these 2 derivations will be built: /nix/store/2ryry3nddc0s1jnd0gppq0yxy7cpjby8-nixos-test-driver-wal2json.drv /nix/store/m629p7814xsgmgirjg4ysabs47prk9r6-vm-test-run-wal2json.drv building '/nix/store/2ryry3nddc0s1jnd0gppq0yxy7cpjby8-nixos-test-driver-wal2json.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/2ryry3nddc0s1jnd0gppq0yxy7cpjby8-nixos-test-driver-wal2json.drv' nixos-test-driver-wal2json> Running type check (enable/disable: config.skipTypeCheck) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck nixos-test-driver-wal2json> Success: no issues found in 1 source file nixos-test-driver-wal2json> additionally exposed symbols: nixos-test-driver-wal2json> , nixos-test-driver-wal2json> , nixos-test-driver-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug nixos-test-driver-wal2json> Linting test script (enable/disable: config.skipLint) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint building '/nix/store/m629p7814xsgmgirjg4ysabs47prk9r6-vm-test-run-wal2json.drv' on 'ssh-ng://builder@mac-linux-builder' building '/nix/store/m629p7814xsgmgirjg4ysabs47prk9r6-vm-test-run-wal2json.drv' vm-test-run-wal2json> Machine state will be reset. To keep it, pass --keep-vm-state vm-test-run-wal2json> start all VLans vm-test-run-wal2json> start vlan vm-test-run-wal2json> running vlan (pid 7; ctl /build/vde1.ctl) vm-test-run-wal2json> (finished: start all VLans, in 0.00 seconds) vm-test-run-wal2json> Test will time out and terminate in 3600 seconds vm-test-run-wal2json> run the VM test script vm-test-run-wal2json> additionally exposed symbols: vm-test-run-wal2json> server, vm-test-run-wal2json> vlan1, vm-test-run-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug vm-test-run-wal2json> Running tests for extension: wal2json vm-test-run-wal2json> start all VMs vm-test-run-wal2json> server: starting vm vm-test-run-wal2json> mke2fs 1.47.3 (8-Jul-2025) vm-test-run-wal2json> qemu-system-aarch64: Could not access KVM kernel module: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: failed to initialize kvm: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: falling back to tcg vm-test-run-wal2json> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-wal2json> server # Formatting '/build/vm-state-server/tmp.5JY2wdgIW3', fmt=raw size=1073741824 vm-test-run-wal2json> server # Discarding device blocks: 0/262144 done vm-test-run-wal2json> server # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-wal2json> server # Filesystem UUID: f44481f1-ae90-40d8-ac02-41e912c0572b vm-test-run-wal2json> server # Superblock backups stored on blocks: vm-test-run-wal2json> server # 32768, 98304, 163840, 229376 vm-test-run-wal2json> server # vm-test-run-wal2json> server # Allocating group tables: 0/8 done vm-test-run-wal2json> server # Writing inode tables: 0/8 done vm-test-run-wal2json> server # Creating journal (8192 blocks): done vm-test-run-wal2json> server # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-wal2json> server # vm-test-run-wal2json> server # Virtualisation disk image created. vm-test-run-wal2json> server: QEMU running (pid 9) vm-test-run-wal2json> (finished: start all VMs, in 0.13 seconds) vm-test-run-wal2json> server: waiting for unit multi-user.target vm-test-run-wal2json> server: waiting for the VM to finish booting vm-test-run-wal2json> server # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510] vm-test-run-wal2json> server # [ 0.000000] Linux version 6.12.63 (runner@ie-supabase-native-arm-5hdpw-2qtrh) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP Thu Dec 18 12:55:23 UTC 2025 vm-test-run-wal2json> server # [ 0.000000] KASLR enabled vm-test-run-wal2json> server # [ 0.000000] random: crng init done vm-test-run-wal2json> server # [ 0.000000] Machine model: linux,dummy-virt vm-test-run-wal2json> server # [ 0.000000] efi: UEFI not found. vm-test-run-wal2json> server # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT vm-test-run-wal2json> server # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] NODE_DATA(0) allocated [mem 0x13f602200-0x13f60593f] vm-test-run-wal2json> server # [ 0.000000] Zone ranges: vm-test-run-wal2json> server # [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] vm-test-run-wal2json> server # [ 0.000000] DMA32 empty vm-test-run-wal2json> server # [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Device empty vm-test-run-wal2json> server # [ 0.000000] Movable zone start for each node vm-test-run-wal2json> server # [ 0.000000] Early memory node ranges vm-test-run-wal2json> server # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 vm-test-run-wal2json> server # [ 0.000000] psci: probing for conduit method from DT. vm-test-run-wal2json> server # [ 0.000000] psci: PSCIv1.1 detected in firmware. vm-test-run-wal2json> server # [ 0.000000] psci: Using standard PSCI v0.2 function IDs vm-test-run-wal2json> server # [ 0.000000] psci: Trusted OS migration not required vm-test-run-wal2json> server # [ 0.000000] psci: SMC Calling Convention v1.0 vm-test-run-wal2json> server # [ 0.000000] percpu: Embedded 88 pages/cpu s180056 r65536 d114856 u360448 vm-test-run-wal2json> server # [ 0.000000] Detected PIPT I-cache on CPU0 vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: GIC system register CPU interface vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: HCRX_EL2 register vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: 52-bit Virtual Addressing (LPA2) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Spectre-v4 vm-test-run-wal2json> server # [ 0.000000] alternatives: applying boot alternatives vm-test-run-wal2json> server # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/ysi5nhf8xzivbqyxy1vf1mrfjm61r70l-nixos-system-server-test/init regInfo=/nix/store/45872w4wlgbnwcf6j12wmsn2qb6qgfnj-closure-info/registration console=ttyAMA0,115200n8 console=tty0 vm-test-run-wal2json> server # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/45872w4wlgbnwcf6j12wmsn2qb6qgfnj-closure-info/registration", will be passed to user space. vm-test-run-wal2json> server # [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Fallback order for Node 0: 0 vm-test-run-wal2json> server # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 vm-test-run-wal2json> server # [ 0.000000] Policy zone: Normal vm-test-run-wal2json> server # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-wal2json> server # [ 0.000000] software IO TLB: area num 2. vm-test-run-wal2json> server # [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) vm-test-run-wal2json> server # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-wal2json> server # [ 0.000000] allocated 8388608 bytes of page_ext vm-test-run-wal2json> server # [ 0.000000] ftrace: allocating 72257 entries in 283 pages vm-test-run-wal2json> server # [ 0.000000] ftrace: allocated 283 pages with 5 groups vm-test-run-wal2json> server # [ 0.000000] rcu: Hierarchical RCU implementation. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU event tracing is enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] Rude variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] Tracing variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. vm-test-run-wal2json> server # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 vm-test-run-wal2json> server # [ 0.000000] GICv3: 256 SPIs implemented vm-test-run-wal2json> server # [ 0.000000] GICv3: 0 Extended SPIs implemented vm-test-run-wal2json> server # [ 0.000000] Root IRQ handler: gic_handle_irq vm-test-run-wal2json> server # [ 0.000000] GICv3: GICv3 features: 16 PPIs vm-test-run-wal2json> server # [ 0.000000] GICv3: GICD_CTRL.DS=1, SCR_EL3.FIQ=0 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 vm-test-run-wal2json> server # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @100ad0000 (indirect, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @100ae0000 (flat, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] GICv3: using LPI property table @0x0000000100af0000 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100b00000 vm-test-run-wal2json> server # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-wal2json> server # [ 0.000000] arch_timer: cp15 timer(s) running at 1000.00MHz (virt). vm-test-run-wal2json> server # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-wal2json> server # [ 0.000040] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns vm-test-run-wal2json> server # [ 0.003024] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-wal2json> server # [ 0.013320] Console: colour dummy device 80x25 vm-test-run-wal2json> server # [ 0.014853] printk: legacy console [tty0] enabled vm-test-run-wal2json> server # [ 0.020936] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) vm-test-run-wal2json> server # [ 0.021355] pid_max: default: 32768 minimum: 301 vm-test-run-wal2json> server # [ 0.023599] LSM: initializing lsm=capability,landlock,yama,bpf vm-test-run-wal2json> server # [ 0.024916] landlock: Up and running. vm-test-run-wal2json> server # [ 0.024977] Yama: becoming mindful. vm-test-run-wal2json> server # [ 0.028659] LSM support for eBPF active vm-test-run-wal2json> server # [ 0.031704] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.031901] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.060851] cacheinfo: Unable to detect cache hierarchy for CPU 0 vm-test-run-wal2json> server # [ 0.072085] rcu: Hierarchical SRCU implementation. vm-test-run-wal2json> server # [ 0.072186] rcu: Max phase no-delay instances is 1000. vm-test-run-wal2json> server # [ 0.073602] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-wal2json> server # [ 0.081029] fsl-mc MSI: its@8080000 domain created vm-test-run-wal2json> server # [ 0.082716] EFI services will not be available. vm-test-run-wal2json> server # [ 0.084530] smp: Bringing up secondary CPUs ... vm-test-run-wal2json> server # [ 0.088736] Detected PIPT I-cache on CPU1 vm-test-run-wal2json> server # [ 0.089878] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000 vm-test-run-wal2json> server # [ 0.090505] GICv3: CPU1: using allocated LPI pending table @0x0000000100b10000 vm-test-run-wal2json> server # [ 0.092123] CPU1: Booted secondary processor 0x0000000001 [0x000f0510] vm-test-run-wal2json> server # [ 0.095765] smp: Brought up 1 node, 2 CPUs vm-test-run-wal2json> server # [ 0.095922] SMP: Total of 2 processors activated. vm-test-run-wal2json> server # [ 0.095966] CPU: All CPU(s) started at EL1 vm-test-run-wal2json> server # [ 0.096121] CPU features: detected: Branch Target Identification vm-test-run-wal2json> server # [ 0.096170] CPU features: detected: 32-bit EL0 Support vm-test-run-wal2json> server # [ 0.096197] CPU features: detected: 32-bit EL1 Support vm-test-run-wal2json> server # [ 0.096217] CPU features: detected: ARMv8.4 Translation Table Level vm-test-run-wal2json> server # [ 0.096245] CPU features: detected: Instruction cache invalidation not required for I/D coherence vm-test-run-wal2json> server # [ 0.096279] CPU features: detected: Data cache clean to the PoU not required for I/D coherence vm-test-run-wal2json> server # [ 0.096343] CPU features: detected: Common not Private translations vm-test-run-wal2json> server # [ 0.096370] CPU features: detected: CRC32 instructions vm-test-run-wal2json> server # [ 0.096391] CPU features: detected: Data cache clean to Point of Deep Persistence vm-test-run-wal2json> server # [ 0.096416] CPU features: detected: Data cache clean to Point of Persistence vm-test-run-wal2json> server # [ 0.096442] CPU features: detected: Data independent timing control (DIT) vm-test-run-wal2json> server # [ 0.096468] CPU features: detected: E0PD vm-test-run-wal2json> server # [ 0.096487] CPU features: detected: Enhanced Counter Virtualization vm-test-run-wal2json> server # [ 0.096511] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) vm-test-run-wal2json> server # [ 0.096537] CPU features: detected: Enhanced Privileged Access Never vm-test-run-wal2json> server # [ 0.096559] CPU features: detected: Enhanced Virtualization Traps vm-test-run-wal2json> server # [ 0.096586] CPU features: detected: Fine Grained Traps vm-test-run-wal2json> server # [ 0.096642] CPU features: detected: Generic authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.096730] CPU features: detected: RCpc load-acquire (LDAPR) vm-test-run-wal2json> server # [ 0.096779] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2) vm-test-run-wal2json> server # [ 0.096807] CPU features: detected: LSE atomic instructions vm-test-run-wal2json> server # [ 0.096832] CPU features: detected: Memory Copy and Memory Set instructions vm-test-run-wal2json> server # [ 0.096859] CPU features: detected: Privileged Access Never vm-test-run-wal2json> server # [ 0.096885] CPU features: detected: RAS Extension Support vm-test-run-wal2json> server # [ 0.096909] CPU features: detected: Random Number Generator vm-test-run-wal2json> server # [ 0.096932] CPU features: detected: Speculation barrier (SB) vm-test-run-wal2json> server # [ 0.096954] CPU features: detected: Stage-2 Force Write-Back vm-test-run-wal2json> server # [ 