these 2 derivations will be built: /nix/store/qdc5kkkhqdj3a8wqblm4lym9n5aqzwaf-nixos-test-driver-wal2json.drv /nix/store/610a80nwf7ljyq702dxdq1ni5dl6yd8h-vm-test-run-wal2json.drv building '/nix/store/qdc5kkkhqdj3a8wqblm4lym9n5aqzwaf-nixos-test-driver-wal2json.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/610a80nwf7ljyq702dxdq1ni5dl6yd8h-vm-test-run-wal2json.drv' on 'ssh-ng://builder@mac-linux-builder' building '/nix/store/610a80nwf7ljyq702dxdq1ni5dl6yd8h-vm-test-run-wal2json.drv' vm-test-run-wal2json> Machine state will be reset. To keep it, pass --keep-vm-state vm-test-run-wal2json> start all VLans vm-test-run-wal2json> start vlan vm-test-run-wal2json> running vlan (pid 7; ctl /build/vde1.ctl) vm-test-run-wal2json> (finished: start all VLans, in 0.00 seconds) vm-test-run-wal2json> Test will time out and terminate in 3600 seconds vm-test-run-wal2json> run the VM test script vm-test-run-wal2json> additionally exposed symbols: vm-test-run-wal2json> server, vm-test-run-wal2json> vlan1, vm-test-run-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug vm-test-run-wal2json> Running tests for extension: wal2json vm-test-run-wal2json> start all VMs vm-test-run-wal2json> server: starting vm vm-test-run-wal2json> mke2fs 1.47.3 (8-Jul-2025) vm-test-run-wal2json> qemu-system-aarch64: Could not access KVM kernel module: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: failed to initialize kvm: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: falling back to tcg vm-test-run-wal2json> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-wal2json> server # Formatting '/build/vm-state-server/tmp.dT5jTcYkTv', fmt=raw size=1073741824 vm-test-run-wal2json> server # Discarding device blocks: 0/262144 done vm-test-run-wal2json> server # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-wal2json> server # Filesystem UUID: 443809ee-d7b3-40ba-8886-5595b3cd00c4 vm-test-run-wal2json> server: QEMU running (pid 9) vm-test-run-wal2json> server # Superblock backups stored on blocks: vm-test-run-wal2json> server # 32768, 98304, 163840, 229376 vm-test-run-wal2json> server # vm-test-run-wal2json> server # Allocating group tables: 0/8 done vm-test-run-wal2json> server # Writing inode tables: 0/8 done vm-test-run-wal2json> server # Creating journal (8192 blocks): done vm-test-run-wal2json> server # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-wal2json> server # vm-test-run-wal2json> server # Virtualisation disk image created. vm-test-run-wal2json> (finished: start all VMs, in 0.15 seconds) vm-test-run-wal2json> server: waiting for unit multi-user.target vm-test-run-wal2json> server: waiting for the VM to finish booting vm-test-run-wal2json> server # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510] vm-test-run-wal2json> server # [ 0.000000] Linux version 6.12.63 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP Thu Dec 18 12:55:23 UTC 2025 vm-test-run-wal2json> server # [ 0.000000] KASLR enabled vm-test-run-wal2json> server # [ 0.000000] random: crng init done vm-test-run-wal2json> server # [ 0.000000] Machine model: linux,dummy-virt vm-test-run-wal2json> server # [ 0.000000] efi: UEFI not found. vm-test-run-wal2json> server # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT vm-test-run-wal2json> server # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] NODE_DATA(0) allocated [mem 0x13f602200-0x13f60593f] vm-test-run-wal2json> server # [ 0.000000] Zone ranges: vm-test-run-wal2json> server # [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] vm-test-run-wal2json> server # [ 0.000000] DMA32 empty vm-test-run-wal2json> server # [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Device empty vm-test-run-wal2json> server # [ 0.000000] Movable zone start for each node vm-test-run-wal2json> server # [ 0.000000] Early memory node ranges vm-test-run-wal2json> server # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 vm-test-run-wal2json> server # [ 0.000000] psci: probing for conduit method from DT. vm-test-run-wal2json> server # [ 0.000000] psci: PSCIv1.1 detected in firmware. vm-test-run-wal2json> server # [ 0.000000] psci: Using standard PSCI v0.2 function IDs vm-test-run-wal2json> server # [ 0.000000] psci: Trusted OS migration not required vm-test-run-wal2json> server # [ 0.000000] psci: SMC Calling Convention v1.0 vm-test-run-wal2json> server # [ 0.000000] percpu: Embedded 88 pages/cpu s180056 r65536 d114856 u360448 vm-test-run-wal2json> server # [ 0.000000] Detected PIPT I-cache on CPU0 vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: GIC system register CPU interface vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: HCRX_EL2 register vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: 52-bit Virtual Addressing (LPA2) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Spectre-v4 vm-test-run-wal2json> server # [ 0.000000] alternatives: applying boot alternatives vm-test-run-wal2json> server # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/j4gsgzj4fy9yqawqmf0pn2wmwcsvbzji-nixos-system-server-test/init regInfo=/nix/store/577mggvqsqhrz2z203rdc8ak48avlhrq-closure-info/registration console=ttyAMA0,115200n8 console=tty0 vm-test-run-wal2json> server # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/577mggvqsqhrz2z203rdc8ak48avlhrq-closure-info/registration", will be passed to user space. vm-test-run-wal2json> server # [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Fallback order for Node 0: 0 vm-test-run-wal2json> server # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 vm-test-run-wal2json> server # [ 0.000000] Policy zone: Normal vm-test-run-wal2json> server # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-wal2json> server # [ 0.000000] software IO TLB: area num 2. vm-test-run-wal2json> server # [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) vm-test-run-wal2json> server # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-wal2json> server # [ 0.000000] allocated 8388608 bytes of page_ext vm-test-run-wal2json> server # [ 0.000000] ftrace: allocating 72257 entries in 283 pages vm-test-run-wal2json> server # [ 0.000000] ftrace: allocated 283 pages with 5 groups vm-test-run-wal2json> server # [ 0.000000] rcu: Hierarchical RCU implementation. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU event tracing is enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] Rude variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] Tracing variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. vm-test-run-wal2json> server # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 vm-test-run-wal2json> server # [ 0.000000] GICv3: 256 SPIs implemented vm-test-run-wal2json> server # [ 0.000000] GICv3: 0 Extended SPIs implemented vm-test-run-wal2json> server # [ 0.000000] Root IRQ handler: gic_handle_irq vm-test-run-wal2json> server # [ 0.000000] GICv3: GICv3 features: 16 PPIs vm-test-run-wal2json> server # [ 0.000000] GICv3: GICD_CTRL.DS=1, SCR_EL3.FIQ=0 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 vm-test-run-wal2json> server # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @100ae0000 (indirect, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @100af0000 (flat, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] GICv3: using LPI property table @0x0000000100b00000 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100b20000 vm-test-run-wal2json> server # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-wal2json> server # [ 0.000000] arch_timer: cp15 timer(s) running at 1000.00MHz (virt). vm-test-run-wal2json> server # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-wal2json> server # [ 0.000037] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns vm-test-run-wal2json> server # [ 0.003790] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-wal2json> server # [ 0.015037] Console: colour dummy device 80x25 vm-test-run-wal2json> server # [ 0.016900] printk: legacy console [tty0] enabled vm-test-run-wal2json> server # [ 0.022943] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) vm-test-run-wal2json> server # [ 0.023335] pid_max: default: 32768 minimum: 301 vm-test-run-wal2json> server # [ 0.026244] LSM: initializing lsm=capability,landlock,yama,bpf vm-test-run-wal2json> server # [ 0.027662] landlock: Up and running. vm-test-run-wal2json> server # [ 0.027712] Yama: becoming mindful. vm-test-run-wal2json> server # [ 0.032375] LSM support for eBPF active vm-test-run-wal2json> server # [ 0.035328] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.035507] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.066853] cacheinfo: Unable to detect cache hierarchy for CPU 0 vm-test-run-wal2json> server # [ 0.078446] rcu: Hierarchical SRCU implementation. vm-test-run-wal2json> server # [ 0.078548] rcu: Max phase no-delay instances is 1000. vm-test-run-wal2json> server # [ 0.080039] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-wal2json> server # [ 0.087928] fsl-mc MSI: its@8080000 domain created vm-test-run-wal2json> server # [ 0.089909] EFI services will not be available. vm-test-run-wal2json> server # [ 0.092039] smp: Bringing up secondary CPUs ... vm-test-run-wal2json> server # [ 0.096440] Detected PIPT I-cache on CPU1 vm-test-run-wal2json> server # [ 0.097618] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000 vm-test-run-wal2json> server # [ 0.098297] GICv3: CPU1: using allocated LPI pending table @0x0000000100b30000 vm-test-run-wal2json> server # [ 0.099816] CPU1: Booted secondary processor 0x0000000001 [0x000f0510] vm-test-run-wal2json> server # [ 0.104108] smp: Brought up 1 node, 2 CPUs vm-test-run-wal2json> server # [ 0.104329] SMP: Total of 2 processors activated. vm-test-run-wal2json> server # [ 0.104378] CPU: All CPU(s) started at EL1 vm-test-run-wal2json> server # [ 0.104553] CPU features: detected: Branch Target Identification vm-test-run-wal2json> server # [ 0.104607] CPU features: detected: 32-bit EL0 Support vm-test-run-wal2json> server # [ 0.104637] CPU features: detected: 32-bit EL1 Support vm-test-run-wal2json> server # [ 0.104662] CPU features: detected: ARMv8.4 Translation Table Level vm-test-run-wal2json> server # [ 0.104695] CPU features: detected: Instruction cache invalidation not required for I/D coherence vm-test-run-wal2json> server # [ 0.104737] CPU features: detected: Data cache clean to the PoU not required for I/D coherence vm-test-run-wal2json> server # [ 0.104806] CPU features: detected: Common not Private translations vm-test-run-wal2json> server # [ 0.104830] CPU features: detected: CRC32 instructions vm-test-run-wal2json> server # [ 0.104855] CPU features: detected: Data cache clean to Point of Deep Persistence vm-test-run-wal2json> server # [ 0.104885] CPU features: detected: Data cache clean to Point of Persistence vm-test-run-wal2json> server # [ 0.104913] CPU features: detected: Data independent timing control (DIT) vm-test-run-wal2json> server # [ 0.104940] CPU features: detected: E0PD vm-test-run-wal2json> server # [ 0.104962] CPU features: detected: Enhanced Counter Virtualization vm-test-run-wal2json> server # [ 0.104985] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) vm-test-run-wal2json> server # [ 0.105009] CPU features: detected: Enhanced Privileged Access Never vm-test-run-wal2json> server # [ 0.105035] CPU features: detected: Enhanced Virtualization Traps vm-test-run-wal2json> server # [ 0.105059] CPU features: detected: Fine Grained Traps vm-test-run-wal2json> server # [ 0.105109] CPU features: detected: Generic authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.105203] CPU features: detected: RCpc load-acquire (LDAPR) vm-test-run-wal2json> server # [ 0.105248] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2) vm-test-run-wal2json> server # [ 0.105277] CPU features: detected: LSE atomic instructions vm-test-run-wal2json> server # [ 0.105301] CPU features: detected: Memory Copy and Memory Set instructions vm-test-run-wal2json> server # [ 0.105323] CPU features: detected: Privileged Access Never vm-test-run-wal2json> server # [ 0.105347] CPU features: detected: RAS Extension Support vm-test-run-wal2json> server # [ 0.105579] CPU features: detected: Random Number Generator vm-test-run-wal2json> server # [ 0.105610] CPU features: detected: Speculation barrier (SB) vm-test-run-wal2json> server # [ 0.105632] CPU features: detected: Stage-2 Force Write-Back vm-test-run-wal2json> server # [ 0.105654] CPU features: detected: Trap EL0 IMPLEMENTATION DEFINED functionality vm-test-run-wal2json> server # [ 0.105679] CPU features: detected: TLB range maintenance instructions vm-test-run-wal2json> server # [ 0.105701] CPU features: detected: WFx with timeout vm-test-run-wal2json> server # [ 0.105742] CPU features: detected: Speculative Store Bypassing Safe (SSBS) vm-test-run-wal2json> server # [ 0.105766] CPU features: detected: Scalable Vector Extension vm-test-run-wal2json> server # [ 0.111840] alternatives: applying system-wide alternatives vm-test-run-wal2json> server # [ 0.127917] CPU features: detected: Hardware dirty bit management on CPU0-1 vm-test-run-wal2json> server # [ 0.129021] SVE: maximum available vector length 256 bytes per vector vm-test-run-wal2json> server # [ 0.129127] SVE: default vector length 64 bytes per vector vm-test-run-wal2json> server # [ 0.142959] Memory: 3922824K/4194304K available (23296K kernel code, 6546K rwdata, 24596K rodata, 4416K init, 1047K bss, 223164K reserved, 32768K cma-reserved) vm-test-run-wal2json> server # [ 0.166188] devtmpfs: initialized vm-test-run-wal2json> server # [ 0.192919] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns vm-test-run-wal2json> server # [ 0.193365] futex hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.196411] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL vm-test-run-wal2json> server # [ 0.196501] 0 pages in range for non-PLT usage vm-test-run-wal2json> server # [ 0.196543] 509248 pages in range for PLT usage vm-test-run-wal2json> server # [ 0.198892] pinctrl core: initialized pinctrl subsystem vm-test-run-wal2json> server # [ 0.211007] DMI not present or invalid. vm-test-run-wal2json> server # [ 0.232206] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-wal2json> server # [ 0.244414] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations vm-test-run-wal2json> server # [ 0.245541] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-wal2json> server # [ 0.246901] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-wal2json> server # [ 0.247172] audit: initializing netlink subsys (disabled) vm-test-run-wal2json> server # [ 0.249357] audit: type=2000 audit(0.208:1): state=initialized audit_enabled=0 res=1 vm-test-run-wal2json> server # [ 0.255193] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-wal2json> server # [ 0.255247] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-wal2json> server # [ 0.255306] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-wal2json> server # [ 0.255333] thermal_sys: Registered thermal governor 'user_space' vm-test-run-wal2json> server # [ 0.255356] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-wal2json> server # [ 0.256066] cpuidle: using governor ladder vm-test-run-wal2json> server # [ 0.257063] cpuidle: using governor menu vm-test-run-wal2json> server # [ 0.259021] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. vm-test-run-wal2json> server # [ 0.260153] ASID allocator initialised with 65536 entries vm-test-run-wal2json> server # [ 0.268293] Serial: AMBA PL011 UART driver vm-test-run-wal2json> server # [ 0.317794] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 vm-test-run-wal2json> server # [ 0.319522] printk: legacy console [ttyAMA0] enabled vm-test-run-wal2json> server # [ 0.358628] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.358930] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-wal2json> server # [ 0.359031] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.359200] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page vm-test-run-wal2json> server # [ 0.359581] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.359679] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-wal2json> server # [ 0.359772] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.359863] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page vm-test-run-wal2json> server # [ 0.372448] fbcon: Taking over console vm-test-run-wal2json> server # [ 0.373211] ACPI: Interpreter disabled. vm-test-run-wal2json> server # [ 0.380511] iommu: Default domain type: Translated vm-test-run-wal2json> server # [ 0.380667] iommu: DMA domain TLB invalidation policy: strict mode vm-test-run-wal2json> server # [ 0.386787] SCSI subsystem initialized vm-test-run-wal2json> server # [ 0.389178] usbcore: registered new interface driver usbfs vm-test-run-wal2json> server # [ 0.389499] usbcore: registered new interface driver hub vm-test-run-wal2json> server # [ 0.389804] usbcore: registered new device driver usb vm-test-run-wal2json> server # [ 0.392480] pps_core: LinuxPPS API ver. 1 registered vm-test-run-wal2json> server # [ 0.392760] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti vm-test-run-wal2json> server # [ 0.392972] PTP clock support registered vm-test-run-wal2json> server # [ 0.393359] EDAC MC: Ver: 3.0.0 vm-test-run-wal2json> server # [ 0.394924] scmi_core: SCMI protocol bus registered vm-test-run-wal2json> server # [ 0.398043] FPGA manager framework vm-test-run-wal2json> server # [ 0.399123] Advanced Linux Sound Architecture Driver Initialized. vm-test-run-wal2json> server # [ 0.407469] vgaarb: loaded vm-test-run-wal2json> server # [ 0.411996] clocksource: Switched to clocksource arch_sys_counter vm-test-run-wal2json> server # [ 0.416721] VFS: Disk quotas dquot_6.6.0 vm-test-run-wal2json> server # [ 0.416980] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-wal2json> server # [ 0.425684] netfs: FS-Cache loaded vm-test-run-wal2json> server # [ 0.426841] pnp: PnP ACPI: disabled vm-test-run-wal2json> server # [ 0.450587] NET: Registered PF_INET protocol family vm-test-run-wal2json> server # [ 0.451689] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-wal2json> server # [ 0.562211] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.562778] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.564131] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.565200] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) vm-test-run-wal2json> server # [ 0.566325] TCP: Hash tables configured (established 32768 bind 32768) vm-test-run-wal2json> server # [ 0.567692] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear) vm-test-run-wal2json> server # [ 0.568507] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.568893] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.570231] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-wal2json> server # [ 0.570797] NET: Registered PF_XDP protocol family vm-test-run-wal2json> server # [ 0.571278] PCI: CLS 0 bytes, default 64 vm-test-run-wal2json> server # [ 0.574788] kvm [1]: HYP mode not available vm-test-run-wal2json> server # [ 0.575698] Trying to unpack rootfs image as initramfs... vm-test-run-wal2json> server # [ 0.676331] Initialise system trusted keyrings vm-test-run-wal2json> server # [ 0.677933] workingset: timestamp_bits=42 max_order=20 bucket_order=0 vm-test-run-wal2json> server # [ 0.682077] squashfs: version 4.0 (2009/01/31) Phillip Lougher vm-test-run-wal2json> server # [ 0.682739] 9p: Installing v9fs 9p2000 file system support vm-test-run-wal2json> server # [ 0.740186] Key type asymmetric registered vm-test-run-wal2json> server # [ 0.740681] Asymmetric key parser 'x509' registered vm-test-run-wal2json> server # [ 0.741498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) vm-test-run-wal2json> server # [ 0.743183] io scheduler mq-deadline registered vm-test-run-wal2json> server # [ 0.743348] io scheduler kyber registered vm-test-run-wal2json> server # [ 0.770323] pl061_gpio 9030000.pl061: PL061 GPIO chip registered vm-test-run-wal2json> server # [ 0.775016] ledtrig-cpu: registered to indicate activity on CPUs vm-test-run-wal2json> server # [ 0.778685] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: vm-test-run-wal2json> server # [ 0.779280] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 vm-test-run-wal2json> server # [ 0.781528] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 vm-test-run-wal2json> server # [ 0.781765] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 vm-test-run-wal2json> server # [ 0.782256] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits vm-test-run-wal2json> server # [ 0.782740] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] vm-test-run-wal2json> server # [ 0.784127] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 vm-test-run-wal2json> server # [ 0.784553] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-wal2json> server # [ 0.784835] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.784952] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.785060] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.786069] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.789781] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.790165] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.790581] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.791051] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.791202] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.791759] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.791898] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.792005] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.792104] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.793649] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.794072] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.794243] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.794578] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.795054] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.795234] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.795327] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.795429] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.796578] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.796785] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.796880] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.796987] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.797409] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.797539] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] vm-test-run-wal2json> server # [ 0.797625] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.797726] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.798129] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.798272] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.798360] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.798464] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.798563] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.798948] pci 0000:00:08.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.799078] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.799178] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.799556] pci 0000:00:09.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.799687] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.800113] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.801431] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.801608] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.802060] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.802392] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.802502] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.802610] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.803271] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.803426] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.803523] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.803632] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.806411] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned vm-test-run-wal2json> server # [ 0.806823] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned vm-test-run-wal2json> server # [ 0.807247] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.807479] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.807658] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.809512] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.809853] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.810101] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.810242] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.810372] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.810504] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.810629] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.811100] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.811475] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned vm-test-run-wal2json> server # [ 0.811615] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned vm-test-run-wal2json> server # [ 0.812211] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned vm-test-run-wal2json> server # [ 0.812391] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned vm-test-run-wal2json> server # [ 0.813034] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned vm-test-run-wal2json> server # [ 0.813526] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned vm-test-run-wal2json> server # [ 0.813647] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned vm-test-run-wal2json> server # [ 0.813756] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned vm-test-run-wal2json> server # [ 0.813862] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned vm-test-run-wal2json> server # [ 0.813962] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned vm-test-run-wal2json> server # [ 0.814062] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned vm-test-run-wal2json> server # [ 0.814167] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned vm-test-run-wal2json> server # [ 0.814284] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned vm-test-run-wal2json> server # [ 0.814403] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned vm-test-run-wal2json> server # [ 0.814499] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned vm-test-run-wal2json> server # [ 0.814595] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned vm-test-run-wal2json> server # [ 0.814695] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned vm-test-run-wal2json> server # [ 0.814795] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned vm-test-run-wal2json> server # [ 0.814899] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned vm-test-run-wal2json> server # [ 0.814992] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned vm-test-run-wal2json> server # [ 0.815085] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned vm-test-run-wal2json> server # [ 0.815371] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.815473] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.815569] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.817502] pci 0000:00:0a.