014 Intel Corporation. vm-test-run-wal2json> server # [ 1.079076] igbvf: Intel(R) Gigabit Virtual Function Network Driver vm-test-run-wal2json> server # [ 1.079177] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. vm-test-run-wal2json> server # [ 1.079900] sky2: driver version 1.30 vm-test-run-wal2json> server # [ 1.087980] ehci-pci 0000:00:0a.0: EHCI Host Controller vm-test-run-wal2json> server # [ 1.088671] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 vm-test-run-wal2json> server # [ 1.090515] usbcore: registered new interface driver usb-storage vm-test-run-wal2json> server # [ 1.091194] usbcore: registered new interface driver usbserial_generic vm-test-run-wal2json> server # [ 1.091737] usbserial: USB Serial support registered for generic vm-test-run-wal2json> server # [ 1.094555] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 vm-test-run-wal2json> server # [ 1.102504] rtc-pl031 9010000.pl031: registered as rtc0 vm-test-run-wal2json> server # [ 1.103144] rtc-pl031 9010000.pl031: setting system clock to 2026-11-15T17:03:42 UTC (1794762222) vm-test-run-wal2json> server # [ 1.105264] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 vm-test-run-wal2json> server # [ 1.105879] i2c_dev: i2c /dev entries driver vm-test-run-wal2json> server # [ 1.113109] hub 1-0:1.0: USB hub found vm-test-run-wal2json> server # [ 1.113861] hub 1-0:1.0: 6 ports detected vm-test-run-wal2json> server # [ 1.119996] sdhci: Secure Digital Host Controller Interface driver vm-test-run-wal2json> server # [ 1.120295] sdhci: Copyright(c) Pierre Ossman vm-test-run-wal2json> server # [ 1.122212] Synopsys Designware Multimedia Card Interface Driver vm-test-run-wal2json> server # [ 1.123943] sdhci-pltfm: SDHCI platform and OF driver helper vm-test-run-wal2json> server # [ 1.131480] hid: raw HID events driver (C) Jiri Kosina vm-test-run-wal2json> server # [ 1.133860] usbcore: registered new interface driver usbhid vm-test-run-wal2json> server # [ 1.134051] usbhid: USB HID core driver vm-test-run-wal2json> server # [ 1.142303] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available vm-test-run-wal2json> server # [ 1.154067] drop_monitor: Initializing network drop monitor service vm-test-run-wal2json> server # [ 1.155317] NET: Registered PF_INET6 protocol family vm-test-run-wal2json> server # [ 1.171969] Segment Routing with IPv6 vm-test-run-wal2json> server # [ 1.172901] In-situ OAM (IOAM) with IPv6 vm-test-run-wal2json> server # [ 1.173980] NET: Registered PF_PACKET protocol family vm-test-run-wal2json> server # [ 1.175265] 9pnet: Installing 9P2000 support vm-test-run-wal2json> server # [ 1.180290] Key type dns_resolver registered vm-test-run-wal2json> server # [ 1.217001] registered taskstats version 1 vm-test-run-wal2json> server # [ 1.219053] Loading compiled-in X.509 certificates vm-test-run-wal2json> server # [ 1.277901] Demotion targets for Node 0: null vm-test-run-wal2json> server # [ 1.280612] Key type .fscrypt registered vm-test-run-wal2json> server # [ 1.280778] Key type fscrypt-provisioning registered vm-test-run-wal2json> server # [ 1.291889] input: gpio-keys as /devices/platform/gpio-keys/input/input0 vm-test-run-wal2json> server # [ 1.338651] clk: Disabling unused clocks vm-test-run-wal2json> server # [ 1.338941] PM: genpd: Disabling unused power domains vm-test-run-wal2json> server # [ 1.339390] ALSA device list: vm-test-run-wal2json> server # [ 1.339517] No soundcards found. vm-test-run-wal2json> server # [ 1.425032] Freeing unused kernel memory: 4416K vm-test-run-wal2json> server # [ 1.426448] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-wal2json> server # [ 1.427646] Run /init as init process vm-test-run-wal2json> server # [ 1.619638] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 vm-test-run-wal2json> server # [ 1.742724] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 vm-test-run-wal2json> server # [ 1.860873] usb 1-2: new high-speed USB device number 3 using ehci-pci vm-test-run-wal2json> server # [ 2.010649] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev vm-test-run-wal2json> server # [ 2.039810] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 vm-test-run-wal2json> server # [ 2.048841] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 vm-test-run-wal2json> server # [ 2.151564] [drm] pci: virtio-gpu-pci detected at 0000:00:09.0 vm-test-run-wal2json> server # [ 2.152380] [drm] features: -virgl +edid -resource_blob -host_visible vm-test-run-wal2json> server # [ 2.152407] [drm] features: -context_init vm-test-run-wal2json> server # [ 2.154603] [drm] number of scanouts: 1 vm-test-run-wal2json> server # [ 2.154743] [drm] number of cap sets: 0 vm-test-run-wal2json> server # [ 2.165600] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:09.0 on minor 0 vm-test-run-wal2json> server # [ 2.198224] Console: switching to colour frame buffer device 160x50 vm-test-run-wal2json> server # [ 2.210542] virtio-pci 0000:00:09.0: [drm] fb0: virtio_gpudrmfb frame buffer device vm-test-run-wal2json> server # [ 5.059503] EXT4-fs (vda): mounted filesystem 3e1a72f3-1233-4f23-b80a-e2f2cdfac58f r/w with ordered data mode. Quota mode: none. vm-test-run-wal2json> server # [ 7.819407] EXT4-fs (vda): re-mounted 3e1a72f3-1233-4f23-b80a-e2f2cdfac58f. vm-test-run-wal2json> server # [ 7.841546] booting system configuration /nix/store/jw3gakad9xzrps7zrfw0b9rj0945fvbn-nixos-system-server-test vm-test-run-wal2json> server # [ 21.579072] systemd[1]: systemd 258.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) vm-test-run-wal2json> server # [ 21.589498] systemd[1]: Detected virtualization qemu. vm-test-run-wal2json> server # [ 21.595603] systemd[1]: Detected architecture arm64. vm-test-run-wal2json> server # [ 21.601190] systemd[1]: Detected first boot. vm-test-run-wal2json> server # [ 21.632793] systemd[1]: Initializing machine ID from random generator. vm-test-run-wal2json> server # [ 21.671443] systemd[1]: Hostname set to . vm-test-run-wal2json> server # [ 22.948832] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-wal2json> server # [ 24.470714] NET: Registered PF_VSOCK protocol family vm-test-run-wal2json> server # [ 24.523975] Guest personality initialized and is inactive vm-test-run-wal2json> server # [ 24.532350] VMCI host device registered (name=vmci, major=10, minor=261) vm-test-run-wal2json> server # [ 24.536698] Initialized host personality vm-test-run-wal2json> server # [ 24.792936] systemd[1]: Applying preset policy. vm-test-run-wal2json> server # [ 29.120538] systemd[1]: Populated /etc with preset unit settings. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 33.110497] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-wal2json> server # [ 33.335252] systemd[1]: Created slice Slice /system/getty. vm-test-run-wal2json> server # [ 33.351916] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-wal2json> server # [ 33.367167] systemd[1]: Created slice User and Session Slice. vm-test-run-wal2json> server # [ 33.376248] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-wal2json> server # [ 33.382679] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-wal2json> server # [ 33.388452] systemd[1]: Expecting device /dev/hvc0... vm-test-run-wal2json> server # [ 33.393670] systemd[1]: Expecting device /dev/ttyAMA0... vm-test-run-wal2json> server # [ 33.396478] systemd[1]: Expecting device /sys/subsystem/net/devices/eth1... vm-test-run-wal2json> server # [ 33.402085] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-wal2json> server # [ 33.406812] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-wal2json> server # [ 33.411110] systemd[1]: Reached target Path Units. vm-test-run-wal2json> server # [ 33.416331] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 33.421276] systemd[1]: Reached target Slice Units. vm-test-run-wal2json> server # [ 33.426048] systemd[1]: Reached target Swaps. vm-test-run-wal2json> server # [ 33.462848] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-wal2json> server # [ 33.484798] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-wal2json> server # [ 33.498281] systemd[1]: Listening on Journal Audit Socket. vm-test-run-wal2json> server # [ 33.505665] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-wal2json> server # [ 33.511385] systemd[1]: Listening on Journal Sockets. vm-test-run-wal2json> server # [ 33.520619] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-wal2json> server # [ 33.526508] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 33.533204] systemd[1]: Listening on udev Control Socket. vm-test-run-wal2json> server # [ 33.538424] systemd[1]: Listening on udev Kernel Socket. vm-test-run-wal2json> server # [ 33.588091] systemd[1]: Mounting Huge Pages File System... vm-test-run-wal2json> server # [ 33.627285] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-wal2json> server # [ 33.675079] systemd[1]: Mounting Kernel Debug File System... vm-test-run-wal2json> server # [ 33.779364] systemd[1]: Mounting Kernel Trace File System... vm-test-run-wal2json> server # [ 33.914090] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-wal2json> server # [ 34.001357] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-wal2json> server # [ 