0.096979] CPU features: detected: Trap EL0 IMPLEMENTATION DEFINED functionality vm-test-run-wal2json> server # [ 0.097006] CPU features: detected: TLB range maintenance instructions vm-test-run-wal2json> server # [ 0.097027] CPU features: detected: WFx with timeout vm-test-run-wal2json> server # [ 0.097068] CPU features: detected: Speculative Store Bypassing Safe (SSBS) vm-test-run-wal2json> server # [ 0.097094] CPU features: detected: Scalable Vector Extension vm-test-run-wal2json> server # [ 0.102707] alternatives: applying system-wide alternatives vm-test-run-wal2json> server # [ 0.118995] CPU features: detected: Hardware dirty bit management on CPU0-1 vm-test-run-wal2json> server # [ 0.119699] SVE: maximum available vector length 256 bytes per vector vm-test-run-wal2json> server # [ 0.119783] SVE: default vector length 64 bytes per vector vm-test-run-wal2json> server # [ 0.133603] Memory: 3922932K/4194304K available (23296K kernel code, 6546K rwdata, 24596K rodata, 4416K init, 1047K bss, 223164K reserved, 32768K cma-reserved) vm-test-run-wal2json> server # [ 0.153991] devtmpfs: initialized vm-test-run-wal2json> server # [ 0.181068] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns vm-test-run-wal2json> server # [ 0.181602] futex hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.184122] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL vm-test-run-wal2json> server # [ 0.184201] 0 pages in range for non-PLT usage vm-test-run-wal2json> server # [ 0.184240] 509248 pages in range for PLT usage vm-test-run-wal2json> server # [ 0.186976] pinctrl core: initialized pinctrl subsystem vm-test-run-wal2json> server # [ 0.197788] DMI not present or invalid. vm-test-run-wal2json> server # [ 0.218310] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-wal2json> server # [ 0.230685] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations vm-test-run-wal2json> server # [ 0.232002] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-wal2json> server # [ 0.233212] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-wal2json> server # [ 0.233483] audit: initializing netlink subsys (disabled) vm-test-run-wal2json> server # [ 0.235483] audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1 vm-test-run-wal2json> server # [ 0.241734] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-wal2json> server # [ 0.241791] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-wal2json> server # [ 0.241857] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-wal2json> server # [ 0.241890] thermal_sys: Registered thermal governor 'user_space' vm-test-run-wal2json> server # [ 0.241921] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-wal2json> server # [ 0.242594] cpuidle: using governor ladder vm-test-run-wal2json> server # [ 0.242867] cpuidle: using governor menu vm-test-run-wal2json> server # [ 0.245008] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. vm-test-run-wal2json> server # [ 0.246354] ASID allocator initialised with 65536 entries vm-test-run-wal2json> server # [ 0.254041] Serial: AMBA PL011 UART driver vm-test-run-wal2json> server # [ 0.301661] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 vm-test-run-wal2json> server # [ 0.303721] printk: legacy console [ttyAMA0] enabled vm-test-run-wal2json> server # [ 0.333362] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.333698] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-wal2json> server # [ 0.333818] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.333921] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page vm-test-run-wal2json> server # [ 0.334380] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.334488] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-wal2json> server # [ 0.334582] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.334675] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page vm-test-run-wal2json> server # [ 0.347174] fbcon: Taking over console vm-test-run-wal2json> server # [ 0.348264] ACPI: Interpreter disabled. vm-test-run-wal2json> server # [ 0.355042] iommu: Default domain type: Translated vm-test-run-wal2json> server # [ 0.355309] iommu: DMA domain TLB invalidation policy: strict mode vm-test-run-wal2json> server # [ 0.362831] SCSI subsystem initialized vm-test-run-wal2json> server # [ 0.365211] usbcore: registered new interface driver usbfs vm-test-run-wal2json> server # [ 0.366080] usbcore: registered new interface driver hub vm-test-run-wal2json> server # [ 0.366388] usbcore: registered new device driver usb vm-test-run-wal2json> server # [ 0.369536] pps_core: LinuxPPS API ver. 1 registered vm-test-run-wal2json> server # [ 0.369756] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti vm-test-run-wal2json> server # [ 0.370239] PTP clock support registered vm-test-run-wal2json> server # [ 0.371571] EDAC MC: Ver: 3.0.0 vm-test-run-wal2json> server # [ 0.373364] scmi_core: SCMI protocol bus registered vm-test-run-wal2json> server # [ 0.376799] FPGA manager framework vm-test-run-wal2json> server # [ 0.378163] Advanced Linux Sound Architecture Driver Initialized. vm-test-run-wal2json> server # [ 0.386658] vgaarb: loaded vm-test-run-wal2json> server # [ 0.390542] clocksource: Switched to clocksource arch_sys_counter vm-test-run-wal2json> server # [ 0.400077] VFS: Disk quotas dquot_6.6.0 vm-test-run-wal2json> server # [ 0.400308] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-wal2json> server # [ 0.402074] netfs: FS-Cache loaded vm-test-run-wal2json> server # [ 0.404543] pnp: PnP ACPI: disabled vm-test-run-wal2json> server # [ 0.427612] NET: Registered PF_INET protocol family vm-test-run-wal2json> server # [ 0.429253] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-wal2json> server # [ 0.537840] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.538185] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.539544] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.540376] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) vm-test-run-wal2json> server # [ 0.541056] TCP: Hash tables configured (established 32768 bind 32768) vm-test-run-wal2json> server # [ 0.542981] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear) vm-test-run-wal2json> server # [ 0.543567] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.544212] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.546158] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-wal2json> server # [ 0.547000] NET: Registered PF_XDP protocol family vm-test-run-wal2json> server # [ 0.547207] PCI: CLS 0 bytes, default 64 vm-test-run-wal2json> server # [ 0.549501] kvm [1]: HYP mode not available vm-test-run-wal2json> server # [ 0.551658] Trying to unpack rootfs image as initramfs... vm-test-run-wal2json> server # [ 0.651225] Initialise system trusted keyrings vm-test-run-wal2json> server # [ 0.652980] workingset: timestamp_bits=42 max_order=20 bucket_order=0 vm-test-run-wal2json> server # [ 0.657013] squashfs: version 4.0 (2009/01/31) Phillip Lougher vm-test-run-wal2json> server # [ 0.657694] 9p: Installing v9fs 9p2000 file system support vm-test-run-wal2json> server # [ 0.716677] Key type asymmetric registered vm-test-run-wal2json> server # [ 0.716955] Asymmetric key parser 'x509' registered vm-test-run-wal2json> server # [ 0.717435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) vm-test-run-wal2json> server # [ 0.718615] io scheduler mq-deadline registered vm-test-run-wal2json> server # [ 0.719655] io scheduler kyber registered vm-test-run-wal2json> server # [ 0.746234] pl061_gpio 9030000.pl061: PL061 GPIO chip registered vm-test-run-wal2json> server # [ 0.751567] ledtrig-cpu: registered to indicate activity on CPUs vm-test-run-wal2json> server # [ 0.754792] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: vm-test-run-wal2json> server # [ 0.755875] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 vm-test-run-wal2json> server # [ 0.756830] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 vm-test-run-wal2json> server # [ 0.757381] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 vm-test-run-wal2json> server # [ 0.758079] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits vm-test-run-wal2json> server # [ 0.759767] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] vm-test-run-wal2json> server # [ 0.761549] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 vm-test-run-wal2json> server # [ 0.761931] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-wal2json> server # [ 0.762316] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.763056] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.763346] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.764976] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.769251] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.769597] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.769817] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.769982] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.770164] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.771525] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.771710] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.771807] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.771917] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.772802] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.773210] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.773421] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.773541] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.774601] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.775287] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.775496] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.775633] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.776854] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.777409] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.777510] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.777641] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.779554] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.779753] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] vm-test-run-wal2json> server # [ 0.779862] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.779972] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.781096] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.781260] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.781361] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.781825] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.781932] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.783414] pci 0000:00:08.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.783753] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.784271] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.784730] pci 0000:00:09.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.784890] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.785003] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.785522] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.785665] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.786042] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.786243] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.786912] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.787139] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.788339] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.788499] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.788588] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.789017] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.792765] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned vm-test-run-wal2json> server # [ 0.793406] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned vm-test-run-wal2json> server # [ 0.793679] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.794200] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.794589] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.795231] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.795656] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.795976] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.796115] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.796241] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.796393] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.796531] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.797141] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.797587] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned vm-test-run-wal2json> server # [ 0.797715] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned vm-test-run-wal2json> server # [ 0.798436] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned vm-test-run-wal2json> server # [ 0.799207] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned vm-test-run-wal2json> server # [ 0.800566] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned vm-test-run-wal2json> server # [ 0.801181] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned vm-test-run-wal2json> server # [ 0.801520] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned vm-test-run-wal2json> server # [ 0.801893] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned vm-test-run-wal2json> server # [ 0.802094] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned vm-test-run-wal2json> server # [ 0.802253] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned vm-test-run-wal2json> server # [ 0.802569] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned vm-test-run-wal2json> server # [ 0.803524] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned vm-test-run-wal2json> server # [ 0.803956] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned vm-test-run-wal2json> server # [ 0.804330] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned vm-test-run-wal2json> server # [ 0.804434] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned vm-test-run-wal2json> server # [ 0.804537] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned vm-test-run-wal2json> server # [ 0.804634] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned vm-test-run-wal2json> server # [ 0.804728] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned vm-test-run-wal2json> server # [ 0.804829] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned vm-test-run-wal2json> server # [ 0.804924] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned vm-test-run-wal2json> server # [ 0.805022] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned vm-test-run-wal2json> server # [ 0.805313] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.805420] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.805517] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.807485] pci 0000:00:0a.