these 2 derivations will be built: /nix/store/lkjqdr0zb7kdl4h575mp1jimislssvf0-nixos-test-driver-wal2json.drv /nix/store/3qzwg0vf6nalqnaz4bdd425fc80hwl8c-vm-test-run-wal2json.drv building '/nix/store/lkjqdr0zb7kdl4h575mp1jimislssvf0-nixos-test-driver-wal2json.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/lkjqdr0zb7kdl4h575mp1jimislssvf0-nixos-test-driver-wal2json.drv' nixos-test-driver-wal2json> Running type check (enable/disable: config.skipTypeCheck) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck nixos-test-driver-wal2json> Success: no issues found in 1 source file nixos-test-driver-wal2json> additionally exposed symbols: nixos-test-driver-wal2json> , nixos-test-driver-wal2json> , nixos-test-driver-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug nixos-test-driver-wal2json> Linting test script (enable/disable: config.skipLint) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint building '/nix/store/3qzwg0vf6nalqnaz4bdd425fc80hwl8c-vm-test-run-wal2json.drv' on 'ssh-ng://builder@mac-linux-builder' building '/nix/store/3qzwg0vf6nalqnaz4bdd425fc80hwl8c-vm-test-run-wal2json.drv' vm-test-run-wal2json> Machine state will be reset. To keep it, pass --keep-vm-state vm-test-run-wal2json> start all VLans vm-test-run-wal2json> start vlan vm-test-run-wal2json> running vlan (pid 7; ctl /build/vde1.ctl) vm-test-run-wal2json> (finished: start all VLans, in 0.00 seconds) vm-test-run-wal2json> Test will time out and terminate in 3600 seconds vm-test-run-wal2json> run the VM test script vm-test-run-wal2json> additionally exposed symbols: vm-test-run-wal2json> server, vm-test-run-wal2json> vlan1, vm-test-run-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug vm-test-run-wal2json> Running tests for extension: wal2json vm-test-run-wal2json> start all VMs vm-test-run-wal2json> server: starting vm vm-test-run-wal2json> mke2fs 1.47.3 (8-Jul-2025) vm-test-run-wal2json> qemu-system-aarch64: Could not access KVM kernel module: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: failed to initialize kvm: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: falling back to tcg vm-test-run-wal2json> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-wal2json> server: QEMU running (pid 9) vm-test-run-wal2json> server # Formatting '/build/vm-state-server/tmp.SsNllfnddB', fmt=raw size=1073741824 vm-test-run-wal2json> server # Discarding device blocks: 0/262144 done vm-test-run-wal2json> server # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-wal2json> server # Filesystem UUID: 4042c53e-cf25-4c5b-90c8-f7bbda045d15 vm-test-run-wal2json> server # Superblock backups stored on blocks: vm-test-run-wal2json> server # 32768, 98304, 163840, 229376 vm-test-run-wal2json> (finished: start all VMs, in 0.12 seconds) vm-test-run-wal2json> server: waiting for unit multi-user.target vm-test-run-wal2json> server: waiting for the VM to finish booting vm-test-run-wal2json> server # vm-test-run-wal2json> server # Allocating group tables: 0/8 done vm-test-run-wal2json> server # Writing inode tables: 0/8 done vm-test-run-wal2json> server # Creating journal (8192 blocks): done vm-test-run-wal2json> server # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-wal2json> server # vm-test-run-wal2json> server # Virtualisation disk image created. vm-test-run-wal2json> server # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510] vm-test-run-wal2json> server # [ 0.000000] Linux version 6.12.63 (runner@ie-supabase-native-arm-5hdpw-2qtrh) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP Thu Dec 18 12:55:23 UTC 2025 vm-test-run-wal2json> server # [ 0.000000] KASLR enabled vm-test-run-wal2json> server # [ 0.000000] random: crng init done vm-test-run-wal2json> server # [ 0.000000] Machine model: linux,dummy-virt vm-test-run-wal2json> server # [ 0.000000] efi: UEFI not found. vm-test-run-wal2json> server # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT vm-test-run-wal2json> server # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] NODE_DATA(0) allocated [mem 0x13f602200-0x13f60593f] vm-test-run-wal2json> server # [ 0.000000] Zone ranges: vm-test-run-wal2json> server # [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] vm-test-run-wal2json> server # [ 0.000000] DMA32 empty vm-test-run-wal2json> server # [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Device empty vm-test-run-wal2json> server # [ 0.000000] Movable zone start for each node vm-test-run-wal2json> server # [ 0.000000] Early memory node ranges vm-test-run-wal2json> server # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 vm-test-run-wal2json> server # [ 0.000000] psci: probing for conduit method from DT. vm-test-run-wal2json> server # [ 0.000000] psci: PSCIv1.1 detected in firmware. vm-test-run-wal2json> server # [ 0.000000] psci: Using standard PSCI v0.2 function IDs vm-test-run-wal2json> server # [ 0.000000] psci: Trusted OS migration not required vm-test-run-wal2json> server # [ 0.000000] psci: SMC Calling Convention v1.0 vm-test-run-wal2json> server # [ 0.000000] percpu: Embedded 88 pages/cpu s180056 r65536 d114856 u360448 vm-test-run-wal2json> server # [ 0.000000] Detected PIPT I-cache on CPU0 vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: GIC system register CPU interface vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: HCRX_EL2 register vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: 52-bit Virtual Addressing (LPA2) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Spectre-v4 vm-test-run-wal2json> server # [ 0.000000] alternatives: applying boot alternatives vm-test-run-wal2json> server # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/jw3gakad9xzrps7zrfw0b9rj0945fvbn-nixos-system-server-test/init regInfo=/nix/store/jmr84yi7w950mkfb47d29qmiwrjyniaf-closure-info/registration console=ttyAMA0,115200n8 console=tty0 vm-test-run-wal2json> server # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/jmr84yi7w950mkfb47d29qmiwrjyniaf-closure-info/registration", will be passed to user space. vm-test-run-wal2json> server # [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Fallback order for Node 0: 0 vm-test-run-wal2json> server # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 vm-test-run-wal2json> server # [ 0.000000] Policy zone: Normal vm-test-run-wal2json> server # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-wal2json> server # [ 0.000000] software IO TLB: area num 2. vm-test-run-wal2json> server # [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) vm-test-run-wal2json> server # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-wal2json> server # [ 0.000000] allocated 8388608 bytes of page_ext vm-test-run-wal2json> server # [ 0.000000] ftrace: allocating 72257 entries in 283 pages vm-test-run-wal2json> server # [ 0.000000] ftrace: allocated 283 pages with 5 groups vm-test-run-wal2json> server # [ 0.000000] rcu: Hierarchical RCU implementation. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU event tracing is enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] Rude variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] Tracing variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. vm-test-run-wal2json> server # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 vm-test-run-wal2json> server # [ 0.000000] GICv3: 256 SPIs implemented vm-test-run-wal2json> server # [ 0.000000] GICv3: 0 Extended SPIs implemented vm-test-run-wal2json> server # [ 0.000000] Root IRQ handler: gic_handle_irq vm-test-run-wal2json> server # [ 0.000000] GICv3: GICv3 features: 16 PPIs vm-test-run-wal2json> server # [ 0.000000] GICv3: GICD_CTRL.DS=1, SCR_EL3.FIQ=0 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 vm-test-run-wal2json> server # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @100ad0000 (indirect, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @100ae0000 (flat, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] GICv3: using LPI property table @0x0000000100af0000 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100b00000 vm-test-run-wal2json> server # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-wal2json> server # [ 0.000000] arch_timer: cp15 timer(s) running at 1000.00MHz (virt). vm-test-run-wal2json> server # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-wal2json> server # [ 0.000040] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns vm-test-run-wal2json> server # [ 0.003407] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-wal2json> server # [ 0.013876] Console: colour dummy device 80x25 vm-test-run-wal2json> server # [ 0.015439] printk: legacy console [tty0] enabled vm-test-run-wal2json> server # [ 0.021148] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) vm-test-run-wal2json> server # [ 0.021548] pid_max: default: 32768 minimum: 301 vm-test-run-wal2json> server # [ 0.023405] LSM: initializing lsm=capability,landlock,yama,bpf vm-test-run-wal2json> server # [ 0.024942] landlock: Up and running. vm-test-run-wal2json> server # [ 0.025004] Yama: becoming mindful. vm-test-run-wal2json> server # [ 0.027777] LSM support for eBPF active vm-test-run-wal2json> server # [ 0.030855] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.031312] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.059559] cacheinfo: Unable to detect cache hierarchy for CPU 0 vm-test-run-wal2json> server # [ 0.071086] rcu: Hierarchical SRCU implementation. vm-test-run-wal2json> server # [ 0.071182] rcu: Max phase no-delay instances is 1000. vm-test-run-wal2json> server # [ 0.073341] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-wal2json> server # [ 0.080286] fsl-mc MSI: its@8080000 domain created vm-test-run-wal2json> server # [ 0.082074] EFI services will not be available. vm-test-run-wal2json> server # [ 0.083770] smp: Bringing up secondary CPUs ... vm-test-run-wal2json> server # [ 0.087926] Detected PIPT I-cache on CPU1 vm-test-run-wal2json> server # [ 0.089158] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000 vm-test-run-wal2json> server # [ 0.089824] GICv3: CPU1: using allocated LPI pending table @0x0000000100b10000 vm-test-run-wal2json> server # [ 0.091449] CPU1: Booted secondary processor 0x0000000001 [0x000f0510] vm-test-run-wal2json> server # [ 0.094786] smp: Brought up 1 node, 2 CPUs vm-test-run-wal2json> server # [ 0.094931] SMP: Total of 2 processors activated. vm-test-run-wal2json> server # [ 0.094972] CPU: All CPU(s) started at EL1 vm-test-run-wal2json> server # [ 0.095251] CPU features: detected: Branch Target Identification vm-test-run-wal2json> server # [ 0.095326] CPU features: detected: 32-bit EL0 Support vm-test-run-wal2json> server # [ 0.095359] CPU features: detected: 32-bit EL1 Support vm-test-run-wal2json> server # [ 0.095387] CPU features: detected: ARMv8.4 Translation Table Level vm-test-run-wal2json> server # [ 0.095421] CPU features: detected: Instruction cache invalidation not required for I/D coherence vm-test-run-wal2json> server # [ 0.095461] CPU features: detected: Data cache clean to the PoU not required for I/D coherence vm-test-run-wal2json> server # [ 0.095521] CPU features: detected: Common not Private translations vm-test-run-wal2json> server # [ 0.095543] CPU features: detected: CRC32 instructions vm-test-run-wal2json> server # [ 0.095562] CPU features: detected: Data cache clean to Point of Deep Persistence vm-test-run-wal2json> server # [ 0.095587] CPU features: detected: Data cache clean to Point of Persistence vm-test-run-wal2json> server # [ 0.095609] CPU features: detected: Data independent timing control (DIT) vm-test-run-wal2json> server # [ 0.095635] CPU features: detected: E0PD vm-test-run-wal2json> server # [ 0.095653] CPU features: detected: Enhanced Counter Virtualization vm-test-run-wal2json> server # [ 0.095675] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) vm-test-run-wal2json> server # [ 0.095701] CPU features: detected: Enhanced Privileged Access Never vm-test-run-wal2json> server # [ 0.095722] CPU features: detected: Enhanced Virtualization Traps vm-test-run-wal2json> server # [ 0.095745] CPU features: detected: Fine Grained Traps vm-test-run-wal2json> server # [ 0.095823] CPU features: detected: Generic authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.095917] CPU features: detected: RCpc load-acquire (LDAPR) vm-test-run-wal2json> server # [ 0.095966] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2) vm-test-run-wal2json> server # [ 0.095994] CPU features: detected: LSE atomic instructions vm-test-run-wal2json> server # [ 0.096014] CPU features: detected: Memory Copy and Memory Set instructions vm-test-run-wal2json> server # [ 0.096040] CPU features: detected: Privileged Access Never vm-test-run-wal2json> server # [ 0.096063] CPU features: detected: RAS Extension Support vm-test-run-wal2json> server # [ 0.096086] CPU features: detected: Random Number Generator vm-test-run-wal2json> server # [ 0.096111] CPU features: detected: Speculation barrier (SB) vm-test-run-wal2json> server # [ 0.096133] CPU features: detected: Stage-2 Force Write-Back vm-test-run-wal2json> server # [ 0.096156] CPU features: detected: Trap EL0 