these 2 derivations will be built: /nix/store/3i050hvvni6n4ykv90a5j2y6x9bprjbm-nixos-test-driver-wal2json.drv /nix/store/34mp2bndrkk6s1aq979c319rd5m44r5x-vm-test-run-wal2json.drv building '/nix/store/3i050hvvni6n4ykv90a5j2y6x9bprjbm-nixos-test-driver-wal2json.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/3i050hvvni6n4ykv90a5j2y6x9bprjbm-nixos-test-driver-wal2json.drv' nixos-test-driver-wal2json> Running type check (enable/disable: config.skipTypeCheck) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck nixos-test-driver-wal2json> Success: no issues found in 1 source file nixos-test-driver-wal2json> additionally exposed symbols: nixos-test-driver-wal2json> , nixos-test-driver-wal2json> , nixos-test-driver-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug nixos-test-driver-wal2json> Linting test script (enable/disable: config.skipLint) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint building '/nix/store/34mp2bndrkk6s1aq979c319rd5m44r5x-vm-test-run-wal2json.drv' on 'ssh-ng://builder@mac-linux-builder' building '/nix/store/34mp2bndrkk6s1aq979c319rd5m44r5x-vm-test-run-wal2json.drv' vm-test-run-wal2json> Machine state will be reset. To keep it, pass --keep-vm-state vm-test-run-wal2json> start all VLans vm-test-run-wal2json> start vlan vm-test-run-wal2json> running vlan (pid 7; ctl /build/vde1.ctl) vm-test-run-wal2json> (finished: start all VLans, in 0.00 seconds) vm-test-run-wal2json> Test will time out and terminate in 3600 seconds vm-test-run-wal2json> run the VM test script vm-test-run-wal2json> additionally exposed symbols: vm-test-run-wal2json> server, vm-test-run-wal2json> vlan1, vm-test-run-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug vm-test-run-wal2json> Running tests for extension: wal2json vm-test-run-wal2json> start all VMs vm-test-run-wal2json> server: starting vm vm-test-run-wal2json> mke2fs 1.47.3 (8-Jul-2025) vm-test-run-wal2json> qemu-system-aarch64: Could not access KVM kernel module: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: failed to initialize kvm: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: falling back to tcg vm-test-run-wal2json> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-wal2json> server # Formatting '/build/vm-state-server/tmp.fpmP2qf9JB', fmt=raw size=1073741824 vm-test-run-wal2json> server # Discarding device blocks: 0/262144 done vm-test-run-wal2json> server # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-wal2json> server # Filesystem UUID: 4e420818-24e8-4e3a-972d-19f727465589 vm-test-run-wal2json> server # Superblock backups stored on blocks: vm-test-run-wal2json> server # 32768, 98304, 163840, 229376 vm-test-run-wal2json> server # vm-test-run-wal2json> server # Allocating group tables: 0/8 done vm-test-run-wal2json> server # Writing inode tables: 0/8 done vm-test-run-wal2json> server # Creating journal (8192 blocks): done vm-test-run-wal2json> server # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-wal2json> server # vm-test-run-wal2json> server # Virtualisation disk image created. vm-test-run-wal2json> server: QEMU running (pid 9) vm-test-run-wal2json> (finished: start all VMs, in 0.13 seconds) vm-test-run-wal2json> server: waiting for unit multi-user.target vm-test-run-wal2json> server: waiting for the VM to finish booting vm-test-run-wal2json> server # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510] vm-test-run-wal2json> server # [ 0.000000] Linux version 6.12.63 (runner@ie-supabase-native-arm-5hdpw-2qtrh) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP Thu Dec 18 12:55:23 UTC 2025 vm-test-run-wal2json> server # [ 0.000000] KASLR enabled vm-test-run-wal2json> server # [ 0.000000] random: crng init done vm-test-run-wal2json> server # [ 0.000000] Machine model: linux,dummy-virt vm-test-run-wal2json> server # [ 0.000000] efi: UEFI not found. vm-test-run-wal2json> server # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT vm-test-run-wal2json> server # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] NODE_DATA(0) allocated [mem 0x13f602200-0x13f60593f] vm-test-run-wal2json> server # [ 0.000000] Zone ranges: vm-test-run-wal2json> server # [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] vm-test-run-wal2json> server # [ 0.000000] DMA32 empty vm-test-run-wal2json> server # [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Device empty vm-test-run-wal2json> server # [ 0.000000] Movable zone start for each node vm-test-run-wal2json> server # [ 0.000000] Early memory node ranges vm-test-run-wal2json> server # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 vm-test-run-wal2json> server # [ 0.000000] psci: probing for conduit method from DT. vm-test-run-wal2json> server # [ 0.000000] psci: PSCIv1.1 detected in firmware. vm-test-run-wal2json> server # [ 0.000000] psci: Using standard PSCI v0.2 function IDs vm-test-run-wal2json> server # [ 0.000000] psci: Trusted OS migration not required vm-test-run-wal2json> server # [ 0.000000] psci: SMC Calling Convention v1.0 vm-test-run-wal2json> server # [ 0.000000] percpu: Embedded 88 pages/cpu s180056 r65536 d114856 u360448 vm-test-run-wal2json> server # [ 0.000000] Detected PIPT I-cache on CPU0 vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: GIC system register CPU interface vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: HCRX_EL2 register vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: 52-bit Virtual Addressing (LPA2) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Spectre-v4 vm-test-run-wal2json> server # [ 0.000000] alternatives: applying boot alternatives vm-test-run-wal2json> server # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/7ms0hyly3mx8vcamb2whi985bzlisn00-nixos-system-server-test/init regInfo=/nix/store/bndawrbxn1lhjabzcasfqsl6vhijwdsv-closure-info/registration console=ttyAMA0,115200n8 console=tty0 vm-test-run-wal2json> server # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/bndawrbxn1lhjabzcasfqsl6vhijwdsv-closure-info/registration", will be passed to user space. vm-test-run-wal2json> server # [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Fallback order for Node 0: 0 vm-test-run-wal2json> server # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 vm-test-run-wal2json> server # [ 0.000000] Policy zone: Normal vm-test-run-wal2json> server # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-wal2json> server # [ 0.000000] software IO TLB: area num 2. vm-test-run-wal2json> server # [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) vm-test-run-wal2json> server # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-wal2json> server # [ 0.000000] allocated 8388608 bytes of page_ext vm-test-run-wal2json> server # [ 0.000000] ftrace: allocating 72257 entries in 283 pages vm-test-run-wal2json> server # [ 0.000000] ftrace: allocated 283 pages with 5 groups vm-test-run-wal2json> server # [ 0.000000] rcu: Hierarchical RCU implementation. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU event tracing is enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] Rude variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] Tracing variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. vm-test-run-wal2json> server # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 vm-test-run-wal2json> server # [ 0.000000] GICv3: 256 SPIs implemented vm-test-run-wal2json> server # [ 0.000000] GICv3: 0 Extended SPIs implemented vm-test-run-wal2json> server # [ 0.000000] Root IRQ handler: gic_handle_irq vm-test-run-wal2json> server # [ 0.000000] GICv3: GICv3 features: 16 PPIs vm-test-run-wal2json> server # [ 0.000000] GICv3: GICD_CTRL.DS=1, SCR_EL3.FIQ=0 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 vm-test-run-wal2json> server # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @100ae0000 (indirect, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @100af0000 (flat, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] GICv3: using LPI property table @0x0000000100b00000 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100b10000 vm-test-run-wal2json> server # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-wal2json> server # [ 0.000000] arch_timer: cp15 timer(s) running at 1000.00MHz (virt). vm-test-run-wal2json> server # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-wal2json> server # [ 0.000036] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns vm-test-run-wal2json> server # [ 0.003768] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-wal2json> server # [ 0.014543] Console: colour dummy device 80x25 vm-test-run-wal2json> server # [ 0.016144] printk: legacy console [tty0] enabled vm-test-run-wal2json> server # [ 0.022312] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) vm-test-run-wal2json> server # [ 0.022771] pid_max: default: 32768 minimum: 301 vm-test-run-wal2json> server # [ 0.024875] LSM: initializing lsm=capability,landlock,yama,bpf vm-test-run-wal2json> server # [ 0.026657] landlock: Up and running. vm-test-run-wal2json> server # [ 0.026723] Yama: becoming mindful. vm-test-run-wal2json> server # [ 0.030279] LSM support for eBPF active vm-test-run-wal2json> server # [ 0.033796] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.034191] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.065491] cacheinfo: Unable to detect cache hierarchy for CPU 0 vm-test-run-wal2json> server # [ 0.077693] rcu: Hierarchical SRCU implementation. vm-test-run-wal2json> server # [ 0.077800] rcu: Max phase no-delay instances is 1000. vm-test-run-wal2json> server # [ 0.080282] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-wal2json> server # [ 0.087380] fsl-mc MSI: its@8080000 domain created vm-test-run-wal2json> server # [ 0.089701] EFI services will not be available. vm-test-run-wal2json> server # [ 0.091557] smp: Bringing up secondary CPUs ... vm-test-run-wal2json> server # [ 0.096520] Detected PIPT I-cache on CPU1 vm-test-run-wal2json> server # [ 0.097829] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000 vm-test-run-wal2json> server # [ 0.098545] GICv3: CPU1: using allocated LPI pending table @0x0000000100b20000 vm-test-run-wal2json> server # [ 0.100213] CPU1: Booted secondary processor 0x0000000001 [0x000f0510] vm-test-run-wal2json> server # [ 0.103939] smp: Brought up 1 node, 2 CPUs vm-test-run-wal2json> server # [ 0.104094] SMP: Total of 2 processors activated. vm-test-run-wal2json> server # [ 0.104140] CPU: All CPU(s) started at EL1 vm-test-run-wal2json> server # [ 0.104315] CPU features: detected: Branch Target Identification vm-test-run-wal2json> server # [ 0.104373] CPU features: detected: 32-bit EL0 Support vm-test-run-wal2json> server # [ 0.104407] CPU features: detected: 32-bit EL1 Support vm-test-run-wal2json> server # [ 0.104430] CPU features: detected: ARMv8.4 Translation Table Level vm-test-run-wal2json> server # [ 0.104460] CPU features: detected: Instruction cache invalidation not required for I/D coherence vm-test-run-wal2json> server # [ 0.104501] CPU features: detected: Data cache clean to the PoU not required for I/D coherence vm-test-run-wal2json> server # [ 0.104568] CPU features: detected: Common not Private translations vm-test-run-wal2json> server # [ 0.104597] CPU features: detected: CRC32 instructions vm-test-run-wal2json> server # [ 0.104621] CPU features: detected: Data cache clean to Point of Deep Persistence vm-test-run-wal2json> server # [ 0.104653] CPU features: detected: Data cache clean to Point of Persistence vm-test-run-wal2json> server # [ 0.104681] CPU features: detected: Data independent timing control (DIT) vm-test-run-wal2json> server # [ 0.104709] CPU features: detected: E0PD vm-test-run-wal2json> server # [ 0.104730] CPU features: detected: Enhanced Counter Virtualization vm-test-run-wal2json> server # [ 0.104753] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) vm-test-run-wal2json> server # [ 0.104779] CPU features: detected: Enhanced Privileged Access Never vm-test-run-wal2json> server # [ 0.104806] CPU features: detected: Enhanced Virtualization Traps vm-test-run-wal2json> server # [ 0.104859] CPU features: detected: Fine Grained Traps vm-test-run-wal2json> server # [ 0.104923] CPU features: detected: Generic authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.105011] CPU features: detected: RCpc load-acquire (LDAPR) vm-test-run-wal2json> server # [ 0.105061] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2) vm-test-run-wal2json> server # [ 0.105092] CPU features: detected: LSE atomic instructions vm-test-run-wal2json> server # [ 0.105115] CPU features: detected: Memory Copy and Memory Set instructions vm-test-run-wal2json> server # [ 0.105140] CPU features: detected: Privileged Access Never vm-test-run-wal2json> server # [ 0.105162] CPU features: detected: RAS Extension Support vm-test-run-wal2json> server # [ 0.105183] CPU features: detected: Random Number Generator vm-test-run-wal2json> server # [ 0.105208] CPU features: detected: Speculation barrier (SB) vm-test-run-wal2json> server # [ 0.105233] CPU features: detected: Stage-2 Force Write-Back vm-test-run-wal2json> server # [ 0.105260] CPU features: detected: Trap EL0 IMPLEMENTATION DEFINED