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.866088] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.870355] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.872364] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.875046] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.877126] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.879521] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.880965] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.882540] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.884527] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.888171] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.889829] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.908071] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-wal2json> server # [ 0.918512] msm_serial: driver initialized vm-test-run-wal2json> server # [ 0.920319] SuperH (H)SCI(F) driver initialized vm-test-run-wal2json> server # [ 0.920761] STM32 USART driver initialized vm-test-run-wal2json> server # [ 0.968968] loop: module loaded vm-test-run-wal2json> server # [ 0.969621] virtio_blk virtio5: 2/0/0 default/read/poll queues vm-test-run-wal2json> server # [ 0.973845] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-wal2json> server # [ 0.986142] megasas: 07.727.03.00-rc1 vm-test-run-wal2json> server # [ 0.990842] Freeing initrd memory: 10684K vm-test-run-wal2json> server # [ 0.992368] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] vm-test-run-wal2json> server # [ 0.995219] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 0.996475] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 0.998150] Using buffer write method vm-test-run-wal2json> server # [ 0.998897] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] vm-test-run-wal2json> server # [ 1.000321] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.000869] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.002337] Using buffer write method vm-test-run-wal2json> server # [ 1.003251] Concatenating MTD devices: vm-test-run-wal2json> server # [ 1.003509] (0): "0.flash" vm-test-run-wal2json> server # [ 1.003581] (1): "0.flash" vm-test-run-wal2json> server # [ 1.003645] into device "0.flash" vm-test-run-wal2json> server # [ 1.027870] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-wal2json> server # [ 1.039851] thunder_xcv, ver 1.0 vm-test-run-wal2json> server # [ 1.040107] thunder_bgx, ver 1.0 vm-test-run-wal2json> server # [ 1.040276] nicpf, ver 1.0 vm-test-run-wal2json> server # [ 1.042741] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version vm-test-run-wal2json> server # [ 1.042877] hns3: Copyright (c) 2017 Huawei Corporation. vm-test-run-wal2json> server # [ 1.043862] hclge is initializing vm-test-run-wal2json> server # [ 1.044101] e1000: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.044193] e1000: Copyright (c) 1999-2006 Intel Corporation. vm-test-run-wal2json> server # [ 1.044430] e1000e: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.044516] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. vm-test-run-wal2json> server # [ 1.044699] igb: Intel(R) Gigabit Ethernet Network Driver vm-test-run-wal2json> server # [ 1.044782] igb: Copyright (c) 2007-2014 Intel Corporation. vm-test-run-wal2json> server # [ 1.044955] igbvf: Intel(R) Gigabit Virtual Function Network Driver vm-test-run-wal2json> server # [ 1.045048] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. vm-test-run-wal2json> server # [ 1.045686] sky2: driver version 1.30 vm-test-run-wal2json> server # [ 1.052930] ehci-pci 0000:00:0a.0: EHCI Host Controller vm-test-run-wal2json> server # [ 1.053387] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 vm-test-run-wal2json> server # [ 1.054678] usbcore: registered new interface driver usb-storage vm-test-run-wal2json> server # [ 1.055652] usbcore: registered new interface driver usbserial_generic vm-test-run-wal2json> server # [ 1.056123] usbserial: USB Serial support registered for generic vm-test-run-wal2json> server # [ 1.056464] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 vm-test-run-wal2json> server # [ 1.065475] rtc-pl031 9010000.pl031: registered as rtc0 vm-test-run-wal2json> server # [ 1.066155] rtc-pl031 9010000.pl031: setting system clock to 2026-11-13T16:48:44 UTC (1794588524) vm-test-run-wal2json> server # [ 1.067526] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 vm-test-run-wal2json> server # [ 1.068169] i2c_dev: i2c /dev entries driver vm-test-run-wal2json> server # [ 1.074369] hub 1-0:1.0: USB hub found vm-test-run-wal2json> server # [ 1.075667] hub 1-0:1.0: 6 ports detected vm-test-run-wal2json> server # [ 1.081509] sdhci: Secure Digital Host Controller Interface driver vm-test-run-wal2json> server # [ 1.081789] sdhci: Copyright(c) Pierre Ossman vm-test-run-wal2json> server # [ 1.084362] Synopsys Designware Multimedia Card Interface Driver vm-test-run-wal2json> server # [ 1.086022] sdhci-pltfm: SDHCI platform and OF driver helper vm-test-run-wal2json> server # [ 1.093184] hid: raw HID events driver (C) Jiri Kosina vm-test-run-wal2json> server # [ 1.095939] usbcore: registered new interface driver usbhid vm-test-run-wal2json> server # [ 1.096079] usbhid: USB HID core driver vm-test-run-wal2json> server # [ 1.104045] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available vm-test-run-wal2json> server # [ 1.118061] drop_monitor: Initializing network drop monitor service vm-test-run-wal2json> server # [ 1.119819] NET: Registered PF_INET6 protocol family vm-test-run-wal2json> server # [ 1.136320] Segment Routing with IPv6 vm-test-run-wal2json> server # [ 1.136661] In-situ OAM (IOAM) with IPv6 vm-test-run-wal2json> server # [ 1.137269] NET: Registered PF_PACKET protocol family vm-test-run-wal2json> server # [ 1.139189] 9pnet: Installing 9P2000 support vm-test-run-wal2json> server # [ 1.143863] Key type dns_resolver registered vm-test-run-wal2json> server # [ 1.178737] registered taskstats version 1 vm-test-run-wal2json> server # [ 1.181188] Loading compiled-in X.509 certificates vm-test-run-wal2json> server # [ 1.237398] Demotion targets for Node 0: null vm-test-run-wal2json> server # [ 1.240307] Key type .fscrypt registered vm-test-run-wal2json> server # [ 1.240460] Key type fscrypt-provisioning registered vm-test-run-wal2json> server # [ 1.249637] input: gpio-keys as /devices/platform/gpio-keys/input/input0 vm-test-run-wal2json> server # [ 1.295547] clk: Disabling unused clocks vm-test-run-wal2json> server # [ 1.295941] PM: genpd: Disabling unused power domains vm-test-run-wal2json> server # [ 1.296442] ALSA device list: vm-test-run-wal2json> server # [ 1.296618] No soundcards found. vm-test-run-wal2json> server # [ 1.378410] Freeing unused kernel memory: 4416K vm-test-run-wal2json> server # [ 1.380154] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-wal2json> server # [ 1.381664] Run /init as init process vm-test-run-wal2json> server # [ 1.570198] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 vm-test-run-wal2json> server # [ 1.704943] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 vm-test-run-wal2json> server # [ 1.832735] usb 1-2: new high-speed USB device number 3 using ehci-pci vm-test-run-wal2json> server # [ 1.966627] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev vm-test-run-wal2json> server # [ 2.013775] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 vm-test-run-wal2json> server # [ 2.016381] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 vm-test-run-wal2json> server # [ 2.104426] [drm] pci: virtio-gpu-pci detected at 0000:00:09.0 vm-test-run-wal2json> server # [ 2.105112] [drm] features: -virgl +edid -resource_blob -host_visible vm-test-run-wal2json> server # [ 2.105134] [drm] features: -context_init vm-test-run-wal2json> server # [ 2.108321] [drm] number of scanouts: 1 vm-test-run-wal2json> server # [ 2.108459] [drm] number of cap sets: 0 vm-test-run-wal2json> server # [ 2.118578] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:09.0 on minor 0 vm-test-run-wal2json> server # [ 2.154568] Console: switching to colour frame buffer device 160x50 vm-test-run-wal2json> server # [ 2.167426] virtio-pci 0000:00:09.0: [drm] fb0: virtio_gpudrmfb frame buffer device vm-test-run-wal2json> server # [ 4.953216] EXT4-fs (vda): mounted filesystem f44481f1-ae90-40d8-ac02-41e912c0572b r/w with ordered data mode. Quota mode: none. vm-test-run-wal2json> server # [ 7.383699] EXT4-fs (vda): re-mounted f44481f1-ae90-40d8-ac02-41e912c0572b. vm-test-run-wal2json> server # [ 7.404909] booting system configuration /nix/store/ysi5nhf8xzivbqyxy1vf1mrfjm61r70l-nixos-system-server-test vm-test-run-wal2json> server # [ 20.262180] systemd[1]: systemd 258.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) vm-test-run-wal2json> server # [ 20.273688] systemd[1]: Detected virtualization qemu. vm-test-run-wal2json> server # [ 20.278823] systemd[1]: Detected architecture arm64. vm-test-run-wal2json> server # [ 20.282901] systemd[1]: Detected first boot. vm-test-run-wal2json> server # [ 20.315688] systemd[1]: Initializing machine ID from random generator. vm-test-run-wal2json> server # [ 20.353819] systemd[1]: Hostname set to . vm-test-run-wal2json> server # [ 21.681195] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-wal2json> server # [ 23.349875] NET: Registered PF_VSOCK protocol family vm-test-run-wal2json> server # [ 23.400061] Guest personality initialized and is inactive vm-test-run-wal2json> server # [ 23.406037] VMCI host device registered (name=vmci, major=10, minor=261) vm-test-run-wal2json> server # [ 23.409770] Initialized host personality vm-test-run-wal2json> server # [ 23.673794] systemd[1]: Applying preset policy. vm-test-run-wal2json> server # [ 28.061023] systemd[1]: Populated /etc with preset unit settings. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 32.007626] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-wal2json> server # [ 32.236477] systemd[1]: Created slice Slice /system/getty. vm-test-run-wal2json> server # [ 32.251899] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-wal2json> server # [ 32.264599] systemd[1]: Created slice User and Session Slice. vm-test-run-wal2json> server # [ 32.272984] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-wal2json> server # [ 32.278426] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-wal2json> server # [ 32.284353] systemd[1]: Expecting device /dev/hvc0... vm-test-run-wal2json> server # [ 32.290014] systemd[1]: Expecting device /dev/ttyAMA0... vm-test-run-wal2json> server # [ 32.294513] systemd[1]: Expecting device /sys/subsystem/net/devices/eth1... vm-test-run-wal2json> server # [ 32.300101] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-wal2json> server # [ 32.304388] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-wal2json> server # [ 32.309366] systemd[1]: Reached target Path Units. vm-test-run-wal2json> server # [ 32.315027] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 32.320203] systemd[1]: Reached target Slice Units. vm-test-run-wal2json> server # [ 32.324448] systemd[1]: Reached target Swaps. vm-test-run-wal2json> server # [ 32.360718] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-wal2json> server # [ 32.387484] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-wal2json> server # [ 32.399262] systemd[1]: Listening on Journal Audit Socket. vm-test-run-wal2json> server # [ 32.404262] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-wal2json> server # [ 32.409732] systemd[1]: Listening on Journal Sockets. vm-test-run-wal2json> server # [ 32.418285] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-wal2json> server # [ 32.423828] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 32.429157] systemd[1]: Listening on udev Control Socket. vm-test-run-wal2json> server # [ 32.436386] systemd[1]: Listening on udev Kernel Socket. vm-test-run-wal2json> server # [ 32.485554] systemd[1]: Mounting Huge Pages File System... vm-test-run-wal2json> server # [ 32.525245] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-wal2json> server # [ 32.573330] systemd[1]: Mounting Kernel Debug File System... vm-test-run-wal2json> server # [ 32.617677] systemd[1]: Mounting Kernel Trace File System... vm-test-run-wal2json> server # [ 32.777956] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-wal2json> server # [ 32.909774] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-wal2json> server # [ 32.931910] systemd[1]: Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs). vm-test-run-wal2json> server # [ 33.057951] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-wal2json> server # [ 33.075901] systemd[1]: Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm). vm-test-run-wal2json> server # [ 33.088771] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 33.212611] systemd[1]: Starting Load Kernel Module fuse... vm-test-run-wal2json> server # [ 33.228132] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 33.234129] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 33.362170] systemd[1]: Starting Journal Service... vm-test-run-wal2json> server # [ 33.449163] systemd[1]: Starting Load Kernel Modules... vm-test-run-wal2json> server # [ 33.557925] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-wal2json> server # [ 33.652873] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-wal2json> server # [ 33.662027] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 33.709450] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-wal2json> server # [ 33.784987] systemd[1]: Mounted Huge Pages File System. vm-test-run-wal2json> server # [ 33.795070] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-wal2json> server # [ 33.796974] systemd[1]: Mounted Kernel Debug File System. vm-test-run-wal2json> server # [ 33.820169] systemd[1]: Mounted Kernel Trace File System. vm-test-run-wal2json> server # [ 33.841795] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-wal2json> server # [ 33.864398] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-wal2json> server # [ 33.944650] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-wal2json> server # [ 34.335490] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-wal2json> server # [ 34.345836] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-wal2json> server # [ 34.725302] fuse: init (API version 7.41) vm-test-run-wal2json> server # [ 34.787739] EXT4-fs (vda): re-mounted f44481f1-ae90-40d8-ac02-41e912c0572b. vm-test-run-wal2json> server # [ 34.799838] systemd[1]: Finished Load Kernel Modules. vm-test-run-wal2json> server # [ 34.837992] systemd[1]: modprobe@fuse.service: Deactivated successfully. vm-test-run-wal2json> server # [ 34.858857] systemd[1]: Finished Load Kernel Module fuse. vm-test-run-wal2json> server # [ 34.905716] systemd[1]: Mounting FUSE Control File System... vm-test-run-wal2json> server # [ 35.013388] systemd[1]: Starting Firewall... vm-test-run-wal2json> server # [ 35.088771] systemd[1]: Starting Apply Kernel Variables... vm-test-run-wal2json> server # [ 35.121689] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-wal2json> server # [ 35.137646] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 35.189969] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-wal2json> server # [ 35.200952] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 35.219819] systemd[1]: Mounted FUSE Control File System. vm-test-run-wal2json> server # [ 35.396900] systemd-journald[397]: Collecting audit messages is enabled. vm-test-run-wal2json> server # [ 36.316302] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-wal2json> server # [ 36.324667] systemd[1]: Reached target First Boot Complete. vm-test-run-wal2json> server # [ 36.536479] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-wal2json> server # [ 36.657248] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-wal2json> server # [ 36.692371] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-wal2json> server # [ 36.788961] systemd[1]: Finished Apply Kernel Variables. vm-test-run-wal2json> server # [ 37.720351] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-wal2json> server # [ 37.741750] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-wal2json> server # [ 37.790233] systemd[1]: Mounting /run/wrappers... vm-test-run-wal2json> server # [ 37.845980] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-wal2json> server # [ 38.173849] systemd[1]: Started Journal Service. vm-test-run-wal2json> server # [ 38.170770] systemd-modules-load[398]: Module 'atkbd' is built in vm-test-run-wal2json> server # [ 38.216261] systemd-modules-load[398]: Module 'loop' is built in vm-test-run-wal2json> server # [ 38.250634] systemd-oomd[399]: No swap; memory pressure usage will be degraded vm-test-run-wal2json> server # [ 38.260322] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-wal2json> server # [ 38.403786] systemd[1]: Mounted /run/wrappers. vm-test-run-wal2json> server # [ 38.633597] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 38.695102] systemd[1]: Listening on Boot Entries Service Socket. vm-test-run-wal2json> server # [ 38.732673] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 38.752093] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 38.807884] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-wal2json> server # [ 39.223268] systemd-journald[397]: Received client request to flush runtime journal. vm-test-run-wal2json> server # [ 39.847867] systemd-udevd[424]: Using default interface naming scheme 'v258'. vm-test-run-wal2json> server # [ 39.893643] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-wal2json> server # [ 39.915765] systemd[1]: Starting Create System Files and Directories... vm-test-run-wal2json> server # [ 39.949313] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-wal2json> server # [ 40.022980] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-wal2json> server # [ 42.202141] systemd[1]: Finished Create System Files and Directories. vm-test-run-wal2json> server # [ 42.271050] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-wal2json> server # [ 42.326513] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-wal2json> server # [ 42.613963] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-wal2json> server # [ 43.416697] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-wal2json> server # [ 44.725111] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-wal2json> server # [ 44.748603] systemd[1]: Starting Update is Completed... vm-test-run-wal2json> server # [ 45.648807] systemd[1]: Finished Update is Completed. vm-test-run-wal2json> server # [ 50.179578] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 50.195433] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 50.202966] systemd[1]: suid-sgid-wrappers.service: Consumed 3.174s CPU time, 5.6M memory peak. vm-test-run-wal2json> server # [ 52.894989] systemd[1]: Finished Firewall. vm-test-run-wal2json> server # [ 54.651449] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-wal2json> server # [ 54.665722] systemd[1]: Reached target System Initialization. vm-test-run-wal2json> server # [ 54.693224] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-wal2json> server # [ 54.698928] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-wal2json> server # [ 54.706382] systemd[1]: Reached target Timer Units. vm-test-run-wal2json> server # [ 54.711615] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-wal2json> server # [ 54.718975] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-wal2json> server # [ 54.721996] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-wal2json> server # [ 54.770190] systemd[1]: Starting OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK)... vm-test-run-wal2json> server # [ 54.780789] systemd[1]: Listening on Hostname Service Socket. vm-test-run-wal2json> server # [ 54.921091] (sh-issue)[631]: sshd-vsock.socket: Unable to locate executable '/usr/lib/systemd/systemd-ssh-issue': No such file or directory vm-test-run-wal2json> server # [ 54.949763] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK). vm-test-run-wal2json> server # [ 54.958211] systemd[1]: Reached target Socket Units. vm-test-run-wal2json> server # [ 54.959796] systemd[1]: Reached target Basic System. vm-test-run-wal2json> server # [ 55.005778] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-wal2json> server # [ 55.048181] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-wal2json> server # [ 55.108123] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 55.169263] systemd[1]: Started Reset console on configuration changes. vm-test-run-wal2json> server # [ 55.234163] systemd[1]: Starting resolvconf update... vm-test-run-wal2json> server # [ 55.307701] systemd[1]: Starting SSH Host Keys Generation... vm-test-run-wal2json> server # [ 56.563528] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-wal2json> server # [ 56.841516] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 56.846416] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 56.902814] dbus-daemon[633]: dbus[633]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 56.930095] nsncd[635]: Nov 13 16:49:40.290 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 56.943702] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 56.963928] systemd[1]: Starting User Login Management... vm-test-run-wal2json> server # [ 57.593814] systemd[1]: Started D-Bus System Message Bus. vm-test-run-wal2json> server # [ 58.720741] systemd-logind[660]: New seat seat0. vm-test-run-wal2json> server # [ 58.744190] systemd[1]: Started User Login Management. vm-test-run-wal2json> server # [ 58.793863] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 59.234295] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 59.236030] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-wal2json> server # [ 59.243840] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-wal2json> server # [ 59.258479] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-wal2json> server # [ 59.293236] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 59.338372] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-wal2json> server # [ 59.363446] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 59.453455] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 59.461844] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 59.568761] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 60.549231] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 60.558934] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 60.590005] nsncd[709]: Nov 13 16:49:44.044 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 60.598715] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 60.606162] systemd[1]: Finished resolvconf update. vm-test-run-wal2json> server # [ 60.621851] systemd[1]: Reached target Preparation for Network. vm-test-run-wal2json> server # [ 60.682610] systemd[1]: Starting DHCP Client... vm-test-run-wal2json> server # [ 60.789278] sshd-keygen-start[657]: Generating public/private rsa key pair. vm-test-run-wal2json> server # [ 60.798576] sshd-keygen-start[657]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key vm-test-run-wal2json> server # [ 60.805961] sshd-keygen-start[657]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub vm-test-run-wal2json> server # [ 60.813307] sshd-keygen-start[657]: The key fingerprint is: vm-test-run-wal2json> server # [ 60.814456] sshd-keygen-start[657]: SHA256:nDSV+Pcgd8yte4/7yMkQ4f4XU4gwoZvgvYGY9jUwZfk root@server vm-test-run-wal2json> server # [ 60.816973] sshd-keygen-start[657]: The key's randomart image is: vm-test-run-wal2json> server # [ 60.822481] sshd-keygen-start[657]: +---[RSA 4096]----+ vm-test-run-wal2json> server # [ 60.825178] sshd-keygen-start[657]: | oooo | vm-test-run-wal2json> server # [ 60.830982] sshd-keygen-start[657]: | ooo+ | vm-test-run-wal2json> server # [ 60.833671] sshd-keygen-start[657]: | + +o o.+ o | vm-test-run-wal2json> server # [ 60.835128] sshd-keygen-start[657]: | + O =E.=.= o| vm-test-run-wal2json> server # [ 60.838306] sshd-keygen-start[657]: | + o S +o+ ..| vm-test-run-wal2json> server # [ 60.840090] sshd-keygen-start[657]: | . . . + . .oo | vm-test-run-wal2json> server # [ 60.842881] sshd-keygen-start[657]: | . . o .o| vm-test-run-wal2json> server # [ 60.846761] sshd-keygen-start[657]: | =.