IMPLEMENTATION DEFINED functionality vm-test-run-wal2json> server # [ 0.096185] CPU features: detected: TLB range maintenance instructions vm-test-run-wal2json> server # [ 0.096211] CPU features: detected: WFx with timeout vm-test-run-wal2json> server # [ 0.096255] CPU features: detected: Speculative Store Bypassing Safe (SSBS) vm-test-run-wal2json> server # [ 0.096283] CPU features: detected: Scalable Vector Extension vm-test-run-wal2json> server # [ 0.104691] alternatives: applying system-wide alternatives vm-test-run-wal2json> server # [ 0.120962] CPU features: detected: Hardware dirty bit management on CPU0-1 vm-test-run-wal2json> server # [ 0.121553] SVE: maximum available vector length 256 bytes per vector vm-test-run-wal2json> server # [ 0.121640] SVE: default vector length 64 bytes per vector vm-test-run-wal2json> server # [ 0.134919] Memory: 3922888K/4194304K available (23296K kernel code, 6546K rwdata, 24596K rodata, 4416K init, 1047K bss, 223164K reserved, 32768K cma-reserved) vm-test-run-wal2json> server # [ 0.156830] devtmpfs: initialized vm-test-run-wal2json> server # [ 0.183815] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns vm-test-run-wal2json> server # [ 0.184313] futex hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.187391] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL vm-test-run-wal2json> server # [ 0.187470] 0 pages in range for non-PLT usage vm-test-run-wal2json> server # [ 0.187513] 509248 pages in range for PLT usage vm-test-run-wal2json> server # [ 0.189901] pinctrl core: initialized pinctrl subsystem vm-test-run-wal2json> server # [ 0.200421] DMI not present or invalid. vm-test-run-wal2json> server # [ 0.219505] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-wal2json> server # [ 0.229954] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations vm-test-run-wal2json> server # [ 0.230928] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-wal2json> server # [ 0.231930] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-wal2json> server # [ 0.232185] audit: initializing netlink subsys (disabled) vm-test-run-wal2json> server # [ 0.234306] audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1 vm-test-run-wal2json> server # [ 0.239842] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-wal2json> server # [ 0.239892] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-wal2json> server # [ 0.239944] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-wal2json> server # [ 0.239974] thermal_sys: Registered thermal governor 'user_space' vm-test-run-wal2json> server # [ 0.240001] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-wal2json> server # [ 0.240600] cpuidle: using governor ladder vm-test-run-wal2json> server # [ 0.240868] cpuidle: using governor menu vm-test-run-wal2json> server # [ 0.242733] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. vm-test-run-wal2json> server # [ 0.243452] ASID allocator initialised with 65536 entries vm-test-run-wal2json> server # [ 0.250076] Serial: AMBA PL011 UART driver vm-test-run-wal2json> server # [ 0.294407] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 vm-test-run-wal2json> server # [ 0.296024] printk: legacy console [ttyAMA0] enabled vm-test-run-wal2json> server # [ 0.324951] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.325216] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-wal2json> server # [ 0.325339] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.325556] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page vm-test-run-wal2json> server # [ 0.325789] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.325879] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-wal2json> server # [ 0.325968] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.326237] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page vm-test-run-wal2json> server # [ 0.337936] fbcon: Taking over console vm-test-run-wal2json> server # [ 0.338523] ACPI: Interpreter disabled. vm-test-run-wal2json> server # [ 0.345768] iommu: Default domain type: Translated vm-test-run-wal2json> server # [ 0.345914] iommu: DMA domain TLB invalidation policy: strict mode vm-test-run-wal2json> server # [ 0.349803] SCSI subsystem initialized vm-test-run-wal2json> server # [ 0.351858] usbcore: registered new interface driver usbfs vm-test-run-wal2json> server # [ 0.352573] usbcore: registered new interface driver hub vm-test-run-wal2json> server # [ 0.353153] usbcore: registered new device driver usb vm-test-run-wal2json> server # [ 0.355332] pps_core: LinuxPPS API ver. 1 registered vm-test-run-wal2json> server # [ 0.355458] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti vm-test-run-wal2json> server # [ 0.355678] PTP clock support registered vm-test-run-wal2json> server # [ 0.356266] EDAC MC: Ver: 3.0.0 vm-test-run-wal2json> server # [ 0.358481] scmi_core: SCMI protocol bus registered vm-test-run-wal2json> server # [ 0.361013] FPGA manager framework vm-test-run-wal2json> server # [ 0.362298] Advanced Linux Sound Architecture Driver Initialized. vm-test-run-wal2json> server # [ 0.369622] vgaarb: loaded vm-test-run-wal2json> server # [ 0.375201] clocksource: Switched to clocksource arch_sys_counter vm-test-run-wal2json> server # [ 0.413911] VFS: Disk quotas dquot_6.6.0 vm-test-run-wal2json> server # [ 0.414240] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-wal2json> server # [ 0.418958] netfs: FS-Cache loaded vm-test-run-wal2json> server # [ 0.420179] pnp: PnP ACPI: disabled vm-test-run-wal2json> server # [ 0.444824] NET: Registered PF_INET protocol family vm-test-run-wal2json> server # [ 0.446407] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-wal2json> server # [ 0.541282] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.541667] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.541995] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.543739] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) vm-test-run-wal2json> server # [ 0.544528] TCP: Hash tables configured (established 32768 bind 32768) vm-test-run-wal2json> server # [ 0.546102] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear) vm-test-run-wal2json> server # [ 0.546579] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.547563] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.548910] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-wal2json> server # [ 0.549366] NET: Registered PF_XDP protocol family vm-test-run-wal2json> server # [ 0.549673] PCI: CLS 0 bytes, default 64 vm-test-run-wal2json> server # [ 0.553075] Trying to unpack rootfs image as initramfs... vm-test-run-wal2json> server # [ 0.553845] kvm [1]: HYP mode not available vm-test-run-wal2json> server # [ 0.647064] Initialise system trusted keyrings vm-test-run-wal2json> server # [ 0.648564] workingset: timestamp_bits=42 max_order=20 bucket_order=0 vm-test-run-wal2json> server # [ 0.651762] squashfs: version 4.0 (2009/01/31) Phillip Lougher vm-test-run-wal2json> server # [ 0.652871] 9p: Installing v9fs 9p2000 file system support vm-test-run-wal2json> server # [ 0.711073] Key type asymmetric registered vm-test-run-wal2json> server # [ 0.711297] Asymmetric key parser 'x509' registered vm-test-run-wal2json> server # [ 0.712436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) vm-test-run-wal2json> server # [ 0.713544] io scheduler mq-deadline registered vm-test-run-wal2json> server # [ 0.713979] io scheduler kyber registered vm-test-run-wal2json> server # [ 0.738208] pl061_gpio 9030000.pl061: PL061 GPIO chip registered vm-test-run-wal2json> server # [ 0.743156] ledtrig-cpu: registered to indicate activity on CPUs vm-test-run-wal2json> server # [ 0.746708] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: vm-test-run-wal2json> server # [ 0.747816] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 vm-test-run-wal2json> server # [ 0.748536] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 vm-test-run-wal2json> server # [ 0.749138] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 vm-test-run-wal2json> server # [ 0.749730] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits vm-test-run-wal2json> server # [ 0.750515] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] vm-test-run-wal2json> server # [ 0.753268] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 vm-test-run-wal2json> server # [ 0.753700] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-wal2json> server # [ 0.753912] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.754129] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.754277] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.756255] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.759142] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.760008] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.760179] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.760394] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.760569] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.761115] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.761452] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.761554] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.761662] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.762201] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.762472] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.762723] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.762957] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.763432] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.764225] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.764353] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.764518] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.765011] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.765171] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.765266] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.765572] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.766155] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.766438] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] vm-test-run-wal2json> server # [ 0.766547] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.766681] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.767388] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.767789] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.767900] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.768116] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.768236] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.768789] pci 0000:00:08.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.768957] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.769068] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.769526] pci 0000:00:09.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.769819] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.770372] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.770940] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.771237] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.772618] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.772883] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.773038] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.773198] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.773671] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.773874] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.773979] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.774232] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.776074] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned vm-test-run-wal2json> server # [ 0.776359] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned vm-test-run-wal2json> server # [ 0.776657] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.776868] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.777054] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.777198] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.777341] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.777473] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.777605] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.777734] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.777872] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.778003] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.778416] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.779337] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned vm-test-run-wal2json> server # [ 0.779749] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned vm-test-run-wal2json> server # [ 0.780232] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned vm-test-run-wal2json> server # [ 0.780387] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned vm-test-run-wal2json> server # [ 0.780500] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned vm-test-run-wal2json> server # [ 0.780683] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned vm-test-run-wal2json> server # [ 0.780796] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned vm-test-run-wal2json> server # [ 0.780908] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned vm-test-run-wal2json> server # [ 0.781318] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned vm-test-run-wal2json> server # [ 0.781611] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned vm-test-run-wal2json> server # [ 0.781735] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned vm-test-run-wal2json> server # [ 0.781852] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned vm-test-run-wal2json> server # [ 0.781981] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned vm-test-run-wal2json> server # [ 0.782491] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned vm-test-run-wal2json> server # [ 0.782602] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned vm-test-run-wal2json> server # [ 0.782705] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned vm-test-run-wal2json> server # [ 0.782808] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned vm-test-run-wal2json> server # [ 0.782908] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned vm-test-run-wal2json> server # [ 0.783012] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned vm-test-run-wal2json> server # [ 0.783713] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned vm-test-run-wal2json> server # [ 0.784122] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned vm-test-run-wal2json> server # [ 0.784433] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.784684] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.784908] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.785859] pci 0000:00:0a.