functionality vm-test-run-wal2json> server # [ 0.105290] CPU features: detected: TLB range maintenance instructions vm-test-run-wal2json> server # [ 0.105318] CPU features: detected: WFx with timeout vm-test-run-wal2json> server # [ 0.105364] CPU features: detected: Speculative Store Bypassing Safe (SSBS) vm-test-run-wal2json> server # [ 0.105394] CPU features: detected: Scalable Vector Extension vm-test-run-wal2json> server # [ 0.111853] alternatives: applying system-wide alternatives vm-test-run-wal2json> server # [ 0.129312] CPU features: detected: Hardware dirty bit management on CPU0-1 vm-test-run-wal2json> server # [ 0.130183] SVE: maximum available vector length 256 bytes per vector vm-test-run-wal2json> server # [ 0.130278] SVE: default vector length 64 bytes per vector vm-test-run-wal2json> server # [ 0.144387] Memory: 3922844K/4194304K available (23296K kernel code, 6546K rwdata, 24596K rodata, 4416K init, 1047K bss, 223164K reserved, 32768K cma-reserved) vm-test-run-wal2json> server # [ 0.166927] devtmpfs: initialized vm-test-run-wal2json> server # [ 0.195754] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns vm-test-run-wal2json> server # [ 0.196278] futex hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.199197] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL vm-test-run-wal2json> server # [ 0.199268] 0 pages in range for non-PLT usage vm-test-run-wal2json> server # [ 0.199316] 509248 pages in range for PLT usage vm-test-run-wal2json> server # [ 0.202012] pinctrl core: initialized pinctrl subsystem vm-test-run-wal2json> server # [ 0.212423] DMI not present or invalid. vm-test-run-wal2json> server # [ 0.233797] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-wal2json> server # [ 0.246510] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations vm-test-run-wal2json> server # [ 0.247872] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-wal2json> server # [ 0.249388] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-wal2json> server # [ 0.249702] audit: initializing netlink subsys (disabled) vm-test-run-wal2json> server # [ 0.251969] audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1 vm-test-run-wal2json> server # [ 0.258285] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-wal2json> server # [ 0.258345] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-wal2json> server # [ 0.258408] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-wal2json> server # [ 0.258440] thermal_sys: Registered thermal governor 'user_space' vm-test-run-wal2json> server # [ 0.258467] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-wal2json> server # [ 0.259283] cpuidle: using governor ladder vm-test-run-wal2json> server # [ 0.259838] cpuidle: using governor menu vm-test-run-wal2json> server # [ 0.262087] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. vm-test-run-wal2json> server # [ 0.263224] ASID allocator initialised with 65536 entries vm-test-run-wal2json> server # [ 0.270776] Serial: AMBA PL011 UART driver vm-test-run-wal2json> server # [ 0.320131] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 vm-test-run-wal2json> server # [ 0.321705] printk: legacy console [ttyAMA0] enabled vm-test-run-wal2json> server # [ 0.355926] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.356637] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-wal2json> server # [ 0.356900] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.357019] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page vm-test-run-wal2json> server # [ 0.357231] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.357329] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-wal2json> server # [ 0.357426] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.357522] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page vm-test-run-wal2json> server # [ 0.370750] fbcon: Taking over console vm-test-run-wal2json> server # [ 0.371326] ACPI: Interpreter disabled. vm-test-run-wal2json> server # [ 0.378543] iommu: Default domain type: Translated vm-test-run-wal2json> server # [ 0.378942] iommu: DMA domain TLB invalidation policy: strict mode vm-test-run-wal2json> server # [ 0.384753] SCSI subsystem initialized vm-test-run-wal2json> server # [ 0.387086] usbcore: registered new interface driver usbfs vm-test-run-wal2json> server # [ 0.387705] usbcore: registered new interface driver hub vm-test-run-wal2json> server # [ 0.387983] usbcore: registered new device driver usb vm-test-run-wal2json> server # [ 0.390285] pps_core: LinuxPPS API ver. 1 registered vm-test-run-wal2json> server # [ 0.390391] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti vm-test-run-wal2json> server # [ 0.390592] PTP clock support registered vm-test-run-wal2json> server # [ 0.390988] EDAC MC: Ver: 3.0.0 vm-test-run-wal2json> server # [ 0.393064] scmi_core: SCMI protocol bus registered vm-test-run-wal2json> server # [ 0.395811] FPGA manager framework vm-test-run-wal2json> server # [ 0.397435] Advanced Linux Sound Architecture Driver Initialized. vm-test-run-wal2json> server # [ 0.407654] vgaarb: loaded vm-test-run-wal2json> server # [ 0.411649] clocksource: Switched to clocksource arch_sys_counter vm-test-run-wal2json> server # [ 0.416619] VFS: Disk quotas dquot_6.6.0 vm-test-run-wal2json> server # [ 0.417040] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-wal2json> server # [ 0.418685] netfs: FS-Cache loaded vm-test-run-wal2json> server # [ 0.419791] pnp: PnP ACPI: disabled vm-test-run-wal2json> server # [ 0.446114] NET: Registered PF_INET protocol family vm-test-run-wal2json> server # [ 0.447700] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-wal2json> server # [ 0.564037] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.564425] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.565201] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.566127] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) vm-test-run-wal2json> server # [ 0.566991] TCP: Hash tables configured (established 32768 bind 32768) vm-test-run-wal2json> server # [ 0.568731] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear) vm-test-run-wal2json> server # [ 0.569464] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.570052] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.571836] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-wal2json> server # [ 0.572365] NET: Registered PF_XDP protocol family vm-test-run-wal2json> server # [ 0.573108] PCI: CLS 0 bytes, default 64 vm-test-run-wal2json> server # [ 0.575661] kvm [1]: HYP mode not available vm-test-run-wal2json> server # [ 0.577693] Trying to unpack rootfs image as initramfs... vm-test-run-wal2json> server # [ 0.691933] Initialise system trusted keyrings vm-test-run-wal2json> server # [ 0.693644] workingset: timestamp_bits=42 max_order=20 bucket_order=0 vm-test-run-wal2json> server # [ 0.698346] squashfs: version 4.0 (2009/01/31) Phillip Lougher vm-test-run-wal2json> server # [ 0.699013] 9p: Installing v9fs 9p2000 file system support vm-test-run-wal2json> server # [ 0.762288] Key type asymmetric registered vm-test-run-wal2json> server # [ 0.762538] Asymmetric key parser 'x509' registered vm-test-run-wal2json> server # [ 0.762963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) vm-test-run-wal2json> server # [ 0.765119] io scheduler mq-deadline registered vm-test-run-wal2json> server # [ 0.765291] io scheduler kyber registered vm-test-run-wal2json> server # [ 0.792978] pl061_gpio 9030000.pl061: PL061 GPIO chip registered vm-test-run-wal2json> server # [ 0.798268] ledtrig-cpu: registered to indicate activity on CPUs vm-test-run-wal2json> server # [ 0.802007] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: vm-test-run-wal2json> server # [ 0.802773] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 vm-test-run-wal2json> server # [ 0.804125] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 vm-test-run-wal2json> server # [ 0.804705] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 vm-test-run-wal2json> server # [ 0.805492] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits vm-test-run-wal2json> server # [ 0.806165] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] vm-test-run-wal2json> server # [ 0.808288] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 vm-test-run-wal2json> server # [ 0.808756] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-wal2json> server # [ 0.809049] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.809471] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.809733] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.811215] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.815211] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.816318] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.816573] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.816749] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.816992] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.817660] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.818261] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.818409] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.818526] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.819139] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.819303] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.819403] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.819713] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.821276] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.821467] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.821582] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.821692] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.822144] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.822360] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.822535] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.822650] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.823148] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.823319] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] vm-test-run-wal2json> server # [ 0.823422] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.823533] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.824898] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.825326] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.825448] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.825576] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.825696] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.826227] pci 0000:00:08.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.826370] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.826486] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.826934] pci 0000:00:09.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.827082] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.827198] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.828346] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.828522] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.829103] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.829836] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.829949] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.830117] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.830610] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.830776] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.831011] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.831450] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.834770] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned vm-test-run-wal2json> server # [ 0.835063] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned vm-test-run-wal2json> server # [ 0.835258] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.835787] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.835956] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.836106] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.836491] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.837308] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.837457] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.838040] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.838180] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.838613] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.839255] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.839719] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned vm-test-run-wal2json> server # [ 0.840117] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned vm-test-run-wal2json> server # [ 0.840232] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned vm-test-run-wal2json> server # [ 0.840357] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned vm-test-run-wal2json> server # [ 0.840475] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned vm-test-run-wal2json> server # [ 0.840722] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned vm-test-run-wal2json> server # [ 0.840909] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned vm-test-run-wal2json> server # [ 0.841044] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned vm-test-run-wal2json> server # [ 0.841158] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned vm-test-run-wal2json> server # [ 0.841266] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned vm-test-run-wal2json> server # [ 0.841375] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned vm-test-run-wal2json> server # [ 0.841491] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned vm-test-run-wal2json> server # [ 0.841605] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned vm-test-run-wal2json> server # [ 0.841728] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned vm-test-run-wal2json> server # [ 0.842060] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned vm-test-run-wal2json> server # [ 0.842176] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned vm-test-run-wal2json> server # [ 0.842291] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned vm-test-run-wal2json> server # [ 0.842396] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned vm-test-run-wal2json> server # [ 0.842497] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned vm-test-run-wal2json> server # [ 0.842599] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned vm-test-run-wal2json> server # [ 0.842699] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned vm-test-run-wal2json> server # [ 0.843154] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.843270] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.843384] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.845163] pci 0000:00:0a.