+o| vm-test-run-wal2json> server # [ 60.847998] sshd-keygen-start[657]: | O=+| vm-test-run-wal2json> server # [ 60.850327] sshd-keygen-start[657]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 61.485669] sshd-keygen-start[750]: Generating public/private ed25519 key pair. vm-test-run-wal2json> server # [ 61.489650] sshd-keygen-start[750]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key vm-test-run-wal2json> server # [ 61.498706] sshd-keygen-start[750]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub vm-test-run-wal2json> server # [ 61.502381] sshd-keygen-start[750]: The key fingerprint is: vm-test-run-wal2json> server # [ 61.517867] sshd-keygen-start[750]: SHA256:g0tyd+5Kqj8ure6ah7BcWB6gAiLIIXuu56RaurHgIto root@server vm-test-run-wal2json> server # [ 61.521173] sshd-keygen-start[750]: The key's randomart image is: vm-test-run-wal2json> server # [ 61.526631] sshd-keygen-start[750]: +--[ED25519 256]--+ vm-test-run-wal2json> server # [ 61.534248] sshd-keygen-start[750]: |+.. | vm-test-run-wal2json> server # [ 61.541928] sshd-keygen-start[750]: |*+ | vm-test-run-wal2json> server # [ 61.543358] sshd-keygen-start[750]: |* o | vm-test-run-wal2json> server # [ 61.549931] sshd-keygen-start[750]: |oo o . | vm-test-run-wal2json> server # [ 61.554285] sshd-keygen-start[750]: |. = o + S . | vm-test-run-wal2json> server # [ 61.562141] sshd-keygen-start[750]: |.o o + o + | vm-test-run-wal2json> server # [ 61.565954] sshd-keygen-start[750]: |=o=. .. . . | vm-test-run-wal2json> server # [ 61.567102] sshd-keygen-start[750]: |*%..o oo . | vm-test-run-wal2json> server # [ 61.568279] sshd-keygen-start[750]: |%oE==*+.... | vm-test-run-wal2json> server # [ 61.570191] sshd-keygen-start[750]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 61.581258] systemd[1]: sshd-keygen.service: Deactivated successfully. vm-test-run-wal2json> server # [ 61.583757] systemd[1]: Finished SSH Host Keys Generation. vm-test-run-wal2json> server # [ 61.590805] systemd[1]: sshd-keygen.service: Consumed 2.116s CPU time, 2.9M memory peak. vm-test-run-wal2json> server # [ 62.736681] dhcpcd[755]: dhcpcd-10.2.4 starting vm-test-run-wal2json> server # [ 62.834473] dhcpcd[779]: dev: loaded udev vm-test-run-wal2json> server # [ 63.605241] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-wal2json> server # [ 64.026534] systemd[1]: Found device /dev/hvc0.[ 64.085919] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-wal2json> server # vm-test-run-wal2json> server # [ 64.380169] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-wal2json> server # [ 64.389661] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-wal2json> server # [ 64.410462] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 vm-test-run-wal2json> server # [ 64.414184] cfg80211: failed to load regulatory.db vm-test-run-wal2json> server # [ 65.096833] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-wal2json> server # [ 65.050482] dhcpcd[779]: eth0: waiting for carrier vm-test-run-wal2json> server # [ 65.078632] dhcpcd[779]: eth0: carrier acquired vm-test-run-wal2json> server # [ 65.263739] dhcpcd[779]: DUID 00:01:00:01:32:89:fc:2c:52:54:00:12:34:56 vm-test-run-wal2json> server # [ 65.270494] dhcpcd[779]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 65.277583] dhcpcd[779]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-wal2json> server # [ 66.079255] systemd[1]: Found device /dev/ttyAMA0. vm-test-run-wal2json> server # [ 66.115161] systemd[1]: Started backdoor.service. vm-test-run-wal2json> server # [ 66.187955] (udev-worker)[804]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 66.705666] dhcpcd[779]: eth0: soliciting a DHCP lease vm-test-run-wal2json> server # [ 66.740964] dhcpcd[779]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-wal2json> server # [ 66.765763] dhcpcd[779]: eth0: probing address 10.0.2.15/24 vm-test-run-wal2json> server # [ 66.790291] (udev-worker)[812]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-wal2json> server # [ 66.809524] (udev-worker)[812]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # connecting to host... vm-test-run-wal2json> server # [ 67.025927] dhcpcd[779]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 67.046899] dhcpcd[779]: eth0: Router Advertisement from fe80::2 vm-test-run-wal2json> server # [ 67.062145] dhcpcd[779]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-wal2json> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-wal2json> server: connected to guest root shell vm-test-run-wal2json> server: (connecting took 68.02 seconds) vm-test-run-wal2json> server: (finished: waiting for the VM to finish booting, in 68.02 seconds) vm-test-run-wal2json> server # [ 67.071529] dhcpcd[779]: eth0: adding route to fec0::/64 vm-test-run-wal2json> server # [ 67.086172] dhcpcd[779]: eth0: adding default route via fe80::2 vm-test-run-wal2json> server # [ 67.688607] dhcpcd[779]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 67.759677] dhcpcd[779]: eth0: soliciting a DHCP lease vm-test-run-wal2json> server # [ 67.762949] dhcpcd[779]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-wal2json> server # [ 67.763775] dhcpcd[779]: eth0: probing address 10.0.2.15/24 vm-test-run-wal2json> server # [ 68.242953] systemd[1]: Found device Virtio network device. vm-test-run-wal2json> server # [ 68.308265] dhcpcd[779]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 68.313768] systemd[1]: Starting Address configuration of eth1... vm-test-run-wal2json> server # [ 69.192851] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-wal2json> server # [ 69.357509] network-addresses-eth1-start[829]: adding address 192.168.1.1/24... done vm-test-run-wal2json> server # [ 69.525676] network-addresses-eth1-start[829]: adding address 2001:db8:1::1/64... done vm-test-run-wal2json> server # [ 69.743716] systemd[1]: Finished Address configuration of eth1. vm-test-run-wal2json> server # [ 69.797667] systemd[1]: Starting Networking Setup... vm-test-run-wal2json> server # [ 72.294004] systemd[1]: Finished Networking Setup. vm-test-run-wal2json> server # [ 72.312930] systemd[1]: Reached target Network. vm-test-run-wal2json> server # [ 72.349320] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 72.389756] systemd[1]: Starting SSH Daemon... vm-test-run-wal2json> server # [ 72.439942] systemd[1]: Starting Permit User Sessions... vm-test-run-wal2json> server # [ 72.976522] dhcpcd[779]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 72.998463] dhcpcd[779]: eth0: adding route to 10.0.2.0/24 vm-test-run-wal2json> server # [ 73.006287] dhcpcd[779]: eth0: adding default route via 10.0.2.2 vm-test-run-wal2json> server # [ 73.125625] systemd[1]: Finished Permit User Sessions. vm-test-run-wal2json> server # [ 73.208804] systemd[1]: Started Getty on tty1. vm-test-run-wal2json> server # [ 73.212007] systemd[1]: Reached target Login Prompts. vm-test-run-wal2json> server # [ 73.387261] sshd[919]: Server listening on 0.0.0.0 port 22. vm-test-run-wal2json> server # [ 73.405453] sshd[919]: Server listening on :: port 22. vm-test-run-wal2json> server # [ 73.431326] systemd[1]: Started SSH Daemon. vm-test-run-wal2json> server # [ 76.803815] postgresql-pre-start[949]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 76.831763] postgresql-pre-start[949]: This user must also own the server process. vm-test-run-wal2json> server # [ 76.874728] systemd[1]: Started DHCP Client. vm-test-run-wal2json> server # [ 77.013667] postgresql-pre-start[949]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 77.023304] postgresql-pre-start[949]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 77.024166] postgresql-pre-start[949]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 77.029540] postgresql-pre-start[949]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 77.031595] postgresql-pre-start[949]: fixing permissions on existing directory /var/lib/postgresql/15 ... ok vm-test-run-wal2json> server # [ 77.097618] postgresql-pre-start[949]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 77.131780] postgresql-pre-start[949]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 78.339493] postgresql-pre-start[949]: selecting default max_connections ... 100 vm-test-run-wal2json> server # [ 79.093013] postgresql-pre-start[949]: selecting default shared_buffers ... 128MB vm-test-run-wal2json> server # [ 81.588377] systemd-logind[660]: Watching system buttons on /dev/input/event0 (gpio-keys) vm-test-run-wal2json> server # [ 90.953403] mousedev: PS/2 mouse device common for all mice vm-test-run-wal2json> server # [ 95.491174] systemd-logind[660]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) vm-test-run-wal2json> server # [ 99.237533] postgresql-pre-start[949]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 99.263214] postgresql-pre-start[949]: creating configuration files ... ok vm-test-run-wal2json> server # [ 104.231407] postgresql-pre-start[949]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 116.775465] postgresql-pre-start[949]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 119.511697] postgresql-pre-start[949]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 119.514323] postgresql-pre-start[949]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 119.515693] postgresql-pre-start[949]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 119.518070] postgresql-pre-start[949]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 119.519913] postgresql-pre-start[949]: /nix/store/pf1liz03598zh3ymn2g8g5q3p68manb8-postgresql-15-wal2json/bin/pg_ctl -D /var/lib/postgresql/15 -l logfile start vm-test-run-wal2json> server # [ 121.558509] postgres[1424]: [1424] LOG: starting PostgreSQL 15.19 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 121.563841] postgres[1424]: [1424] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 121.567155] postgres[1424]: [1424] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 121.582126] postgres[1424]: [1424] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 121.697189] postgres[1435]: [1435] LOG: database system was shut down at 2026-11-13 16:50:40 GMT vm-test-run-wal2json> server # [ 121.940118] postgres[1424]: [1424] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 121.995344] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 122.055636] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 124.351866] postgresql-setup-start[1475]: CREATE ROLE vm-test-run-wal2json> server # [ 124.620011] postgresql-setup-start[1477]: ALTER ROLE vm-test-run-wal2json> server # [ 124.694592] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 124.703449] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 124.706267] systemd[1]: Reached target Multi-User System. vm-test-run-wal2json> server # [ 124.708818] systemd[1]: Startup finished in 19.378s (kernel) + 1min 45.318s (userspace) = 2min 4.697s. vm-test-run-wal2json> server: (finished: waiting for unit multi-user.target, in 127.04 seconds) vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 1.14 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.50 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 15 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.53 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.89 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.54 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 15, in 1.96 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 15 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/pf1liz03598zh3ymn2g8g5q3p68manb8-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" vm-test-run-wal2json> server # [ 130.505997] sudo[1544]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/pf1liz03598zh3ymn2g8g5q3p68manb8-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 wal2json vm-test-run-wal2json> server # [ 130.697315] sudo[1544]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # pg_regress: could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 131.611554] postgres[1555]: [1555] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 131.618517] postgres[1555]: [1555] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 131.624007] postgres[1555]: [1555] STATEMENT: select vm-test-run-wal2json> server # [ 131.634493] postgres[1555]: 1 vm-test-run-wal2json> server # [ 131.638227] postgres[1555]: from vm-test-run-wal2json> server # [ 131.641687] postgres[1555]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 131.768728] postgres[1555]: [1555] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 131.770414] postgres[1555]: [1555] DETAIL: Streaming transactions committing after 0/152AC80, reading WAL from 0/152AC48. vm-test-run-wal2json> server # [ 131.772025] postgres[1555]: [1555] STATEMENT: select vm-test-run-wal2json> server # [ 131.778509] postgres[1555]: data vm-test-run-wal2json> server # [ 131.779361] postgres[1555]: from vm-test-run-wal2json> server # [ 131.779821] postgres[1555]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 131.790297] postgres[1555]: 'reg_test', vm-test-run-wal2json> server # [ 131.801443] postgres[1555]: null, vm-test-run-wal2json> server # [ 131.802716] postgres[1555]: null, vm-test-run-wal2json> server # [ 131.809730] postgres[1555]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 