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.875610] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.879923] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.882390] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.885144] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.887235] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.890691] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.894380] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.898280] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.901478] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.904900] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.907201] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.925050] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-wal2json> server # [ 0.933739] msm_serial: driver initialized vm-test-run-wal2json> server # [ 0.934643] SuperH (H)SCI(F) driver initialized vm-test-run-wal2json> server # [ 0.935019] STM32 USART driver initialized vm-test-run-wal2json> server # [ 0.990801] loop: module loaded vm-test-run-wal2json> server # [ 0.991422] virtio_blk virtio5: 2/0/0 default/read/poll queues vm-test-run-wal2json> server # [ 0.996603] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-wal2json> server # [ 1.007683] megasas: 07.727.03.00-rc1 vm-test-run-wal2json> server # [ 1.013258] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] vm-test-run-wal2json> server # [ 1.015547] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.017292] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.018974] Using buffer write method vm-test-run-wal2json> server # [ 1.019560] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] vm-test-run-wal2json> server # [ 1.022341] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.022682] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.024221] Using buffer write method vm-test-run-wal2json> server # [ 1.025060] Concatenating MTD devices: vm-test-run-wal2json> server # [ 1.025330] (0): "0.flash" vm-test-run-wal2json> server # [ 1.025393] (1): "0.flash" vm-test-run-wal2json> server # [ 1.025446] into device "0.flash" vm-test-run-wal2json> server # [ 1.030955] Freeing initrd memory: 10684K vm-test-run-wal2json> server # [ 1.052671] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-wal2json> server # [ 1.065306] thunder_xcv, ver 1.0 vm-test-run-wal2json> server # [ 1.065582] thunder_bgx, ver 1.0 vm-test-run-wal2json> server # [ 1.065821] nicpf, ver 1.0 vm-test-run-wal2json> server # [ 1.069365] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version vm-test-run-wal2json> server # [ 1.069650] hns3: Copyright (c) 2017 Huawei Corporation. vm-test-run-wal2json> server # [ 1.070241] hclge is initializing vm-test-run-wal2json> server # [ 1.070508] e1000: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.070604] e1000: Copyright (c) 1999-2006 Intel Corporation. vm-test-run-wal2json> server # [ 1.070798] e1000e: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.071103] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. vm-test-run-wal2json> server # [ 1.071343] igb: Intel(R) Gigabit Ethernet Network Driver vm-test-run-wal2json> server # [ 1.071614] igb: Copyright (c) 2007-2014 Intel Corporation. vm-test-run-wal2json> server # [ 1.071860] igbvf: Intel(R) Gigabit Virtual Function Network Driver vm-test-run-wal2json> server # [ 1.072856] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. vm-test-run-wal2json> server # [ 1.073652] sky2: driver version 1.30 vm-test-run-wal2json> server # [ 1.083015] ehci-pci 0000:00:0a.0: EHCI Host Controller vm-test-run-wal2json> server # [ 1.083566] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 vm-test-run-wal2json> server # [ 1.083914] usbcore: registered new interface driver usb-storage vm-test-run-wal2json> server # [ 1.084987] usbcore: registered new interface driver usbserial_generic vm-test-run-wal2json> server # [ 1.085743] usbserial: USB Serial support registered for generic vm-test-run-wal2json> server # [ 1.086758] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 vm-test-run-wal2json> server # [ 1.096370] rtc-pl031 9010000.pl031: registered as rtc0 vm-test-run-wal2json> server # [ 1.096366] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 vm-test-run-wal2json> server # [ 1.097271] rtc-pl031 9010000.pl031: setting system clock to 2026-11-02T19:31:53 UTC (1793647913) vm-test-run-wal2json> server # [ 1.098977] i2c_dev: i2c /dev entries driver vm-test-run-wal2json> server # [ 1.104989] hub 1-0:1.0: USB hub found vm-test-run-wal2json> server # [ 1.105518] hub 1-0:1.0: 6 ports detected vm-test-run-wal2json> server # [ 1.114056] sdhci: Secure Digital Host Controller Interface driver vm-test-run-wal2json> server # [ 1.114370] sdhci: Copyright(c) Pierre Ossman vm-test-run-wal2json> server # [ 1.116208] Synopsys Designware Multimedia Card Interface Driver vm-test-run-wal2json> server # [ 1.118350] sdhci-pltfm: SDHCI platform and OF driver helper vm-test-run-wal2json> server # [ 1.125727] hid: raw HID events driver (C) Jiri Kosina vm-test-run-wal2json> server # [ 1.127577] usbcore: registered new interface driver usbhid vm-test-run-wal2json> server # [ 1.127751] usbhid: USB HID core driver vm-test-run-wal2json> server # [ 1.137300] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available vm-test-run-wal2json> server # [ 1.150644] drop_monitor: Initializing network drop monitor service vm-test-run-wal2json> server # [ 1.151894] NET: Registered PF_INET6 protocol family vm-test-run-wal2json> server # [ 1.173053] Segment Routing with IPv6 vm-test-run-wal2json> server # [ 1.173410] In-situ OAM (IOAM) with IPv6 vm-test-run-wal2json> server # [ 1.174041] NET: Registered PF_PACKET protocol family vm-test-run-wal2json> server # [ 1.176074] 9pnet: Installing 9P2000 support vm-test-run-wal2json> server # [ 1.181498] Key type dns_resolver registered vm-test-run-wal2json> server # [ 1.219131] registered taskstats version 1 vm-test-run-wal2json> server # [ 1.222001] Loading compiled-in X.509 certificates vm-test-run-wal2json> server # [ 1.281575] Demotion targets for Node 0: null vm-test-run-wal2json> server # [ 1.284883] Key type .fscrypt registered vm-test-run-wal2json> server # [ 1.285072] Key type fscrypt-provisioning registered vm-test-run-wal2json> server # [ 1.294923] input: gpio-keys as /devices/platform/gpio-keys/input/input0 vm-test-run-wal2json> server # [ 1.340223] clk: Disabling unused clocks vm-test-run-wal2json> server # [ 1.340812] PM: genpd: Disabling unused power domains vm-test-run-wal2json> server # [ 1.341146] ALSA device list: vm-test-run-wal2json> server # [ 1.341396] No soundcards found. vm-test-run-wal2json> server # [ 1.354807] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-wal2json> server # [ 1.424596] Freeing unused kernel memory: 4416K vm-test-run-wal2json> server # [ 1.426150] Run /init as init process vm-test-run-wal2json> server # [ 1.540875] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 vm-test-run-wal2json> server # [ 1.678108] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 vm-test-run-wal2json> server # [ 1.812391] usb 1-2: new high-speed USB device number 3 using ehci-pci vm-test-run-wal2json> server # [ 1.991010] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 vm-test-run-wal2json> server # [ 1.992842] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 vm-test-run-wal2json> server # [ 2.051805] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev vm-test-run-wal2json> server # [ 2.181144] [drm] pci: virtio-gpu-pci detected at 0000:00:09.0 vm-test-run-wal2json> server # [ 2.182174] [drm] features: -virgl +edid -resource_blob -host_visible vm-test-run-wal2json> server # [ 2.182202] [drm] features: -context_init vm-test-run-wal2json> server # [ 2.185099] [drm] number of scanouts: 1 vm-test-run-wal2json> server # [ 2.185226] [drm] number of cap sets: 0 vm-test-run-wal2json> server # [ 2.197447] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:09.0 on minor 0 vm-test-run-wal2json> server # [ 2.232351] Console: switching to colour frame buffer device 160x50 vm-test-run-wal2json> server # [ 2.243361] virtio-pci 0000:00:09.0: [drm] fb0: virtio_gpudrmfb frame buffer device vm-test-run-wal2json> server # [ 5.215333] EXT4-fs (vda): mounted filesystem 443809ee-d7b3-40ba-8886-5595b3cd00c4 r/w with ordered data mode. Quota mode: none. vm-test-run-wal2json> server # [ 7.838131] EXT4-fs (vda): re-mounted 443809ee-d7b3-40ba-8886-5595b3cd00c4. vm-test-run-wal2json> server # [ 7.860803] booting system configuration /nix/store/j4gsgzj4fy9yqawqmf0pn2wmwcsvbzji-nixos-system-server-test vm-test-run-wal2json> server # [ 21.499783] systemd[1]: systemd 258.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) vm-test-run-wal2json> server # [ 21.511007] systemd[1]: Detected virtualization qemu. vm-test-run-wal2json> server # [ 21.516813] systemd[1]: Detected architecture arm64. vm-test-run-wal2json> server # [ 21.521747] systemd[1]: Detected first boot. vm-test-run-wal2json> server # [ 21.555416] systemd[1]: Initializing machine ID from random generator. vm-test-run-wal2json> server # [ 21.591222] systemd[1]: Hostname set to . vm-test-run-wal2json> server # [ 22.857111] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-wal2json> server # [ 24.389143] NET: Registered PF_VSOCK protocol family vm-test-run-wal2json> server # [ 24.432850] Guest personality initialized and is inactive vm-test-run-wal2json> server # [ 24.438106] VMCI host device registered (name=vmci, major=10, minor=261) vm-test-run-wal2json> server # [ 24.441196] Initialized host personality vm-test-run-wal2json> server # [ 24.698528] systemd[1]: Applying preset policy. vm-test-run-wal2json> server # [ 28.601841] systemd[1]: Populated /etc with preset unit settings. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 32.374189] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-wal2json> server # [ 32.593213] systemd[1]: Created slice Slice /system/getty. vm-test-run-wal2json> server # [ 32.607512] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-wal2json> server # [ 32.620456] systemd[1]: Created slice User and Session Slice. vm-test-run-wal2json> server # [ 32.629746] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-wal2json> server # [ 32.635478] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-wal2json> server # [ 32.641580] systemd[1]: Expecting device /dev/hvc0... vm-test-run-wal2json> server # [ 32.647177] systemd[1]: Expecting device /dev/ttyAMA0... vm-test-run-wal2json> server # [ 32.652463] systemd[1]: Expecting device /sys/subsystem/net/devices/eth1... vm-test-run-wal2json> server # [ 32.656919] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-wal2json> server # [ 32.661456] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-wal2json> server # [ 32.665728] systemd[1]: Reached target Path Units. vm-test-run-wal2json> server # [ 32.671189] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 32.676741] systemd[1]: Reached target Slice Units. vm-test-run-wal2json> server # [ 32.681239] systemd[1]: Reached target Swaps. vm-test-run-wal2json> server # [ 32.719559] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-wal2json> server # [ 32.746192] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-wal2json> server # [ 32.758105] systemd[1]: Listening on Journal Audit Socket. vm-test-run-wal2json> server # [ 32.765312] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-wal2json> server # [ 32.771262] systemd[1]: Listening on Journal Sockets. vm-test-run-wal2json> server # [ 32.781619] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-wal2json> server # [ 32.786343] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 32.793425] systemd[1]: Listening on udev Control Socket. vm-test-run-wal2json> server # [ 32.798749] systemd[1]: Listening on udev Kernel Socket. vm-test-run-wal2json> server # [ 32.845609] systemd[1]: Mounting Huge Pages File System... vm-test-run-wal2json> server # [ 32.887189] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-wal2json> server # [ 32.938195] systemd[1]: Mounting Kernel Debug File System... vm-test-run-wal2json> server # [ 32.986741] systemd[1]: Mounting Kernel Trace File System... vm-test-run-wal2json> server # [ 33.152579] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-wal2json> server # [ 33.266554] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-wal2json> server # [ 33.283483] systemd[1]: Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs). vm-test-run-wal2json> server # [ 33.406928] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-wal2json> server # [ 33.420031] systemd[1]: Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm). vm-test-run-wal2json> server # [ 33.425799] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 33.554997] systemd[1]: Starting Load Kernel Module fuse... vm-test-run-wal2json> server # [ 33.567211] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 33.580725] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 33.683698] systemd[1]: Starting Journal Service... vm-test-run-wal2json> server # [ 33.785892] systemd[1]: Starting Load Kernel Modules... vm-test-run-wal2json> server # [ 33.878776] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-wal2json> server # [ 33.930547] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-wal2json> server # [ 33.948208] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 34.027095] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-wal2json> server # [ 34.113726] systemd[1]: Mounted Huge Pages File System. vm-test-run-wal2json> server # [ 34.120924] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-wal2json> server # [ 34.132804] systemd[1]: Mounted Kernel Debug File System. vm-test-run-wal2json> server # [ 34.144919] systemd[1]: Mounted Kernel Trace File System. vm-test-run-wal2json> server # [ 34.169014] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-wal2json> server # [ 34.191421] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-wal2json> server # [ 34.281219] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-wal2json> server # [ 34.759563] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-wal2json> server # [ 34.783392] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-wal2json> server # [ 35.151900] systemd[1]: Finished Load Kernel Modules. vm-test-run-wal2json> server # [ 35.252590] systemd[1]: Starting Firewall... vm-test-run-wal2json> server # [ 35.313928] fuse: init (API version 7.41) vm-test-run-wal2json> server # [ 35.325605] systemd[1]: Starting Apply Kernel Variables... vm-test-run-wal2json> server # [ 35.389991] EXT4-fs (vda): re-mounted 443809ee-d7b3-40ba-8886-5595b3cd00c4. vm-test-run-wal2json> server # [ 35.465681] systemd[1]: modprobe@fuse.service: Deactivated successfully. vm-test-run-wal2json> server # [ 35.482947] systemd[1]: Finished Load Kernel Module fuse. vm-test-run-wal2json> server # [ 35.535636] systemd-journald[400]: Collecting audit messages is enabled. vm-test-run-wal2json> server # [ 35.548998] systemd[1]: Mounting FUSE Control File System... vm-test-run-wal2json> server # [ 35.604806] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-wal2json> server # [ 35.626068] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 35.709866] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-wal2json> server # [ 35.720749] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 35.906993] systemd[1]: Mounted FUSE Control File System. vm-test-run-wal2json> server # [ 36.571672] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-wal2json> server # [ 36.590780] systemd[1]: Reached target First Boot Complete. vm-test-run-wal2json> server # [ 36.964644] systemd[1]: Finished Apply Kernel Variables. vm-test-run-wal2json> server # [ 37.024707] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-wal2json> server # [ 37.092993] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-wal2json> server # [ 37.357580] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-wal2json> server # [ 38.284625] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-wal2json> server # [ 38.308703] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-wal2json> server # [ 38.353828] systemd[1]: Mounting /run/wrappers... vm-test-run-wal2json> server # [ 38.413518] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-wal2json> server # [ 38.772839] systemd[1]: Started Journal Service. vm-test-run-wal2json> server # [ 38.745609] systemd-modules-load[401]: Module 'atkbd' is built in vm-test-run-wal2json> server # [ 38.779695] systemd-modules-load[401]: Module 'loop' is built in vm-test-run-wal2json> server # [ 38.861503] systemd-oomd[402]: No swap; memory pressure usage will be degraded vm-test-run-wal2json> server # [ 38.939810] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-wal2json> server # [ 38.977163] systemd[1]: Mounted /run/wrappers. vm-test-run-wal2json> server # [ 38.983861] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 39.003999] systemd[1]: Listening on Boot Entries Service Socket. vm-test-run-wal2json> server # [ 39.034769] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 39.079242] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 39.122545] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-wal2json> server # [ 39.926324] systemd-journald[400]: Received client request to flush runtime journal. vm-test-run-wal2json> server # [ 40.642714] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-wal2json> server # [ 40.725659] systemd-udevd[428]: Using default interface naming scheme 'v258'. vm-test-run-wal2json> server # [ 40.738227] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-wal2json> server # [ 40.750966] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-wal2json> server # [ 40.755167] systemd[1]: Starting Create System Files and Directories... vm-test-run-wal2json> server # [ 42.863863] systemd[1]: Finished Create System Files and Directories. vm-test-run-wal2json> server # [ 42.905975] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-wal2json> server # [ 42.949105] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-wal2json> server # [ 43.010294] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-wal2json> server # [ 44.194159] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-wal2json> server # [ 45.482899] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-wal2json> server # [ 45.543283] systemd[1]: Starting Update is Completed... vm-test-run-wal2json> server # [ 46.324258] systemd[1]: Finished Update is Completed. vm-test-run-wal2json> server # [ 50.151716] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 50.158755] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 50.164451] systemd[1]: suid-sgid-wrappers.service: Consumed 3.048s CPU time, 5.6M memory peak. vm-test-run-wal2json> server # [ 53.090963] systemd[1]: Finished Firewall. vm-test-run-wal2json> server # [ 54.930428] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-wal2json> server # [ 54.939045] systemd[1]: Reached target System Initialization. vm-test-run-wal2json> server # [ 54.953098] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-wal2json> server # [ 54.959974] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-wal2json> server # [ 54.978479] systemd[1]: Reached target Timer Units. vm-test-run-wal2json> server # [ 54.985727] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-wal2json> server # [ 54.994273] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-wal2json> server # [ 55.005244] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-wal2json> server # [ 55.049518] systemd[1]: Starting OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK)... vm-test-run-wal2json> server # [ 55.063999] systemd[1]: Listening on Hostname Service Socket. vm-test-run-wal2json> server # [ 55.228006] (sh-issue)[638]: sshd-vsock.socket: Unable to locate executable '/usr/lib/systemd/systemd-ssh-issue': No such file or directory vm-test-run-wal2json> server # [ 55.260072] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK). vm-test-run-wal2json> server # [ 55.267826] systemd[1]: Reached target Socket Units. vm-test-run-wal2json> server # [ 55.281571] systemd[1]: Reached target Basic System. vm-test-run-wal2json> server # [ 55.318040] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-wal2json> server # [ 55.358115] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-wal2json> server # [ 55.419952] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 55.501603] systemd[1]: Started Reset console on configuration changes. vm-test-run-wal2json> server # [ 55.570657] systemd[1]: Starting resolvconf update... vm-test-run-wal2json> server # [ 55.662452] systemd[1]: Starting SSH Host Keys Generation... vm-test-run-wal2json> server # [ 57.013428] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-wal2json> server # [ 57.142072] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 57.161987] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 57.196803] nsncd[642]: Nov 02 19:32:49.548 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 57.267622] dbus-daemon[640]: dbus[640]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 57.285616] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 57.302598] systemd[1]: Starting User Login Management... vm-test-run-wal2json> server # [ 57.784070] systemd[1]: Started D-Bus System Message Bus. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 59.208173] systemd-logind[662]: New seat seat0. vm-test-run-wal2json> server # [ 59.287348] systemd[1]: Started User Login Management. vm-test-run-wal2json> server # [ 59.329827] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 59.519801] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 59.538237] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-wal2json> server # [ 59.539189] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-wal2json> server # [ 59.540283] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-wal2json> server # [ 59.558175] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 59.607087] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-wal2json> server # [ 59.622791] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 59.749213] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 60.147167] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 60.170801] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 60.543304] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 60.574891] nsncd[718]: Nov 02 19:32:52.965 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 60.585007] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 60.593372] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 61.240667] systemd[1]: Finished resolvconf update. vm-test-run-wal2json> server # [ 61.263810] systemd[1]: Reached target Preparation for Network. vm-test-run-wal2json> server # [ 61.300419] systemd[1]: Starting DHCP Client... vm-test-run-wal2json> server # [ 62.602611] sshd-keygen-start[671]: Generating public/private rsa key pair. vm-test-run-wal2json> server # [ 62.610021] sshd-keygen-start[671]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key vm-test-run-wal2json> server # [ 62.618325] sshd-keygen-start[671]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub vm-test-run-wal2json> server # [ 62.626938] sshd-keygen-start[671]: The key fingerprint is: vm-test-run-wal2json> server # [ 62.628451] sshd-keygen-start[671]: SHA256:bdbB/n6cDhEMkjQJ/3vqwTiyVRtawUL0GDNlAsgyYhA root@server vm-test-run-wal2json> server # [ 62.633534] sshd-keygen-start[671]: The key's randomart image is: vm-test-run-wal2json> server # [ 62.643158] sshd-keygen-start[671]: +---[RSA 4096]----+ vm-test-run-wal2json> server # [ 62.646581] sshd-keygen-start[671]: |E. . .o=@++ | vm-test-run-wal2json> server # [ 62.649500] sshd-keygen-start[671]: | o o o oo%.o | vm-test-run-wal2json> server # [ 62.654486] sshd-keygen-start[671]: |. . o + +oo | vm-test-run-wal2json> server # [ 62.657447] sshd-keygen-start[671]: | .oo... | vm-test-run-wal2json> server # [ 62.660194] sshd-keygen-start[671]: | S +=o. | vm-test-run-wal2json> server # [ 62.665027] sshd-keygen-start[671]: | o* +.. | vm-test-run-wal2json> server # [ 62.670549] sshd-keygen-start[671]: | . = = o...