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.844542] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.848571] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.850609] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.853143] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.856551] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.860119] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.862395] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.866280] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.869035] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.872073] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.874290] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.893088] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-wal2json> server # [ 0.902839] msm_serial: driver initialized vm-test-run-wal2json> server # [ 0.904591] SuperH (H)SCI(F) driver initialized vm-test-run-wal2json> server # [ 0.905021] STM32 USART driver initialized vm-test-run-wal2json> server # [ 0.955379] loop: module loaded vm-test-run-wal2json> server # [ 0.956984] virtio_blk virtio5: 2/0/0 default/read/poll queues vm-test-run-wal2json> server # [ 0.960901] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-wal2json> server # [ 0.970398] Freeing initrd memory: 10684K vm-test-run-wal2json> server # [ 0.973163] megasas: 07.727.03.00-rc1 vm-test-run-wal2json> server # [ 0.978224] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] vm-test-run-wal2json> server # [ 0.980660] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 0.981510] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 0.983690] Using buffer write method vm-test-run-wal2json> server # [ 0.984324] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] vm-test-run-wal2json> server # [ 0.985735] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 0.986052] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 0.987278] Using buffer write method vm-test-run-wal2json> server # [ 0.987492] Concatenating MTD devices: vm-test-run-wal2json> server # [ 0.988219] (0): "0.flash" vm-test-run-wal2json> server # [ 0.988355] (1): "0.flash" vm-test-run-wal2json> server # [ 0.988417] into device "0.flash" vm-test-run-wal2json> server # [ 1.009525] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-wal2json> server # [ 1.020996] thunder_xcv, ver 1.0 vm-test-run-wal2json> server # [ 1.021253] thunder_bgx, ver 1.0 vm-test-run-wal2json> server # [ 1.021438] nicpf, ver 1.0 vm-test-run-wal2json> server # [ 1.024328] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version vm-test-run-wal2json> server # [ 1.024482] hns3: Copyright (c) 2017 Huawei Corporation. vm-test-run-wal2json> server # [ 1.026309] hclge is initializing vm-test-run-wal2json> server # [ 1.026579] e1000: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.026799] e1000: Copyright (c) 1999-2006 Intel Corporation. vm-test-run-wal2json> server # [ 1.027093] e1000e: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.027717] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. vm-test-run-wal2json> server # [ 1.028526] igb: Intel(R) Gigabit Ethernet Network Driver vm-test-run-wal2json> server # [ 1.028644] igb: Copyright (c) 2007-2014 Intel Corporation. vm-test-run-wal2json> server # [ 1.028879] igbvf: Intel(R) Gigabit Virtual Function Network Driver vm-test-run-wal2json> server # [ 1.029072] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. vm-test-run-wal2json> server # [ 1.030424] sky2: driver version 1.30 vm-test-run-wal2json> server # [ 1.040007] ehci-pci 0000:00:0a.0: EHCI Host Controller vm-test-run-wal2json> server # [ 1.040584] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 vm-test-run-wal2json> server # [ 1.041465] usbcore: registered new interface driver usb-storage vm-test-run-wal2json> server # [ 1.041963] usbcore: registered new interface driver usbserial_generic vm-test-run-wal2json> server # [ 1.042347] usbserial: USB Serial support registered for generic vm-test-run-wal2json> server # [ 1.043011] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 vm-test-run-wal2json> server # [ 1.052667] rtc-pl031 9010000.pl031: registered as rtc0 vm-test-run-wal2json> server # [ 1.053280] rtc-pl031 9010000.pl031: setting system clock to 2026-11-13T15:06:31 UTC (1794582391) vm-test-run-wal2json> server # [ 1.055380] i2c_dev: i2c /dev entries driver vm-test-run-wal2json> server # [ 1.056074] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 vm-test-run-wal2json> server # [ 1.063759] hub 1-0:1.0: USB hub found vm-test-run-wal2json> server # [ 1.065280] hub 1-0:1.0: 6 ports detected vm-test-run-wal2json> server # [ 1.073265] sdhci: Secure Digital Host Controller Interface driver vm-test-run-wal2json> server # [ 1.073462] sdhci: Copyright(c) Pierre Ossman vm-test-run-wal2json> server # [ 1.075280] Synopsys Designware Multimedia Card Interface Driver vm-test-run-wal2json> server # [ 1.077939] sdhci-pltfm: SDHCI platform and OF driver helper vm-test-run-wal2json> server # [ 1.084815] hid: raw HID events driver (C) Jiri Kosina vm-test-run-wal2json> server # [ 1.087602] usbcore: registered new interface driver usbhid vm-test-run-wal2json> server # [ 1.087743] usbhid: USB HID core driver vm-test-run-wal2json> server # [ 1.096084] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available vm-test-run-wal2json> server # [ 1.110858] drop_monitor: Initializing network drop monitor service vm-test-run-wal2json> server # [ 1.113901] NET: Registered PF_INET6 protocol family vm-test-run-wal2json> server # [ 1.129730] Segment Routing with IPv6 vm-test-run-wal2json> server # [ 1.130173] In-situ OAM (IOAM) with IPv6 vm-test-run-wal2json> server # [ 1.131750] NET: Registered PF_PACKET protocol family vm-test-run-wal2json> server # [ 1.133330] 9pnet: Installing 9P2000 support vm-test-run-wal2json> server # [ 1.137422] Key type dns_resolver registered vm-test-run-wal2json> server # [ 1.174936] registered taskstats version 1 vm-test-run-wal2json> server # [ 1.177440] Loading compiled-in X.509 certificates vm-test-run-wal2json> server # [ 1.232698] Demotion targets for Node 0: null vm-test-run-wal2json> server # [ 1.235634] Key type .fscrypt registered vm-test-run-wal2json> server # [ 1.235802] Key type fscrypt-provisioning registered vm-test-run-wal2json> server # [ 1.243912] input: gpio-keys as /devices/platform/gpio-keys/input/input0 vm-test-run-wal2json> server # [ 1.284448] clk: Disabling unused clocks vm-test-run-wal2json> server # [ 1.284802] PM: genpd: Disabling unused power domains vm-test-run-wal2json> server # [ 1.285143] ALSA device list: vm-test-run-wal2json> server # [ 1.285268] No soundcards found. vm-test-run-wal2json> server # [ 1.368699] Freeing unused kernel memory: 4416K vm-test-run-wal2json> server # [ 1.369283] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-wal2json> server # [ 1.375044] Run /init as init process vm-test-run-wal2json> server # [ 1.571487] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 vm-test-run-wal2json> server # [ 1.694955] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 vm-test-run-wal2json> server # [ 1.819664] usb 1-2: new high-speed USB device number 3 using ehci-pci vm-test-run-wal2json> server # [ 1.935843] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev vm-test-run-wal2json> server # [ 2.006428] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 vm-test-run-wal2json> server # [ 2.010453] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 vm-test-run-wal2json> server # [ 2.056696] [drm] pci: virtio-gpu-pci detected at 0000:00:09.0 vm-test-run-wal2json> server # [ 2.057380] [drm] features: -virgl +edid -resource_blob -host_visible vm-test-run-wal2json> server # [ 2.057401] [drm] features: -context_init vm-test-run-wal2json> server # [ 2.059658] [drm] number of scanouts: 1 vm-test-run-wal2json> server # [ 2.059777] [drm] number of cap sets: 0 vm-test-run-wal2json> server # [ 2.069440] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:09.0 on minor 0 vm-test-run-wal2json> server # [ 2.102269] Console: switching to colour frame buffer device 160x50 vm-test-run-wal2json> server # [ 2.113373] virtio-pci 0000:00:09.0: [drm] fb0: virtio_gpudrmfb frame buffer device vm-test-run-wal2json> server # [ 4.972551] EXT4-fs (vda): mounted filesystem 4042c53e-cf25-4c5b-90c8-f7bbda045d15 r/w with ordered data mode. Quota mode: none. vm-test-run-wal2json> server # [ 7.492714] EXT4-fs (vda): re-mounted 4042c53e-cf25-4c5b-90c8-f7bbda045d15. vm-test-run-wal2json> server # [ 7.509758] booting system configuration /nix/store/jw3gakad9xzrps7zrfw0b9rj0945fvbn-nixos-system-server-test vm-test-run-wal2json> server # [ 19.528994] systemd[1]: systemd 258.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) vm-test-run-wal2json> server # [ 19.538533] systemd[1]: Detected virtualization qemu. vm-test-run-wal2json> server # [ 19.543703] systemd[1]: Detected architecture arm64. vm-test-run-wal2json> server # [ 19.548320] systemd[1]: Detected first boot. vm-test-run-wal2json> server # [ 19.574348] systemd[1]: Initializing machine ID from random generator. vm-test-run-wal2json> server # [ 19.607441] systemd[1]: Hostname set to . vm-test-run-wal2json> server # [ 20.832546] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-wal2json> server # [ 22.260981] NET: Registered PF_VSOCK protocol family vm-test-run-wal2json> server # [ 22.320318] Guest personality initialized and is inactive vm-test-run-wal2json> server # [ 22.325690] VMCI host device registered (name=vmci, major=10, minor=261) vm-test-run-wal2json> server # [ 22.331579] Initialized host personality vm-test-run-wal2json> server # [ 22.584494] systemd[1]: Applying preset policy. vm-test-run-wal2json> server # [ 26.468026] systemd[1]: Populated /etc with preset unit settings. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 29.893155] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-wal2json> server # [ 30.112481] systemd[1]: Created slice Slice /system/getty. vm-test-run-wal2json> server # [ 30.126724] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-wal2json> server # [ 30.140532] systemd[1]: Created slice User and Session Slice. vm-test-run-wal2json> server # [ 30.148757] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-wal2json> server # [ 30.154270] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-wal2json> server # [ 30.160417] systemd[1]: Expecting device /dev/hvc0... vm-test-run-wal2json> server # [ 30.164978] systemd[1]: Expecting device /dev/ttyAMA0... vm-test-run-wal2json> server # [ 30.168080] systemd[1]: Expecting device /sys/subsystem/net/devices/eth1... vm-test-run-wal2json> server # [ 30.172905] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-wal2json> server # [ 30.177326] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-wal2json> server # [ 30.180182] systemd[1]: Reached target Path Units. vm-test-run-wal2json> server # [ 30.185291] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 30.190356] systemd[1]: Reached target Slice Units. vm-test-run-wal2json> server # [ 30.195747] systemd[1]: Reached target Swaps. vm-test-run-wal2json> server # [ 30.232201] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-wal2json> server # [ 30.259400] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-wal2json> server # [ 30.270758] systemd[1]: Listening on Journal Audit Socket. vm-test-run-wal2json> server # [ 30.277573] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-wal2json> server # [ 30.284709] systemd[1]: Listening on Journal Sockets. vm-test-run-wal2json> server # [ 30.293315] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-wal2json> server # [ 30.297578] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 30.304413] systemd[1]: Listening on udev Control Socket. vm-test-run-wal2json> server # [ 30.312242] systemd[1]: Listening on udev Kernel Socket. vm-test-run-wal2json> server # [ 30.364918] systemd[1]: Mounting Huge Pages File System... vm-test-run-wal2json> server # [ 30.412520] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-wal2json> server # [ 30.464237] systemd[1]: Mounting Kernel Debug File System... vm-test-run-wal2json> server # [ 30.529488] systemd[1]: Mounting Kernel Trace File System... vm-test-run-wal2json> server # [ 30.670599] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-wal2json> server # [ 30.789293] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-wal2json> server # [ 30.825062] systemd[1]: Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs). vm-test-run-wal2json> server # [ 30.926089] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-wal2json> server # [ 30.948302] systemd[1]: Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm). vm-test-run-wal2json> server # [ 30.959962] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 31.061229] systemd[1]: Starting Load Kernel Module fuse... vm-test-run-wal2json> server # [ 31.072865] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 31.085000] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 31.178539] systemd[1]: Starting Journal Service... vm-test-run-wal2json> server # [ 31.248790] systemd[1]: Starting Load Kernel Modules... vm-test-run-wal2json> server # [ 31.329712] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-wal2json> server # [ 31.379689] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-wal2json> server # [ 31.388834] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 31.445340] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-wal2json> server # [ 31.529689] systemd[1]: Mounted Huge Pages File System. vm-test-run-wal2json> server # [ 31.542356] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-wal2json> server # [ 31.549679] systemd[1]: Mounted Kernel Debug File System. vm-test-run-wal2json> server # [ 31.558064] systemd[1]: Mounted Kernel Trace File System. vm-test-run-wal2json> server # [ 31.580231] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-wal2json> server # [ 31.599910] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-wal2json> server # [ 31.678957] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-wal2json> server # [ 31.824643] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-wal2json> server # [ 31.846882] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-wal2json> server # [ 32.439792] fuse: init (API version 7.41) vm-test-run-wal2json> server # [ 32.529842] EXT4-fs (vda): re-mounted 4042c53e-cf25-4c5b-90c8-f7bbda045d15. vm-test-run-wal2json> server # [ 32.542417] systemd[1]: modprobe@fuse.service: Deactivated successfully. vm-test-run-wal2json> server # [ 32.564050] systemd[1]: Finished Load Kernel Module fuse. vm-test-run-wal2json> server # [ 32.652087] systemd[1]: Mounting FUSE Control File System... vm-test-run-wal2json> server # [ 32.674197] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-wal2json> server # [ 32.705971] systemd[1]: Finished Load Kernel Modules. vm-test-run-wal2json> server # [ 32.774008] systemd[1]: Starting Firewall... vm-test-run-wal2json> server # [ 32.781218] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 32.849864] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-wal2json> server # [ 32.909480] systemd-journald[398]: Collecting audit messages is enabled. vm-test-run-wal2json> server # [ 32.929737] systemd[1]: Starting Apply Kernel Variables... vm-test-run-wal2json> server # [ 32.936102] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 32.963100] systemd[1]: Mounted FUSE Control File System. vm-test-run-wal2json> server # [ 34.069919] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-wal2json> server # [ 34.080945] systemd[1]: Reached target First Boot Complete. vm-test-run-wal2json> server # [ 34.465735] systemd[1]: Finished Apply Kernel Variables. vm-test-run-wal2json> server # [ 34.519851] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-wal2json> server # [ 34.608876] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-wal2json> server # [ 34.990363] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-wal2json> server # [ 35.850517] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-wal2json> server # [ 35.877121] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-wal2json> server # [ 35.926867] systemd[1]: Mounting /run/wrappers... vm-test-run-wal2json> server # [ 35.977432] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-wal2json> server # [ 36.192812] systemd[1]: Started Journal Service. vm-test-run-wal2json> server # [ 36.107647] systemd-modules-load[399]: Module 'atkbd' is built in vm-test-run-wal2json> server # [ 36.133629] systemd-modules-load[399]: Module 'loop' is built in vm-test-run-wal2json> server # [ 36.146380] systemd-oomd[400]: No swap; memory pressure usage will be degraded vm-test-run-wal2json> server # [ 36.212960] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-wal2json> server # [ 36.484970] systemd[1]: Mounted /run/wrappers. vm-test-run-wal2json> server # [ 36.516063] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 36.546896] systemd[1]: Listening on Boot Entries Service Socket. vm-test-run-wal2json> server # [ 36.617446] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 36.629632] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 36.654906] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-wal2json> server # [ 37.197112] systemd-journald[398]: Received client request to flush runtime journal. vm-test-run-wal2json> server # [ 38.022157] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-wal2json> server # [ 38.078400] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-wal2json> server # [ 38.167459] systemd-udevd[428]: Using default interface naming scheme 'v258'. vm-test-run-wal2json> server # [ 38.174662] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-wal2json> server # [ 38.197846] systemd[1]: Starting Create System Files and Directories... vm-test-run-wal2json> server # [ 40.550900] systemd[1]: Finished Create System Files and Directories. vm-test-run-wal2json> server # [ 40.620038] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-wal2json> server # [ 40.695744] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-wal2json> server # [ 41.007742] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-wal2json> server # [ 41.946967] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-wal2json> server # [ 42.976047] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-wal2json> server # [ 43.031630] systemd[1]: Starting Update is Completed... vm-test-run-wal2json> server # [ 43.948848] systemd[1]: Finished Update is Completed. vm-test-run-wal2json> server # [ 47.834495] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 47.842089] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 47.843824] systemd[1]: suid-sgid-wrappers.service: Consumed 3.006s CPU time, 5.5M memory peak. vm-test-run-wal2json> server # [ 50.940113] systemd[1]: Finished Firewall. vm-test-run-wal2json> server # [ 52.491446] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-wal2json> server # [ 52.502928] systemd[1]: Reached target System Initialization. vm-test-run-wal2json> server # [ 52.513618] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-wal2json> server # [ 52.523637] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-wal2json> server # [ 52.529545] systemd[1]: Reached target Timer Units. vm-test-run-wal2json> server # [ 52.540400] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-wal2json> server # [ 52.546088] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-wal2json> server # [ 52.560115] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-wal2json> server # [ 52.612708] systemd[1]: Starting OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK)... vm-test-run-wal2json> server # [ 52.628088] systemd[1]: Listening on Hostname Service Socket. vm-test-run-wal2json> server # [ 52.778427] (sh-issue)[635]: sshd-vsock.socket: Unable to locate executable '/usr/lib/systemd/systemd-ssh-issue': No such file or directory vm-test-run-wal2json> server # [ 52.816736] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK). vm-test-run-wal2json> server # [ 52.824996] systemd[1]: Reached target Socket Units. vm-test-run-wal2json> server # [ 52.837879] systemd[1]: Reached target Basic System. vm-test-run-wal2json> server # [ 52.872929] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-wal2json> server # [ 52.909548] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-wal2json> server # [ 52.948556] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 53.025313] systemd[1]: Started Reset console on configuration changes. vm-test-run-wal2json> server # [ 53.082787] systemd[1]: Starting resolvconf update... vm-test-run-wal2json> server # [ 53.157166] systemd[1]: Starting SSH Host Keys Generation... vm-test-run-wal2json> server # [ 54.618388] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-wal2json> server # [ 55.013236] nsncd[639]: Nov 13 15:07:25.380 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 55.028477] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 55.071797] dbus-daemon[637]: dbus[637]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 55.080995] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 55.086847] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 55.094259] systemd[1]: Starting User Login Management... vm-test-run-wal2json> server # [ 55.776713] systemd[1]: Started D-Bus System Message Bus. vm-test-run-wal2json> server # [ 56.899611] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 56.924098] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-wal2json> server # [ 56.958072] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-wal2json> server # [ 56.967002] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-wal2json> server # [ 56.978960] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 57.015598] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-wal2json> server # [ 57.054434] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 57.101170] systemd-logind[668]: New seat seat0. vm-test-run-wal2json> server # [ 57.146645] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 57.156715] systemd[1]: Started User Login Management. vm-test-run-wal2json> server # [ 57.221253] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 57.821306] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 57.837867] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 58.218433] nsncd[709]: Nov 13 15:07:28.719 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 58.244094] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 58.258483] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 58.259690] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 58.793103] systemd[1]: Finished resolvconf update. vm-test-run-wal2json> server # [ 58.825900] systemd[1]: Reached target Preparation for Network. vm-test-run-wal2json> server # [ 58.887598] systemd[1]: Starting DHCP Client... vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 60.705118] sshd-keygen-start[667]: Generating public/private rsa key pair. vm-test-run-wal2json> server # [ 60.714583] sshd-keygen-start[667]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key vm-test-run-wal2json> server # [ 60.722257] sshd-keygen-start[667]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub vm-test-run-wal2json> server # [ 60.733454] sshd-keygen-start[667]: The key fingerprint is: vm-test-run-wal2json> server # [ 60.738357] sshd-keygen-start[667]: SHA256:ABB5s8t/gNujR2jZflyDDFC73i5N5WjX1vsRZ/TsT2A root@server vm-test-run-wal2json> server # [ 60.745568] sshd-keygen-start[667]: The key's randomart image is: vm-test-run-wal2json> server # [ 60.747436] sshd-keygen-start[667]: +---[RSA 4096]----+ vm-test-run-wal2json> server # [ 60.753965] sshd-keygen-start[667]: | o+... | vm-test-run-wal2json> server # [ 60.757585] sshd-keygen-start[667]: | . +. . | vm-test-run-wal2json> server # [ 60.763834] sshd-keygen-start[667]: | . +o .| vm-test-run-wal2json> server # [ 60.770768] sshd-keygen-start[667]: | . .o . o.| vm-test-run-wal2json> server # [ 60.772175] sshd-keygen-start[667]: | . *.oS= . .E.=| vm-test-run-wal2json> server # [ 60.777382] sshd-keygen-start[667]: | B.+.* = o..+o| vm-test-run-wal2json> server # [ 60.781769] sshd-keygen-start[667]: | . *.*.o o oo| vm-test-run-wal2json> server # [ 60.790042] sshd-keygen-start[667]: | . B.