131.812129] postgres[1555]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 131.819377] postgres[1555]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 131.829048] postgres[1555]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 131.829912] postgres[1555]: 'format-version', '2', vm-test-run-wal2json> server # [ 131.830774] postgres[1555]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 131.831451] postgres[1555]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 131.837900] postgres[1555]: ) x; vm-test-run-wal2json> server # [ 131.847086] postgres[1555]: [1555] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 131.852911] postgres[1555]: [1555] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 131.856849] postgres[1555]: [1555] STATEMENT: select vm-test-run-wal2json> server # [ 131.858446] postgres[1555]: data vm-test-run-wal2json> server # [ 131.868562] postgres[1555]: from vm-test-run-wal2json> server # [ 131.869370] postgres[1555]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 131.869987] postgres[1555]: 'reg_test', vm-test-run-wal2json> server # [ 131.871285] postgres[1555]: null, vm-test-run-wal2json> server # [ 131.871850] postgres[1555]: null, vm-test-run-wal2json> server # [ 131.876826] postgres[1555]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 131.878283] postgres[1555]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 131.878687] postgres[1555]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 131.879315] postgres[1555]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 131.879589] postgres[1555]: 'format-version', '2', vm-test-run-wal2json> server # [ 131.879892] postgres[1555]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 131.882070] postgres[1555]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 131.886091] postgres[1555]: ) x; vm-test-run-wal2json> server # [ 132.284542] sudo[1544]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/pf1liz03598zh3ymn2g8g5q3p68manb8-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" , in 2.63 seconds) vm-test-run-wal2json> (using postmaster on Unix socket, default port) vm-test-run-wal2json> ============== running regression test queries ============== vm-test-run-wal2json> test wal2json ... ok 1203 ms vm-test-run-wal2json> vm-test-run-wal2json> ===================== vm-test-run-wal2json> All 1 tests passed. vm-test-run-wal2json> ===================== vm-test-run-wal2json> vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 15 after extension upgrade, in 2.63 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.47 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.53 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.45 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.45 seconds) vm-test-run-wal2json> subtest: switch to postgresql 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 142.824911] nixos[1591]: switching to system configuration /nix/store/hmz9j57b9fyim34b3j0py7pdygx96kkw-nixos-system-server-test vm-test-run-wal2json> server # [ 142.855660] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 142.872113] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 142.886698] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 142.898858] postgres[1424]: [1424] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 142.913564] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 142.921987] postgres[1424]: [1424] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 142.923336] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 142.999302] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 143.053237] postgres[1424]: [1424] LOG: background worker "logical replication launcher" (PID 1443) exited with exit code 1 vm-test-run-wal2json> server # [ 143.091552] postgres[1433]: [1433] LOG: shutting down vm-test-run-wal2json> server # [ 143.092593] postgres[1433]: [1433] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 143.362873] postgres[1433]: [1433] LOG: checkpoint complete: wrote 54 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.101 s, sync=0.106 s, total=0.298 s; sync files=48, longest=0.028 s, average=0.003 s; distance=149 kB, estimate=149 kB vm-test-run-wal2json> server # [ 143.505242] postgres[1424]: [1424] LOG: database system is shut down vm-test-run-wal2json> server # [ 143.605418] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 143.622486] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 143.642277] systemd[1]: postgresql.service: Consumed 24.378s CPU time, 91.4M memory peak, 46.2M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 151.004022] systemd[1]: Reload requested from client PID 1591 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 151.025931] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 157.200085] systemd[1]: Reloading finished in 6179 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 157.647710] systemd[1]: Starting Re-setup tmpfiles on a system that is already running.... vm-test-run-wal2json> server # [ 159.179915] systemd[1]: Finished Re-setup tmpfiles on a system that is already running.. vm-test-run-wal2json> server # [ 159.198066] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 159.262301] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 159.861368] dbus-daemon[633]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 160.189776] dbus-daemon[633]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 160.202306] dbus-send[1789]: method return time=1794588683.689024 sender=org.freedesktop.DBus -> destination=:1.5 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 160.367262] dbus-daemon[633]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 160.723752] dbus-daemon[633]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 160.742943] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 160.823952] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 160.871034] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 160.926855] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 160.927961] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 160.936525] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 160.946306] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 160.947446] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 160.965499] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 160.966430] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 160.967321] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 161.274114] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 161.316912] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 167.223998] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 167.235443] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 167.236249] systemd[1]: suid-sgid-wrappers.service: Consumed 2.866s CPU time, 3.2M memory peak. vm-test-run-wal2json> server # [ 167.306610] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 167.354797] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 167.371165] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 167.862903] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 167.877188] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 169.138073] postgresql-migrate-start[1926]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 169.143162] postgresql-migrate-start[1926]: This user must also own the server process. vm-test-run-wal2json> server # [ 169.233037] postgresql-migrate-start[1926]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 169.234517] postgresql-migrate-start[1926]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 169.235054] postgresql-migrate-start[1926]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 169.235387] postgresql-migrate-start[1926]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 169.235970] postgresql-migrate-start[1926]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 169.258334] postgresql-migrate-start[1926]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 169.260970] postgresql-migrate-start[1926]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 170.409330] postgresql-migrate-start[1926]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 171.051478] postgresql-migrate-start[1926]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 176.454059] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:08.0/virtio7/input/input3 vm-test-run-wal2json> server # [ 183.536002] postgresql-migrate-start[1926]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 183.567259] postgresql-migrate-start[1926]: creating configuration files ... ok vm-test-run-wal2json> server # [ 187.228261] postgresql-migrate-start[1926]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 190.096161] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 195.144541] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-wal2json> server # [ 195.505264] systemd[1]: Finished Virtual Console Setup. vm-test-run-wal2json> server # [ 197.634814] systemd-logind[660]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-wal2json> server # [ 199.215048] postgresql-migrate-start[1926]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 200.628917] postgresql-migrate-start[1926]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 200.629685] postgresql-migrate-start[1926]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 200.629955] postgresql-migrate-start[1926]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 200.630182] postgresql-migrate-start[1926]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 200.630423] postgresql-migrate-start[1926]: /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 204.368447] postgresql-migrate-start[2126]: Performing Consistency Checks vm-test-run-wal2json> server # [ 204.371661] postgresql-migrate-start[2126]: ----------------------------- vm-test-run-wal2json> server # [ 204.374391] postgresql-migrate-start[2126]: Checking cluster versions ok vm-test-run-wal2json> server # [ 206.634580] postgresql-migrate-start[2126]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 206.686249] postgresql-migrate-start[2126]: Checking database connection settings ok vm-test-run-wal2json> server # [ 206.758598] postgresql-migrate-start[2126]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 206.769291] postgresql-migrate-start[2126]: Checking for contrib/isn with bigint-passing mismatch ok vm-test-run-wal2json> server # [ 207.373220] postgresql-migrate-start[2126]: Checking data type usage ok vm-test-run-wal2json> server # [ 207.547910] postgresql-migrate-start[2126]: Checking for not-null constraint inconsistencies ok vm-test-run-wal2json> server # [ 208.144024] postgresql-migrate-start[2126]: Creating dump of global objects ok vm-test-run-wal2json> server # [ 210.065364] postgresql-migrate-start[2126]: Creating dump of database schemas ok vm-test-run-wal2json> server # [ 212.163016] postgresql-migrate-start[2126]: Checking for presence of required libraries ok vm-test-run-wal2json> server # [ 212.234309] postgresql-migrate-start[2126]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 212.297167] postgresql-migrate-start[2126]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 212.299236] postgresql-migrate-start[2126]: Checking for new cluster tablespace directories ok vm-test-run-wal2json> server # [ 212.305541] postgresql-migrate-start[2126]: If pg_upgrade fails after this point, you must re-initdb the vm-test-run-wal2json> server # [ 212.306381] postgresql-migrate-start[2126]: new cluster before continuing. vm-test-run-wal2json> server # [ 212.313871] postgresql-migrate-start[2126]: Performing Upgrade vm-test-run-wal2json> server # [ 212.317384] postgresql-migrate-start[2126]: ------------------ vm-test-run-wal2json> server # [ 212.354943] postgresql-migrate-start[2126]: Setting locale and encoding for new cluster ok vm-test-run-wal2json> server # [ 214.374677] postgresql-migrate-start[2126]: Analyzing all rows in the new cluster ok vm-test-run-wal2json> server # [ 215.211703] postgresql-migrate-start[2126]: Freezing all rows in the new cluster ok vm-test-run-wal2json> server # [ 215.498493] postgresql-migrate-start[2126]: Deleting files from new pg_xact ok vm-test-run-wal2json> server # [ 215.628013] postgresql-migrate-start[2126]: Copying old pg_xact to new server ok vm-test-run-wal2json> server # [ 215.969806] postgresql-migrate-start[2126]: Setting oldest XID for new cluster ok vm-test-run-wal2json> server # [ 216.913312] postgresql-migrate-start[2126]: Setting next transaction ID and epoch for new cluster ok vm-test-run-wal2json> server # [ 216.915511] postgresql-migrate-start[2126]: Deleting files from new pg_multixact/offsets ok vm-test-run-wal2json> server # [ 217.041632] postgresql-migrate-start[2126]: Copying old pg_multixact/offsets to new server ok vm-test-run-wal2json> server # [ 217.042854] postgresql-migrate-start[2126]: Deleting files from new pg_multixact/members ok vm-test-run-wal2json> server # [ 217.165269] postgresql-migrate-start[2126]: Copying old pg_multixact/members to new server ok vm-test-run-wal2json> server # [ 217.451892] postgresql-migrate-start[2126]: Setting next