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.904482] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.908542] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.910847] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.913011] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.915298] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.918165] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.919646] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.921910] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.923079] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.925781] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.928566] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.945361] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-wal2json> server # [ 0.954817] msm_serial: driver initialized vm-test-run-wal2json> server # [ 0.956035] SuperH (H)SCI(F) driver initialized vm-test-run-wal2json> server # [ 0.956653] STM32 USART driver initialized vm-test-run-wal2json> server # [ 1.012689] loop: module loaded vm-test-run-wal2json> server # [ 1.013808] virtio_blk virtio5: 2/0/0 default/read/poll queues vm-test-run-wal2json> server # [ 1.017859] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-wal2json> server # [ 1.031273] megasas: 07.727.03.00-rc1 vm-test-run-wal2json> server # [ 1.034628] Freeing initrd memory: 10684K vm-test-run-wal2json> server # [ 1.037689] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] vm-test-run-wal2json> server # [ 1.039792] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.041673] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.042895] Using buffer write method vm-test-run-wal2json> server # [ 1.043529] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] vm-test-run-wal2json> server # [ 1.045646] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.046166] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.048318] Using buffer write method vm-test-run-wal2json> server # [ 1.048560] Concatenating MTD devices: vm-test-run-wal2json> server # [ 1.048648] (0): "0.flash" vm-test-run-wal2json> server # [ 1.048711] (1): "0.flash" vm-test-run-wal2json> server # [ 1.048768] into device "0.flash" vm-test-run-wal2json> server # [ 1.074906] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-wal2json> server # [ 1.089202] thunder_xcv, ver 1.0 vm-test-run-wal2json> server # [ 1.089472] thunder_bgx, ver 1.0 vm-test-run-wal2json> server # [ 1.089666] nicpf, ver 1.0 vm-test-run-wal2json> server # [ 1.093095] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version vm-test-run-wal2json> server # [ 1.093297] hns3: Copyright (c) 2017 Huawei Corporation. vm-test-run-wal2json> server # [ 1.093754] hclge is initializing vm-test-run-wal2json> server # [ 1.093996] e1000: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.094281] e1000: Copyright (c) 1999-2006 Intel Corporation. vm-test-run-wal2json> server # [ 1.094543] e1000e: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.094637] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. vm-test-run-wal2json> server # [ 1.094850] igb: Intel(R) Gigabit Ethernet Network Driver vm-test-run-wal2json> server # [ 1.094943] igb: Copyright (c) 2007-2014 Intel Corporation. vm-test-run-wal2json> server # [ 1.095158] igbvf: Intel(R) Gigabit Virtual Function Network Driver vm-test-run-wal2json> server # [ 1.095261] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. vm-test-run-wal2json> server # [ 1.096647] sky2: driver version 1.30 vm-test-run-wal2json> server # [ 1.105678] ehci-pci 0000:00:0a.0: EHCI Host Controller vm-test-run-wal2json> server # [ 1.106252] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 vm-test-run-wal2json> server # [ 1.107031] usbcore: registered new interface driver usb-storage vm-test-run-wal2json> server # [ 1.107779] usbcore: registered new interface driver usbserial_generic vm-test-run-wal2json> server # [ 1.108631] usbserial: USB Serial support registered for generic vm-test-run-wal2json> server # [ 1.110976] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 vm-test-run-wal2json> server # [ 1.119107] rtc-pl031 9010000.pl031: registered as rtc0 vm-test-run-wal2json> server # [ 1.120599] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 vm-test-run-wal2json> server # [ 1.120459] rtc-pl031 9010000.pl031: setting system clock to 2026-11-12T09:30:37 UTC (1794475837) vm-test-run-wal2json> server # [ 1.122581] i2c_dev: i2c /dev entries driver vm-test-run-wal2json> server # [ 1.128302] hub 1-0:1.0: USB hub found vm-test-run-wal2json> server # [ 1.129259] hub 1-0:1.0: 6 ports detected vm-test-run-wal2json> server # [ 1.138324] sdhci: Secure Digital Host Controller Interface driver vm-test-run-wal2json> server # [ 1.138544] sdhci: Copyright(c) Pierre Ossman vm-test-run-wal2json> server # [ 1.140369] Synopsys Designware Multimedia Card Interface Driver vm-test-run-wal2json> server # [ 1.142335] sdhci-pltfm: SDHCI platform and OF driver helper vm-test-run-wal2json> server # [ 1.149736] hid: raw HID events driver (C) Jiri Kosina vm-test-run-wal2json> server # [ 1.151517] usbcore: registered new interface driver usbhid vm-test-run-wal2json> server # [ 1.151771] usbhid: USB HID core driver vm-test-run-wal2json> server # [ 1.160774] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available vm-test-run-wal2json> server # [ 1.174441] drop_monitor: Initializing network drop monitor service vm-test-run-wal2json> server # [ 1.176119] NET: Registered PF_INET6 protocol family vm-test-run-wal2json> server # [ 1.191145] Segment Routing with IPv6 vm-test-run-wal2json> server # [ 1.191510] In-situ OAM (IOAM) with IPv6 vm-test-run-wal2json> server # [ 1.192925] NET: Registered PF_PACKET protocol family vm-test-run-wal2json> server # [ 1.194389] 9pnet: Installing 9P2000 support vm-test-run-wal2json> server # [ 1.198324] Key type dns_resolver registered vm-test-run-wal2json> server # [ 1.235595] registered taskstats version 1 vm-test-run-wal2json> server # [ 1.238777] Loading compiled-in X.509 certificates vm-test-run-wal2json> server # [ 1.298405] Demotion targets for Node 0: null vm-test-run-wal2json> server # [ 1.300998] Key type .fscrypt registered vm-test-run-wal2json> server # [ 1.301139] Key type fscrypt-provisioning registered vm-test-run-wal2json> server # [ 1.309976] input: gpio-keys as /devices/platform/gpio-keys/input/input0 vm-test-run-wal2json> server # [ 1.356323] clk: Disabling unused clocks vm-test-run-wal2json> server # [ 1.356620] PM: genpd: Disabling unused power domains vm-test-run-wal2json> server # [ 1.357070] ALSA device list: vm-test-run-wal2json> server # [ 1.357203] No soundcards found. vm-test-run-wal2json> server # [ 1.438651] Freeing unused kernel memory: 4416K vm-test-run-wal2json> server # [ 1.440270] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-wal2json> server # [ 1.441368] Run /init as init process vm-test-run-wal2json> server # [ 1.627438] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 vm-test-run-wal2json> server # [ 1.761484] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 vm-test-run-wal2json> server # [ 1.892168] usb 1-2: new high-speed USB device number 3 using ehci-pci vm-test-run-wal2json> server # [ 1.973913] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev vm-test-run-wal2json> server # [ 2.069181] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 vm-test-run-wal2json> server # [ 2.070811] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 vm-test-run-wal2json> server # [ 2.095547] [drm] pci: virtio-gpu-pci detected at 0000:00:09.0 vm-test-run-wal2json> server # [ 2.096221] [drm] features: -virgl +edid -resource_blob -host_visible vm-test-run-wal2json> server # [ 2.096245] [drm] features: -context_init vm-test-run-wal2json> server # [ 2.099503] [drm] number of scanouts: 1 vm-test-run-wal2json> server # [ 2.099655] [drm] number of cap sets: 0 vm-test-run-wal2json> server # [ 2.110072] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:09.0 on minor 0 vm-test-run-wal2json> server # [ 2.141226] Console: switching to colour frame buffer device 160x50 vm-test-run-wal2json> server # [ 2.152395] virtio-pci 0000:00:09.0: [drm] fb0: virtio_gpudrmfb frame buffer device vm-test-run-wal2json> server # [ 4.628932] EXT4-fs (vda): mounted filesystem 4e420818-24e8-4e3a-972d-19f727465589 r/w with ordered data mode. Quota mode: none. vm-test-run-wal2json> server # [ 6.645480] EXT4-fs (vda): re-mounted 4e420818-24e8-4e3a-972d-19f727465589. vm-test-run-wal2json> server # [ 6.661859] booting system configuration /nix/store/7ms0hyly3mx8vcamb2whi985bzlisn00-nixos-system-server-test vm-test-run-wal2json> server # [ 19.185105] systemd[1]: systemd 258.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) vm-test-run-wal2json> server # [ 19.194962] systemd[1]: Detected virtualization qemu. vm-test-run-wal2json> server # [ 19.199285] systemd[1]: Detected architecture arm64. vm-test-run-wal2json> server # [ 19.204343] systemd[1]: Detected first boot. vm-test-run-wal2json> server # [ 19.227040] systemd[1]: Initializing machine ID from random generator. vm-test-run-wal2json> server # [ 19.255112] systemd[1]: Hostname set to . vm-test-run-wal2json> server # [ 20.490460] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-wal2json> server # [ 21.960394] NET: Registered PF_VSOCK protocol family vm-test-run-wal2json> server # [ 21.994523] Guest personality initialized and is inactive vm-test-run-wal2json> server # [ 22.000611] VMCI host device registered (name=vmci, major=10, minor=261) vm-test-run-wal2json> server # [ 22.003375] Initialized host personality vm-test-run-wal2json> server # [ 22.230737] systemd[1]: Applying preset policy. vm-test-run-wal2json> server # [ 26.211335] systemd[1]: Populated /etc with preset unit settings. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 30.131352] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-wal2json> server # [ 30.362699] systemd[1]: Created slice Slice /system/getty. vm-test-run-wal2json> server # [ 30.378359] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-wal2json> server # [ 30.390776] systemd[1]: Created slice User and Session Slice. vm-test-run-wal2json> server # [ 30.400258] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-wal2json> server # [ 30.406234] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-wal2json> server # [ 30.413443] systemd[1]: Expecting device /dev/hvc0... vm-test-run-wal2json> server # [ 30.418490] systemd[1]: Expecting device /dev/ttyAMA0... vm-test-run-wal2json> server # [ 30.423261] systemd[1]: Expecting device /sys/subsystem/net/devices/eth1... vm-test-run-wal2json> server # [ 30.428506] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-wal2json> server # [ 30.432947] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-wal2json> server # [ 30.437230] systemd[1]: Reached target Path Units. vm-test-run-wal2json> server # [ 30.441324] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 30.446465] systemd[1]: Reached target Slice Units. vm-test-run-wal2json> server # [ 30.451130] systemd[1]: Reached target Swaps. vm-test-run-wal2json> server # [ 30.489963] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-wal2json> server # [ 30.514536] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-wal2json> server # [ 30.526668] systemd[1]: Listening on Journal Audit Socket. vm-test-run-wal2json> server # [ 30.533948] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-wal2json> server # [ 30.540414] systemd[1]: Listening on Journal Sockets. vm-test-run-wal2json> server # [ 30.548879] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-wal2json> server # [ 30.553280] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 30.559403] systemd[1]: Listening on udev Control Socket. vm-test-run-wal2json> server # [ 30.565709] systemd[1]: Listening on udev Kernel Socket. vm-test-run-wal2json> server # [ 30.615190] systemd[1]: Mounting Huge Pages File System... vm-test-run-wal2json> server # [ 30.658227] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-wal2json> server # [ 30.715764] systemd[1]: Mounting Kernel Debug File System... vm-test-run-wal2json> server # [ 30.773706] systemd[1]: Mounting Kernel Trace File System... vm-test-run-wal2json> server # [ 30.910110] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-wal2json> server # [ 31.051280] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-wal2json> server # [ 31.060728] systemd[1]: Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs). vm-test-run-wal2json> server # [ 31.206855] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-wal2json> server # [ 31.233492] systemd[1]: Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm). vm-test-run-wal2json> server # [ 31.249367] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 31.396811] systemd[1]: Starting Load Kernel Module fuse... vm-test-run-wal2json> server # [ 31.408738] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 31.426479] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 31.562261] systemd[1]: Starting Journal Service... vm-test-run-wal2json> server # [ 31.665549] systemd[1]: Starting Load Kernel Modules... vm-test-run-wal2json> server # [ 31.747063] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-wal2json> server # [ 31.818568] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-wal2json> server # [ 31.834393] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 31.901833] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-wal2json> server # [ 31.979700] systemd[1]: Mounted Huge Pages File System. vm-test-run-wal2json> server # [ 31.990063] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-wal2json> server # [ 32.005714] systemd[1]: Mounted Kernel Debug File System. vm-test-run-wal2json> server # [ 32.016932] systemd[1]: Mounted Kernel Trace File System. vm-test-run-wal2json> server # [ 32.048469] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-wal2json> server # [ 32.066842] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-wal2json> server # [ 32.130420] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-wal2json> server # [ 32.473355] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-wal2json> server # [ 32.509788] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-wal2json> server # [ 33.095222] fuse: init (API version 7.41) vm-test-run-wal2json> server # [ 33.115322] systemd[1]: Finished Load Kernel Modules. vm-test-run-wal2json> server # [ 33.179186] systemd[1]: Starting Firewall... vm-test-run-wal2json> server # [ 33.248460] systemd[1]: Starting Apply Kernel Variables... vm-test-run-wal2json> server # [ 33.264583] systemd[1]: modprobe@fuse.service: Deactivated successfully. vm-test-run-wal2json> server # [ 33.276982] systemd[1]: Finished Load Kernel Module fuse. vm-test-run-wal2json> server # [ 33.286728] EXT4-fs (vda): re-mounted 4e420818-24e8-4e3a-972d-19f727465589. vm-test-run-wal2json> server # [ 33.336539] systemd[1]: Mounting FUSE Control File System... vm-test-run-wal2json> server # [ 33.530014] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-wal2json> server # [ 33.539025] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 33.654933] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-wal2json> server # [ 33.664776] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 33.697304] systemd[1]: Mounted FUSE Control File System. vm-test-run-wal2json> server # [ 33.774305] systemd-journald[398]: Collecting audit messages is enabled. vm-test-run-wal2json> server # [ 34.655852] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-wal2json> server # [ 34.703252] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-wal2json> server # [ 34.717277] systemd[1]: Reached target First Boot Complete. vm-test-run-wal2json> server # [ 34.775336] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-wal2json> server # [ 35.094023] systemd[1]: Finished Apply Kernel Variables. vm-test-run-wal2json> server # [ 35.173596] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-wal2json> server # [ 36.062823] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-wal2json> server # [ 36.098328] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-wal2json> server # [ 36.156500] systemd[1]: Mounting /run/wrappers... vm-test-run-wal2json> server # [ 36.214312] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-wal2json> server # [ 36.656985] systemd[1]: Mounted /run/wrappers. vm-test-run-wal2json> server # [ 36.666866] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 36.705473] systemd[1]: Listening on Boot Entries Service Socket. vm-test-run-wal2json> server # [ 36.765827] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 36.777026] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 36.841394] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-wal2json> server # [ 37.094022] systemd[1]: Started Journal Service. vm-test-run-wal2json> server # [ 37.026847] systemd-modules-load[399]: Module 'atkbd' is built in vm-test-run-wal2json> server # [ 37.054285] systemd-modules-load[399]: Module 'loop' is built in vm-test-run-wal2json> server # [ 37.128032] systemd-oomd[400]: No swap; memory pressure usage will be degraded vm-test-run-wal2json> server # [ 37.202307] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-wal2json> server # [ 37.859620] systemd-udevd[427]: Using default interface naming scheme 'v258'. vm-test-run-wal2json> server # [ 37.913399] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-wal2json> server # [ 37.969246] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-wal2json> server # [ 38.165319] systemd-journald[398]: Received client request to flush runtime journal. vm-test-run-wal2json> server # [ 38.783034] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-wal2json> server # [ 38.842510] systemd[1]: Starting Create System Files and Directories... vm-test-run-wal2json> server # [ 40.507063] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-wal2json> server # [ 41.117781] systemd[1]: Finished Create System Files and Directories. vm-test-run-wal2json> server # [ 41.271046] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-wal2json> server # [ 41.344052] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-wal2json> server # [ 42.523647] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-wal2json> server # [ 43.560820] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-wal2json> server # [ 43.615899] systemd[1]: Starting Update is Completed... vm-test-run-wal2json> server # [ 44.394749] systemd[1]: Finished Update is Completed. vm-test-run-wal2json> server # [ 48.310067] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 48.319317] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 48.326674] systemd[1]: suid-sgid-wrappers.service: Consumed 3.060s CPU time, 5.6M memory peak. vm-test-run-wal2json> server # [ 51.464266] systemd[1]: Finished Firewall. vm-test-run-wal2json> server # [ 53.305527] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-wal2json> server # [ 53.315558] systemd[1]: Reached target System Initialization. vm-test-run-wal2json> server # [ 53.322883] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-wal2json> server # [ 53.330756] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-wal2json> server # [ 53.357554] systemd[1]: Reached target Timer Units. vm-test-run-wal2json> server # [ 53.359138] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-wal2json> server # [ 53.370298] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-wal2json> server # [ 53.381452] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-wal2json> server # [ 53.424938] systemd[1]: Starting OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK)... vm-test-run-wal2json> server # [ 53.427297] systemd[1]: Listening on Hostname Service Socket. vm-test-run-wal2json> server # [ 53.604112] (sh-issue)[634]: sshd-vsock.socket: Unable to locate executable '/usr/lib/systemd/systemd-ssh-issue': No such file or directory vm-test-run-wal2json> server # [ 53.634729] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK). vm-test-run-wal2json> server # [ 53.642749] systemd[1]: Reached target Socket Units. vm-test-run-wal2json> server # [ 53.656604] systemd[1]: Reached target Basic System. vm-test-run-wal2json> server # [ 53.689182] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-wal2json> server # [ 53.730895] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-wal2json> server # [ 53.793935] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 53.863098] systemd[1]: Started Reset console on configuration changes. vm-test-run-wal2json> server # [ 53.922062] systemd[1]: Starting resolvconf update... vm-test-run-wal2json> server # [ 53.975970] systemd[1]: Starting SSH Host Keys Generation... vm-test-run-wal2json> server # [ 55.293523] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-wal2json> server # [ 55.794524] dbus-daemon[636]: dbus[636]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 55.814902] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 55.835136] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 55.841340] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 55.894750] nsncd[638]: Nov 12 09:31:32.186 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 55.921033] systemd[1]: Starting User Login Management... vm-test-run-wal2json> server # [ 56.682171] systemd[1]: Started D-Bus System Message Bus. vm-test-run-wal2json> server # [ 57.841849] systemd-logind[664]: New seat seat0. vm-test-run-wal2json> server # [ 57.907398] systemd[1]: Started User Login Management. vm-test-run-wal2json> server # [ 57.969341] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 58.205744] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 58.218098] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-wal2json> server # [ 58.231018] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-wal2json> server # [ 58.240994] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-wal2json> server # [ 58.258063] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 58.285226] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-wal2json> server # [ 58.294496] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 58.447106] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 58.752162] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 58.790158] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 59.397546] nsncd[716]: Nov 12 09:31:35.844 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 59.411965] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 59.422472] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 59.428425] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 60.012999] systemd[1]: Finished resolvconf update. vm-test-run-wal2json> server # [ 60.032528] systemd[1]: Reached target Preparation for Network. vm-test-run-wal2json> server # [ 60.081136] systemd[1]: Starting DHCP Client... vm-test-run-wal2json> server # [ 62.019985] dhcpcd[761]: dhcpcd-10.2.4 starting vm-test-run-wal2json> server # [ 62.133979] dhcpcd[776]: dev: loaded udev vm-test-run-wal2json> server # [ 62.511379] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-wal2json> server # [ 62.993610] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-wal2json> server # [ 63.286187] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-wal2json> server # [ 63.295879] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-wal2json> server # [ 63.325986] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 vm-test-run-wal2json> server # [ 63.332071] cfg80211: failed to load regulatory.db vm-test-run-wal2json> server # [ 64.399126] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-wal2json> server # [ 64.339002] dhcpcd[776]: eth0: waiting for carrier vm-test-run-wal2json> server # [ 64.352107] dhcpcd[776]: eth0: carrier acquired vm-test-run-wal2json> server # [ 64.515915] sshd-keygen-start[660]: Generating public/private rsa key pair. vm-test-run-wal2json> server # [ 64.524965] sshd-keygen-start[660]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key vm-test-run-wal2json> server # [ 64.551402] sshd-keygen-start[660]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub vm-test-run-wal2json> server # [ 64.562881] sshd-keygen-start[660]: The key fingerprint is: vm-test-run-wal2json> server # [ 64.576091] sshd-keygen-start[660]: SHA256:5k/8oYvLTNkzO17hakSgsm1nmD615DoDuUMNHSv6MUo root@server vm-test-run-wal2json> server # [ 64.584077] sshd-keygen-start[660]: The key's randomart image is: vm-test-run-wal2json> server # [ 64.590259] sshd-keygen-start[660]: +---[RSA 4096]----+ vm-test-run-wal2json> server # [ 64.591237] sshd-keygen-start[660]: | | vm-test-run-wal2json> server # [ 64.591974] sshd-keygen-start[660]: | . . | vm-test-run-wal2json> server # [ 64.601761] sshd-keygen-start[660]: | . + . | vm-test-run-wal2json> server # [ 64.621132] sshd-keygen-start[660]: | + + . | vm-test-run-wal2json> server # [ 64.623763] sshd-keygen-start[660]: | . O oS. . | vm-test-run-wal2json> server # [ 64.626093] sshd-keygen-start[660]: | E B *o=+.. . | vm-test-run-wal2json> server # [ 64.627944] sshd-keygen-start[660]: | . + B *+o* + | vm-test-run-wal2json> server # [ 64.633447] sshd-keygen-start[660]: | . + =+o+oO . | vm-test-run-wal2json> server # [ 64.636018] sshd-keygen-start[660]: | ..