| vm-test-run-wal2json> server # [ 62.677298] sshd-keygen-start[671]: | + . +...o| vm-test-run-wal2json> server # [ 62.678799] sshd-keygen-start[671]: | . .o oo | vm-test-run-wal2json> server # [ 62.684950] sshd-keygen-start[671]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 63.053841] dhcpcd[760]: dhcpcd-10.2.4 starting vm-test-run-wal2json> server # [ 63.124511] dhcpcd[789]: dev: loaded udev vm-test-run-wal2json> server # [ 63.142337] sshd-keygen-start[786]: Generating public/private ed25519 key pair. vm-test-run-wal2json> server # [ 63.150161] sshd-keygen-start[786]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key vm-test-run-wal2json> server # [ 63.151448] sshd-keygen-start[786]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub vm-test-run-wal2json> server # [ 63.152398] sshd-keygen-start[786]: The key fingerprint is: vm-test-run-wal2json> server # [ 63.165495] sshd-keygen-start[786]: SHA256:RklOPzwwjMsEi5Ar6eonWeegOdaIwKv0ahRhuCor8Ic root@server vm-test-run-wal2json> server # [ 63.172974] sshd-keygen-start[786]: The key's randomart image is: vm-test-run-wal2json> server # [ 63.177207] sshd-keygen-start[786]: +--[ED25519 256]--+ vm-test-run-wal2json> server # [ 63.178465] sshd-keygen-start[786]: |o. .. o= | vm-test-run-wal2json> server # [ 63.180971] sshd-keygen-start[786]: |o+ . .o+.* | vm-test-run-wal2json> server # [ 63.183932] sshd-keygen-start[786]: |.+o .o .+ = | vm-test-run-wal2json> server # [ 63.191466] sshd-keygen-start[786]: |=. o. o | vm-test-run-wal2json> server # [ 63.195190] sshd-keygen-start[786]: |= . S | vm-test-run-wal2json> server # [ 63.198351] sshd-keygen-start[786]: |=+ o . . | vm-test-run-wal2json> server # [ 63.200863] sshd-keygen-start[786]: |B+O.+ | vm-test-run-wal2json> server # [ 63.203898] sshd-keygen-start[786]: |*@Eo.. | vm-test-run-wal2json> server # [ 63.206684] sshd-keygen-start[786]: |Bo=o | vm-test-run-wal2json> server # [ 63.211446] sshd-keygen-start[786]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 63.233075] systemd[1]: sshd-keygen.service: Deactivated successfully. vm-test-run-wal2json> server # [ 63.243476] systemd[1]: Finished SSH Host Keys Generation. vm-test-run-wal2json> server # [ 63.254885] systemd[1]: sshd-keygen.service: Consumed 2.877s CPU time, 2.9M memory peak. vm-test-run-wal2json> server # [ 63.428807] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-wal2json> server # [ 63.795673] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-wal2json> server # [ 63.984163] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-wal2json> server # [ 63.990592] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-wal2json> server # [ 64.006584] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 vm-test-run-wal2json> server # [ 64.011642] cfg80211: failed to load regulatory.db vm-test-run-wal2json> server # [ 64.545716] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-wal2json> server # [ 64.502191] dhcpcd[789]: eth0: waiting for carrier vm-test-run-wal2json> server # [ 64.513107] dhcpcd[789]: libudev: received NULL device vm-test-run-wal2json> server # [ 64.516752] dhcpcd[789]: libudev: received NULL device vm-test-run-wal2json> server # [ 64.521172] dhcpcd[789]: eth0: carrier acquired vm-test-run-wal2json> server # [ 64.659328] dhcpcd[789]: DUID 00:01:00:01:32:7b:a1:e9:52:54:00:12:34:56 vm-test-run-wal2json> server # [ 64.666568] dhcpcd[789]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 64.667710] dhcpcd[789]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-wal2json> server # [ 65.213209] dhcpcd[789]: eth0: soliciting a DHCP lease vm-test-run-wal2json> server # [ 65.235905] dhcpcd[789]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-wal2json> server # [ 65.262956] systemd[1]: Found device /dev/hvc0. vm-test-run-wal2json> server # [ 65.272767] dhcpcd[789]: eth0: probing address 10.0.2.15/24 vm-test-run-wal2json> server # [ 65.775201] systemd[1]: Found device /dev/ttyAMA0. vm-test-run-wal2json> server # [ 65.818702] systemd[1]: Started backdoor.service. vm-test-run-wal2json> server # connecting to host... vm-test-run-wal2json> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-wal2json> server: connected to guest root shell vm-test-run-wal2json> server: (connecting took 67.53 seconds) vm-test-run-wal2json> server: (finished: waiting for the VM to finish booting, in 67.53 seconds) vm-test-run-wal2json> server # [ 66.561310] dhcpcd[789]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 66.570486] dhcpcd[789]: eth0: Router Advertisement from fe80::2 vm-test-run-wal2json> server # [ 66.579380] dhcpcd[789]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-wal2json> server # [ 66.590233] dhcpcd[789]: eth0: adding route to fec0::/64 vm-test-run-wal2json> server # [ 66.602824] dhcpcd[789]: eth0: adding default route via fe80::2 vm-test-run-wal2json> server # [ 70.036640] systemd-logind[662]: Watching system buttons on /dev/input/event0 (gpio-keys) vm-test-run-wal2json> server # [ 70.053019] dhcpcd[789]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 70.075187] dhcpcd[789]: eth0: adding route to 10.0.2.0/24 vm-test-run-wal2json> server # [ 70.080517] dhcpcd[789]: eth0: adding default route via 10.0.2.2 vm-test-run-wal2json> server # [ 70.105168] (udev-worker)[849]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-wal2json> server # [ 70.134388] (udev-worker)[862]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 70.135611] (udev-worker)[849]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 70.979170] systemd[1]: Found device Virtio network device. vm-test-run-wal2json> server # [ 71.014279] systemd[1]: Starting Address configuration of eth1... vm-test-run-wal2json> server # [ 71.906956] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-wal2json> server # [ 72.172412] network-addresses-eth1-start[892]: adding address 192.168.1.1/24... done vm-test-run-wal2json> server # [ 72.476395] network-addresses-eth1-start[892]: adding address 2001:db8:1::1/64... done vm-test-run-wal2json> server # [ 72.849682] systemd[1]: Finished Address configuration of eth1. vm-test-run-wal2json> server # [ 72.910368] systemd[1]: Starting Networking Setup... vm-test-run-wal2json> server # [ 73.110683] systemd[1]: Started DHCP Client. vm-test-run-wal2json> server # [ 73.183232] dhcpcd[789]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 73.270087] dhcpcd[789]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 74.276411] dhcpcd[789]: eth0: rebinding lease of 10.0.2.15 vm-test-run-wal2json> server # [ 74.287363] dhcpcd[789]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 75.410614] systemd[1]: Finished Networking Setup. vm-test-run-wal2json> server # [ 75.444120] systemd[1]: Reached target Network. vm-test-run-wal2json> server # [ 75.497605] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 75.562780] systemd[1]: Starting SSH Daemon... vm-test-run-wal2json> server # [ 75.613297] systemd[1]: Starting Permit User Sessions... vm-test-run-wal2json> server # [ 76.265609] systemd[1]: Finished Permit User Sessions. vm-test-run-wal2json> server # [ 76.316469] systemd[1]: Started Getty on tty1. vm-test-run-wal2json> server # [ 76.326502] systemd[1]: Reached target Login Prompts. vm-test-run-wal2json> server # [ 76.490853] sshd[1029]: Server listening on 0.0.0.0 port 22. vm-test-run-wal2json> server # [ 76.507921] systemd[1]: Started SSH Daemon. vm-test-run-wal2json> server # [ 76.510465] sshd[1029]: Server listening on :: port 22. vm-test-run-wal2json> server # [ 78.395756] postgresql-pre-start[1050]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 78.405284] postgresql-pre-start[1050]: This user must also own the server process. vm-test-run-wal2json> server # [ 78.477584] postgresql-pre-start[1050]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 78.481343] postgresql-pre-start[1050]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 78.482981] postgresql-pre-start[1050]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 78.483545] postgresql-pre-start[1050]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 78.495288] postgresql-pre-start[1050]: fixing permissions on existing directory /var/lib/postgresql/15 ... ok vm-test-run-wal2json> server # [ 78.507763] postgresql-pre-start[1050]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 78.520467] postgresql-pre-start[1050]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 79.378361] postgresql-pre-start[1050]: selecting default max_connections ... 100 vm-test-run-wal2json> server # [ 79.540874] mousedev: PS/2 mouse device common for all mice vm-test-run-wal2json> server # [ 79.910606] postgresql-pre-start[1050]: selecting default shared_buffers ... 128MB vm-test-run-wal2json> server # [ 81.113552] systemd-logind[662]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) vm-test-run-wal2json> server # [ 90.303304] postgresql-pre-start[1050]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 90.327588] postgresql-pre-start[1050]: creating configuration files ... ok vm-test-run-wal2json> server # [ 94.174640] postgresql-pre-start[1050]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 105.539381] postgresql-pre-start[1050]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 108.309847] postgresql-pre-start[1050]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 108.325931] postgresql-pre-start[1050]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 108.327815] postgresql-pre-start[1050]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 108.337237] postgresql-pre-start[1050]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 108.343184] postgresql-pre-start[1050]: /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/bin/pg_ctl -D /var/lib/postgresql/15 -l logfile start vm-test-run-wal2json> server # [ 109.850294] postgres[1386]: [1386] LOG: starting PostgreSQL 15.19 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 109.858553] postgres[1386]: [1386] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 109.859947] postgres[1386]: [1386] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 109.869649] postgres[1386]: [1386] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 110.089506] postgres[1405]: [1405] LOG: database system was shut down at 2026-11-02 19:33:37 GMT vm-test-run-wal2json> server # [ 110.314885] postgres[1386]: [1386] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 110.446909] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 110.508070] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 112.267065] postgresql-setup-start[1437]: CREATE ROLE vm-test-run-wal2json> server # [ 112.530816] postgresql-setup-start[1439]: ALTER ROLE vm-test-run-wal2json> server # [ 112.579259] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 112.593628] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 112.601278] systemd[1]: Reached target Multi-User System. vm-test-run-wal2json> server # [ 112.607042] systemd[1]: Startup finished in 20.702s (kernel) + 1min 31.898s (userspace) = 1min 52.601s. vm-test-run-wal2json> server: (finished: waiting for unit multi-user.target, in 114.64 seconds) vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 0.99 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.51 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 15 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.52 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.87 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.78 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 15, in 2.17 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 15 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" vm-test-run-wal2json> server # [ 118.161290] sudo[1506]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 wal2json vm-test-run-wal2json> server # [ 118.383837] sudo[1506]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # pg_regress: could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 119.303134] postgres[1516]: [1516] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 119.316545] postgres[1516]: [1516] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 119.317226] postgres[1516]: [1516] STATEMENT: select vm-test-run-wal2json> server # [ 119.327557] postgres[1516]: 1 vm-test-run-wal2json> server # [ 119.334158] postgres[1516]: from vm-test-run-wal2json> server # [ 119.335283] postgres[1516]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 119.394713] postgres[1516]: [1516] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 119.402542] postgres[1516]: [1516] DETAIL: Streaming transactions committing after 0/152AC80, reading WAL from 0/152AC48. vm-test-run-wal2json> server # [ 119.403968] postgres[1516]: [1516] STATEMENT: select vm-test-run-wal2json> server # [ 119.410436] postgres[1516]: data vm-test-run-wal2json> server # [ 119.411273] postgres[1516]: from vm-test-run-wal2json> server # [ 119.421858] postgres[1516]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 119.423324] postgres[1516]: 'reg_test', vm-test-run-wal2json> server # [ 119.430225] postgres[1516]: null, vm-test-run-wal2json> server # [ 119.432512] postgres[1516]: null, vm-test-run-wal2json> server # [ 119.444089] postgres[1516]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 119.450453] postgres[1516]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 119.451212] postgres[1516]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 119.451838] postgres[1516]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 119.452310] postgres[1516]: 'format-version', '2', vm-test-run-wal2json> server # [ 