= ..o| vm-test-run-wal2json> server # [ 60.801738] sshd-keygen-start[667]: | .o =. .o| vm-test-run-wal2json> server # [ 60.805416] sshd-keygen-start[667]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 60.827102] dhcpcd[754]: dhcpcd-10.2.4 starting vm-test-run-wal2json> server # [ 60.986892] dhcpcd[774]: dev: loaded udev vm-test-run-wal2json> server # [ 61.503912] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-wal2json> server # [ 61.679801] sshd-keygen-start[783]: Generating public/private ed25519 key pair. vm-test-run-wal2json> server # [ 61.682787] sshd-keygen-start[783]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key vm-test-run-wal2json> server # [ 61.685875] sshd-keygen-start[783]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub vm-test-run-wal2json> server # [ 61.687823] sshd-keygen-start[783]: The key fingerprint is: vm-test-run-wal2json> server # [ 61.689876] sshd-keygen-start[783]: SHA256:xjANvqcw88ALTzACl11q0LharD7z72TlwVOflmqoFQM root@server vm-test-run-wal2json> server # [ 61.691126] sshd-keygen-start[783]: The key's randomart image is: vm-test-run-wal2json> server # [ 61.693555] sshd-keygen-start[783]: +--[ED25519 256]--+ vm-test-run-wal2json> server # [ 61.694571] sshd-keygen-start[783]: |. o= .o | vm-test-run-wal2json> server # [ 61.695363] sshd-keygen-start[783]: |..o.oo o | vm-test-run-wal2json> server # [ 61.701252] sshd-keygen-start[783]: |..o.oE+ .. | vm-test-run-wal2json> server # [ 61.702526] sshd-keygen-start[783]: | .+= o=. . o | vm-test-run-wal2json> server # [ 61.704069] sshd-keygen-start[783]: | +. B .BS = | vm-test-run-wal2json> server # [ 61.704794] sshd-keygen-start[783]: |o + Bo+* o | vm-test-run-wal2json> server # [ 61.709780] sshd-keygen-start[783]: |. ooo+ o | vm-test-run-wal2json> server # [ 61.711782] sshd-keygen-start[783]: | + o o . | vm-test-run-wal2json> server # [ 61.714217] sshd-keygen-start[783]: | +.o+ | vm-test-run-wal2json> server # [ 61.715954] sshd-keygen-start[783]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 61.743479] systemd[1]: sshd-keygen.service: Deactivated successfully. vm-test-run-wal2json> server # [ 61.755290] systemd[1]: Finished SSH Host Keys Generation. vm-test-run-wal2json> server # [ 61.767574] systemd[1]: sshd-keygen.service: Consumed 3.591s CPU time, 2.9M memory peak. vm-test-run-wal2json> server # [ 62.130670] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-wal2json> server # [ 62.402764] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-wal2json> server # [ 62.410338] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-wal2json> server # [ 62.432321] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 vm-test-run-wal2json> server # [ 62.437415] cfg80211: failed to load regulatory.db vm-test-run-wal2json> server # [ 63.383162] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-wal2json> server # [ 63.323697] dhcpcd[774]: eth0: waiting for carrier vm-test-run-wal2json> server # [ 63.331017] dhcpcd[774]: eth0: carrier acquired vm-test-run-wal2json> server # [ 63.502154] dhcpcd[774]: DUID 00:01:00:01:32:89:e4:36:52:54:00:12:34:56 vm-test-run-wal2json> server # [ 63.504071] dhcpcd[774]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 63.507836] dhcpcd[774]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-wal2json> server # [ 64.119572] dhcpcd[774]: eth0: soliciting a DHCP lease vm-test-run-wal2json> server # [ 64.143201] dhcpcd[774]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-wal2json> server # [ 64.165642] dhcpcd[774]: eth0: probing address 10.0.2.15/24 vm-test-run-wal2json> server # [ 64.243260] systemd[1]: Found device /dev/hvc0. vm-test-run-wal2json> server # [ 64.675684] systemd[1]: Found device /dev/ttyAMA0. vm-test-run-wal2json> server # [ 64.727068] systemd[1]: Started backdoor.service. vm-test-run-wal2json> server # connecting to host... vm-test-run-wal2json> server # [ 65.424088] dhcpcd[774]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 65.430069] dhcpcd[774]: eth0: Router Advertisement from fe80::2 vm-test-run-wal2json> server # [ 65.430982] dhcpcd[774]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-wal2json> server # [ 65.433754] dhcpcd[774]: eth0: adding route to fec0::/64 vm-test-run-wal2json> server # [ 65.435284] dhcpcd[774]: eth0: adding default route via fe80::2 vm-test-run-wal2json> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-wal2json> server: connected to guest root shell vm-test-run-wal2json> server: (connecting took 66.52 seconds) vm-test-run-wal2json> server: (finished: waiting for the VM to finish booting, in 66.52 seconds) vm-test-run-wal2json> server # [ 68.818450] (udev-worker)[860]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 68.859817] (udev-worker)[861]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-wal2json> server # [ 68.870177] (udev-worker)[861]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 69.519072] dhcpcd[774]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 69.522224] dhcpcd[774]: eth0: adding route to 10.0.2.0/24 vm-test-run-wal2json> server # [ 69.526001] dhcpcd[774]: eth0: adding default route via 10.0.2.2 vm-test-run-wal2json> server # [ 71.119775] systemd[1]: Found device Virtio network device. vm-test-run-wal2json> server # [ 71.193649] systemd[1]: Starting Address configuration of eth1... vm-test-run-wal2json> server # [ 72.474919] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-wal2json> server # [ 72.774843] network-addresses-eth1-start[915]: adding address 192.168.1.1/24... done vm-test-run-wal2json> server # [ 73.033341] network-addresses-eth1-start[915]: adding address 2001:db8:1::1/64... done vm-test-run-wal2json> server # [ 73.353860] systemd[1]: Started DHCP Client. vm-test-run-wal2json> server # [ 73.433673] dhcpcd[774]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 73.493804] systemd[1]: Finished Address configuration of eth1. vm-test-run-wal2json> server # [ 73.578902] systemd[1]: Starting Networking Setup... vm-test-run-wal2json> server # [ 74.229830] dhcpcd[774]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 75.459118] dhcpcd[774]: eth0: rebinding lease of 10.0.2.15 vm-test-run-wal2json> server # [ 75.479842] dhcpcd[774]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 77.056094] systemd[1]: Finished Networking Setup. vm-test-run-wal2json> server # [ 77.066865] systemd[1]: Reached target Network. vm-test-run-wal2json> server # [ 77.128870] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 77.205082] systemd[1]: Starting SSH Daemon... vm-test-run-wal2json> server # [ 77.290683] systemd[1]: Starting Permit User Sessions... vm-test-run-wal2json> server # [ 78.123617] systemd[1]: Finished Permit User Sessions. vm-test-run-wal2json> server # [ 78.189327] systemd[1]: Started Getty on tty1. vm-test-run-wal2json> server # [ 78.200912] systemd[1]: Reached target Login Prompts. vm-test-run-wal2json> server # [ 78.328047] sshd[1043]: Server listening on 0.0.0.0 port 22. vm-test-run-wal2json> server # [ 78.343134] sshd[1043]: Server listening on :: port 22. vm-test-run-wal2json> server # [ 78.344164] systemd[1]: Started SSH Daemon. vm-test-run-wal2json> server # [ 81.219321] postgresql-pre-start[1059]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 81.229401] postgresql-pre-start[1059]: This user must also own the server process. vm-test-run-wal2json> server # [ 81.305369] postgresql-pre-start[1059]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 81.306752] postgresql-pre-start[1059]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 81.313815] postgresql-pre-start[1059]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 81.315558] postgresql-pre-start[1059]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 81.317716] postgresql-pre-start[1059]: fixing permissions on existing directory /var/lib/postgresql/15 ... ok vm-test-run-wal2json> server # [ 81.337434] postgresql-pre-start[1059]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 81.341498] postgresql-pre-start[1059]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 82.655589] postgresql-pre-start[1059]: selecting default max_connections ... 100 vm-test-run-wal2json> server # [ 83.590244] postgresql-pre-start[1059]: selecting default shared_buffers ... 128MB vm-test-run-wal2json> server # [ 85.174193] systemd-logind[668]: Watching system buttons on /dev/input/event0 (gpio-keys) vm-test-run-wal2json> server # [ 94.920810] mousedev: PS/2 mouse device common for all mice vm-test-run-wal2json> server # [ 99.339277] systemd-logind[668]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) vm-test-run-wal2json> server # [ 103.959638] postgresql-pre-start[1059]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 104.006987] postgresql-pre-start[1059]: creating configuration files ... ok vm-test-run-wal2json> server # [ 109.562944] postgresql-pre-start[1059]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 124.079133] postgresql-pre-start[1059]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 127.343029] postgresql-pre-start[1059]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 127.351899] postgresql-pre-start[1059]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 127.369772] postgresql-pre-start[1059]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 127.371715] postgresql-pre-start[1059]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 127.383500] postgresql-pre-start[1059]: /nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/bin/pg_ctl -D /var/lib/postgresql/15 -l logfile start vm-test-run-wal2json> server # [ 129.267666] postgres[1524]: [1524] LOG: starting PostgreSQL 15.20 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 129.283972] postgres[1524]: [1524] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 129.286797] postgres[1524]: [1524] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 129.308448] postgres[1524]: [1524] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 129.438734] postgres[1537]: [1537] LOG: database system was shut down at 2026-11-13 15:08:34 GMT vm-test-run-wal2json> server # [ 129.555779] postgres[1524]: [1524] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 129.698505] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 129.734064] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 132.061745] postgresql-setup-start[1577]: CREATE ROLE vm-test-run-wal2json> server # [ 132.318486] postgresql-setup-start[1579]: ALTER ROLE vm-test-run-wal2json> server # [ 132.402648] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 132.416907] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 132.419099] systemd[1]: Reached target Multi-User System. vm-test-run-wal2json> server # [ 132.437858] systemd[1]: Startup finished in 18.756s (kernel) + 1min 53.657s (userspace) = 2min 12.414s. vm-test-run-wal2json> server: (finished: waiting for unit multi-user.target, in 133.99 seconds) vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 1.59 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.57 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 15 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.53 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.69 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.76 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 15, in 1.98 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 15 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" vm-test-run-wal2json> server # [ 138.242087] sudo[1641]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 wal2json vm-test-run-wal2json> server # [ 138.415637] sudo[1641]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # pg_regress: could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 139.101102] postgres[1653]: [1653] LOG: logical decoding found consistent point at 0/153BF80 vm-test-run-wal2json> server # [ 139.105609] postgres[1653]: [1653] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 139.108021] postgres[1653]: [1653] STATEMENT: select vm-test-run-wal2json> server # [ 139.110024] postgres[1653]: 1 vm-test-run-wal2json> server # [ 139.112072] postgres[1653]: from vm-test-run-wal2json> server # [ 139.113412] postgres[1653]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 139.188243] postgres[1653]: [1653] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 139.194726] postgres[1653]: [1653] DETAIL: Streaming transactions committing after 0/153BFB8, reading WAL from 0/153BF80. vm-test-run-wal2json> server # [ 139.195643] postgres[1653]: [1653] STATEMENT: select vm-test-run-wal2json> server # [ 139.196593] postgres[1653]: data vm-test-run-wal2json> server # [ 139.211090] postgres[1653]: from vm-test-run-wal2json> server # [ 139.222309] postgres[1653]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 139.235059] postgres[1653]: 'reg_test', vm-test-run-wal2json> server # [ 139.242148] postgres[1653]: null, vm-test-run-wal2json> server # [ 139.250411] postgres[1653]: null, vm-test-run-wal2json> server # [ 139.262413] postgres[1653]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 139.271010] postgres[1653]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 139.273197] postgres[1653]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 139.275418] postgres[1653]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 139.282953] postgres[1653]: 'format-version', '2', vm-test-run-wal2json> server # [ 139.290036] postgres[1653]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 139.303004] postgres[1653]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 