34.010659] systemd[1]: Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs). vm-test-run-wal2json> server # [ 34.204022] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-wal2json> server # [ 34.235635] systemd[1]: Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm). vm-test-run-wal2json> server # [ 34.254278] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 34.385347] systemd[1]: Starting Load Kernel Module fuse... vm-test-run-wal2json> server # [ 34.401908] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 34.413617] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 34.536027] systemd[1]: Starting Journal Service... vm-test-run-wal2json> server # [ 34.646492] systemd[1]: Starting Load Kernel Modules... vm-test-run-wal2json> server # [ 34.729855] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-wal2json> server # [ 34.789009] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-wal2json> server # [ 34.794978] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 34.873691] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-wal2json> server # [ 34.971208] systemd[1]: Mounted Huge Pages File System. vm-test-run-wal2json> server # [ 34.983782] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-wal2json> server # [ 35.000494] systemd[1]: Mounted Kernel Debug File System. vm-test-run-wal2json> server # [ 35.015121] systemd[1]: Mounted Kernel Trace File System. vm-test-run-wal2json> server # [ 35.038545] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-wal2json> server # [ 35.058835] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-wal2json> server # [ 35.149617] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-wal2json> server # [ 35.234033] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-wal2json> server # [ 35.252150] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-wal2json> server # [ 35.962402] fuse: init (API version 7.41) vm-test-run-wal2json> server # [ 35.978215] systemd[1]: Finished Load Kernel Modules. vm-test-run-wal2json> server # [ 36.064199] systemd[1]: Starting Firewall... vm-test-run-wal2json> server # [ 36.140310] systemd[1]: Starting Apply Kernel Variables... vm-test-run-wal2json> server # [ 36.165433] systemd[1]: modprobe@fuse.service: Deactivated successfully. vm-test-run-wal2json> server # [ 36.184076] EXT4-fs (vda): re-mounted 3e1a72f3-1233-4f23-b80a-e2f2cdfac58f. vm-test-run-wal2json> server # [ 36.185692] systemd[1]: Finished Load Kernel Module fuse. vm-test-run-wal2json> server # [ 36.299789] systemd[1]: Mounting FUSE Control File System... vm-test-run-wal2json> server # [ 36.370101] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-wal2json> server # [ 36.387567] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 36.478529] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-wal2json> server # [ 36.489717] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 36.655820] systemd[1]: Mounted FUSE Control File System. vm-test-run-wal2json> server # [ 36.673962] systemd-journald[398]: Collecting audit messages is enabled. vm-test-run-wal2json> server # [ 37.542000] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-wal2json> server # [ 37.554809] systemd[1]: Reached target First Boot Complete. vm-test-run-wal2json> server # [ 37.650808] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-wal2json> server # [ 37.838081] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-wal2json> server # [ 38.011957] systemd[1]: Finished Apply Kernel Variables. vm-test-run-wal2json> server # [ 38.238442] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-wal2json> server # [ 39.071881] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-wal2json> server # [ 39.098666] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-wal2json> server # [ 39.170106] systemd[1]: Mounting /run/wrappers... vm-test-run-wal2json> server # [ 39.229006] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-wal2json> server # [ 39.637975] systemd[1]: Mounted /run/wrappers. vm-test-run-wal2json> server # [ 39.646713] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 39.680119] systemd[1]: Listening on Boot Entries Service Socket. vm-test-run-wal2json> server # [ 39.611889] systemd-modules-load[399]: Module 'atkbd' is built in vm-test-run-wal2json> server # [ 39.634647] systemd-modules-load[399]: Module 'loop' is built in vm-test-run-wal2json> server # [ 39.655291] systemd-oomd[400]: No swap; memory pressure usage will be degraded vm-test-run-wal2json> server # [ 39.743059] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 39.754713] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 39.814893] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-wal2json> server # [ 39.834237] systemd[1]: Started Journal Service. vm-test-run-wal2json> server # [ 40.117938] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-wal2json> server # [ 40.677980] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-wal2json> server # [ 40.729818] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-wal2json> server # [ 40.983731] systemd-udevd[428]: Using default interface naming scheme 'v258'. vm-test-run-wal2json> server # [ 41.162294] systemd-journald[398]: Received client request to flush runtime journal. vm-test-run-wal2json> server # [ 41.671640] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-wal2json> server # [ 41.703053] systemd[1]: Starting Create System Files and Directories... vm-test-run-wal2json> server # [ 43.686518] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-wal2json> server # [ 44.067987] systemd[1]: Finished Create System Files and Directories. vm-test-run-wal2json> server # [ 44.153773] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-wal2json> server # [ 44.210631] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-wal2json> server # [ 45.338552] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-wal2json> server # [ 46.579527] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-wal2json> server # [ 46.632416] systemd[1]: Starting Update is Completed... vm-test-run-wal2json> server # [ 47.353066] systemd[1]: Finished Update is Completed. vm-test-run-wal2json> server # [ 51.042547] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 51.066072] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 51.078218] systemd[1]: suid-sgid-wrappers.service: Consumed 3.053s CPU time, 5.6M memory peak. vm-test-run-wal2json> server # [ 53.740530] systemd[1]: Finished Firewall. vm-test-run-wal2json> server # [ 55.549909] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-wal2json> server # [ 55.569418] systemd[1]: Reached target System Initialization. vm-test-run-wal2json> server # [ 55.577803] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-wal2json> server # [ 55.582013] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-wal2json> server # [ 55.590978] systemd[1]: Reached target Timer Units. vm-test-run-wal2json> server # [ 55.601893] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-wal2json> server # [ 55.604329] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-wal2json> server # [ 55.610938] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-wal2json> server # [ 55.653955] systemd[1]: Starting OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK)... vm-test-run-wal2json> server # [ 55.658605] systemd[1]: Listening on Hostname Service Socket. vm-test-run-wal2json> server # [ 55.811733] (sh-issue)[631]: sshd-vsock.socket: Unable to locate executable '/usr/lib/systemd/systemd-ssh-issue': No such file or directory vm-test-run-wal2json> server # [ 55.855481] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK). vm-test-run-wal2json> server # [ 55.862539] systemd[1]: Reached target Socket Units. vm-test-run-wal2json> server # [ 55.865962] systemd[1]: Reached target Basic System. vm-test-run-wal2json> server # [ 55.903753] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-wal2json> server # [ 55.938077] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-wal2json> server # [ 55.994268] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 56.055272] systemd[1]: Started Reset console on configuration changes. vm-test-run-wal2json> server # [ 56.119779] systemd[1]: Starting resolvconf update... vm-test-run-wal2json> server # [ 56.186155] systemd[1]: Starting SSH Host Keys Generation... vm-test-run-wal2json> server # [ 57.533055] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-wal2json> server # [ 57.902071] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 57.911539] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 57.920037] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 57.976716] dbus-daemon[633]: dbus[633]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 58.022286] systemd[1]: Starting User Login Management... vm-test-run-wal2json> server # [ 58.071646] nsncd[635]: Nov 15 17:04:39.337 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 58.729558] systemd[1]: Started D-Bus System Message Bus. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 59.909100] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 59.942337] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-wal2json> server # [ 59.975672] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-wal2json> server # [ 60.004006] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-wal2json> server # [ 60.019556] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 60.050039] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-wal2json> server # [ 60.052685] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 60.159676] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 60.180802] systemd-logind[664]: New seat seat0. vm-test-run-wal2json> server # [ 60.249189] systemd[1]: Started User Login Management. vm-test-run-wal2json> server # [ 60.336402] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 61.177923] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 61.190694] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 61.355872] nsncd[701]: Nov 15 17:04:42.815 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 61.374595] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 61.380951] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 61.391156] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 61.772629] systemd[1]: Finished resolvconf update. vm-test-run-wal2json> server # [ 61.784916] systemd[1]: Reached target Preparation for Network. vm-test-run-wal2json> server # [ 61.864954] systemd[1]: Starting DHCP Client... vm-test-run-wal2json> server # [ 62.893460] sshd-keygen-start[659]: Generating public/private rsa key pair. vm-test-run-wal2json> server # [ 62.924207] sshd-keygen-start[659]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key vm-test-run-wal2json> server # [ 62.936923] sshd-keygen-start[659]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub vm-test-run-wal2json> server # [ 62.944992] sshd-keygen-start[659]: The key fingerprint is: vm-test-run-wal2json> server # [ 62.953374] sshd-keygen-start[659]: SHA256:2JAnFJTO3udnzsO2brDABkbmjr9alsbuhqZVtHl/PQ0 root@server vm-test-run-wal2json> server # [ 62.969589] sshd-keygen-start[659]: The key's randomart image is: vm-test-run-wal2json> server # [ 62.975916] sshd-keygen-start[659]: +---[RSA 4096]----+ vm-test-run-wal2json> server # [ 62.990492] sshd-keygen-start[659]: | .+o | vm-test-run-wal2json> server # [ 63.000764] sshd-keygen-start[659]: | .+. | vm-test-run-wal2json> server # [ 63.002133] sshd-keygen-start[659]: | *= . | vm-test-run-wal2json> server # [ 63.010860] sshd-keygen-start[659]: | .*O | vm-test-run-wal2json> server # [ 63.022795] sshd-keygen-start[659]: | ==+S E | vm-test-run-wal2json> server # [ 63.033108] sshd-keygen-start[659]: | .ooo=.o . o | vm-test-run-wal2json> server # [ 63.034903] sshd-keygen-start[659]: | .o*. +.+. o .| vm-test-run-wal2json> server # [ 63.041061] sshd-keygen-start[659]: | .o=o ooB . | vm-test-run-wal2json> server # [ 63.042893] sshd-keygen-start[659]: | .o.++. B=o | vm-test-run-wal2json> server # [ 63.043919] sshd-keygen-start[659]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 63.624028] sshd-keygen-start[766]: Generating public/private ed25519 key pair. vm-test-run-wal2json> server # [ 63.634277] sshd-keygen-start[766]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key vm-test-run-wal2json> server # [ 63.637576] sshd-keygen-start[766]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub vm-test-run-wal2json> server # [ 63.645813] sshd-keygen-start[766]: The key fingerprint is: vm-test-run-wal2json> server # [ 63.659269] sshd-keygen-start[766]: SHA256:tdvMO4dYLLE9UaYuMSwz9yK2AjzAgsIDbTVQvxTHX4k root@server vm-test-run-wal2json> server # [ 63.669860] sshd-keygen-start[766]: The key's randomart image is: vm-test-run-wal2json> server # [ 63.693033] sshd-keygen-start[766]: +--[ED25519 256]--+ vm-test-run-wal2json> server # [ 63.697562] sshd-keygen-start[766]: | ..++ ... . . | vm-test-run-wal2json> server # [ 63.714953] sshd-keygen-start[766]: |. o o o. E o o | vm-test-run-wal2json> server # [ 63.724471] sshd-keygen-start[766]: |+o o o.. + | vm-test-run-wal2json> server # [ 63.731576] sshd-keygen-start[766]: |+oo . .+.B.o | vm-test-run-wal2json> server # [ 63.745949] sshd-keygen-start[766]: |...o . S=.X . | vm-test-run-wal2json> server # [ 63.747129] sshd-keygen-start[766]: | + o ==B | vm-test-run-wal2json> server # [ 63.751333] sshd-keygen-start[766]: | o . o.*+o | vm-test-run-wal2json> server # [ 63.761381] sshd-keygen-start[766]: | . . . o.. | vm-test-run-wal2json> server # [ 63.763042] sshd-keygen-start[766]: | . .o | vm-test-run-wal2json> server # [ 63.765759] sshd-keygen-start[766]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 63.779225] systemd[1]: sshd-keygen.service: Deactivated successfully. vm-test-run-wal2json> server # [ 63.782882] systemd[1]: Finished SSH Host Keys Generation. vm-test-run-wal2json> server # [ 63.790013] systemd[1]: sshd-keygen.service: Consumed 2.905s CPU time, 2.9M memory peak. vm-test-run-wal2json> server # [ 63.988312] dhcpcd[751]: dhcpcd-10.2.4 starting vm-test-run-wal2json> server # [ 64.122572] dhcpcd[776]: dev: loaded udev vm-test-run-wal2json> server # [ 64.584911] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-wal2json> server # [ 65.007450] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-wal2json> server # [ 65.261201] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-wal2json> server # [ 65.266737] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-wal2json> server # [ 65.292015] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 vm-test-run-wal2json> server # [ 65.299127] cfg80211: failed to load regulatory.db vm-test-run-wal2json> server # [ 66.026705] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-wal2json> server # [ 66.006439] dhcpcd[776]: eth0: waiting for carrier vm-test-run-wal2json> server # [ 66.014980] dhcpcd[776]: eth0: carrier acquired vm-test-run-wal2json> server # [ 66.196993] dhcpcd[776]: DUID 00:01:00:01:32:8c:a2:af:52:54:00:12:34:56 vm-test-run-wal2json> server # [ 66.207959] dhcpcd[776]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 66.211878] dhcpcd[776]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-wal2json> server # [ 67.053400] systemd[1]: Found device /dev/hvc0. vm-test-run-wal2json> server # [ 67.283835] systemd[1]: Found device /dev/ttyAMA0. vm-test-run-wal2json> server # [ 67.353864] systemd[1]: Started backdoor.service. vm-test-run-wal2json> server # [ 67.792039] dhcpcd[776]: eth0: soliciting a DHCP lease vm-test-run-wal2json> server # [ 67.823623] dhcpcd[776]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-wal2json> server # [ 67.855357] dhcpcd[776]: eth0: probing address 10.0.2.15/24 vm-test-run-wal2json> server # connecting to host... vm-test-run-wal2json> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-wal2json> server: connected to guest root shell vm-test-run-wal2json> server: (connecting took 69.17 seconds) vm-test-run-wal2json> server: (finished: waiting for the VM to finish booting, in 69.17 seconds) vm-test-run-wal2json> server # [ 68.226572] dhcpcd[776]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 68.241125] dhcpcd[776]: eth0: Router Advertisement from fe80::2 vm-test-run-wal2json> server # [ 68.254016] dhcpcd[776]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-wal2json> server # [ 68.267051] dhcpcd[776]: eth0: adding route to fec0::/64 vm-test-run-wal2json> server # [ 68.277448] dhcpcd[776]: eth0: adding default route via fe80::2 vm-test-run-wal2json> server # [ 71.451998] (udev-worker)[836]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-wal2json> server # [ 71.463041] (udev-worker)[847]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 71.466201] (udev-worker)[836]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 72.207214] systemd[1]: Found device Virtio network device. vm-test-run-wal2json> server # [ 72.237836] systemd[1]: Starting Address configuration of eth1... vm-test-run-wal2json> server # [ 72.309835] dhcpcd[776]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 72.977779] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-wal2json> server # [ 72.978947] dhcpcd[776]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 73.152657] network-addresses-eth1-start[869]: adding address 192.168.1.1/24... done vm-test-run-wal2json> server # [ 73.356705] network-addresses-eth1-start[869]: adding address 2001:db8:1::1/64... done vm-test-run-wal2json> server # [ 73.729425] systemd[1]: Finished Address configuration of eth1. vm-test-run-wal2json> server # [ 73.775528] systemd[1]: Starting Networking Setup... vm-test-run-wal2json> server # [ 74.162199] dhcpcd[776]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 74.175903] dhcpcd[776]: eth0: adding route to 10.0.2.0/24 vm-test-run-wal2json> server # [ 74.187344] dhcpcd[776]: eth0: adding default route via 10.0.2.2 vm-test-run-wal2json> server # [ 76.782827] dhcpcd[776]: eth0: rebinding lease of 10.0.2.15 vm-test-run-wal2json> server # [ 76.841757] systemd[1]: Started DHCP Client. vm-test-run-wal2json> server # [ 76.848876] dhcpcd[776]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 77.769927] systemd-logind[664]: Watching system buttons on /dev/input/event0 (gpio-keys) vm-test-run-wal2json> server # [ 79.246528] systemd[1]: Finished Networking Setup. vm-test-run-wal2json> server # [ 79.256468] systemd[1]: Reached target Network. vm-test-run-wal2json> server # [ 