multixact ID and offset for new cluster ok vm-test-run-wal2json> server # [ 217.746650] postgresql-migrate-start[2126]: Resetting WAL archives ok vm-test-run-wal2json> server # [ 219.180613] postgresql-migrate-start[2126]: Setting frozenxid and minmxid counters in new cluster ok vm-test-run-wal2json> server # [ 219.515328] postgresql-migrate-start[2126]: Restoring global objects in the new cluster ok vm-test-run-wal2json> server # [ 221.321012] postgresql-migrate-start[2126]: Restoring database schemas in the new cluster ok vm-test-run-wal2json> server # [ 221.943767] postgresql-migrate-start[2126]: Copying user relation files ok vm-test-run-wal2json> server # [ 222.239150] postgresql-migrate-start[2126]: Setting next OID for new cluster ok vm-test-run-wal2json> server # [ 223.788094] postgresql-migrate-start[2126]: Sync data directory to disk ok vm-test-run-wal2json> server # [ 223.792362] postgresql-migrate-start[2126]: Creating script to delete old cluster ok vm-test-run-wal2json> server # [ 225.750163] postgresql-migrate-start[2126]: Checking for extension updates ok vm-test-run-wal2json> server # [ 226.016523] postgresql-migrate-start[2126]: Upgrade Complete vm-test-run-wal2json> server # [ 226.018488] postgresql-migrate-start[2126]: ---------------- vm-test-run-wal2json> server # [ 226.018946] postgresql-migrate-start[2126]: Optimizer statistics are not transferred by pg_upgrade. vm-test-run-wal2json> server # [ 226.019264] postgresql-migrate-start[2126]: Once you start the new server, consider running: vm-test-run-wal2json> server # [ 226.019928] postgresql-migrate-start[2126]: /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/bin/vacuumdb --all --analyze-in-stages vm-test-run-wal2json> server # [ 226.020909] postgresql-migrate-start[2126]: Running this script will delete the old cluster's data files: vm-test-run-wal2json> server # [ 226.022558] postgresql-migrate-start[2126]: ./delete_old_cluster.sh vm-test-run-wal2json> server # [ 226.059892] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 226.105918] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 227.495315] postgres[2291]: [2291] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 227.500868] postgres[2291]: [2291] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 227.502513] postgres[2291]: [2291] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 227.515003] postgres[2291]: [2291] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 227.578251] postgres[2297]: [2297] LOG: database system was shut down at 2026-11-13 16:52:29 GMT vm-test-run-wal2json> server # [ 227.654512] postgres[2291]: [2291] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 227.679404] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 227.711648] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 228.468771] postgresql-setup-start[2307]: ALTER ROLE vm-test-run-wal2json> server # [ 228.517480] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 228.527479] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # the following new units were started: postgresql-migrate.service, sys-devices-platform-4010000000.pcie-pci0000:00-0000:00:0b.0-virtio9-virtio\x2dports-vport9p0.device, sys-devices-virtual-input-mice.device, sys-devices-virtual-misc-rfkill.device, sys-devices-virtual-misc-tun.device, sys-devices-virtual-mtd-mtd0ro.device, sysinit-reactivation.target, systemd-rfkill.socket, systemd-tmpfiles-resetup.service, systemd-vconsole-setup.service vm-test-run-wal2json> server # [ 228.826979] nixos[1591]: finished switching to system configuration /nix/store/hmz9j57b9fyim34b3j0py7pdygx96kkw-nixos-system-server-test vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 0.79 seconds) vm-test-run-wal2json> server: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no' vm-test-run-wal2json> server: (finished: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no', in 0.17 seconds) vm-test-run-wal2json> (finished: subtest: switch to postgresql 17, in 96.04 seconds) vm-test-run-wal2json> subtest: Check last version of the extension after postgresql upgrade vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.37 seconds) vm-test-run-wal2json> (finished: subtest: Check last version of the extension after postgresql upgrade, in 0.37 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.36 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.38 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.34 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 17, in 1.07 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 231.637329] sudo[2333]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 231.764602] sudo[2333]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 232.248584] postgres[2340]: [2340] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 232.251655] postgres[2340]: [2340] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 232.253821] postgres[2340]: [2340] STATEMENT: select vm-test-run-wal2json> server # [ 232.254896] postgres[2340]: 1 vm-test-run-wal2json> server # [ 232.255376] postgres[2340]: from vm-test-run-wal2json> server # [ 232.255671] postgres[2340]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 232.299338] postgres[2340]: [2340] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 232.301644] postgres[2340]: [2340] DETAIL: Streaming transactions committing after 0/8034ED0, reading WAL from 0/8034E98. vm-test-run-wal2json> server # [ 232.302826] postgres[2340]: [2340] STATEMENT: select vm-test-run-wal2json> server # [ 232.303814] postgres[2340]: data vm-test-run-wal2json> server # [ 232.305444] postgres[2340]: from vm-test-run-wal2json> server # [ 232.306483] postgres[2340]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 232.307712] postgres[2340]: 'reg_test', vm-test-run-wal2json> server # [ 232.308075] postgres[2340]: null, vm-test-run-wal2json> server # [ 232.308316] postgres[2340]: null, vm-test-run-wal2json> server # [ 232.310246] postgres[2340]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 232.310764] postgres[2340]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 232.311088] postgres[2340]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 232.311355] postgres[2340]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 232.312464] postgres[2340]: 'format-version', '2', vm-test-run-wal2json> server # [ 232.313873] postgres[2340]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 232.314279] postgres[2340]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 232.314995] postgres[2340]: ) x; vm-test-run-wal2json> server # [ 232.315489] postgres[2340]: [2340] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 232.315980] postgres[2340]: [2340] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 232.317621] postgres[2340]: [2340] STATEMENT: select vm-test-run-wal2json> server # [ 232.318478] postgres[2340]: data vm-test-run-wal2json> server # [ 232.318906] postgres[2340]: from vm-test-run-wal2json> server # [ 232.319155] postgres[2340]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 232.319401] postgres[2340]: 'reg_test', vm-test-run-wal2json> server # [ 232.319618] postgres[2340]: null, vm-test-run-wal2json> server # [ 232.319823] postgres[2340]: null, vm-test-run-wal2json> server # [ 232.320025] postgres[2340]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 232.321219] postgres[2340]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 232.321715] postgres[2340]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 232.322903] postgres[2340]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 232.323347] postgres[2340]: 'format-version', '2', vm-test-run-wal2json> server # [ 232.323601] postgres[2340]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 232.323837] postgres[2340]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 232.324647] postgres[2340]: ) x; vm-test-run-wal2json> server # [ 232.573418] sudo[2333]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.34 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 532 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after extension upgrade, in 1.34 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.37 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.38 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.35 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.10 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 234.018752] sudo[2355]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 234.152997] sudo[2355]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 234.562398] postgres[2362]: [2362] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 234.563721] postgres[2362]: [2362] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 234.564437] postgres[2362]: [2362] STATEMENT: select vm-test-run-wal2json> server # [ 234.566101] postgres[2362]: 1 vm-test-run-wal2json> server # [ 234.567465] postgres[2362]: from vm-test-run-wal2json> server # [ 234.568144] postgres[2362]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 234.600031] postgres[2362]: [2362] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 234.602689] postgres[2362]: [2362] DETAIL: Streaming transactions committing after 0/803B920, reading WAL from 0/803B8E8. vm-test-run-wal2json> server # [ 234.603502] postgres[2362]: [2362] STATEMENT: select vm-test-run-wal2json> server # [ 234.604137] postgres[2362]: data vm-test-run-wal2json> server # [ 234.605446] postgres[2362]: from vm-test-run-wal2json> server # [ 234.606544] postgres[2362]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 234.607207] postgres[2362]: 'reg_test', vm-test-run-wal2json> server # [ 234.607826] postgres[2362]: null, vm-test-run-wal2json> server # [ 234.608480] postgres[2362]: null, vm-test-run-wal2json> server # [ 234.609483] postgres[2362]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 234.610913] postgres[2362]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 234.611340] postgres[2362]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 234.613254] postgres[2362]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 234.614152] postgres[2362]: 'format-version', '2', vm-test-run-wal2json> server # [ 234.615231] postgres[2362]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 234.616092] postgres[2362]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 234.618218] postgres[2362]: ) x; vm-test-run-wal2json> server # [ 234.621049] postgres[2362]: [2362] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 234.622282] postgres[2362]: [2362] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 234.623025] postgres[2362]: [2362] STATEMENT: select vm-test-run-wal2json> server # [ 234.623476] postgres[2362]: data vm-test-run-wal2json> server # [ 234.624024] postgres[2362]: from vm-test-run-wal2json> server # [ 234.626019] postgres[2362]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 234.626480] postgres[2362]: 'reg_test', vm-test-run-wal2json> server # [ 234.628321] postgres[2362]: null, vm-test-run-wal2json> server # [ 234.630706] postgres[2362]: null, vm-test-run-wal2json> server # [ 234.631891] postgres[2362]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 234.633221] postgres[2362]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 234.633650] postgres[2362]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 234.633980] postgres[2362]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 234.634425] postgres[2362]: 'format-version', '2', vm-test-run-wal2json> server # [ 234.635403] postgres[2362]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 234.636367] postgres[2362]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 234.637401] postgres[2362]: ) x; vm-test-run-wal2json> server # [ 234.859426] sudo[2355]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.18 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 441 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after installing the last version, in 1.18 seconds) vm-test-run-wal2json> subtest: switch to orioledb 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 240.690690] nixos[2369]: switching to system configuration /nix/store/dl6wyy7czm28nb9xs2ihjkf61lrf9vgq-nixos-system-server-test vm-test-run-wal2json> server # [ 240.702920] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 240.717925] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 240.720733] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 240.725734] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 240.735479] postgres[2291]: [2291] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 240.738855] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 240.743285] postgres[2291]: [2291] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 240.805123] postgres[2291]: [2291] LOG: background worker "logical replication launcher" (PID 2300) exited with exit code 1 vm-test-run-wal2json> server # [ 240.823559] postgres[2295]: [2295] LOG: shutting down vm-test-run-wal2json> server # [ 240.824490] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 240.841149] postgres[2295]: [2295] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 