139.306872] postgres[1653]: ) x; vm-test-run-wal2json> server # [ 139.318732] postgres[1653]: [1653] LOG: logical decoding found consistent point at 0/153BF80 vm-test-run-wal2json> server # [ 139.323644] postgres[1653]: [1653] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 139.331028] postgres[1653]: [1653] STATEMENT: select vm-test-run-wal2json> server # [ 139.338989] postgres[1653]: data vm-test-run-wal2json> server # [ 139.348410] postgres[1653]: from vm-test-run-wal2json> server # [ 139.349703] postgres[1653]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 139.350135] postgres[1653]: 'reg_test', vm-test-run-wal2json> server # [ 139.350435] postgres[1653]: null, vm-test-run-wal2json> server # [ 139.350707] postgres[1653]: null, vm-test-run-wal2json> server # [ 139.351536] postgres[1653]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 139.351850] postgres[1653]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 139.352146] postgres[1653]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 139.352491] postgres[1653]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 139.365525] postgres[1653]: 'format-version', '2', vm-test-run-wal2json> server # [ 139.366119] postgres[1653]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 139.366590] postgres[1653]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 139.367072] postgres[1653]: ) x; vm-test-run-wal2json> server # [ 139.911991] sudo[1641]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/kgk83n6zd6qmw3x4zwbwwkx98a0d6mrg-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" , in 2.83 seconds) vm-test-run-wal2json> (using postmaster on Unix socket, default port) vm-test-run-wal2json> ============== running regression test queries ============== vm-test-run-wal2json> test wal2json ... ok 967 ms vm-test-run-wal2json> vm-test-run-wal2json> ===================== vm-test-run-wal2json> All 1 tests passed. vm-test-run-wal2json> ===================== vm-test-run-wal2json> vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 15 after extension upgrade, in 2.83 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.72 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.62 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.51 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.85 seconds) vm-test-run-wal2json> subtest: switch to postgresql 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 151.964111] nixos[1692]: switching to system configuration /nix/store/5wysm0jkv6jhg8698fqlw9nj21cr58pc-nixos-system-server-test vm-test-run-wal2json> server # [ 151.995737] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 152.049125] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 152.054056] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 152.061478] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 152.079621] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 152.102401] postgres[1524]: [1524] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 152.117414] postgres[1524]: [1524] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 152.161975] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 152.337417] postgres[1524]: [1524] LOG: background worker "logical replication launcher" (PID 1542) exited with exit code 1 vm-test-run-wal2json> server # [ 152.360217] postgres[1535]: [1535] LOG: shutting down vm-test-run-wal2json> server # [ 152.378824] postgres[1535]: [1535] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 152.687913] postgres[1535]: [1535] LOG: checkpoint complete: wrote 54 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.096 s, sync=0.113 s, total=0.334 s; sync files=48, longest=0.023 s, average=0.003 s; distance=149 kB, estimate=149 kB vm-test-run-wal2json> server # [ 152.824977] postgres[1524]: [1524] LOG: database system is shut down vm-test-run-wal2json> server # [ 152.916125] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 152.931494] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # [ 152.948629] systemd[1]: postgresql.service: Consumed 26.604s CPU time, 92M memory peak, 46.2M written to disk. vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 161.360315] systemd[1]: Reload requested from client PID 1692 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 161.379193] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 168.483737] systemd[1]: Reloading finished in 7100 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 168.973339] systemd[1]: Starting Re-setup tmpfiles on a system that is already running.... vm-test-run-wal2json> server # [ 170.537870] systemd[1]: Finished Re-setup tmpfiles on a system that is already running.. vm-test-run-wal2json> server # [ 170.545305] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 170.616691] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 171.249458] dbus-daemon[637]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 171.557549] dbus-daemon[637]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 171.567982] dbus-send[1911]: method return time=1794582562.096887 sender=org.freedesktop.DBus -> destination=:1.5 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 171.677725] dbus-daemon[637]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 171.945927] dbus-daemon[637]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 171.964009] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 172.001436] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 172.002933] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 172.074606] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 172.115294] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 172.163768] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 172.173479] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 172.306385] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 172.375723] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 172.382732] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 172.384257] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 172.386542] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 172.395838] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 172.425514] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 172.718281] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 172.729231] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 172.886458] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 174.490988] postgresql-migrate-start[1941]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 174.499335] postgresql-migrate-start[1941]: This user must also own the server process. vm-test-run-wal2json> server # [ 174.630589] postgresql-migrate-start[1941]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 174.639121] postgresql-migrate-start[1941]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 174.649815] postgresql-migrate-start[1941]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 174.654907] postgresql-migrate-start[1941]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 174.656666] postgresql-migrate-start[1941]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 174.679403] postgresql-migrate-start[1941]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 174.689433] postgresql-migrate-start[1941]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 176.171595] postgresql-migrate-start[1941]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 177.290940] postgresql-migrate-start[1941]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 180.326029] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 180.350650] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 180.364127] systemd[1]: suid-sgid-wrappers.service: Consumed 2.994s CPU time, 3.2M memory peak. vm-test-run-wal2json> server # [ 189.760793] postgresql-migrate-start[1941]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 189.795568] postgresql-migrate-start[1941]: creating configuration files ... ok vm-test-run-wal2json> server # [ 193.258097] postgresql-migrate-start[1941]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 196.021172] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:08.0/virtio7/input/input3 vm-test-run-wal2json> server # [ 203.553886] postgresql-migrate-start[1941]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 205.831973] postgresql-migrate-start[1941]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 205.833848] postgresql-migrate-start[1941]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 205.834603] postgresql-migrate-start[1941]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 205.835410] postgresql-migrate-start[1941]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 205.838460] postgresql-migrate-start[1941]: /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 207.256467] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 207.599499] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 207.611547] systemd[1]: Stopped Virtual Console Setup. vm-test-run-wal2json> server # [ 207.706770] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 213.090627] systemd[1]: Finished Virtual Console Setup. vm-test-run-wal2json> server # [ 213.540727] postgresql-migrate-start[2221]: Performing Consistency Checks vm-test-run-wal2json> server # [ 213.542345] postgresql-migrate-start[2221]: ----------------------------- vm-test-run-wal2json> server # [ 213.547285] postgresql-migrate-start[2221]: Checking cluster versions ok vm-test-run-wal2json> server # [ 215.149759] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-wal2json> server # [ 217.822775] systemd-logind[668]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-wal2json> server # [ 217.902065] postgresql-migrate-start[2221]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 217.942755] postgresql-migrate-start[2221]: Checking database connection settings ok vm-test-run-wal2json> server # [ 218.003891] postgresql-migrate-start[2221]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 218.013506] postgresql-migrate-start[2221]: Checking for contrib/isn with bigint-passing mismatch ok vm-test-run-wal2json> server # [ 218.587310] postgresql-migrate-start[2221]: Checking data type usage ok vm-test-run-wal2json> server # [ 218.747955] postgresql-migrate-start[2221]: Checking for not-null constraint inconsistencies ok vm-test-run-wal2json> server # [ 219.266712] postgresql-migrate-start[2221]: Creating dump of global objects ok vm-test-run-wal2json> server # [ 221.078810] postgresql-migrate-start[2221]: Creating dump of database schemas ok vm-test-run-wal2json> server # [ 223.020084] postgresql-migrate-start[2221]: Checking for presence of required libraries ok vm-test-run-wal2json> server # [ 223.076787] postgresql-migrate-start[2221]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 223.141244] postgresql-migrate-start[2221]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 223.144039] postgresql-migrate-start[2221]: Checking for new cluster tablespace directories ok vm-test-run-wal2json> server # [ 223.147574] postgresql-migrate-start[2221]: If pg_upgrade fails after this point, you must re-initdb the vm-test-run-wal2json> server # [ 223.155089] postgresql-migrate-start[2221]: new cluster before continuing. vm-test-run-wal2json> server # [ 223.157991] postgresql-migrate-start[2221]: Performing Upgrade vm-test-run-wal2json> server # [ 223.158452] postgresql-migrate-start[2221]: ------------------ vm-test-run-wal2json> server # [ 223.199674] postgresql-migrate-start[2221]: Setting locale and encoding for new cluster ok vm-test-run-wal2json> server # [ 225.286079] postgresql-migrate-start[2221]: Analyzing all rows in the new cluster ok vm-test-run-wal2json> server # [ 226.158590] postgresql-migrate-start[2221]: Freezing all rows in the new cluster ok vm-test-run-wal2json> server # [ 226.460898] postgresql-migrate-start[2221]: Deleting files from new pg_xact ok vm-test-run-wal2json> server # [ 226.589757] postgresql-migrate-start[2221]: Copying old pg_xact to new server ok vm-test-run-wal2json> server # [ 226.900079] postgresql-migrate-start[2221]: Setting oldest XID for new cluster ok vm-test-run-wal2json> server # [ 227.794029] postgresql-migrate-start[2221]: Setting next transaction ID and epoch for new cluster ok vm-test-run-wal2json> server # [ 227.795573] postgresql-migrate-start[2221]: Deleting files from new pg_multixact/offsets ok vm-test-run-wal2json> server # [ 227.924206] postgresql-migrate-start[2221]: Copying old pg_multixact/offsets to new server ok vm-test-run-wal2json> server # [ 227.925998] postgresql-migrate-start[2221]: Deleting files from new pg_multixact/members ok vm-test-run-wal2json> server # [ 228.048126] postgresql-migrate-start[2221]: Copying old pg_multixact/members to new server ok vm-test-run-wal2json> server # [ 228.335558] postgresql-migrate-start[2221]: Setting next multixact ID and offset for new cluster ok vm-test-run-wal2json> server # [ 228.626480] postgresql-migrate-start[2221]: Resetting WAL archives ok vm-test-run-wal2json> server # [ 230.114163] postgresql-migrate-start[2221]: Setting frozenxid and minmxid counters in