79.300964] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 79.371881] systemd[1]: Starting SSH Daemon... vm-test-run-wal2json> server # [ 79.408811] systemd[1]: Starting Permit User Sessions... vm-test-run-wal2json> server # [ 80.196622] systemd[1]: Finished Permit User Sessions. vm-test-run-wal2json> server # [ 80.323404] systemd[1]: Started Getty on tty1. vm-test-run-wal2json> server # [ 80.349895] systemd[1]: Reached target Login Prompts. vm-test-run-wal2json> server # [ 80.578633] sshd[1045]: Server listening on 0.0.0.0 port 22. vm-test-run-wal2json> server # [ 80.579885] sshd[1045]: Server listening on :: port 22. vm-test-run-wal2json> server # [ 80.589061] systemd[1]: Started SSH Daemon. vm-test-run-wal2json> server # [ 83.021848] postgresql-pre-start[1068]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 83.027572] postgresql-pre-start[1068]: This user must also own the server process. vm-test-run-wal2json> server # [ 83.141473] postgresql-pre-start[1068]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 83.149377] postgresql-pre-start[1068]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 83.152256] postgresql-pre-start[1068]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 83.152702] postgresql-pre-start[1068]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 83.161085] postgresql-pre-start[1068]: fixing permissions on existing directory /var/lib/postgresql/15 ... ok vm-test-run-wal2json> server # [ 83.164204] postgresql-pre-start[1068]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 83.174456] postgresql-pre-start[1068]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 84.419482] postgresql-pre-start[1068]: selecting default max_connections ... 100 vm-test-run-wal2json> server # [ 85.153060] postgresql-pre-start[1068]: selecting default shared_buffers ... 128MB vm-test-run-wal2json> server # [ 85.438678] mousedev: PS/2 mouse device common for all mice vm-test-run-wal2json> server # [ 89.085795] systemd-logind[664]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) vm-test-run-wal2json> server # [ 104.411218] postgresql-pre-start[1068]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 104.434399] postgresql-pre-start[1068]: creating configuration files ... ok vm-test-run-wal2json> server # [ 109.027744] postgresql-pre-start[1068]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 121.783047] postgresql-pre-start[1068]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 124.680055] postgresql-pre-start[1068]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 124.695038] postgresql-pre-start[1068]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 124.695648] postgresql-pre-start[1068]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 124.704668] postgresql-pre-start[1068]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 124.715038] postgresql-pre-start[1068]: /nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/bin/pg_ctl -D /var/lib/postgresql/15 -l logfile start vm-test-run-wal2json> server # [ 126.959177] postgres[1509]: [1509] LOG: starting PostgreSQL 15.20 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 126.965616] postgres[1509]: [1509] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 126.968747] postgres[1509]: [1509] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 126.985541] postgres[1509]: [1509] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 127.083568] postgres[1533]: [1533] LOG: database system was shut down at 2026-11-15 17:05:43 GMT vm-test-run-wal2json> server # [ 127.183218] postgres[1509]: [1509] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 127.219461] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 127.251201] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 129.499762] postgresql-setup-start[1572]: CREATE ROLE vm-test-run-wal2json> server # [ 129.787817] postgresql-setup-start[1575]: ALTER ROLE vm-test-run-wal2json> server # [ 129.852430] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 129.867323] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 129.871234] systemd[1]: Reached target Multi-User System. vm-test-run-wal2json> server # [ 129.877279] systemd[1]: Startup finished in 20.758s (kernel) + 1min 49.104s (userspace) = 2min 9.862s. vm-test-run-wal2json> server: (finished: waiting for unit multi-user.target, in 132.55 seconds) vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 1.12 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.51 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 15 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.49 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.94 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.75 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 15, in 2.18 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 15 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" vm-test-run-wal2json> server # [ 136.263693] sudo[1642]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 wal2json vm-test-run-wal2json> server # [ 136.511376] sudo[1642]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # pg_regress: could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 137.674373] postgres[1660]: [1660] LOG: logical decoding found consistent point at 0/153BF80 vm-test-run-wal2json> server # [ 137.680686] postgres[1660]: [1660] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 137.685628] postgres[1660]: [1660] STATEMENT: select vm-test-run-wal2json> server # [ 137.689521] postgres[1660]: 1 vm-test-run-wal2json> server # [ 137.693507] postgres[1660]: from vm-test-run-wal2json> server # [ 137.697963] postgres[1660]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 137.777050] postgres[1660]: [1660] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 137.779494] postgres[1660]: [1660] DETAIL: Streaming transactions committing after 0/153BFB8, reading WAL from 0/153BF80. vm-test-run-wal2json> server # [ 137.787843] postgres[1660]: [1660] STATEMENT: select vm-test-run-wal2json> server # [ 137.793771] postgres[1660]: data vm-test-run-wal2json> server # [ 137.794916] postgres[1660]: from vm-test-run-wal2json> server # [ 137.800926] postgres[1660]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 137.802281] postgres[1660]: 'reg_test', vm-test-run-wal2json> server # [ 137.802808] postgres[1660]: null, vm-test-run-wal2json> server # [ 137.803351] postgres[1660]: null, vm-test-run-wal2json> server # [ 137.804412] postgres[1660]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 137.811134] postgres[1660]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 137.811957] postgres[1660]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 137.812314] postgres[1660]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 137.812743] postgres[1660]: 'format-version', '2', vm-test-run-wal2json> server # [ 137.818118] postgres[1660]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 137.819481] postgres[1660]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 137.825582] postgres[1660]: ) x; vm-test-run-wal2json> server # [ 137.829510] postgres[1660]: [1660] LOG: logical decoding found consistent point at 0/153BF80 vm-test-run-wal2json> server # [ 137.830897] postgres[1660]: [1660] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 137.837741] postgres[1660]: [1660] STATEMENT: select vm-test-run-wal2json> server # [ 137.839842] postgres[1660]: data vm-test-run-wal2json> server # [ 137.842246] postgres[1660]: from vm-test-run-wal2json> server # [ 137.843243] postgres[1660]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 137.844021] postgres[1660]: 'reg_test', vm-test-run-wal2json> server # [ 137.851614] postgres[1660]: null, vm-test-run-wal2json> server # [ 137.852325] postgres[1660]: null, vm-test-run-wal2json> server # [ 137.852620] postgres[1660]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 137.852901] postgres[1660]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 137.857884] postgres[1660]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 137.858700] postgres[1660]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 137.859497] postgres[1660]: 'format-version', '2', vm-test-run-wal2json> server # [ 137.864869] postgres[1660]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 137.865901] postgres[1660]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 137.866237] postgres[1660]: ) x; vm-test-run-wal2json> server # [ 138.260020] sudo[1642]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" , in 2.93 seconds) vm-test-run-wal2json> (using postmaster on Unix socket, default port) vm-test-run-wal2json> ============== running regression test queries ============== vm-test-run-wal2json> test wal2json ... ok 1213 ms vm-test-run-wal2json> vm-test-run-wal2json> ===================== vm-test-run-wal2json> All 1 tests passed. vm-test-run-wal2json> ===================== vm-test-run-wal2json> vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 15 after extension upgrade, in 2.93 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.54 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.53 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.58 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.65 