119.458585] postgres[1516]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 119.461469] postgres[1516]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 119.465508] postgres[1516]: ) x; vm-test-run-wal2json> server # [ 119.466868] postgres[1516]: [1516] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 119.467560] postgres[1516]: [1516] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 119.468943] postgres[1516]: [1516] STATEMENT: select vm-test-run-wal2json> server # [ 119.470654] postgres[1516]: data vm-test-run-wal2json> server # [ 119.471381] postgres[1516]: from vm-test-run-wal2json> server # [ 119.473093] postgres[1516]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 119.473985] postgres[1516]: 'reg_test', vm-test-run-wal2json> server # [ 119.474704] postgres[1516]: null, vm-test-run-wal2json> server # [ 119.477752] postgres[1516]: null, vm-test-run-wal2json> server # [ 119.480774] postgres[1516]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 119.481721] postgres[1516]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 119.485091] postgres[1516]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 119.486396] postgres[1516]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 119.495301] postgres[1516]: 'format-version', '2', vm-test-run-wal2json> server # [ 119.502616] postgres[1516]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 119.503311] postgres[1516]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 119.510172] postgres[1516]: ) x; vm-test-run-wal2json> server # [ 119.971136] sudo[1506]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" , in 2.72 seconds) vm-test-run-wal2json> (using postmaster on Unix socket, default port) vm-test-run-wal2json> ============== running regression test queries ============== vm-test-run-wal2json> test wal2json ... ok 1136 ms vm-test-run-wal2json> vm-test-run-wal2json> ===================== vm-test-run-wal2json> All 1 tests passed. vm-test-run-wal2json> ===================== vm-test-run-wal2json> vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 15 after extension upgrade, in 2.72 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.55 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.54 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.50 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.59 seconds) vm-test-run-wal2json> subtest: switch to postgresql 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 130.935469] nixos[1558]: switching to system configuration /nix/store/sxd6kadjcgrv4ya7j21ygamx4w1imjyv-nixos-system-server-test vm-test-run-wal2json> server # [ 130.967586] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 130.978079] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 130.979672] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 130.986880] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 131.003576] postgres[1386]: [1386] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 131.014129] postgres[1386]: [1386] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 131.108499] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 131.128572] postgres[1386]: [1386] LOG: background worker "logical replication launcher" (PID 1413) exited with exit code 1 vm-test-run-wal2json> server # [ 131.142963] postgres[1401]: [1401] LOG: shutting down vm-test-run-wal2json> server # [ 131.157049] postgres[1401]: [1401] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 131.162877] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 131.505445] postgres[1401]: [1401] LOG: checkpoint complete: wrote 54 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.127 s, sync=0.107 s, total=0.363 s; sync files=48, longest=0.020 s, average=0.003 s; distance=149 kB, estimate=149 kB vm-test-run-wal2json> server # [ 131.671964] postgres[1386]: [1386] LOG: database system is shut down vm-test-run-wal2json> server # [ 131.794774] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 131.802878] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 131.821272] systemd[1]: postgresql.service: Consumed 18.646s CPU time, 91.2M memory peak, 45.9M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 138.818270] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:08.0/virtio7/input/input3 vm-test-run-wal2json> server # [ 139.497059] systemd[1]: Reload requested from client PID 1558 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 139.499096] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 145.779280] systemd[1]: Reloading finished in 6267 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 146.233665] systemd[1]: Starting Re-setup tmpfiles on a system that is already running.... vm-test-run-wal2json> server # [ 147.780285] systemd[1]: Finished Re-setup tmpfiles on a system that is already running.. vm-test-run-wal2json> server # [ 147.820502] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 147.953098] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 148.491207] dbus-daemon[640]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 148.724021] dbus-daemon[640]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 148.770593] dbus-send[1755]: method return time=1793648061.190007 sender=org.freedesktop.DBus -> destination=:1.5 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 148.883692] dbus-daemon[640]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 149.130989] dbus-daemon[640]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 149.149521] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 149.290139] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 149.417554] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 149.419028] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 149.484888] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 149.531283] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 149.541315] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 149.543048] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 149.543682] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 149.553234] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 149.555260] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 149.765859] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 149.949609] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 151.638459] postgresql-migrate-start[1780]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 151.647336] postgresql-migrate-start[1780]: This user must also own the server process. vm-test-run-wal2json> server # [ 151.733232] postgresql-migrate-start[1780]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 151.734052] postgresql-migrate-start[1780]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 151.735095] postgresql-migrate-start[1780]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 151.740642] postgresql-migrate-start[1780]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 151.742390] postgresql-migrate-start[1780]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 151.747877] postgresql-migrate-start[1780]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 151.759235] postgresql-migrate-start[1780]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 153.155215] postgresql-migrate-start[1780]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 153.999338] postgresql-migrate-start[1780]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 157.007566] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 157.014048] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 157.030349] systemd[1]: suid-sgid-wrappers.service: Consumed 2.900s CPU time, 3.3M memory peak. vm-test-run-wal2json> server # [ 157.086831] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 157.093423] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 157.569179] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 157.589270] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 164.944059] postgresql-migrate-start[1780]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 164.997683] postgresql-migrate-start[1780]: creating configuration files ... ok vm-test-run-wal2json> server # [ 167.371038] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 167.761336] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 167.762971] systemd[1]: Stopped Virtual Console Setup. vm-test-run-wal2json> server # [ 167.896073] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 168.731906] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-wal2json> server # [ 170.523604] postgresql-migrate-start[1780]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 172.937875] systemd[1]: Finished Virtual Console Setup. vm-test-run-wal2json> server # [ 174.807490] systemd-logind[662]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-wal2json> server # [ 178.545744] postgresql-migrate-start[1780]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 179.995645] postgresql-migrate-start[1780]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 179.997208] postgresql-migrate-start[1780]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 179.998970] postgresql-migrate-start[1780]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 180.003373] postgresql-migrate-start[1780]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 180.006277] postgresql-migrate-start[1780]: /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 183.707804] postgresql-migrate-start[1991]: Performing Consistency Checks vm-test-run-wal2json> server # [ 183.711783] postgresql-migrate-start[1991]: ----------------------------- vm-test-run-wal2json> server # [ 183.714862] postgresql-migrate-start[1991]: Checking cluster versions ok vm-test-run-wal2json> server # [ 185.895799] postgresql-migrate-start[1991]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 185.940855] postgresql-migrate-start[1991]: Checking database connection settings ok vm-test-run-wal2json> server # [ 186.009008] postgresql-migrate-start[1991]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 186.012577] postgresql-migrate-start[1991]: Checking for contrib/isn with bigint-passing mismatch ok vm-test-run-wal2json> server # [ 186.577063] postgresql-migrate-start[1991]: Checking data type usage ok vm-test-run-wal2json> server # [ 186.750043] postgresql-migrate-start[1991]: Checking for not-null constraint inconsistencies ok vm-test-run-wal2json> server # [ 187.338243] postgresql-migrate-start[1991]: Creating dump of global objects ok vm-test-run-wal2json> server # [ 189.165457] postgresql-migrate-start[1991]: Creating dump of database schemas ok vm-test-run-wal2json> server # [ 191.306040] postgresql-migrate-start[1991]: Checking for presence of required libraries ok vm-test-run-wal2json> server # [ 191.362773] postgresql-migrate-start[1991]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 191.429128] postgresql-migrate-start[1991]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 191.434800] postgresql-migrate-start[1991]: Checking for new cluster tablespace directories ok vm-test-run-wal2json> server # [ 191.440034] postgresql-migrate-start[1991]: If pg_upgrade fails after this point, you must re-initdb the vm-test-run-wal2json> server # [ 191.441321] postgresql-migrate-start[1991]: new cluster before continuing. vm-test-run-wal2json> server # [ 191.442279] postgresql-migrate-start[1991]: Performing Upgrade vm-test-run-wal2json> server # [ 191.444245] postgresql-migrate-start[1991]: ------------------ vm-test-run-wal2json> server # [ 191.485458] postgresql-migrate-start[1991]: Setting locale and encoding for new cluster ok vm-test-run-wal2json> server # [ 193.599898] postgresql-migrate-start[1991]: Analyzing all rows in the new cluster ok vm-test-run-wal2json> server # [ 194.497678] postgresql-migrate-start[1991]: Freezing all rows in the new cluster ok vm-test-run-wal2json> server # [ 194.809467] postgresql-migrate-start[1991]: Deleting files from new pg_xact ok vm-test-run-wal2json> server # [ 194.947389] postgresql-migrate-start[1991]: Copying old pg_xact to new server ok vm-test-run-wal2json> server # [ 195.250066] postgresql-migrate-start[1991]: Setting oldest XID for new cluster ok vm-test-run-wal2json> server # [ 196.145366] postgresql-migrate-start[1991]: Setting next transaction ID and epoch for new cluster ok vm-test-run-wal2json> server # [ 196.150887] postgresql-migrate-start[1991]: Deleting files from new pg_multixact/offsets ok vm-test-run-wal2json> server # [ 196.300978] postgresql-migrate-start[1991]: Copying old pg_multixact/offsets to new server ok vm-test-run-wal2json> server # [ 196.303932] postgresql-migrate-start[1991]: Deleting files from new pg_multixact/members ok vm-test-run-wal2json> server # [ 196.447013] postgresql-migrate-start[1991]: Copying old pg_multixact/members to new server ok vm-test-run-wal2json> server # [ 196.752007] postgresql-migrate-start[1991]: Setting next multixact ID and offset for new cluster ok vm-test-run-wal2json> server # [ 197.042678] postgresql-migrate-start[1991]: Resetting WAL archives ok vm-test-run-wal2json> server # [ 198.524137] postgresql-migrate-start[1991]: Setting frozenxid and minmxid counters in new cluster ok vm-test-run-wal2json> server # [ 198.865914] postgresql-migrate-start[1991]: Restoring global objects in the new cluster ok vm-test-run-wal2json> server # [ 200.737305] postgresql-migrate-start[1991]: Restoring database schemas in the new cluster ok vm-test-run-wal2json> server # [ 201.395319] postgresql-migrate-start[1991]: Copying user relation files ok vm-test-run-wal2json> server # [ 201.703583] postgresql-migrate-start[1991]: Setting next OID for new cluster ok vm-test-run-wal2json> server # [ 203.302466] postgresql-migrate-start[1991]: Sync data directory to disk ok vm-test-run-wal2json> server # [ 203.306501] postgresql-migrate-start[1991]: Creating script to delete old cluster ok vm-test-run-wal2json> server # [ 205.371100] postgresql-migrate-start[1991]: Checking for extension updates ok vm-test-run-wal2json> server # [ 205.667221] postgresql-migrate-start[1991]: Upgrade Complete vm-test-run-wal2json> server # [ 205.668131] postgresql-migrate-start[1991]: ---------------- vm-test-run-wal2json> server # [ 205.670850] postgresql-migrate-start[1991]: Optimizer statistics are not transferred by pg_upgrade. vm-test-run-wal2json> server # [ 205.671788] postgresql-migrate-start[1991]: Once you start the new server, consider running: vm-test-run-wal2json> server # [ 205.673641] postgresql-migrate-start[1991]: /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/bin/vacuumdb --all --analyze-in-stages vm-test-run-wal2json> server # [ 205.674720] postgresql-migrate-start[1991]: Running this script will delete the old cluster's data files: vm-test-run-wal2json> server # [ 205.675640] postgresql-migrate-start[1991]: ./delete_old_cluster.sh vm-test-run-wal2json> server # [ 205.724320] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 205.765909] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 207.154681] postgres[2151]: [2151] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 207.159787] postgres[2151]: [2151] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 207.162123] postgres[2151]: [2151] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 207.174193] postgres[2151]: [2151] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 207.241292] postgres[2157]: [2157] LOG: database system was shut down at 2026-11-02 19:35:18 GMT vm-test-run-wal2json> server # [ 207.316062] postgres[2151]: [2151] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 207.354417] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 207.387603] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 208.239384] postgresql-setup-start[2167]: ALTER ROLE vm-test-run-wal2json> server # [ 208.283243] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 208.297274] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # the following new units were started: postgresql-migrate.service, sys-devices-platform-4010000000.pcie-pci0000:00-0000:00:0b.0-virtio9-virtio\x2dports-vport9p0.device, sys-devices-virtual-input-mice.device, sys-devices-virtual-misc-rfkill.device, sys-devices-virtual-misc-tun.device, sys-devices-virtual-mtd-mtd0ro.device, sysinit-reactivation.target, systemd-rfkill.socket, systemd-tmpfiles-resetup.service, systemd-vconsole-setup.service vm-test-run-wal2json> server # [ 208.586253] nixos[1558]: finished switching to system configuration /nix/store/sxd6kadjcgrv4ya7j21ygamx4w1imjyv-nixos-system-server-test vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 0.69 seconds) vm-test-run-wal2json> server: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no' vm-test-run-wal2json> server: (finished: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no', in 0.14 seconds) vm-test-run-wal2json> (finished: subtest: switch to postgresql 17, in 87.83 seconds) vm-test-run-wal2json> subtest: Check last version of the extension after postgresql upgrade vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.36 seconds) vm-test-run-wal2json> (finished: subtest: Check last version of the extension after postgresql upgrade, in 0.36 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.36 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.44 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.37 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 17, in 1.17 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 211.406439] sudo[2193]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 211.578345] sudo[2193]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 212.122945] postgres[2200]: [2200] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 212.123900] postgres[2200]: [2200] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 212.125736] postgres[2200]: [2200] STATEMENT: select vm-test-run-wal2json> server # [ 212.127098] postgres[2200]: 1 vm-test-run-wal2json> server # [ 212.127623] postgres[2200]: from vm-test-run-wal2json> server # [ 212.130572] postgres[2200]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 212.171758] postgres[2200]: [2200] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 212.173530] postgres[2200]: [2200] DETAIL: Streaming transactions committing after 0/8034ED0, reading WAL from 0/8034E98. vm-test-run-wal2json> server # [ 212.174932] postgres[2200]: [2200] STATEMENT: select vm-test-run-wal2json> server # [ 212.175402] postgres[2200]: data vm-test-run-wal2json> server # [ 212.178266] postgres[2200]: from vm-test-run-wal2json> server # [ 212.179090] postgres[2200]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 212.181357] postgres[2200]: 'reg_test', vm-test-run-wal2json> server # [ 212.182295] postgres[2200]: null, vm-test-run-wal2json> server # [ 212.182875] postgres[2200]: null, vm-test-run-wal2json> server # [ 212.183632] postgres[2200]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 212.183927] postgres[2200]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 212.185733] postgres[2200]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 212.186079] postgres[2200]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 212.186372] postgres[2200]: 'format-version', '2', vm-test-run-wal2json> server # [ 212.186742] postgres[2200]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 212.187448] postgres[2200]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 212.187761] postgres[2200]: ) x; vm-test-run-wal2json> server # [ 212.189988] postgres[2200]: [2200] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 212.190433] postgres[2200]: [2200] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 212.191478] postgres[2200]: [2200] STATEMENT: select vm-test-run-wal2json> server # [ 212.192437] postgres[2200]: data vm-test-run-wal2json> server # [ 212.194012] postgres[2200]: from vm-test-run-wal2json> server # [ 212.194408] postgres[2200]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 212.195237] postgres[2200]: 'reg_test', vm-test-run-wal2json> server # [ 212.197701] postgres[2200]: null, vm-test-run-wal2json> server # [ 212.198422] postgres[2200]: null, vm-test-run-wal2json> server # [ 212.199376] postgres[2200]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 212.199700] postgres[2200]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 212.202274] postgres[2200]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 212.202941] postgres[2200]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 212.203432] postgres[2200]: 'format-version', '2', vm-test-run-wal2json> server # [ 212.203750] postgres[2200]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 212.204018] postgres[2200]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 212.205310] postgres[2200]: ) x; vm-test-run-wal2json> server # [ 212.458726] sudo[2193]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.51 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 562 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after extension upgrade, in 1.51 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.36 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.38 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.35 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.09 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 213.943732] sudo[2215]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 214.083121] sudo[2215]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 214.565187] postgres[2222]: [2222] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 214.566374] postgres[2222]: [2222] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 214.569038] postgres[2222]: [2222] STATEMENT: select vm-test-run-wal2json> server # [ 214.570400] postgres[2222]: 1 vm-test-run-wal2json> server # [ 214.571976] postgres[2222]: from vm-test-run-wal2json> server # [ 214.573157] postgres[2222]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 214.606563] postgres[2222]: [2222] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 214.608048] postgres[2222]: [2222] DETAIL: Streaming transactions committing after 0/803B920, reading WAL from 0/803B8E8. vm-test-run-wal2json> server # [ 214.609844] postgres[2222]: [2222] STATEMENT: select vm-test-run-wal2json> server # [ 214.610288] postgres[2222]: data vm-test-run-wal2json> server # [ 214.610556] postgres[2222]: from vm-test-run-wal2json> server # [ 214.611119] postgres[2222]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 214.611877] postgres[2222]: 'reg_test', vm-test-run-wal2json> server # [ 214.612190] postgres[2222]: null, vm-test-run-wal2json> server # [ 214.612450] postgres[2222]: null, vm-test-run-wal2json> server # [ 214.614516] postgres[2222]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 214.615550] postgres[2222]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 214.615876] postgres[2222]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 214.617151] postgres[2222]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 214.618486] postgres[2222]: 'format-version', '2', vm-test-run-wal2json> server # [ 214.619537] postgres[2222]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 214.620052] postgres[2222]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 214.620491] postgres[2222]: ) x; vm-test-run-wal2json> server # [ 214.621947] postgres[2222]: [2222] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 214.622682] postgres[2222]: [2222] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 214.623020] postgres[2222]: [2222] STATEMENT: select vm-test-run-wal2json> server # [ 214.623262] postgres[2222]: data vm-test-run-wal2json> server # [ 214.623484] postgres[2222]: from vm-test-run-wal2json> server # [ 214.623696] postgres[2222]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 214.623918] postgres[2222]: 'reg_test', vm-test-run-wal2json> server # [ 214.625271] postgres[2222]: null, vm-test-run-wal2json> server # [ 214.627788] postgres[2222]: null, vm-test-run-wal2json> server # [ 214.629160] postgres[2222]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 214.630031] postgres[2222]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 214.630586] postgres[2222]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 214.631001] postgres[2222]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 214.631276] postgres[2222]: 'format-version', '2', vm-test-run-wal2json> server # [ 214.631548] postgres[2222]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 214.635184] postgres[2222]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 214.636149] postgres[2222]: ) x; vm-test-run-wal2json> server # [ 214.920948] sudo[2215]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.37 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 507 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after installing the last version, in 1.37 seconds) vm-test-run-wal2json> subtest: switch to orioledb 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 221.230660] nixos[2229]: switching to system configuration /nix/store/x92yg82an9wrih717zwlv5qkx2r8n04s-nixos-system-server-test vm-test-run-wal2json> server # [ 221.242812] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 221.243778] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 221.254225] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 221.260137] postgres[2151]: [2151] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 221.263231] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 221.270399] postgres[2151]: [2151] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 221.345810] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 221.354417] postgres[2151]: [2151] LOG: background worker "logical replication launcher" (PID 2160) exited with exit code 1 vm-test-run-wal2json> server # [ 221.374807] postgres[2155]: [2155] LOG: shutting down vm-test-run-wal2json> server # [ 221.382909] postgres[2155]: [2155] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 221.389167] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 221.532980] postgres[2155]: [2155] LOG: checkpoint complete: wrote 57 