new cluster ok vm-test-run-wal2json> server # [ 230.441972] postgresql-migrate-start[2221]: Restoring global objects in the new cluster ok vm-test-run-wal2json> server # [ 232.316571] postgresql-migrate-start[2221]: Restoring database schemas in the new cluster ok vm-test-run-wal2json> server # [ 232.972811] postgresql-migrate-start[2221]: Copying user relation files ok vm-test-run-wal2json> server # [ 233.266918] postgresql-migrate-start[2221]: Setting next OID for new cluster ok vm-test-run-wal2json> server # [ 234.848224] postgresql-migrate-start[2221]: Sync data directory to disk ok vm-test-run-wal2json> server # [ 234.853640] postgresql-migrate-start[2221]: Creating script to delete old cluster ok vm-test-run-wal2json> server # [ 236.867941] postgresql-migrate-start[2221]: Checking for extension updates ok vm-test-run-wal2json> server # [ 237.140786] postgresql-migrate-start[2221]: Upgrade Complete vm-test-run-wal2json> server # [ 237.142893] postgresql-migrate-start[2221]: ---------------- vm-test-run-wal2json> server # [ 237.144135] postgresql-migrate-start[2221]: Optimizer statistics are not transferred by pg_upgrade. vm-test-run-wal2json> server # [ 237.145966] postgresql-migrate-start[2221]: Once you start the new server, consider running: vm-test-run-wal2json> server # [ 237.146835] postgresql-migrate-start[2221]: /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/bin/vacuumdb --all --analyze-in-stages vm-test-run-wal2json> server # [ 237.147786] postgresql-migrate-start[2221]: Running this script will delete the old cluster's data files: vm-test-run-wal2json> server # [ 237.149261] postgresql-migrate-start[2221]: ./delete_old_cluster.sh vm-test-run-wal2json> server # [ 237.192382] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 237.239740] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 238.645565] postgres[2445]: [2445] LOG: starting PostgreSQL 17.12 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 238.651443] postgres[2445]: [2445] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 238.653796] postgres[2445]: [2445] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 238.664970] postgres[2445]: [2445] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 238.737034] postgres[2451]: [2451] LOG: database system was shut down at 2026-11-13 15:10:27 GMT vm-test-run-wal2json> server # [ 238.815988] postgres[2445]: [2445] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 238.846831] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 238.877687] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 239.641497] postgresql-setup-start[2461]: ALTER ROLE vm-test-run-wal2json> server # [ 239.684461] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 239.699413] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # the following new units were started: postgresql-migrate.service, sys-devices-platform-4010000000.pcie-pci0000:00-0000:00:0b.0-virtio9-virtio\x2dports-vport9p0.device, sys-devices-virtual-input-mice.device, sys-devices-virtual-misc-rfkill.device, sys-devices-virtual-misc-tun.device, sys-devices-virtual-mtd-mtd0ro.device, sysinit-reactivation.target, systemd-rfkill.socket, systemd-tmpfiles-resetup.service, systemd-vconsole-setup.service vm-test-run-wal2json> server # [ 239.994005] nixos[1692]: finished switching to system configuration /nix/store/5wysm0jkv6jhg8698fqlw9nj21cr58pc-nixos-system-server-test vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 0.64 seconds) vm-test-run-wal2json> server: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no' vm-test-run-wal2json> server: (finished: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no', in 0.15 seconds) vm-test-run-wal2json> (finished: subtest: switch to postgresql 17, in 98.96 seconds) vm-test-run-wal2json> subtest: Check last version of the extension after postgresql upgrade vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.34 seconds) vm-test-run-wal2json> (finished: subtest: Check last version of the extension after postgresql upgrade, in 0.34 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.30 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.32 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.30 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 17, in 0.92 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 242.399968] sudo[2487]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 242.513353] sudo[2487]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 242.963439] postgres[2494]: [2494] LOG: logical decoding found consistent point at 0/8034EC8 vm-test-run-wal2json> server # [ 242.966602] postgres[2494]: [2494] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 242.967428] postgres[2494]: [2494] STATEMENT: select vm-test-run-wal2json> server # [ 242.967809] postgres[2494]: 1 vm-test-run-wal2json> server # [ 242.968065] postgres[2494]: from vm-test-run-wal2json> server # [ 242.968317] postgres[2494]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 243.000004] postgres[2494]: [2494] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 243.001331] postgres[2494]: [2494] DETAIL: Streaming transactions committing after 0/8034F00, reading WAL from 0/8034EC8. vm-test-run-wal2json> server # [ 243.001798] postgres[2494]: [2494] STATEMENT: select vm-test-run-wal2json> server # [ 243.002275] postgres[2494]: data vm-test-run-wal2json> server # [ 243.003306] postgres[2494]: from vm-test-run-wal2json> server # [ 243.005252] postgres[2494]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 243.005642] postgres[2494]: 'reg_test', vm-test-run-wal2json> server # [ 243.007864] postgres[2494]: null, vm-test-run-wal2json> server # [ 243.008479] postgres[2494]: null, vm-test-run-wal2json> server # [ 243.009869] postgres[2494]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 243.010261] postgres[2494]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 243.010623] postgres[2494]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 243.011580] postgres[2494]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 243.012210] postgres[2494]: 'format-version', '2', vm-test-run-wal2json> server # [ 243.013265] postgres[2494]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 243.013738] postgres[2494]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 243.014133] postgres[2494]: ) x; vm-test-run-wal2json> server # [ 243.014573] postgres[2494]: [2494] LOG: logical decoding found consistent point at 0/8034EC8 vm-test-run-wal2json> server # [ 243.014891] postgres[2494]: [2494] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 243.015452] postgres[2494]: [2494] STATEMENT: select vm-test-run-wal2json> server # [ 243.015686] postgres[2494]: data vm-test-run-wal2json> server # [ 243.016220] postgres[2494]: from vm-test-run-wal2json> server # [ 243.016478] postgres[2494]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 243.018341] postgres[2494]: 'reg_test', vm-test-run-wal2json> server # [ 243.019420] postgres[2494]: null, vm-test-run-wal2json> server # [ 243.020044] postgres[2494]: null, vm-test-run-wal2json> server # [ 243.021115] postgres[2494]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 243.021428] postgres[2494]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 243.021688] postgres[2494]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 243.022086] postgres[2494]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 243.022329] postgres[2494]: 'format-version', '2', vm-test-run-wal2json> server # [ 243.022703] postgres[2494]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 243.023803] postgres[2494]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 243.025564] postgres[2494]: ) x; vm-test-run-wal2json> server # [ 243.214055] sudo[2487]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.18 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 467 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after extension upgrade, in 1.18 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.29 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.32 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.29 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 0.91 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 244.462548] sudo[2509]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 244.578787] sudo[2509]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 244.966892] postgres[2516]: [2516] LOG: logical decoding found consistent point at 0/803B4F0 vm-test-run-wal2json> server # [ 244.967777] postgres[2516]: [2516] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 244.968465] postgres[2516]: [2516] STATEMENT: select vm-test-run-wal2json> server # [ 244.969985] postgres[2516]: 1 vm-test-run-wal2json> server # [ 244.970420] postgres[2516]: from vm-test-run-wal2json> server # [ 244.971756] postgres[2516]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 245.001969] postgres[2516]: [2516] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 245.003306] postgres[2516]: [2516] DETAIL: Streaming transactions committing after 0/803B528, reading WAL from 0/803B4F0. vm-test-run-wal2json> server # [ 245.003801] postgres[2516]: [2516] STATEMENT: select vm-test-run-wal2json> server # [ 245.004385] postgres[2516]: data vm-test-run-wal2json> server # [ 245.005967] postgres[2516]: from vm-test-run-wal2json> server # [ 245.006517] postgres[2516]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 245.006977] postgres[2516]: 'reg_test', vm-test-run-wal2json> server # [ 245.008141] postgres[2516]: null, vm-test-run-wal2json> server # [ 245.008799] postgres[2516]: null, vm-test-run-wal2json> server # [ 245.010547] postgres[2516]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 245.011786] postgres[2516]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 245.012421] postgres[2516]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 245.013897] postgres[2516]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 245.014656] postgres[2516]: 'format-version', '2', vm-test-run-wal2json> server # [ 245.015335] postgres[2516]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 245.015611] postgres[2516]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 245.016116] postgres[2516]: ) x; vm-test-run-wal2json> server # [ 245.019657] postgres[2516]: [2516] LOG: logical decoding found consistent point at 0/803B4F0 vm-test-run-wal2json> server # [ 245.020375] postgres[2516]: [2516] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 245.023472] postgres[2516]: [2516] STATEMENT: select vm-test-run-wal2json> server # [ 245.024927] postgres[2516]: data vm-test-run-wal2json> server # [ 245.026009] postgres[2516]: from vm-test-run-wal2json> server # [ 245.026633] postgres[2516]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 245.028160] postgres[2516]: 'reg_test', vm-test-run-wal2json> server # [ 245.029154] postgres[2516]: null, vm-test-run-wal2json> server # [ 245.029741] postgres[2516]: null, vm-test-run-wal2json> server # [ 245.030026] postgres[2516]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 245.030314] postgres[2516]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 245.031768] postgres[2516]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 245.032187] postgres[2516]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 245.033395] postgres[2516]: 'format-version', '2', vm-test-run-wal2json> server # [ 245.033744] postgres[2516]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 245.034693] postgres[2516]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 245.035590] postgres[2516]: ) x; vm-test-run-wal2json> server # [ 245.177288] sudo[2509]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/6crwbdbvw5rn5j73hfc9wwd8xlf82p2s-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.05 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 400 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after installing the last version, in 1.05 seconds) vm-test-run-wal2json> subtest: switch to orioledb 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 250.466320] nixos[2523]: switching to system configuration /nix/store/dl6wyy7czm28nb9xs2ihjkf61lrf9vgq-nixos-system-server-test vm-test-run-wal2json> server # [ 250.481822] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 250.483322] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 250.485222] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 250.492149] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 250.502592] postgres[2445]: [2445] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 250.506126] postgres[2445]: [2445] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 250.535065] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 250.561857] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 250.583855] postgres[2445]: [2445] LOG: background worker "logical replication launcher" (PID 2454) exited with exit code 1 vm-test-run-wal2json> server # [ 250.591114] postgres[2449]: [2449] LOG: shutting down vm-test-run-wal2json> server # [ 250.599294] postgres[2449]: [2449] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 250.726974] postgres[2449]: [2449] LOG: checkpoint complete: wrote 57 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.035 s, sync=0.046 s, total=0.142 s; sync files=45, longest=0.012 s, average=0.001 s; distance=241 kB, estimate=241 kB; lsn=0/803C5C8, redo lsn=0/803C5C8 vm-test-run-wal2json> server # [ 250.759430] postgres[2445]: [2445] LOG: database system is shut down vm-test-run-wal2json> server # [ 250.807932] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 250.815503] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 250.824674] systemd[1]: postgresql.service: Consumed 2.141s CPU time, 22.3M memory peak, 272K written to disk. vm-test-run-wal2json> server # [ 250.850930] systemd[1]: postgresql-migrate.service: Deactivated successfully. vm-test-run-wal2json> server # [ 250.855828] systemd[1]: Stopped postgresql-migrate.service. vm-test-run-wal2json> server # [ 250.864687] systemd[1]: postgresql-migrate.service: Consumed 38.234s CPU time, 94.2M memory peak, 174.4M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 254.706103] systemd[1]: Reload requested from client PID 2523 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 254.708092] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 259.798556] systemd[1]: Reloading finished in 5076 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 260.136832] systemd[1]: Stopped target Reactivate sysinit units. vm-test-run-wal2json> server # [ 260.138741] systemd[1]: Stopping Reactivate sysinit units... vm-test-run-wal2json> server # [ 260.139809] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 260.179618] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 260.421084] dbus-daemon[637]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 260.558041] dbus-daemon[637]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 260.569721] dbus-send[2599]: method return time=1794582651.098951 sender=org.freedesktop.DBus -> destination=:1.7 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 260.622060] dbus-daemon[637]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 260.763697] dbus-daemon[637]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 260.773143] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 260.846565] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 260.861310] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 260.950970] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 261.129596] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 261.130882] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 261.150919] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 261.167069] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 261.209523] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 261.262542] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 261.263960] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 261.278305] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 261.289388] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 261.291069] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 261.291990] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 261.587043] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 261.599220] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 261.886982] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 264.715870] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 264.719686] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 264.725493] systemd[1]: suid-sgid-wrappers.service: Consumed 1.613s CPU time, 3.4M memory peak. vm-test-run-wal2json> server # [ 264.766318] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 265.890658] postgresql-pre-start[2682]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 265.896309] postgresql-pre-start[2682]: This user must also own the server process. vm-test-run-wal2json> server # [ 265.953880] postgresql-pre-start[2682]: Using language tag "en-US" for ICU locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 265.955291] postgresql-pre-start[2682]: The database cluster will be initialized with this locale configuration: vm-test-run-wal2json> server # [ 265.956073] postgresql-pre-start[2682]: locale provider: icu vm-test-run-wal2json> server # [ 265.957634] postgresql-pre-start[2682]: default collation: en-US vm-test-run-wal2json> server # [ 265.958972] postgresql-pre-start[2682]: LC_COLLATE: en_US.UTF-8 vm-test-run-wal2json> server # [ 265.959699] postgresql-pre-start[2682]: LC_CTYPE: en_US.UTF-8 vm-test-run-wal2json> server # [ 265.961168] postgresql-pre-start[2682]: LC_MESSAGES: en_US.UTF-8 vm-test-run-wal2json> server # [ 265.961843] postgresql-pre-start[2682]: LC_MONETARY: en_US.UTF-8 vm-test-run-wal2json> server # [ 265.962192] postgresql-pre-start[2682]: LC_NUMERIC: en_US.UTF-8 vm-test-run-wal2json> server # [ 265.962829] postgresql-pre-start[2682]: LC_TIME: en_US.UTF-8 vm-test-run-wal2json> server # [ 265.963988] postgresql-pre-start[2682]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 265.965751] postgresql-pre-start[2682]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 265.966410] postgresql-pre-start[2682]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 265.971751] postgresql-pre-start[2682]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 265.973511] postgresql-pre-start[2682]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 266.514003] postgresql-pre-start[2682]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 266.876976] postgresql-pre-start[2682]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 274.300668] postgresql-pre-start[2682]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 274.319005] postgresql-pre-start[2682]: creating configuration files ... ok vm-test-run-wal2json> server # [ 276.211256] postgresql-pre-start[2682]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 281.183553] postgresql-pre-start[2682]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 282.538721] postgresql-pre-start[2682]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 282.539988] postgresql-pre-start[2682]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 282.541355] postgresql-pre-start[2682]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 282.542995] postgresql-pre-start[2682]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 282.544526] postgresql-pre-start[2682]: /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 283.474969] postgres[2695]: [2695] LOG: registered custom resource manager "OrioleDB resource manager" with ID 129 vm-test-run-wal2json> server # [ 283.790260] postgres[2695]: [2695] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 283.839776] postgres[2695]: [2695] LOG: listening on IPv6 address "::1", port 5432 vm-test-run-wal2json> server # [ 283.841506] postgres[2695]: [2695] LOG: listening on IPv4 address "127.0.0.1", port 5432 vm-test-run-wal2json> server # [ 283.850616] postgres[2695]: [2695] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 283.917612] postgres[2701]: [2701] LOG: Cleanup of old files at startup. Checkpoint 0 vm-test-run-wal2json> server # [ 283.924095] postgres[2701]: [2701] LOG: database system was shut down at 2026-11-13 15:11:11 GMT vm-test-run-wal2json> server # [ 283.931465] postgres[2702]: [2702] LOG: orioledb background writer 0 started vm-test-run-wal2json> server # [ 284.003393] postgres[2695]: [2695] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 284.031573] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 284.068248] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 285.030510] postgresql-setup-start[2709]: CREATE EXTENSION vm-test-run-wal2json> server # [ 285.402542] postgresql-setup-start[2715]: CREATE ROLE vm-test-run-wal2json> server # [ 285.568886] postgresql-setup-start[2717]: ALTER ROLE vm-test-run-wal2json> server # [ 285.599581] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 285.612656] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 285.904236] nixos[2523]: finished switching to system configuration /nix/store/dl6wyy7czm28nb9xs2ihjkf61lrf9vgq-nixos-system-server-test vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" , in 0.29 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.28 seconds) vm-test-run-wal2json> (finished: subtest: switch to orioledb 17, in 41.31 seconds) vm-test-run-wal2json> subtest: Check upgrade path with orioledb 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.33 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.37 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.32 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with orioledb 17, in 1.01 seconds) vm-test-run-wal2json> subtest: Check pg_regress with orioledb 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" vm-test-run-wal2json> server # [ 287.891030] sudo[2740]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 wal2json vm-test-run-wal2json> server # [ 288.012091] sudo[2740]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 288.529696] postgres[2747]: [2747] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 288.531907] postgres[2747]: [2747] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 288.533293] postgres[2747]: [2747] STATEMENT: select vm-test-run-wal2json> server # [ 288.534787] postgres[2747]: 1 vm-test-run-wal2json> server # [ 288.536067] postgres[2747]: from vm-test-run-wal2json> server # [ 288.536875] postgres[2747]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 288.582670] postgres[2747]: [2747] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 288.584947] postgres[2747]: [2747] DETAIL: Streaming transactions committing after 0/15908A0, reading WAL from 0/1590850. vm-test-run-wal2json> server # [ 288.586798] postgres[2747]: [2747] STATEMENT: select vm-test-run-wal2json> server # [ 288.587393] postgres[2747]: data vm-test-run-wal2json> server # [ 288.587828] postgres[2747]: from vm-test-run-wal2json> server # [ 288.588128] postgres[2747]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 288.590058] postgres[2747]: 'reg_test', vm-test-run-wal2json> server # [ 288.590639] postgres[2747]: null, vm-test-run-wal2json> server # [ 288.590925] postgres[2747]: null, vm-test-run-wal2json> server # [ 288.591315] postgres[2747]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 288.591596] postgres[2747]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 288.591861] postgres[2747]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 288.592821] postgres[2747]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 288.594829] postgres[2747]: 'format-version', '2', vm-test-run-wal2json> server # [ 288.595335] postgres[2747]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 288.595651] postgres[2747]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 288.596545] postgres[2747]: ) x; vm-test-run-wal2json> server # [ 288.597640] postgres[2747]: [2747] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 288.598419] postgres[2747]: [2747] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 288.598880] postgres[2747]: [2747] STATEMENT: select vm-test-run-wal2json> server # [ 288.599697] postgres[2747]: data vm-test-run-wal2json> server # [ 288.600042] postgres[2747]: from vm-test-run-wal2json> server # [ 288.601113] postgres[2747]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 288.601796] postgres[2747]: 'reg_test', vm-test-run-wal2json> server # [ 288.602215] postgres[2747]: null, vm-test-run-wal2json> server # [ 288.603852] postgres[2747]: null, vm-test-run-wal2json> server # [ 288.604986] postgres[2747]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 288.605366] postgres[2747]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 288.605657] postgres[2747]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 288.605923] postgres[2747]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 288.606338] postgres[2747]: 'format-version', '2', vm-test-run-wal2json> server # [ 288.607139] postgres[2747]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 288.608142] postgres[2747]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 288.608968] postgres[2747]: ) x; vm-test-run-wal2json> server # [ 288.848158] sudo[2740]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/hndbh93pd11cbyj8jp7fbf2lz52pfy30-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/0ks4kdffckw2wy32jh6bhyl9zam1xhw6-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" , in 1.36 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 586 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with orioledb 17 after installing the last version, in 1.36 seconds) vm-test-run-wal2json> (finished: run the VM test script, in 289.95 seconds) vm-test-run-wal2json> test script finished in 290.23s vm-test-run-wal2json> cleanup vm-test-run-wal2json> kill machine (pid 9) vm-test-run-wal2json> qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/a1mjjnpfivsx5gi4rxbcr54vl6gyjfzj-python3-3.13.11/bin/python3.13) vm-test-run-wal2json> vde_switch: EOF data port: Interrupted system call vm-test-run-wal2json> kill vlan (pid 7) vm-test-run-wal2json> vde_switch: (finished: cleanup, in 0.01 seconds) vm-test-run-wal2json> Caught signal 15, cleaning up and exiting