seconds) vm-test-run-wal2json> subtest: switch to postgresql 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 149.407810] nixos[1700]: switching to system configuration /nix/store/5wysm0jkv6jhg8698fqlw9nj21cr58pc-nixos-system-server-test vm-test-run-wal2json> server # [ 149.439427] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 149.474234] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 149.475357] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 149.480811] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 149.483786] postgres[1509]: [1509] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 149.490801] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 149.505455] postgres[1509]: [1509] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 149.564864] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 149.665847] postgres[1509]: [1509] LOG: background worker "logical replication launcher" (PID 1536) exited with exit code 1 vm-test-run-wal2json> server # [ 149.695268] postgres[1531]: [1531] LOG: shutting down vm-test-run-wal2json> server # [ 149.703019] postgres[1531]: [1531] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 149.940712] postgres[1531]: [1531] LOG: checkpoint complete: wrote 54 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.106 s, sync=0.091 s, total=0.277 s; sync files=48, longest=0.018 s, average=0.002 s; distance=149 kB, estimate=149 kB vm-test-run-wal2json> server # [ 149.986582] postgres[1509]: [1509] LOG: database system is shut down vm-test-run-wal2json> server # [ 150.056098] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 150.072396] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 150.080810] systemd[1]: postgresql.service: Consumed 24.074s CPU time, 91.9M memory peak, 46.5M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 158.635091] systemd[1]: Reload requested from client PID 1700 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 158.649604] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 165.759467] systemd[1]: Reloading finished in 7106 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 166.209029] systemd[1]: Starting Re-setup tmpfiles on a system that is already running.... vm-test-run-wal2json> server # [ 167.746105] systemd[1]: Finished Re-setup tmpfiles on a system that is already running.. vm-test-run-wal2json> server # [ 167.767943] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 167.833676] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 168.414008] dbus-daemon[633]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 168.759753] dbus-daemon[633]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 168.799418] dbus-send[1907]: method return time=1794762390.233154 sender=org.freedesktop.DBus -> destination=:1.5 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 168.898916] dbus-daemon[633]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 169.283808] dbus-daemon[633]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 169.318101] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 169.502183] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 169.542410] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 169.640952] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 169.647733] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 169.809865] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 169.879725] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 169.887335] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 170.049468] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 170.097709] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 170.099461] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 170.125977] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 170.139189] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 170.147989] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 170.183876] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 170.276144] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 170.303777] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 171.989871] postgresql-migrate-start[1936]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 171.994564] postgresql-migrate-start[1936]: This user must also own the server process. vm-test-run-wal2json> server # [ 172.123746] postgresql-migrate-start[1936]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 172.133332] postgresql-migrate-start[1936]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 172.135191] postgresql-migrate-start[1936]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 172.136065] postgresql-migrate-start[1936]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 172.142252] postgresql-migrate-start[1936]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 172.153768] postgresql-migrate-start[1936]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 172.155698] postgresql-migrate-start[1936]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 173.834396] postgresql-migrate-start[1936]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 174.894050] postgresql-migrate-start[1936]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 178.026661] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 178.031195] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 178.038054] systemd[1]: suid-sgid-wrappers.service: Consumed 3.117s CPU time, 3.3M memory peak. vm-test-run-wal2json> server # [ 184.005949] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:08.0/virtio7/input/input3 vm-test-run-wal2json> server # [ 186.382725] postgresql-migrate-start[1936]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 186.411074] postgresql-migrate-start[1936]: creating configuration files ... ok vm-test-run-wal2json> server # [ 189.848160] postgresql-migrate-start[1936]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 193.064338] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 193.925322] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 193.943893] systemd[1]: Stopped Virtual Console Setup. vm-test-run-wal2json> server # [ 194.048858] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 194.386836] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-wal2json> server # [ 198.254977] systemd[1]: Finished Virtual Console Setup. vm-test-run-wal2json> server # [ 200.057702] systemd-logind[664]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-wal2json> server # [ 200.296912] postgresql-migrate-start[1936]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 201.648021] postgresql-migrate-start[1936]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 201.650754] postgresql-migrate-start[1936]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 201.651559] postgresql-migrate-start[1936]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 201.654040] postgresql-migrate-start[1936]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 201.655907] postgresql-migrate-start[1936]: /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 205.001768] postgresql-migrate-start[2185]: Performing Consistency Checks vm-test-run-wal2json> server # [ 205.003574] postgresql-migrate-start[2185]: ----------------------------- vm-test-run-wal2json> server # [ 205.006244] postgresql-migrate-start[2185]: Checking cluster versions ok vm-test-run-wal2json> server # [ 207.147776] postgresql-migrate-start[2185]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 207.198586] postgresql-migrate-start[2185]: Checking database connection settings ok vm-test-run-wal2json> server # [ 207.261311] postgresql-migrate-start[2185]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 207.263463] postgresql-migrate-start[2185]: Checking for contrib/isn with bigint-passing mismatch ok vm-test-run-wal2json> server # [ 207.843223] postgresql-migrate-start[2185]: Checking data type usage ok vm-test-run-wal2json> server # [ 207.997965] postgresql-migrate-start[2185]: Checking for not-null constraint inconsistencies ok vm-test-run-wal2json> server # [ 208.542761] postgresql-migrate-start[2185]: Creating dump of global objects ok vm-test-run-wal2json> server # [ 210.283475] postgresql-migrate-start[2185]: Creating dump of database schemas ok vm-test-run-wal2json> server # [ 212.195292] postgresql-migrate-start[2185]: Checking for presence of required libraries ok vm-test-run-wal2json> server # [ 212.261062] postgresql-migrate-start[2185]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 212.318064] postgresql-migrate-start[2185]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 212.320473] postgresql-migrate-start[2185]: Checking for new cluster tablespace directories ok vm-test-run-wal2json> server # [ 212.328611] postgresql-migrate-start[2185]: If pg_upgrade fails after this point, you must re-initdb the vm-test-run-wal2json> server # [ 212.331264] postgresql-migrate-start[2185]: new cluster before continuing. vm-test-run-wal2json> server # [ 212.334512] postgresql-migrate-start[2185]: Performing Upgrade vm-test-run-wal2json> server # [ 212.336368] postgresql-migrate-start[2185]: ------------------ vm-test-run-wal2json> server # [ 212.372465] postgresql-migrate-start[2185]: Setting locale and encoding for new cluster ok vm-test-run-wal2json> server # [ 214.417233] postgresql-migrate-start[2185]: Analyzing all rows in the new cluster ok vm-test-run-wal2json> server # [ 215.315472] postgresql-migrate-start[2185]: Freezing all rows in the new cluster ok vm-test-run-wal2json> server # [ 215.611843] postgresql-migrate-start[2185]: Deleting files from new pg_xact ok vm-test-run-wal2json> server # [ 215.715512] postgresql-migrate-start[2185]: Copying old pg_xact to new server ok vm-test-run-wal2json> server # [ 216.005007] postgresql-migrate-start[2185]: Setting oldest XID for new cluster ok vm-test-run-wal2json> server # [ 216.870082] postgresql-migrate-start[2185]: Setting next transaction ID and epoch for new cluster ok vm-test-run-wal2json> server # [ 216.872811] postgresql-migrate-start[2185]: Deleting files from new pg_multixact/offsets ok vm-test-run-wal2json> server # [ 216.998776] postgresql-migrate-start[2185]: Copying old pg_multixact/offsets to new server ok vm-test-run-wal2json> server # [ 217.000006] postgresql-migrate-start[2185]: Deleting files from new pg_multixact/members ok vm-test-run-wal2json> server # [ 217.143766] postgresql-migrate-start[2185]: Copying old pg_multixact/members to new server ok vm-test-run-wal2json> server # [ 217.434620] postgresql-migrate-start[2185]: Setting next multixact ID and offset for new cluster ok vm-test-run-wal2json> server # [ 217.714789] postgresql-migrate-start[2185]: Resetting WAL archives ok vm-test-run-wal2json> server # [ 219.155506] postgresql-migrate-start[2185]: Setting frozenxid and minmxid counters in new cluster ok vm-test-run-wal2json> server # [ 219.482086] postgresql-migrate-start[2185]: Restoring global objects in the new cluster ok vm-test-run-wal2json> server # [ 221.235452] postgresql-migrate-start[2185]: Restoring database schemas in the new cluster ok vm-test-run-wal2json> server # [ 221.868166] postgresql-migrate-start[2185]: Copying user relation files ok vm-test-run-wal2json> server # [ 222.176388] postgresql-migrate-start[2185]: Setting next OID for new cluster ok vm-test-run-wal2json> server # [ 223.704750] postgresql-migrate-start[2185]: Sync data directory to disk ok vm-test-run-wal2json> server # [ 223.707968] postgresql-migrate-start[2185]: Creating script to delete old cluster ok vm-test-run-wal2json> server # [ 225.646823] postgresql-migrate-start[2185]: Checking for extension updates ok vm-test-run-wal2json> server # [ 225.886155] postgresql-migrate-start[2185]: Upgrade Complete vm-test-run-wal2json> server # [ 225.887217] postgresql-migrate-start[2185]: ---------------- vm-test-run-wal2json> server # [ 225.889476] postgresql-migrate-start[2185]: Optimizer statistics are not transferred by pg_upgrade. vm-test-run-wal2json> server # [ 225.890740] postgresql-migrate-start[2185]: Once you start the new server, consider running: vm-test-run-wal2json> server # [ 225.891577] postgresql-migrate-start[2185]: /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/bin/vacuumdb --all --analyze-in-stages vm-test-run-wal2json> server # [ 225.894193] postgresql-migrate-start[2185]: Running this script will delete the old cluster's data files: vm-test-run-wal2json> server # [ 225.895024] postgresql-migrate-start[2185]: ./delete_old_cluster.sh vm-test-run-wal2json> server # [ 225.942855] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 225.991105] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 227.302070] postgres[2345]: [2345] LOG: starting PostgreSQL 17.12 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 227.304363] postgres[2345]: [2345] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 227.306866] postgres[2345]: [2345] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 227.317976] postgres[2345]: [2345] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 227.378158] postgres[2351]: [2351] LOG: database system was shut down at 2026-11-15 17:07:27 GMT vm-test-run-wal2json> server # [ 227.454938] postgres[2345]: [2345] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 227.475072] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 227.508097] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 228.304992] postgresql-setup-start[2361]: ALTER ROLE vm-test-run-wal2json> server # [ 228.354616] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 228.369100] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # the following new units were started: postgresql-migrate.service, sys-devices-platform-4010000000.pcie-pci0000:00-0000:00:0b.0-virtio9-virtio\x2dports-vport9p0.device, sys-devices-virtual-input-mice.device, sys-devices-virtual-misc-rfkill.device, sys-devices-virtual-misc-tun.device, sys-devices-virtual-mtd-mtd0ro.device, sysinit-reactivation.target, systemd-rfkill.socket, systemd-tmpfiles-resetup.service, systemd-vconsole-setup.service vm-test-run-wal2json> server # [ 228.661782] nixos[1700]: finished switching to system configuration /nix/store/5wysm0jkv6jhg8698fqlw9nj21cr58pc-nixos-system-server-test vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 0.73 seconds) vm-test-run-wal2json> server: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no' vm-test-run-wal2json> server: (finished: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no', in 0.15 seconds) vm-test-run-wal2json> (finished: subtest: switch to postgresql 17, in 89.60 seconds) vm-test-run-wal2json> subtest: Check last version of the extension after postgresql upgrade vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.32 seconds) vm-test-run-wal2json> (finished: subtest: Check last version of the extension after postgresql upgrade, in 0.32 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.32 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.40 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.34 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 17, in 1.06 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 231.324823] sudo[2387]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 231.439045] sudo[2387]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 231.916150] postgres[2394]: [2394] LOG: logical decoding found consistent point at 0/8034EC8 vm-test-run-wal2json> server # [ 231.919867] postgres[2394]: [2394] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 231.921379] postgres[2394]: [2394] STATEMENT: select vm-test-run-wal2json> server # [ 231.921814] postgres[2394]: 1 vm-test-run-wal2json> server # [ 231.922690] postgres[2394]: from vm-test-run-wal2json> server # [ 231.923010] postgres[2394]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 231.952464] postgres[2394]: [2394] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 231.953370] postgres[2394]: [2394] DETAIL: Streaming transactions committing after 0/8034F00, reading WAL from 0/8034EC8. vm-test-run-wal2json> server # [ 231.954041] postgres[2394]: [2394] STATEMENT: select vm-test-run-wal2json> server # [ 231.954643] postgres[2394]: data vm-test-run-wal2json> server # [ 231.955259] postgres[2394]: from vm-test-run-wal2json> server # [ 231.955850] postgres[2394]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 231.957774] postgres[2394]: 'reg_test', vm-test-run-wal2json> server # [ 231.958618] postgres[2394]: null, vm-test-run-wal2json> server # [ 231.959240] postgres[2394]: null, vm-test-run-wal2json> server # [ 231.960090] postgres[2394]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 231.961954] postgres[2394]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 231.962631] postgres[2394]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 231.963236] postgres[2394]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 231.963531] postgres[2394]: 'format-version', '2', vm-test-run-wal2json> server # [ 231.964021] postgres[2394]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 231.965271] postgres[2394]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 231.966140] postgres[2394]: ) x; vm-test-run-wal2json> server # [ 231.966789] postgres[2394]: [2394] LOG: logical decoding found consistent point at 0/8034EC8 vm-test-run-wal2json> server # [ 231.967266] postgres[2394]: [2394] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 231.967570] postgres[2394]: [2394] STATEMENT: select vm-test-run-wal2json> server # [ 231.969350] postgres[2394]: data vm-test-run-wal2json> server # [ 231.969740] postgres[2394]: from vm-test-run-wal2json> server # [ 231.969976] postgres[2394]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 231.970602] postgres[2394]: 'reg_test', vm-test-run-wal2json> server # [ 231.970869] postgres[2394]: null, vm-test-run-wal2json> server # [ 231.971104] postgres[2394]: null, vm-test-run-wal2json> server # [ 231.971332] postgres[2394]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 231.971563] postgres[2394]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 231.971790] postgres[2394]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 231.972838] postgres[2394]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 231.973379] postgres[2394]: 'format-version', '2', vm-test-run-wal2json> server # [ 231.974424] postgres[2394]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 231.974934] postgres[2394]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 