240.976371] postgres[2295]: [2295] LOG: checkpoint complete: wrote 57 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.040 s, sync=0.052 s, total=0.158 s; sync files=45, longest=0.012 s, average=0.002 s; distance=242 kB, estimate=242 kB; lsn=0/803C9C0, redo lsn=0/803C9C0 vm-test-run-wal2json> server # [ 241.014552] postgres[2291]: [2291] LOG: database system is shut down vm-test-run-wal2json> server # [ 241.072592] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 241.078788] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 241.084098] systemd[1]: postgresql.service: Consumed 2.202s CPU time, 22.4M memory peak, 264K written to disk. vm-test-run-wal2json> server # [ 241.124629] systemd[1]: postgresql-migrate.service: Deactivated successfully. vm-test-run-wal2json> server # [ 241.130850] systemd[1]: Stopped postgresql-migrate.service. vm-test-run-wal2json> server # [ 241.137679] systemd[1]: postgresql-migrate.service: Consumed 35.522s CPU time, 93.6M memory peak, 173M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 245.335133] systemd[1]: Reload requested from client PID 2369 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 245.340945] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 251.118562] systemd[1]: Reloading finished in 5767 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 251.408410] systemd[1]: Stopped target Reactivate sysinit units. vm-test-run-wal2json> server # [ 251.415938] systemd[1]: Stopping Reactivate sysinit units... vm-test-run-wal2json> server # [ 251.418998] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 251.455705] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 251.756706] dbus-daemon[633]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 251.935203] dbus-daemon[633]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 251.950787] dbus-send[2445]: method return time=1794588775.433865 sender=org.freedesktop.DBus -> destination=:1.7 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 252.015386] dbus-daemon[633]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 252.186063] dbus-daemon[633]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 252.198013] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 252.220858] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 252.222979] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 252.273119] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 252.348096] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 252.432934] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 252.465800] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 252.467339] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 252.633488] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 252.678060] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 252.679731] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 252.691422] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 252.699970] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 252.710598] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 252.711761] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 252.942481] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 252.953581] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 253.390646] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 256.363403] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 256.367360] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 256.376791] systemd[1]: suid-sgid-wrappers.service: Consumed 1.694s CPU time, 3.5M memory peak. vm-test-run-wal2json> server # [ 256.423182] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 257.646246] postgresql-pre-start[2528]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 257.650147] postgresql-pre-start[2528]: This user must also own the server process. vm-test-run-wal2json> server # [ 257.719262] postgresql-pre-start[2528]: Using language tag "en-US" for ICU locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 257.721370] postgresql-pre-start[2528]: The database cluster will be initialized with this locale configuration: vm-test-run-wal2json> server # [ 257.722268] postgresql-pre-start[2528]: locale provider: icu vm-test-run-wal2json> server # [ 257.723064] postgresql-pre-start[2528]: default collation: en-US vm-test-run-wal2json> server # [ 257.725308] postgresql-pre-start[2528]: LC_COLLATE: en_US.UTF-8 vm-test-run-wal2json> server # [ 257.727167] postgresql-pre-start[2528]: LC_CTYPE: en_US.UTF-8 vm-test-run-wal2json> server # [ 257.727951] postgresql-pre-start[2528]: LC_MESSAGES: en_US.UTF-8 vm-test-run-wal2json> server # [ 257.729512] postgresql-pre-start[2528]: LC_MONETARY: en_US.UTF-8 vm-test-run-wal2json> server # [ 257.730268] postgresql-pre-start[2528]: LC_NUMERIC: en_US.UTF-8 vm-test-run-wal2json> server # [ 257.730586] postgresql-pre-start[2528]: LC_TIME: en_US.UTF-8 vm-test-run-wal2json> server # [ 257.733792] postgresql-pre-start[2528]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 257.736325] postgresql-pre-start[2528]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 257.738332] postgresql-pre-start[2528]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 257.742400] postgresql-pre-start[2528]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 257.745877] postgresql-pre-start[2528]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 258.346026] postgresql-pre-start[2528]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 258.800013] postgresql-pre-start[2528]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 266.462416] postgresql-pre-start[2528]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 266.483404] postgresql-pre-start[2528]: creating configuration files ... ok vm-test-run-wal2json> server # [ 268.478534] postgresql-pre-start[2528]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 273.533785] postgresql-pre-start[2528]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 274.847732] postgresql-pre-start[2528]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 274.849745] postgresql-pre-start[2528]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 274.850996] postgresql-pre-start[2528]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 274.853598] postgresql-pre-start[2528]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 274.855806] postgresql-pre-start[2528]: /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 275.907534] postgres[2541]: [2541] LOG: registered custom resource manager "OrioleDB resource manager" with ID 129 vm-test-run-wal2json> server # [ 276.252136] postgres[2541]: [2541] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 276.331004] postgres[2541]: [2541] LOG: listening on IPv6 address "::1", port 5432 vm-test-run-wal2json> server # [ 276.335673] postgres[2541]: [2541] LOG: listening on IPv4 address "127.0.0.1", port 5432 vm-test-run-wal2json> server # [ 276.347672] postgres[2541]: [2541] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 276.429620] postgres[2547]: [2547] LOG: Cleanup of old files at startup. Checkpoint 0 vm-test-run-wal2json> server # [ 276.436670] postgres[2547]: [2547] LOG: database system was shut down at 2026-11-13 16:53:16 GMT vm-test-run-wal2json> server # [ 276.442487] postgres[2548]: [2548] LOG: orioledb background writer 0 started vm-test-run-wal2json> server # [ 276.530096] postgres[2541]: [2541] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 276.564938] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 276.606167] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 277.729930] postgresql-setup-start[2555]: CREATE EXTENSION vm-test-run-wal2json> server # [ 278.141216] postgresql-setup-start[2561]: CREATE ROLE vm-test-run-wal2json> server # [ 278.307592] postgresql-setup-start[2563]: ALTER ROLE vm-test-run-wal2json> server # [ 278.356257] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 278.371389] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 278.659028] nixos[2369]: finished switching to system configuration /nix/store/dl6wyy7czm28nb9xs2ihjkf61lrf9vgq-nixos-system-server-test vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" , in 0.35 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.32 seconds) vm-test-run-wal2json> (finished: subtest: switch to orioledb 17, in 44.48 seconds) vm-test-run-wal2json> subtest: Check upgrade path with orioledb 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.31 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.42 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.33 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with orioledb 17, in 1.06 seconds) vm-test-run-wal2json> subtest: Check pg_regress with orioledb 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" vm-test-run-wal2json> server # [ 280.781759] sudo[2586]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 wal2json vm-test-run-wal2json> server # [ 280.915365] sudo[2586]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 281.531592] postgres[2593]: [2593] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 281.534602] postgres[2593]: [2593] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 281.535852] postgres[2593]: [2593] STATEMENT: select vm-test-run-wal2json> server # [ 281.537453] postgres[2593]: 1 vm-test-run-wal2json> server # [ 281.537885] postgres[2593]: from vm-test-run-wal2json> server # [ 281.538370] postgres[2593]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 281.586552] postgres[2593]: [2593] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 281.589583] postgres[2593]: [2593] DETAIL: Streaming transactions committing after 0/15908A0, reading WAL from 0/1590850. vm-test-run-wal2json> server # [ 281.591100] postgres[2593]: [2593] STATEMENT: select vm-test-run-wal2json> server # [ 281.591447] postgres[2593]: data vm-test-run-wal2json> server # [ 281.593228] postgres[2593]: from vm-test-run-wal2json> server # [ 281.593794] postgres[2593]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 281.594071] postgres[2593]: 'reg_test', vm-test-run-wal2json> server # [ 281.594420] postgres[2593]: null, vm-test-run-wal2json> server # [ 281.594669] postgres[2593]: null, vm-test-run-wal2json> server # [ 281.594880] postgres[2593]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 281.595253] postgres[2593]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 281.595524] postgres[2593]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 281.597604] postgres[2593]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 281.598038] postgres[2593]: 'format-version', '2', vm-test-run-wal2json> server # [ 281.598470] postgres[2593]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 281.599019] postgres[2593]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 281.599977] postgres[2593]: ) x; vm-test-run-wal2json> server # [ 281.601406] postgres[2593]: [2593] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 281.601925] postgres[2593]: [2593] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 281.602219] postgres[2593]: [2593] STATEMENT: select vm-test-run-wal2json> server # [ 281.602473] postgres[2593]: data vm-test-run-wal2json> server # [ 281.602689] postgres[2593]: from vm-test-run-wal2json> server # [ 281.603885] postgres[2593]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 281.605816] postgres[2593]: 'reg_test', vm-test-run-wal2json> server # [ 281.606173] postgres[2593]: null, vm-test-run-wal2json> server # [ 281.606417] postgres[2593]: null, vm-test-run-wal2json> server # [ 281.606846] postgres[2593]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 281.607557] postgres[2593]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 281.607922] postgres[2593]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 281.608350] postgres[2593]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 281.609922] postgres[2593]: 'format-version', '2', vm-test-run-wal2json> server # [ 281.610439] postgres[2593]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 281.610989] postgres[2593]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 281.613587] postgres[2593]: ) x; vm-test-run-wal2json> server # [ 281.878321] sudo[2586]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/z02jpqqlrpqlfcs9xvz0iyv60bcz18c6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" , in 1.49 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 667 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with orioledb 17 after installing the last version, in 1.49 seconds) vm-test-run-wal2json> (finished: run the VM test script, in 283.00 seconds) vm-test-run-wal2json> test script finished in 283.31s vm-test-run-wal2json> cleanup vm-test-run-wal2json> kill machine (pid 9) vm-test-run-wal2json> qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/a1mjjnpfivsx5gi4rxbcr54vl6gyjfzj-python3-3.13.11/bin/python3.13) vm-test-run-wal2json> vde_switch: EOF data port: Interrupted system call vm-test-run-wal2json> kill vlan (pid 7) vm-test-run-wal2json> (finished: cleanup, in 0.01 seconds) vm-test-run-wal2json> vde_switch: Caught signal 15, cleaning up and exiting