==+Bo. | vm-test-run-wal2json> server # [ 64.638731] sshd-keygen-start[660]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 64.643262] dhcpcd[776]: DUID 00:01:00:01:32:88:43:fd:52:54:00:12:34:56 vm-test-run-wal2json> server # [ 64.650698] dhcpcd[776]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 64.654111] dhcpcd[776]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-wal2json> server # [ 65.179150] sshd-keygen-start[815]: Generating public/private ed25519 key pair. vm-test-run-wal2json> server # [ 65.181140] sshd-keygen-start[815]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key vm-test-run-wal2json> server # [ 65.187966] sshd-keygen-start[815]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub vm-test-run-wal2json> server # [ 65.193598] sshd-keygen-start[815]: The key fingerprint is: vm-test-run-wal2json> server # [ 65.194531] sshd-keygen-start[815]: SHA256:nfhO0tW5UV/3KHkcuYnqvzyZCWc4DclmgEbZL4chlXo root@server vm-test-run-wal2json> server # [ 65.201069] sshd-keygen-start[815]: The key's randomart image is: vm-test-run-wal2json> server # [ 65.203134] sshd-keygen-start[815]: +--[ED25519 256]--+ vm-test-run-wal2json> server # [ 65.209508] sshd-keygen-start[815]: | ..=.. | vm-test-run-wal2json> server # [ 65.217807] sshd-keygen-start[815]: | = = . | vm-test-run-wal2json> server # [ 65.219182] sshd-keygen-start[815]: | . o * . o +| vm-test-run-wal2json> server # [ 65.220137] sshd-keygen-start[815]: | . EoO. = B=| vm-test-run-wal2json> server # [ 65.222718] sshd-keygen-start[815]: | .S=o+= X o| vm-test-run-wal2json> server # [ 65.226464] sshd-keygen-start[815]: | o+o+o o | vm-test-run-wal2json> server # [ 65.232751] sshd-keygen-start[815]: | . == +. | vm-test-run-wal2json> server # [ 65.234642] sshd-keygen-start[815]: | = .= | vm-test-run-wal2json> server # [ 65.237150] sshd-keygen-start[815]: | o.+o | vm-test-run-wal2json> server # [ 65.237878] sshd-keygen-start[815]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 65.250875] systemd[1]: sshd-keygen.service: Deactivated successfully. vm-test-run-wal2json> server # [ 65.256063] systemd[1]: Finished SSH Host Keys Generation. vm-test-run-wal2json> server # [ 65.259542] systemd[1]: sshd-keygen.service: Consumed 5.313s CPU time, 2.9M memory peak. vm-test-run-wal2json> server # [ 66.428199] dhcpcd[776]: eth0: soliciting a DHCP lease vm-test-run-wal2json> server # [ 66.443035] dhcpcd[776]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-wal2json> server # [ 66.471775] dhcpcd[776]: eth0: probing address 10.0.2.15/24 vm-test-run-wal2json> server # [ 66.537276] dhcpcd[776]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 66.553006] dhcpcd[776]: eth0: Router Advertisement from fe80::2 vm-test-run-wal2json> server # [ 66.555733] dhcpcd[776]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-wal2json> server # [ 66.562178] dhcpcd[776]: eth0: adding route to fec0::/64 vm-test-run-wal2json> server # [ 66.563441] dhcpcd[776]: eth0: adding default route via fe80::2 vm-test-run-wal2json> server # [ 67.241301] systemd[1]: Found device /dev/hvc0. vm-test-run-wal2json> server # [ 67.855260] systemd[1]: Found device /dev/ttyAMA0. vm-test-run-wal2json> server # [ 67.895977] systemd[1]: Started backdoor.service. vm-test-run-wal2json> server # connecting to host... vm-test-run-wal2json> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-wal2json> server: connected to guest root shell vm-test-run-wal2json> server: (connecting took 69.88 seconds) vm-test-run-wal2json> server: (finished: waiting for the VM to finish booting, in 69.88 seconds) vm-test-run-wal2json> server # [ 71.583947] (udev-worker)[857]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 71.629318] dhcpcd[776]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 71.648218] dhcpcd[776]: eth0: adding route to 10.0.2.0/24 vm-test-run-wal2json> server # [ 71.655960] dhcpcd[776]: eth0: adding default route via 10.0.2.2 vm-test-run-wal2json> server # [ 71.790264] (udev-worker)[858]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-wal2json> server # [ 71.792387] (udev-worker)[858]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 73.318757] systemd[1]: Found device Virtio network device. vm-test-run-wal2json> server # [ 73.363267] systemd[1]: Starting Address configuration of eth1... vm-test-run-wal2json> server # [ 74.352294] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-wal2json> server # [ 74.558816] network-addresses-eth1-start[912]: adding address 192.168.1.1/24... done vm-test-run-wal2json> server # [ 74.850453] network-addresses-eth1-start[912]: adding address 2001:db8:1::1/64... done vm-test-run-wal2json> server # [ 75.228506] systemd[1]: Finished Address configuration of eth1. vm-test-run-wal2json> server # [ 75.280548] dhcpcd[776]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 75.313860] systemd[1]: Starting Networking Setup... vm-test-run-wal2json> server # [ 75.317406] systemd[1]: Started DHCP Client. vm-test-run-wal2json> server # [ 75.352844] dhcpcd[776]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 76.899702] dhcpcd[776]: eth0: rebinding lease of 10.0.2.15 vm-test-run-wal2json> server # [ 76.908095] dhcpcd[776]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 78.558803] systemd[1]: Finished Networking Setup. vm-test-run-wal2json> server # [ 78.589050] systemd[1]: Reached target Network. vm-test-run-wal2json> server # [ 78.646124] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 78.706729] systemd[1]: Starting SSH Daemon... vm-test-run-wal2json> server # [ 78.770431] systemd[1]: Starting Permit User Sessions... vm-test-run-wal2json> server # [ 79.629855] systemd[1]: Finished Permit User Sessions. vm-test-run-wal2json> server # [ 79.707367] systemd[1]: Started Getty on tty1. vm-test-run-wal2json> server # [ 79.718212] systemd[1]: Reached target Login Prompts. vm-test-run-wal2json> server # [ 80.108226] sshd[1033]: Server listening on 0.0.0.0 port 22. vm-test-run-wal2json> server # [ 80.113246] sshd[1033]: Server listening on :: port 22. vm-test-run-wal2json> server # [ 80.114203] systemd[1]: Started SSH Daemon. vm-test-run-wal2json> server # [ 82.706119] postgresql-pre-start[1053]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 82.718006] postgresql-pre-start[1053]: This user must also own the server process. vm-test-run-wal2json> server # [ 82.886662] postgresql-pre-start[1053]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 82.888306] postgresql-pre-start[1053]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 82.888766] postgresql-pre-start[1053]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 82.889085] postgresql-pre-start[1053]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 82.889508] postgresql-pre-start[1053]: fixing permissions on existing directory /var/lib/postgresql/15 ... ok vm-test-run-wal2json> server # [ 82.942602] postgresql-pre-start[1053]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 82.960392] postgresql-pre-start[1053]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 83.695139] systemd-logind[664]: Watching system buttons on /dev/input/event0 (gpio-keys) vm-test-run-wal2json> server # [ 84.087929] postgresql-pre-start[1053]: selecting default max_connections ... 100 vm-test-run-wal2json> server # [ 84.953156] postgresql-pre-start[1053]: selecting default shared_buffers ... 128MB vm-test-run-wal2json> server # [ 91.073822] mousedev: PS/2 mouse device common for all mice vm-test-run-wal2json> server # [ 95.154908] systemd-logind[664]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) vm-test-run-wal2json> server # [ 105.348364] postgresql-pre-start[1053]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 105.412578] postgresql-pre-start[1053]: creating configuration files ... ok vm-test-run-wal2json> server # [ 111.638820] postgresql-pre-start[1053]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 125.806173] postgresql-pre-start[1053]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 128.831805] postgresql-pre-start[1053]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 128.843083] postgresql-pre-start[1053]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 128.853381] postgresql-pre-start[1053]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 128.863823] postgresql-pre-start[1053]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 128.865272] postgresql-pre-start[1053]: /nix/store/pf1liz03598zh3ymn2g8g5q3p68manb8-postgresql-15-wal2json/bin/pg_ctl -D /var/lib/postgresql/15 -l logfile start vm-test-run-wal2json> server # [ 131.094794] postgres[1514]: [1514] LOG: starting PostgreSQL 15.19 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 131.108960] postgres[1514]: [1514] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 131.109909] postgres[1514]: [1514] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 131.126081] postgres[1514]: [1514] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 131.257261] postgres[1535]: [1535] LOG: database system was shut down at 2026-11-12 09:32:42 GMT vm-test-run-wal2json> server # [ 131.368043] postgres[1514]: [1514] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 131.431801] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 131.466024] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 133.915023] postgresql-setup-start[1575]: CREATE ROLE vm-test-run-wal2json> server # [ 134.174451] postgresql-setup-start[1577]: ALTER ROLE vm-test-run-wal2json> server # [ 134.220139] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 134.240068] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 134.250010] systemd[1]: Reached target Multi-User System. vm-test-run-wal2json> server # [ 134.252832] systemd[1]: Startup finished in 18.496s (kernel) + 1min 55.749s (userspace) = 2min 14.246s. vm-test-run-wal2json> server: (finished: waiting for unit multi-user.target, in 136.83 seconds) vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 1.02 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.51 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 15 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.54 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.95 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.60 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 15, in 2.10 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 15 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/pf1liz03598zh3ymn2g8g5q3p68manb8-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" vm-test-run-wal2json> server # [ 140.237428] sudo[1644]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/pf1liz03598zh3ymn2g8g5q3p68manb8-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 wal2json vm-test-run-wal2json> server # [ 140.478340] sudo[1644]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # pg_regress: could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 141.554517] postgres[1662]: [1662] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 141.566800] postgres[1662]: [1662] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 141.573537] postgres[1662]: [1662] STATEMENT: select vm-test-run-wal2json> server # [ 141.579056] postgres[1662]: 1 vm-test-run-wal2json> server # [ 141.585063] postgres[1662]: from vm-test-run-wal2json> server # [ 141.598121] postgres[1662]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 141.671844] postgres[1662]: [1662] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 141.673243] postgres[1662]: [1662] DETAIL: Streaming transactions committing after 0/152AC80, reading WAL from 0/152AC48. vm-test-run-wal2json> server # [ 141.678134] postgres[1662]: [1662] STATEMENT: select vm-test-run-wal2json> server # [ 141.678826] postgres[1662]: data vm-test-run-wal2json> server # [ 141.687461] postgres[1662]: from vm-test-run-wal2json> server # [ 141.689857] postgres[1662]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 141.690830] postgres[1662]: 'reg_test', vm-test-run-wal2json> server # [ 141.691852] postgres[1662]: null, vm-test-run-wal2json> server # [ 141.697969] postgres[1662]: null, vm-test-run-wal2json> server # [ 141.698669] postgres[1662]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 141.699980] postgres[1662]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 141.700599] postgres[1662]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 141.703196] postgres[1662]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 141.704492] postgres[1662]: 'format-version', '2', vm-test-run-wal2json> server # [ 141.705990] postgres[1662]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 141.706523] postgres[1662]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 