231.975224] postgres[2394]: ) x; vm-test-run-wal2json> server # [ 232.200962] sudo[2387]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.28 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 499 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after extension upgrade, in 1.28 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.32 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.33 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.31 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 0.95 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 233.544755] sudo[2409]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 233.687077] sudo[2409]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 234.107352] postgres[2416]: [2416] LOG: logical decoding found consistent point at 0/803B4F0 vm-test-run-wal2json> server # [ 234.108749] postgres[2416]: [2416] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 234.111347] postgres[2416]: [2416] STATEMENT: select vm-test-run-wal2json> server # [ 234.112869] postgres[2416]: 1 vm-test-run-wal2json> server # [ 234.113676] postgres[2416]: from vm-test-run-wal2json> server # [ 234.113983] postgres[2416]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 234.143441] postgres[2416]: [2416] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 234.145532] postgres[2416]: [2416] DETAIL: Streaming transactions committing after 0/803B528, reading WAL from 0/803B4F0. vm-test-run-wal2json> server # [ 234.146586] postgres[2416]: [2416] STATEMENT: select vm-test-run-wal2json> server # [ 234.147326] postgres[2416]: data vm-test-run-wal2json> server # [ 234.148844] postgres[2416]: from vm-test-run-wal2json> server # [ 234.149303] postgres[2416]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 234.149703] postgres[2416]: 'reg_test', vm-test-run-wal2json> server # [ 234.149976] postgres[2416]: null, vm-test-run-wal2json> server # [ 234.150429] postgres[2416]: null, vm-test-run-wal2json> server # [ 234.150914] postgres[2416]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 234.151203] postgres[2416]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 234.152051] postgres[2416]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 234.153802] postgres[2416]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 234.154844] postgres[2416]: 'format-version', '2', vm-test-run-wal2json> server # [ 234.155320] postgres[2416]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 234.155707] postgres[2416]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 234.155992] postgres[2416]: ) x; vm-test-run-wal2json> server # [ 234.156368] postgres[2416]: [2416] LOG: logical decoding found consistent point at 0/803B4F0 vm-test-run-wal2json> server # [ 234.156650] postgres[2416]: [2416] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 234.156894] postgres[2416]: [2416] STATEMENT: select vm-test-run-wal2json> server # [ 234.157489] postgres[2416]: data vm-test-run-wal2json> server # [ 234.158126] postgres[2416]: from vm-test-run-wal2json> server # [ 234.158403] postgres[2416]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 234.158666] postgres[2416]: 'reg_test', vm-test-run-wal2json> server # [ 234.159067] postgres[2416]: null, vm-test-run-wal2json> server # [ 234.159301] postgres[2416]: null, vm-test-run-wal2json> server # [ 234.159656] postgres[2416]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 234.159984] postgres[2416]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 234.161494] postgres[2416]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 234.162179] postgres[2416]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 234.163617] postgres[2416]: 'format-version', '2', vm-test-run-wal2json> server # [ 234.164640] postgres[2416]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 234.165464] postgres[2416]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 234.165792] postgres[2416]: ) x; vm-test-run-wal2json> server # [ 234.387432] sudo[2409]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.24 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 446 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after installing the last version, in 1.24 seconds) vm-test-run-wal2json> subtest: switch to orioledb 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 240.271435] nixos[2423]: switching to system configuration /nix/store/dl6wyy7czm28nb9xs2ihjkf61lrf9vgq-nixos-system-server-test vm-test-run-wal2json> server # [ 240.286923] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 240.294171] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 240.299574] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 240.302998] postgres[2345]: [2345] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 240.303776] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 240.313312] postgres[2345]: [2345] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 240.388938] postgres[2345]: [2345] LOG: background worker "logical replication launcher" (PID 2354) exited with exit code 1 vm-test-run-wal2json> server # [ 240.402505] postgres[2349]: [2349] LOG: shutting down vm-test-run-wal2json> server # [ 240.405812] postgres[2349]: [2349] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 240.418868] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 240.445379] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 240.554243] postgres[2349]: [2349] LOG: checkpoint complete: wrote 57 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.047 s, sync=0.050 s, total=0.167 s; sync files=45, longest=0.011 s, average=0.002 s; distance=241 kB, estimate=241 kB; lsn=0/803C5C8, redo lsn=0/803C5C8 vm-test-run-wal2json> server # [ 240.593670] postgres[2345]: [2345] LOG: database system is shut down vm-test-run-wal2json> server # [ 240.649825] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 240.657054] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 240.661827] systemd[1]: postgresql.service: Consumed 2.096s CPU time, 22.3M memory peak, 264K written to disk. vm-test-run-wal2json> server # [ 240.690888] systemd[1]: postgresql-migrate.service: Deactivated successfully. vm-test-run-wal2json> server # [ 240.699512] systemd[1]: Stopped postgresql-migrate.service. vm-test-run-wal2json> server # [ 240.705265] systemd[1]: postgresql-migrate.service: Consumed 32.785s CPU time, 94.2M memory peak, 173M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 244.835562] systemd[1]: Reload requested from client PID 2423 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 244.840967] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 250.653404] systemd[1]: Reloading finished in 5803 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 250.939902] systemd[1]: Stopped target Reactivate sysinit units. vm-test-run-wal2json> server # [ 250.944354] systemd[1]: Stopping Reactivate sysinit units... vm-test-run-wal2json> server # [ 250.947442] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 250.979830] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 251.225032] dbus-daemon[633]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 251.374960] dbus-daemon[633]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 251.395174] dbus-send[2499]: method return time=1794762472.842338 sender=org.freedesktop.DBus -> destination=:1.7 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 251.440280] dbus-daemon[633]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 251.603034] dbus-daemon[633]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 251.614580] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 251.727905] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 251.743791] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 251.752498] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 251.767402] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 251.863328] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 251.925149] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 251.955708] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 251.957778] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 251.958646] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 251.966700] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 251.975465] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 251.989562] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 252.644752] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 255.412812] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 255.418169] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 255.419793] systemd[1]: suid-sgid-wrappers.service: Consumed 1.634s CPU time, 3.4M memory peak. vm-test-run-wal2json> server # [ 255.460836] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 255.518171] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 255.520143] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 255.779851] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 255.789496] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 256.833328] postgresql-pre-start[2582]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 256.842532] postgresql-pre-start[2582]: This user must also own the server process. vm-test-run-wal2json> server # [ 256.902294] postgresql-pre-start[2582]: Using language tag "en-US" for ICU locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 256.903265] postgresql-pre-start[2582]: The database cluster will be initialized with this locale configuration: vm-test-run-wal2json> server # [ 256.903865] postgresql-pre-start[2582]: locale provider: icu vm-test-run-wal2json> server # [ 256.904895] postgresql-pre-start[2582]: default collation: en-US vm-test-run-wal2json> server # [ 256.905496] postgresql-pre-start[2582]: LC_COLLATE: en_US.UTF-8 vm-test-run-wal2json> server # [ 256.906176] postgresql-pre-start[2582]: LC_CTYPE: en_US.UTF-8 vm-test-run-wal2json> server # [ 256.906495] postgresql-pre-start[2582]: LC_MESSAGES: en_US.UTF-8 vm-test-run-wal2json> server # [ 256.906778] postgresql-pre-start[2582]: LC_MONETARY: en_US.UTF-8 vm-test-run-wal2json> server # [ 256.907042] postgresql-pre-start[2582]: LC_NUMERIC: en_US.UTF-8 vm-test-run-wal2json> server # [ 256.907316] postgresql-pre-start[2582]: LC_TIME: en_US.UTF-8 vm-test-run-wal2json> server # [ 256.907910] postgresql-pre-start[2582]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 256.909490] postgresql-pre-start[2582]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 256.910061] postgresql-pre-start[2582]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 256.914112] postgresql-pre-start[2582]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 256.916869] postgresql-pre-start[2582]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 257.486708] postgresql-pre-start[2582]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 257.874855] postgresql-pre-start[2582]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 265.703990] postgresql-pre-start[2582]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 265.725092] postgresql-pre-start[2582]: creating configuration files ... ok vm-test-run-wal2json> server # [ 267.748069] postgresql-pre-start[2582]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 272.829574] postgresql-pre-start[2582]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 274.206681] postgresql-pre-start[2582]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 274.209101] postgresql-pre-start[2582]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 274.210094] postgresql-pre-start[2582]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 274.211857] postgresql-pre-start[2582]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 274.212978] postgresql-pre-start[2582]: /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 275.275490] postgres[2595]: [2595] LOG: registered custom resource manager "OrioleDB resource manager" with ID 129 vm-test-run-wal2json> server # [ 275.615427] postgres[2595]: [2595] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 275.706174] postgres[2595]: [2595] LOG: listening on IPv6 address "::1", port 5432 vm-test-run-wal2json> server # [ 275.714142] postgres[2595]: [2595] LOG: listening on IPv4 address "127.0.0.1", port 5432 vm-test-run-wal2json> server # [ 275.723276] postgres[2595]: [2595] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 275.799197] postgres[2601]: [2601] LOG: Cleanup of old files at startup. Checkpoint 0 vm-test-run-wal2json> server # [ 275.802767] postgres[2601]: [2601] LOG: database system was shut down at 2026-11-15 17:08:14 GMT vm-test-run-wal2json> server # [ 275.817198] postgres[2602]: [2602] LOG: orioledb background writer 0 started vm-test-run-wal2json> server # [ 275.895634] postgres[2595]: [2595] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 275.921791] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 275.966158] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 276.983343] postgresql-setup-start[2609]: CREATE EXTENSION vm-test-run-wal2json> server # [ 277.397230] postgresql-setup-start[2615]: CREATE ROLE vm-test-run-wal2json> server # [ 277.552006] postgresql-setup-start[2617]: ALTER ROLE vm-test-run-wal2json> server # [ 277.611884] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 277.625085] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 277.910002] nixos[2423]: finished switching to system configuration /nix/store/dl6wyy7czm28nb9xs2ihjkf61lrf9vgq-nixos-system-server-test vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" , in 0.34 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.32 seconds) vm-test-run-wal2json> (finished: subtest: switch to orioledb 17, in 44.18 seconds) vm-test-run-wal2json> subtest: Check upgrade path with orioledb 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.33 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.35 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.30 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with orioledb 17, in 0.99 seconds) vm-test-run-wal2json> subtest: Check pg_regress with orioledb 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" vm-test-run-wal2json> server # [ 279.971168] sudo[2640]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 wal2json vm-test-run-wal2json> server # [ 280.091481] sudo[2640]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 280.574676] postgres[2647]: [2647] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 280.575663] postgres[2647]: [2647] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 280.577131] postgres[2647]: [2647] STATEMENT: select vm-test-run-wal2json> server # [ 280.577693] postgres[2647]: 1 vm-test-run-wal2json> server # [ 280.579283] postgres[2647]: from vm-test-run-wal2json> server # [ 280.579827] postgres[2647]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 280.612362] postgres[2647]: [2647] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 280.613823] postgres[2647]: [2647] DETAIL: Streaming transactions committing after 0/15908A0, reading WAL from 0/1590850. vm-test-run-wal2json> server # [ 280.615000] postgres[2647]: [2647] STATEMENT: select vm-test-run-wal2json> server # [ 280.615412] postgres[2647]: data vm-test-run-wal2json> server # [ 280.616976] postgres[2647]: from vm-test-run-wal2json> server # [ 280.617641] postgres[2647]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 280.618292] postgres[2647]: 'reg_test', vm-test-run-wal2json> server # [ 280.618694] postgres[2647]: null, vm-test-run-wal2json> server # [ 280.619161] postgres[2647]: null, vm-test-run-wal2json> server # [ 280.619772] postgres[2647]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 280.620288] postgres[2647]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 280.621820] postgres[2647]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 280.622991] postgres[2647]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 280.623612] postgres[2647]: 'format-version', '2', vm-test-run-wal2json> server # [ 280.624165] postgres[2647]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 280.625455] postgres[2647]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 280.625907] postgres[2647]: ) x; vm-test-run-wal2json> server # [ 280.626621] postgres[2647]: [2647] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 280.627001] postgres[2647]: [2647] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 280.627503] postgres[2647]: [2647] STATEMENT: select vm-test-run-wal2json> server # [ 280.628999] postgres[2647]: data vm-test-run-wal2json> server # [ 280.629595] postgres[2647]: from vm-test-run-wal2json> server # [ 280.629958] postgres[2647]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 280.630236] postgres[2647]: 'reg_test', vm-test-run-wal2json> server # [ 280.630618] postgres[2647]: null, vm-test-run-wal2json> server # [ 280.630878] postgres[2647]: null, vm-test-run-wal2json> server # [ 280.631113] postgres[2647]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 280.631366] postgres[2647]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 280.631619] postgres[2647]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 280.631884] postgres[2647]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 280.632919] postgres[2647]: 'format-version', '2', vm-test-run-wal2json> server # [ 280.633415] postgres[2647]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 280.633715] postgres[2647]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 280.634064] postgres[2647]: ) x; vm-test-run-wal2json> server # [ 280.819866] sudo[2640]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/pfywh5j1s9jvp3gkxc1dpc1qpwkb3ib9-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" , in 1.25 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 486 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with orioledb 17 after installing the last version, in 1.25 seconds) vm-test-run-wal2json> (finished: run the VM test script, in 281.95 seconds) vm-test-run-wal2json> test script finished in 282.21s vm-test-run-wal2json> cleanup vm-test-run-wal2json> kill machine (pid 9) vm-test-run-wal2json> qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/a1mjjnpfivsx5gi4rxbcr54vl6gyjfzj-python3-3.13.11/bin/python3.13) vm-test-run-wal2json> vde_switch: EOF data port: Interrupted system call vm-test-run-wal2json> kill vlan (pid 7) vm-test-run-wal2json> (finished: cleanup, in 0.00 seconds) vm-test-run-wal2json> vde_switch: Caught signal 15, cleaning up and exiting