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.041 s, sync=0.054 s, total=0.169 s; sync files=45, longest=0.013 s, average=0.002 s; distance=242 kB, estimate=242 kB; lsn=0/803C9C0, redo lsn=0/803C9C0 vm-test-run-wal2json> server # [ 221.574479] postgres[2151]: [2151] LOG: database system is shut down vm-test-run-wal2json> server # [ 221.634523] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 221.639611] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 221.646871] systemd[1]: postgresql.service: Consumed 2.250s CPU time, 22.3M memory peak, 264K written to disk. vm-test-run-wal2json> server # [ 221.686262] systemd[1]: postgresql-migrate.service: Deactivated successfully. vm-test-run-wal2json> server # [ 221.693550] systemd[1]: Stopped postgresql-migrate.service. vm-test-run-wal2json> server # [ 221.695569] systemd[1]: postgresql-migrate.service: Consumed 32.517s CPU time, 96.9M memory peak, 173.8M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 226.147592] systemd[1]: Reload requested from client PID 2229 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 226.151038] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 232.223387] systemd[1]: Reloading finished in 6063 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 232.538299] systemd[1]: Stopped target Reactivate sysinit units. vm-test-run-wal2json> server # [ 232.541802] systemd[1]: Stopping Reactivate sysinit units... vm-test-run-wal2json> server # [ 232.543529] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 232.583313] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 232.856119] dbus-daemon[640]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 232.978626] dbus-daemon[640]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 233.006417] dbus-send[2305]: method return time=1793648145.445994 sender=org.freedesktop.DBus -> destination=:1.7 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 233.085881] dbus-daemon[640]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 233.221280] dbus-daemon[640]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 233.227859] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 233.297656] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 233.321385] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 233.326632] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 233.391460] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 233.433059] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 233.469871] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 233.472170] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 233.491526] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 233.500420] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 233.515618] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 233.525294] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 233.907740] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 234.447540] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 237.392281] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 237.398597] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 237.405415] systemd[1]: suid-sgid-wrappers.service: Consumed 1.832s CPU time, 3.3M memory peak. vm-test-run-wal2json> server # [ 237.454021] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 237.515607] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 237.526766] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 237.767116] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 237.776041] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 238.962005] postgresql-pre-start[2388]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 238.967355] postgresql-pre-start[2388]: This user must also own the server process. vm-test-run-wal2json> server # [ 239.038938] postgresql-pre-start[2388]: Using language tag "en-US" for ICU locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 239.041848] postgresql-pre-start[2388]: The database cluster will be initialized with this locale configuration: vm-test-run-wal2json> server # [ 239.043321] postgresql-pre-start[2388]: locale provider: icu vm-test-run-wal2json> server # [ 239.043787] postgresql-pre-start[2388]: default collation: en-US vm-test-run-wal2json> server # [ 239.044119] postgresql-pre-start[2388]: LC_COLLATE: en_US.UTF-8 vm-test-run-wal2json> server # [ 239.046127] postgresql-pre-start[2388]: LC_CTYPE: en_US.UTF-8 vm-test-run-wal2json> server # [ 239.046859] postgresql-pre-start[2388]: LC_MESSAGES: en_US.UTF-8 vm-test-run-wal2json> server # [ 239.047467] postgresql-pre-start[2388]: LC_MONETARY: en_US.UTF-8 vm-test-run-wal2json> server # [ 239.048887] postgresql-pre-start[2388]: LC_NUMERIC: en_US.UTF-8 vm-test-run-wal2json> server # [ 239.049279] postgresql-pre-start[2388]: LC_TIME: en_US.UTF-8 vm-test-run-wal2json> server # [ 239.050380] postgresql-pre-start[2388]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 239.051336] postgresql-pre-start[2388]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 239.051743] postgresql-pre-start[2388]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 239.053693] postgresql-pre-start[2388]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 239.054375] postgresql-pre-start[2388]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 239.700446] postgresql-pre-start[2388]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 240.174366] postgresql-pre-start[2388]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 247.794280] postgresql-pre-start[2388]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 247.821855] postgresql-pre-start[2388]: creating configuration files ... ok vm-test-run-wal2json> server # [ 249.964999] postgresql-pre-start[2388]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 255.382132] postgresql-pre-start[2388]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 256.891647] postgresql-pre-start[2388]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 256.893773] postgresql-pre-start[2388]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 256.894361] postgresql-pre-start[2388]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 256.894780] postgresql-pre-start[2388]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 256.895097] postgresql-pre-start[2388]: /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 258.053559] postgres[2401]: [2401] LOG: registered custom resource manager "OrioleDB resource manager" with ID 129 vm-test-run-wal2json> server # [ 258.397327] postgres[2401]: [2401] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 258.471725] postgres[2401]: [2401] LOG: listening on IPv6 address "::1", port 5432 vm-test-run-wal2json> server # [ 258.475963] postgres[2401]: [2401] LOG: listening on IPv4 address "127.0.0.1", port 5432 vm-test-run-wal2json> server # [ 258.486982] postgres[2401]: [2401] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 258.580012] postgres[2407]: [2407] LOG: Cleanup of old files at startup. Checkpoint 0 vm-test-run-wal2json> server # [ 258.587843] postgres[2407]: [2407] LOG: database system was shut down at 2026-11-02 19:36:07 GMT vm-test-run-wal2json> server # [ 258.602088] postgres[2408]: [2408] LOG: orioledb background writer 0 started vm-test-run-wal2json> server # [ 258.698747] postgres[2401]: [2401] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 258.722833] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 258.763482] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 259.967042] postgresql-setup-start[2415]: CREATE EXTENSION vm-test-run-wal2json> server # [ 260.448464] postgresql-setup-start[2421]: CREATE ROLE vm-test-run-wal2json> server # [ 260.633495] postgresql-setup-start[2423]: ALTER ROLE vm-test-run-wal2json> server # [ 260.700026] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 260.713569] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 261.008052] nixos[2229]: finished switching to system configuration /nix/store/x92yg82an9wrih717zwlv5qkx2r8n04s-nixos-system-server-test vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" , in 0.36 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.33 seconds) vm-test-run-wal2json> (finished: subtest: switch to orioledb 17, in 46.78 seconds) vm-test-run-wal2json> subtest: Check upgrade path with orioledb 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.34 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.43 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.33 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with orioledb 17, in 1.10 seconds) vm-test-run-wal2json> subtest: Check pg_regress with orioledb 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" vm-test-run-wal2json> server # [ 263.226151] sudo[2446]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 wal2json vm-test-run-wal2json> server # [ 263.365301] sudo[2446]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 263.975796] postgres[2453]: [2453] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 263.982635] postgres[2453]: [2453] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 263.986198] postgres[2453]: [2453] STATEMENT: select vm-test-run-wal2json> server # [ 263.987841] postgres[2453]: 1 vm-test-run-wal2json> server # [ 263.988972] postgres[2453]: from vm-test-run-wal2json> server # [ 263.989518] postgres[2453]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 264.033012] postgres[2453]: [2453] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 264.035264] postgres[2453]: [2453] DETAIL: Streaming transactions committing after 0/15908A0, reading WAL from 0/1590850. vm-test-run-wal2json> server # [ 264.036649] postgres[2453]: [2453] STATEMENT: select vm-test-run-wal2json> server # [ 264.038940] postgres[2453]: data vm-test-run-wal2json> server # [ 264.040090] postgres[2453]: from vm-test-run-wal2json> server # [ 264.041302] postgres[2453]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 264.042868] postgres[2453]: 'reg_test', vm-test-run-wal2json> server # [ 264.043251] postgres[2453]: null, vm-test-run-wal2json> server # [ 264.043778] postgres[2453]: null, vm-test-run-wal2json> server # [ 264.046389] postgres[2453]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 264.046833] postgres[2453]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 264.048754] postgres[2453]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 264.049214] postgres[2453]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 264.049688] postgres[2453]: 'format-version', '2', vm-test-run-wal2json> server # [ 264.049959] postgres[2453]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 264.050502] postgres[2453]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 264.051162] postgres[2453]: ) x; vm-test-run-wal2json> server # [ 264.053270] postgres[2453]: [2453] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 264.054313] postgres[2453]: [2453] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 264.055075] postgres[2453]: [2453] STATEMENT: select vm-test-run-wal2json> server # [ 264.055670] postgres[2453]: data vm-test-run-wal2json> server # [ 264.056007] postgres[2453]: from vm-test-run-wal2json> server # [ 264.057587] postgres[2453]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 264.058407] postgres[2453]: 'reg_test', vm-test-run-wal2json> server # [ 264.059047] postgres[2453]: null, vm-test-run-wal2json> server # [ 264.059947] postgres[2453]: null, vm-test-run-wal2json> server # [ 264.061168] postgres[2453]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 264.062156] postgres[2453]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 264.063143] postgres[2453]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 264.065141] postgres[2453]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 264.065665] postgres[2453]: 'format-version', '2', vm-test-run-wal2json> server # [ 264.066464] postgres[2453]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 264.066988] postgres[2453]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 264.067290] postgres[2453]: ) x; vm-test-run-wal2json> server # [ 264.323582] sudo[2446]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/4nyxwj2pz6lhivv31jwnf4yz5172pjix-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" , in 1.53 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 666 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with orioledb 17 after installing the last version, in 1.53 seconds) vm-test-run-wal2json> (finished: run the VM test script, in 265.51 seconds) vm-test-run-wal2json> test script finished in 265.87s vm-test-run-wal2json> cleanup vm-test-run-wal2json> kill machine (pid 9) vm-test-run-wal2json> qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/y88crn50yx35fiiwcjx6xqwi6ahk7mlq-python3-3.13.11/bin/python3.13) vm-test-run-wal2json> vde_switch: EOF data port: Interrupted system call vm-test-run-wal2json> kill vlan (pid 7) vm-test-run-wal2json> (finished: cleanup, in 0.01 seconds) vm-test-run-wal2json> vde_switch: Caught signal 15, cleaning up and exiting