141.707188] postgres[1662]: ) x; vm-test-run-wal2json> server # [ 141.709487] postgres[1662]: [1662] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 141.710236] postgres[1662]: [1662] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 141.710691] postgres[1662]: [1662] STATEMENT: select vm-test-run-wal2json> server # [ 141.710985] postgres[1662]: data vm-test-run-wal2json> server # [ 141.711243] postgres[1662]: from vm-test-run-wal2json> server # [ 141.711975] postgres[1662]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 141.713453] postgres[1662]: 'reg_test', vm-test-run-wal2json> server # [ 141.713858] postgres[1662]: null, vm-test-run-wal2json> server # [ 141.715452] postgres[1662]: null, vm-test-run-wal2json> server # [ 141.715819] postgres[1662]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 141.716121] postgres[1662]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 141.718009] postgres[1662]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 141.718521] postgres[1662]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 141.719378] postgres[1662]: 'format-version', '2', vm-test-run-wal2json> server # [ 141.719715] postgres[1662]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 141.720906] postgres[1662]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 141.721347] postgres[1662]: ) x; vm-test-run-wal2json> server # [ 142.162547] sudo[1644]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/pf1liz03598zh3ymn2g8g5q3p68manb8-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" , in 2.77 seconds) vm-test-run-wal2json> (using postmaster on Unix socket, default port) vm-test-run-wal2json> ============== running regression test queries ============== vm-test-run-wal2json> test wal2json ... ok 1183 ms vm-test-run-wal2json> vm-test-run-wal2json> ===================== vm-test-run-wal2json> All 1 tests passed. vm-test-run-wal2json> ===================== vm-test-run-wal2json> vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 15 after extension upgrade, in 2.77 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.53 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.54 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.67 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.75 seconds) vm-test-run-wal2json> subtest: switch to postgresql 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 153.713024] nixos[1700]: switching to system configuration /nix/store/hmz9j57b9fyim34b3j0py7pdygx96kkw-nixos-system-server-test vm-test-run-wal2json> server # [ 153.754823] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 153.756152] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 153.772266] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 153.784121] postgres[1514]: [1514] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 153.790369] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 153.794159] postgres[1514]: [1514] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 153.906186] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 153.958559] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 153.993174] postgres[1514]: [1514] LOG: background worker "logical replication launcher" (PID 1538) exited with exit code 1 vm-test-run-wal2json> server # [ 154.007690] postgres[1533]: [1533] LOG: shutting down vm-test-run-wal2json> server # [ 154.028970] postgres[1533]: [1533] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 154.263570] postgres[1533]: [1533] LOG: checkpoint complete: wrote 54 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.055 s, sync=0.097 s, total=0.257 s; sync files=48, longest=0.020 s, average=0.002 s; distance=149 kB, estimate=149 kB vm-test-run-wal2json> server # [ 154.310971] postgres[1514]: [1514] LOG: database system is shut down vm-test-run-wal2json> server # [ 154.417051] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # [ 154.446753] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 154.465040] systemd[1]: postgresql.service: Consumed 26.882s CPU time, 91.5M memory peak, 46M written to disk. vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 162.310332] systemd[1]: Reload requested from client PID 1700 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 162.318090] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 169.274319] systemd[1]: Reloading finished in 6948 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 169.725970] systemd[1]: Starting Re-setup tmpfiles on a system that is already running.... vm-test-run-wal2json> server # [ 171.231145] systemd[1]: Finished Re-setup tmpfiles on a system that is already running.. vm-test-run-wal2json> server # [ 171.253195] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 171.318250] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 171.792142] dbus-daemon[636]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 172.114938] dbus-daemon[636]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 172.137899] dbus-send[1909]: method return time=1794476008.577733 sender=org.freedesktop.DBus -> destination=:1.5 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 172.283405] dbus-daemon[636]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 172.614152] dbus-daemon[636]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 172.650238] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 172.702719] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 172.706435] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 172.848435] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 172.929760] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 173.123625] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 173.180916] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 173.195445] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 173.412771] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 173.469415] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 173.471406] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 173.486464] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 173.490359] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 173.492164] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 173.495052] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 173.768110] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 173.810116] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 175.001366] postgresql-migrate-start[1937]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 175.015109] postgresql-migrate-start[1937]: This user must also own the server process. vm-test-run-wal2json> server # [ 175.128764] postgresql-migrate-start[1937]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 175.130553] postgresql-migrate-start[1937]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 175.131568] postgresql-migrate-start[1937]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 175.131944] postgresql-migrate-start[1937]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 175.137670] postgresql-migrate-start[1937]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 175.165954] postgresql-migrate-start[1937]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 175.166891] postgresql-migrate-start[1937]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 176.576042] postgresql-migrate-start[1937]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 177.819775] postgresql-migrate-start[1937]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 181.302997] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 181.322309] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 181.323742] systemd[1]: suid-sgid-wrappers.service: Consumed 2.987s CPU time, 3.2M memory peak. vm-test-run-wal2json> server # [ 190.746402] postgresql-migrate-start[1937]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 190.767715] postgresql-migrate-start[1937]: creating configuration files ... ok vm-test-run-wal2json> server # [ 194.374030] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:08.0/virtio7/input/input3 vm-test-run-wal2json> server # [ 194.574010] postgresql-migrate-start[1937]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 203.671987] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 203.930998] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 203.941082] systemd[1]: Stopped Virtual Console Setup. vm-test-run-wal2json> server # [ 204.022144] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 204.551578] postgresql-migrate-start[1937]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 207.727571] postgresql-migrate-start[1937]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 207.734162] postgresql-migrate-start[1937]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 207.735597] postgresql-migrate-start[1937]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 207.757448] postgresql-migrate-start[1937]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 207.783535] postgresql-migrate-start[1937]: /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 208.209990] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-wal2json> server # [ 209.579503] systemd[1]: Finished Virtual Console Setup. vm-test-run-wal2json> server # [ 213.351431] systemd-logind[664]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-wal2json> server # [ 213.403356] postgresql-migrate-start[2222]: Performing Consistency Checks vm-test-run-wal2json> server # [ 213.407642] postgresql-migrate-start[2222]: ----------------------------- vm-test-run-wal2json> server # [ 213.409179] postgresql-migrate-start[2222]: Checking cluster versions ok vm-test-run-wal2json> server # [ 215.510411] postgresql-migrate-start[2222]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 215.551849] postgresql-migrate-start[2222]: Checking database connection settings ok vm-test-run-wal2json> server # [ 215.617640] postgresql-migrate-start[2222]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 215.623755] postgresql-migrate-start[2222]: Checking for contrib/isn with bigint-passing mismatch ok vm-test-run-wal2json> server # [ 216.207473] postgresql-migrate-start[2222]: Checking data type usage ok vm-test-run-wal2json> server # [ 216.378443] postgresql-migrate-start[2222]: Checking for not-null constraint inconsistencies ok vm-test-run-wal2json> server # [ 216.909008] postgresql-migrate-start[2222]: Creating dump of global objects ok vm-test-run-wal2json> server # [ 218.601265] postgresql-migrate-start[2222]: Creating dump of database schemas ok vm-test-run-wal2json> server # [ 220.206379] postgresql-migrate-start[2222]: Checking for presence of required libraries ok vm-test-run-wal2json> server # [ 220.261207] postgresql-migrate-start[2222]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 220.315808] postgresql-migrate-start[2222]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 220.322429] postgresql-migrate-start[2222]: Checking for new cluster tablespace directories ok vm-test-run-wal2json> server # [ 220.324171] postgresql-migrate-start[2222]: If pg_upgrade fails after this point, you must re-initdb the vm-test-run-wal2json> server # [ 220.329359] postgresql-migrate-start[2222]: new cluster before continuing. vm-test-run-wal2json> server # [ 220.330838] postgresql-migrate-start[2222]: Performing Upgrade vm-test-run-wal2json> server # [ 220.332819] postgresql-migrate-start[2222]: ------------------ vm-test-run-wal2json> server # [ 220.369634] postgresql-migrate-start[2222]: Setting locale and encoding for new cluster ok vm-test-run-wal2json> server # [ 222.337198] postgresql-migrate-start[2222]: Analyzing all rows in the new cluster ok vm-test-run-wal2json> server # [ 223.179009] postgresql-migrate-start[2222]: Freezing all rows in the new cluster ok vm-test-run-wal2json> server # [ 223.464220] postgresql-migrate-start[2222]: Deleting files from new pg_xact ok vm-test-run-wal2json> server # [ 223.588887] postgresql-migrate-start[2222]: Copying old pg_xact to new server ok vm-test-run-wal2json> server # [ 223.891349] postgresql-migrate-start[2222]: Setting oldest XID for new cluster ok vm-test-run-wal2json> server # [ 224.786514] postgresql-migrate-start[2222]: Setting next transaction ID and epoch for new cluster ok vm-test-run-wal2json> server # [ 224.789256] postgresql-migrate-start[2222]: Deleting files from new pg_multixact/offsets ok vm-test-run-wal2json> server # [ 224.922320] postgresql-migrate-start[2222]: Copying old pg_multixact/offsets to new server ok vm-test-run-wal2json> server # [ 224.923709] postgresql-migrate-start[2222]: Deleting files from new pg_multixact/members ok vm-test-run-wal2json> server # [ 225.060157] postgresql-migrate-start[2222]: Copying old pg_multixact/members to new server ok vm-test-run-wal2json> server # [ 225.359297] postgresql-migrate-start[2222]: Setting next multixact ID and offset for new cluster ok vm-test-run-wal2json> server # [ 225.647214] postgresql-migrate-start[2222]: Resetting WAL archives ok vm-test-run-wal2json> server # [ 227.072780] postgresql-migrate-start[2222]: Setting frozenxid and minmxid counters in new cluster ok vm-test-run-wal2json> server # [ 227.395492] postgresql-migrate-start[2222]: Restoring global objects in the new cluster ok vm-test-run-wal2json> server # [ 229.152923] postgresql-migrate-start[2222]: Restoring database schemas in the new cluster ok vm-test-run-wal2json> server # [ 229.765954] postgresql-migrate-start[2222]: Copying user relation files ok vm-test-run-wal2json> server # [ 230.070684] postgresql-migrate-start[2222]: Setting next OID for new cluster ok vm-test-run-wal2json> server # [ 231.541026] postgresql-migrate-start[2222]: Sync data directory to disk ok vm-test-run-wal2json> server # [ 231.543399] postgresql-migrate-start[2222]: Creating script to delete old cluster ok vm-test-run-wal2json> server # [ 233.437271] postgresql-migrate-start[2222]: Checking for extension updates ok vm-test-run-wal2json> server # [ 233.713695] postgresql-migrate-start[2222]: Upgrade Complete vm-test-run-wal2json> server # [ 233.717873] postgresql-migrate-start[2222]: ---------------- vm-test-run-wal2json> server # [ 233.718725] postgresql-migrate-start[2222]: Optimizer statistics are not transferred by pg_upgrade. vm-test-run-wal2json> server # [ 233.720005] postgresql-migrate-start[2222]: Once you start the new server, consider running: vm-test-run-wal2json> server # [ 233.721161] postgresql-migrate-start[2222]: /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/bin/vacuumdb --all --analyze-in-stages vm-test-run-wal2json> server # [ 233.721955] postgresql-migrate-start[2222]: Running this script will delete the old cluster's data files: vm-test-run-wal2json> server # [ 233.722374] postgresql-migrate-start[2222]: ./delete_old_cluster.sh vm-test-run-wal2json> server # [ 233.765903] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 233.810343] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 235.108060] postgres[2407]: [2407] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 235.111826] postgres[2407]: [2407] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 235.119453] postgres[2407]: [2407] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 235.124506] postgres[2407]: [2407] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 235.191045] postgres[2413]: [2413] LOG: database system was shut down at 2026-11-12 09:34:30 GMT vm-test-run-wal2json> server # [ 235.269464] postgres[2407]: [2407] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 235.292998] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 235.333495] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 236.097344] postgresql-setup-start[2423]: ALTER ROLE vm-test-run-wal2json> server # [ 236.139378] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 236.154733] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # the following new units were started: postgresql-migrate.service, sys-devices-platform-4010000000.pcie-pci0000:00-0000:00:0b.0-virtio9-virtio\x2dports-vport9p0.device, sys-devices-virtual-input-mice.device, sys-devices-virtual-misc-rfkill.device, sys-devices-virtual-misc-tun.device, sys-devices-virtual-mtd-mtd0ro.device, sysinit-reactivation.target, systemd-rfkill.socket, systemd-tmpfiles-resetup.service, systemd-vconsole-setup.service vm-test-run-wal2json> server # [ 236.449462] nixos[1700]: finished switching to system configuration /nix/store/hmz9j57b9fyim34b3j0py7pdygx96kkw-nixos-system-server-test vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 0.76 seconds) vm-test-run-wal2json> server: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no' vm-test-run-wal2json> server: (finished: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no', in 0.16 seconds) vm-test-run-wal2json> (finished: subtest: switch to postgresql 17, in 93.46 seconds) vm-test-run-wal2json> subtest: Check last version of the extension after postgresql upgrade vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.35 seconds) vm-test-run-wal2json> (finished: subtest: Check last version of the extension after postgresql upgrade, in 0.35 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.34 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.40 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.34 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 17, in 1.08 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 239.185332] sudo[2449]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 239.317719] sudo[2449]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 239.789014] postgres[2456]: [2456] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 239.790574] postgres[2456]: [2456] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 239.791276] postgres[2456]: [2456] STATEMENT: select vm-test-run-wal2json> server # [ 239.791900] postgres[2456]: 1 vm-test-run-wal2json> server # [ 239.792996] postgres[2456]: from vm-test-run-wal2json> server # [ 239.793655] postgres[2456]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 239.828612] postgres[2456]: [2456] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 239.830379] postgres[2456]: [2456] DETAIL: Streaming transactions committing after 0/8034ED0, reading WAL from 0/8034E98. vm-test-run-wal2json> server # [ 239.831426] postgres[2456]: [2456] STATEMENT: select vm-test-run-wal2json> server # [ 239.831868] postgres[2456]: data vm-test-run-wal2json> server # [ 239.832180] postgres[2456]: from vm-test-run-wal2json> server # [ 239.832442] postgres[2456]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 239.834923] postgres[2456]: 'reg_test', vm-test-run-wal2json> server # [ 239.836666] postgres[2456]: null, vm-test-run-wal2json> server # [ 239.837102] postgres[2456]: null, vm-test-run-wal2json> server # [ 239.838215] postgres[2456]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 239.839209] postgres[2456]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 239.839892] postgres[2456]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 239.842817] postgres[2456]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 239.843953] postgres[2456]: 'format-version', '2', vm-test-run-wal2json> server # [ 239.844983] postgres[2456]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 239.845792] postgres[2456]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 239.846109] postgres[2456]: ) x; vm-test-run-wal2json> server # [ 239.846713] postgres[2456]: [2456] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 239.847145] postgres[2456]: [2456] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 239.847511] postgres[2456]: [2456] STATEMENT: select vm-test-run-wal2json> server # [ 239.847745] postgres[2456]: data vm-test-run-wal2json> server # [ 239.847970] postgres[2456]: from vm-test-run-wal2json> server # [ 239.848250] postgres[2456]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 239.849348] postgres[2456]: 'reg_test', vm-test-run-wal2json> server # [ 239.849880] postgres[2456]: null, vm-test-run-wal2json> server # [ 239.850169] postgres[2456]: null, vm-test-run-wal2json> server # [ 239.851005] postgres[2456]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 239.851605] postgres[2456]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 239.852821] postgres[2456]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 239.853217] postgres[2456]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 239.853502] postgres[2456]: 'format-version', '2', vm-test-run-wal2json> server # [ 239.853959] postgres[2456]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 239.854583] postgres[2456]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 239.855170] postgres[2456]: ) x; vm-test-run-wal2json> server # [ 240.075940] sudo[2449]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.29 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 474 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after extension upgrade, in 1.29 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.32 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.31 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.28 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 0.91 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 241.324360] sudo[2471]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 241.438125] sudo[2471]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 241.827070] postgres[2478]: [2478] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 241.830657] postgres[2478]: [2478] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 241.831741] postgres[2478]: [2478] STATEMENT: select vm-test-run-wal2json> server # [ 241.834094] postgres[2478]: 1 vm-test-run-wal2json> server # [ 241.834582] postgres[2478]: from vm-test-run-wal2json> server # [ 241.835048] postgres[2478]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 241.860728] postgres[2478]: [2478] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 241.861766] postgres[2478]: [2478] DETAIL: Streaming transactions committing after 0/803B920, reading WAL from 0/803B8E8. vm-test-run-wal2json> server # [ 241.862569] postgres[2478]: [2478] STATEMENT: select vm-test-run-wal2json> server # [ 241.863785] postgres[2478]: data vm-test-run-wal2json> server # [ 241.864126] postgres[2478]: from vm-test-run-wal2json> server # [ 241.865310] postgres[2478]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 241.866028] postgres[2478]: 'reg_test', vm-test-run-wal2json> server # [ 241.866651] postgres[2478]: null, vm-test-run-wal2json> server # [ 241.866905] postgres[2478]: null, vm-test-run-wal2json> server # [ 241.867303] postgres[2478]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 241.867561] postgres[2478]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 241.868810] postgres[2478]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 241.869796] postgres[2478]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 241.870319] postgres[2478]: 'format-version', '2', vm-test-run-wal2json> server # [ 241.870608] postgres[2478]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 241.871013] postgres[2478]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 241.871315] postgres[2478]: ) x; vm-test-run-wal2json> server # [ 241.872350] postgres[2478]: [2478] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 241.874101] postgres[2478]: [2478] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 241.874685] postgres[2478]: [2478] STATEMENT: select vm-test-run-wal2json> server # [ 241.874983] postgres[2478]: data vm-test-run-wal2json> server # [ 241.875504] postgres[2478]: from vm-test-run-wal2json> server # [ 241.877218] postgres[2478]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 241.877616] postgres[2478]: 'reg_test', vm-test-run-wal2json> server # [ 241.878015] postgres[2478]: null, vm-test-run-wal2json> server # [ 241.878458] postgres[2478]: null, vm-test-run-wal2json> server # [ 241.878970] postgres[2478]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 241.881755] postgres[2478]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 241.882318] postgres[2478]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 241.882616] postgres[2478]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 241.883172] postgres[2478]: 'format-version', '2', vm-test-run-wal2json> server # [ 241.883616] postgres[2478]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 241.884005] postgres[2478]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 241.885081] postgres[2478]: ) x; vm-test-run-wal2json> server # [ 242.073019] sudo[2471]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/flp21b0yj9sf8kfddys5fz0ld9is1kg7-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.07 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 413 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after installing the last version, in 1.07 seconds) vm-test-run-wal2json> subtest: switch to orioledb 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 247.288964] nixos[2485]: switching to system configuration /nix/store/wrfnznh3f0b3d3m8k0srccg85jsqhyhh-nixos-system-server-test vm-test-run-wal2json> server # [ 247.299211] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 247.314688] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 247.316129] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 247.321648] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 247.327997] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 247.335615] postgres[2407]: [2407] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 247.339218] postgres[2407]: [2407] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 247.388591] postgres[2407]: [2407] LOG: background worker "logical replication launcher" (PID 2416) exited with exit code 1 vm-test-run-wal2json> server # [ 247.393988] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 247.415030] postgres[2411]: [2411] LOG: shutting down vm-test-run-wal2json> server # [ 247.425749] postgres[2411]: [2411] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 247.548132] postgres[2411]: [2411] LOG: checkpoint complete: wrote 57 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.036 s, sync=0.047 s, total=0.140 s; sync files=45, longest=0.011 s, average=0.002 s; distance=242 kB, estimate=242 kB; lsn=0/803C9C0, redo lsn=0/803C9C0 vm-test-run-wal2json> server # [ 247.586350] postgres[2407]: [2407] LOG: database system is shut down vm-test-run-wal2json> server # [ 247.636108] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 247.642805] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 247.649539] systemd[1]: postgresql.service: Consumed 2.074s CPU time, 22.3M memory peak, 264K written to disk. vm-test-run-wal2json> server # [ 247.678442] systemd[1]: postgresql-migrate.service: Deactivated successfully. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # [ 247.686806] systemd[1]: Stopped postgresql-migrate.service. vm-test-run-wal2json> server # [ 247.687794] systemd[1]: postgresql-migrate.service: Consumed 35.454s CPU time, 93.5M memory peak, 173M written to disk. vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 251.371250] systemd[1]: Reload requested from client PID 2485 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 251.372522] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 256.362818] systemd[1]: Reloading finished in 4979 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 256.647226] systemd[1]: Stopped target Reactivate sysinit units. vm-test-run-wal2json> server # [ 256.650023] systemd[1]: Stopping Reactivate sysinit units... vm-test-run-wal2json> server # [ 256.651770] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 256.692714] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 256.944390] dbus-daemon[636]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 257.104638] dbus-daemon[636]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 257.120633] dbus-send[2561]: method return time=1794476093.567609 sender=org.freedesktop.DBus -> destination=:1.7 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 257.175246] dbus-daemon[636]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 257.348021] dbus-daemon[636]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 257.354726] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 257.418791] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 257.531801] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 257.584835] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 257.638198] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 257.649849] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 257.716461] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 257.727161] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 258.062373] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 258.069660] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 258.085243] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 258.140942] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 258.142517] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 258.143537] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 258.147947] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 258.148867] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 258.159934] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 258.478573] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 261.238274] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 261.242268] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 261.246463] systemd[1]: suid-sgid-wrappers.service: Consumed 1.524s CPU time, 3.4M memory peak. vm-test-run-wal2json> server # [ 261.296920] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 262.365988] postgresql-pre-start[2644]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 262.369017] postgresql-pre-start[2644]: This user must also own the server process. vm-test-run-wal2json> server # [ 262.429366] postgresql-pre-start[2644]: Using language tag "en-US" for ICU locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 262.430636] postgresql-pre-start[2644]: The database cluster will be initialized with this locale configuration: vm-test-run-wal2json> server # [ 262.431690] postgresql-pre-start[2644]: locale provider: icu vm-test-run-wal2json> server # [ 262.432239] postgresql-pre-start[2644]: default collation: en-US vm-test-run-wal2json> server # [ 262.433632] postgresql-pre-start[2644]: LC_COLLATE: en_US.UTF-8 vm-test-run-wal2json> server # [ 262.434281] postgresql-pre-start[2644]: LC_CTYPE: en_US.UTF-8 vm-test-run-wal2json> server # [ 262.434697] postgresql-pre-start[2644]: LC_MESSAGES: en_US.UTF-8 vm-test-run-wal2json> server # [ 262.435081] postgresql-pre-start[2644]: LC_MONETARY: en_US.UTF-8 vm-test-run-wal2json> server # [ 262.435372] postgresql-pre-start[2644]: LC_NUMERIC: en_US.UTF-8 vm-test-run-wal2json> server # [ 262.435636] postgresql-pre-start[2644]: LC_TIME: en_US.UTF-8 vm-test-run-wal2json> server # [ 262.436304] postgresql-pre-start[2644]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 262.438265] postgresql-pre-start[2644]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 262.438803] postgresql-pre-start[2644]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 262.443485] postgresql-pre-start[2644]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 262.445262] postgresql-pre-start[2644]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 262.956140] postgresql-pre-start[2644]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 263.403002] postgresql-pre-start[2644]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 270.819337] postgresql-pre-start[2644]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 270.845145] postgresql-pre-start[2644]: creating configuration files ... ok vm-test-run-wal2json> server # [ 272.686638] postgresql-pre-start[2644]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 277.357380] postgresql-pre-start[2644]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 278.555460] postgresql-pre-start[2644]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 278.557914] postgresql-pre-start[2644]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 278.558541] postgresql-pre-start[2644]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 278.561923] postgresql-pre-start[2644]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 278.564032] postgresql-pre-start[2644]: /nix/store/lx7prxh1swfxf0g9zrih0vzzxl23q42l-postgresql-orioledb-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 279.497587] postgres[2657]: [2657] LOG: registered custom resource manager "OrioleDB resource manager" with ID 129 vm-test-run-wal2json> server # [ 279.813761] postgres[2657]: [2657] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 279.868884] postgres[2657]: [2657] LOG: listening on IPv6 address "::1", port 5432 vm-test-run-wal2json> server # [ 279.871425] postgres[2657]: [2657] LOG: listening on IPv4 address "127.0.0.1", port 5432 vm-test-run-wal2json> server # [ 279.882791] postgres[2657]: [2657] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 279.950327] postgres[2663]: [2663] LOG: Cleanup of old files at startup. Checkpoint 0 vm-test-run-wal2json> server # [ 279.957714] postgres[2663]: [2663] LOG: database system was shut down at 2026-11-12 09:35:13 GMT vm-test-run-wal2json> server # [ 279.975943] postgres[2664]: [2664] LOG: orioledb background writer 0 started vm-test-run-wal2json> server # [ 280.036694] postgres[2657]: [2657] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 280.062289] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 280.095670] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 281.055692] postgresql-setup-start[2671]: CREATE EXTENSION vm-test-run-wal2json> server # [ 281.491874] postgresql-setup-start[2677]: CREATE ROLE vm-test-run-wal2json> server # [ 281.641470] postgresql-setup-start[2679]: ALTER ROLE vm-test-run-wal2json> server # [ 281.692348] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 281.702195] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 281.997375] nixos[2485]: finished switching to system configuration /nix/store/wrfnznh3f0b3d3m8k0srccg85jsqhyhh-nixos-system-server-test vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" , in 0.35 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.31 seconds) vm-test-run-wal2json> (finished: subtest: switch to orioledb 17, in 40.58 seconds) vm-test-run-wal2json> subtest: Check upgrade path with orioledb 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.22 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.36 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.31 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with orioledb 17, in 0.89 seconds) vm-test-run-wal2json> subtest: Check pg_regress with orioledb 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/lx7prxh1swfxf0g9zrih0vzzxl23q42l-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" vm-test-run-wal2json> server # [ 283.887378] sudo[2702]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/lx7prxh1swfxf0g9zrih0vzzxl23q42l-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 wal2json vm-test-run-wal2json> server # [ 284.002127] sudo[2702]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 284.506997] postgres[2709]: [2709] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 284.508170] postgres[2709]: [2709] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 284.510026] postgres[2709]: [2709] STATEMENT: select vm-test-run-wal2json> server # [ 284.511665] postgres[2709]: 1 vm-test-run-wal2json> server # [ 284.513189] postgres[2709]: from vm-test-run-wal2json> server # [ 284.513776] postgres[2709]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 284.556799] postgres[2709]: [2709] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 284.558599] postgres[2709]: [2709] DETAIL: Streaming transactions committing after 0/15908A0, reading WAL from 0/1590850. vm-test-run-wal2json> server # [ 284.559720] postgres[2709]: [2709] STATEMENT: select vm-test-run-wal2json> server # [ 284.560250] postgres[2709]: data vm-test-run-wal2json> server # [ 284.560597] postgres[2709]: from vm-test-run-wal2json> server # [ 284.561355] postgres[2709]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 284.561822] postgres[2709]: 'reg_test', vm-test-run-wal2json> server # [ 284.562226] postgres[2709]: null, vm-test-run-wal2json> server # [ 284.563103] postgres[2709]: null, vm-test-run-wal2json> server # [ 284.564066] postgres[2709]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 284.565824] postgres[2709]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 284.566382] postgres[2709]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 284.566920] postgres[2709]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 284.567334] postgres[2709]: 'format-version', '2', vm-test-run-wal2json> server # [ 284.567726] postgres[2709]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 284.568347] postgres[2709]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 284.568628] postgres[2709]: ) x; vm-test-run-wal2json> server # [ 284.569876] postgres[2709]: [2709] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 284.570805] postgres[2709]: [2709] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 284.571903] postgres[2709]: [2709] STATEMENT: select vm-test-run-wal2json> server # [ 284.572180] postgres[2709]: data vm-test-run-wal2json> server # [ 284.573144] postgres[2709]: from vm-test-run-wal2json> server # [ 284.573469] postgres[2709]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 284.574109] postgres[2709]: 'reg_test', vm-test-run-wal2json> server # [ 284.574413] postgres[2709]: null, vm-test-run-wal2json> server # [ 284.574648] postgres[2709]: null, vm-test-run-wal2json> server # [ 284.574863] postgres[2709]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 284.575095] postgres[2709]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 284.575347] postgres[2709]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 284.575581] postgres[2709]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 284.575868] postgres[2709]: 'format-version', '2', vm-test-run-wal2json> server # [ 284.576127] postgres[2709]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 284.576378] postgres[2709]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 284.576609] postgres[2709]: ) x; vm-test-run-wal2json> server # [ 284.830459] sudo[2702]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/lx7prxh1swfxf0g9zrih0vzzxl23q42l-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/2zv8j39hdn149zi4v21mv4y85w1iplvr-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" , in 1.30 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 560 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with orioledb 17 after installing the last version, in 1.30 seconds) vm-test-run-wal2json> (finished: run the VM test script, in 286.03 seconds) vm-test-run-wal2json> test script finished in 286.33s vm-test-run-wal2json> cleanup vm-test-run-wal2json> kill machine (pid 9) vm-test-run-wal2json> qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/a1mjjnpfivsx5gi4rxbcr54vl6gyjfzj-python3-3.13.11/bin/python3.13) vm-test-run-wal2json> vde_switch: EOF data port: Interrupted system call vm-test-run-wal2json> kill vlan (pid 7) vm-test-run-wal2json> (finished: cleanup, in 0.01 seconds) vm-test-run-wal2json> vde_switch: Caught signal 15, cleaning up and exiting