these 7 derivations will be built: /nix/store/ihaxic7h1bkjhrdh0d74q8x4i0fz1kd6-packer-1.15.3.drv /nix/store/qrzrsni2ml4zrxs3w6xv1dgpcfzbsj0q-treefmt-nix-packer-fmt-wrapper.drv /nix/store/4nn8a6ab4vxjk8a9z32ncgcw4sa76avw-treefmt.toml.drv /nix/store/g6bnffkl71rbyv0h81my8wh2xkxd1476-treefmt.drv /nix/store/hip052wf6gscpmqgi8r8n25l5x360dw0-versioning-scheme.drv /nix/store/g7jgxbi5ghxc42s4gsbyhz8nxd6rv7gs-pre-commit-config.json.drv /nix/store/6623jswxxz698y47y1pq716nl6q60j6q-pre-commit-run.drv these 125 paths will be fetched (122.8 MiB download, 798.0 MiB unpacked): /nix/store/5g5r97ir4sbiggbpgvwginy3dnqqh3r8-actionlint-1.7.12 /nix/store/nnxi2n0rd7cmsm53x9228bh6s6hsf2c1-ansible-lint-25.8.2 /nix/store/h43c2pmccphrywkws8bpim236wjsj00z-deadnix-1.3.2 /nix/store/77h06g7ssbc40y0zpbhg5wr9216vyj9w-jemalloc-5.3.1 /nix/store/qg6j75w4vwv42dlhzgpwihyq1vysiym5-libssh-0.12.2 /nix/store/bdv194w6f9n8gw71dmys8y8qcdnd5ipb-libssh-0.12.2-dev /nix/store/zbr55rvh2hqw6a7mwjsk43y5g9qmlnrx-llhttp-9.4.3 /nix/store/2s8rlzcpb8knydszsjag8786w35gxwp7-make-binary-wrapper-hook /nix/store/7kcwslr98ahgivprci1qfzgmi6mrgjds-nixfmt-1.5.0 /nix/store/j8kb3zn9kvx1f4ny1jlf21w8gd4zh2k8-nss-cacert-3.131.1 /nix/store/jdi7w33jvlw5mar1mfbrc5avn3zr4mb7-pre-commit-4.5.1 /nix/store/igrx5cw428rdvzbmgdxwbpfdqc33c6f5-pytest-check-hook /nix/store/hnsqrj3pp8nd5kyxr6nprq20922canm4-python3.13-aiodns-4.0.4 /nix/store/wyp83d3g0ibhfnshy59ly29jxkcf4y8p-python3.13-aiohappyeyeballs-2.6.1 /nix/store/54yk55m6qyvdadpwp0sbf1yxkzrz1wk4-python3.13-aiohttp-3.13.5 /nix/store/kj47bigckr9l26sksj34jrd2j7w6bvk9-python3.13-aiosignal-1.4.0 /nix/store/ra4mzyk0as51br73dvapyr6dmzc3iw2c-python3.13-ansible-13.7.0 /nix/store/bcvbni717b3g7w7kl6vfmjjir6sh19zh-python3.13-ansible-compat-26.3.0 /nix/store/q1d2x5ch0sp14iax8b37kl1yasbf9dwh-python3.13-ansible-core-2.21.1 /nix/store/6v5833032jkvxil9bwr4k1l1mlnm66n8-python3.13-ansible-pylibssh-1.4.0 /nix/store/11a2fz89wdc7gs7bd91lmcclycwvdh6p-python3.13-attrs-26.1.0 /nix/store/59ayfkdwzvs4shxk45i83n5qd0llq577-python3.13-backports-zstd-1.3.0 /nix/store/ya71avszwc3c6jxis6vpsk1x3zy027va-python3.13-bcrypt-5.0.0 /nix/store/lyyfdsv9y9f5l3c8n5310w0sx80krrn3-python3.13-black-25.1.0 /nix/store/3vlbjq936qnxip8nj5s41mfaswa29qyi-python3.13-bracex-2.6 /nix/store/23jd7fh8kkgaw046i5615m5r13481kfr-python3.13-brotli-1.2.1 /nix/store/dlnaqhacq4r5f2rk8klx4pv6bax0i11p-python3.13-cbor2-5.8.0 /nix/store/zwbfm6mwakn0sc3myrqa5bifzfdly1qx-python3.13-cerberus-1.3.8 /nix/store/sh19rlsys97dgzga7ak61sqvx4wyif58-python3.13-certifi-2026.01.04 /nix/store/vyv5aj1q3l301wzjdvc0vk0bx1g1yi39-python3.13-cffi-2.0.0 /nix/store/9wy5dxsrycczc399g7dwqj496s8j56yf-python3.13-cfgv-3.5.0 /nix/store/ssmkwk83706z3j5krzr1hpw3s1z6r616-python3.13-charset-normalizer-3.4.7 /nix/store/x9a31yspyqmhqg3mhq4fkjz4a2hc84fr-python3.13-click-8.3.1 /nix/store/cxj0k4sxh0bpa1v4s020al6f905hfivx-python3.13-colorama-0.4.6 /nix/store/w8nikxd7wjyycml2qf6h84xm5b6y83xf-python3.13-configparser-7.2.0 /nix/store/0xd6z95rqgmng25q4j09imv2y1zy0p66-python3.13-cryptography-48.0.0 /nix/store/mhh7a62nkzzvglzz4zgsh2cx5lbpq9xg-python3.13-deepdiff-8.6.2 /nix/store/hakp8gvcis0343w564g33izsawrnx15r-python3.13-distlib-0.4.0 /nix/store/dfj43ja98vyy1fcy2p0wfddzvdjv3i35-python3.13-elementpath-5.1.1 /nix/store/n2igfj1daq63b3sj9y56378xhyz47cg7-python3.13-et-xmlfile-2.0.0 /nix/store/carjmg3kybyl416sdgmwj8ky4jkl7fv2-python3.13-filelock-3.20.3 /nix/store/c88c6sgdrcflc6f1mkdzg2vz4c5l320b-python3.13-flit-core-3.12.0 /nix/store/fhz5pa6x9ixplvpivr75q75jfq8payz2-python3.13-frozenlist-1.8.0 /nix/store/9fscrb4zrkzm8v13jhrrzflf19ci7087-python3.13-geoip2-5.2.0 /nix/store/js2b3cch6vra91hykl16bgxvsvljq10s-python3.13-identify-2.6.19 /nix/store/rjq0hisrnbyfr7x5xwg0kak59iz1013v-python3.13-idna-3.15 /nix/store/s3nqmypdmz9kap4a04kk26n31izv7j79-python3.13-importlib-metadata-9.0.0 /nix/store/cvrgilys461svlqhjcpcg6d0j2c6i45m-python3.13-iniconfig-2.3.0 /nix/store/0sjrpprza9d8sqqy4l3l0w3lp2gcdh8w-python3.13-invoke-2.2.1 /nix/store/2ivx97sq881jvc1b0401xgr6rh743pfy-python3.13-jinja2-3.1.6 /nix/store/g3nqdv23qknykh8ysp8hlds97d25c051-python3.13-jmespath-1.1.0 /nix/store/3lq6fra454mfdlmn03m6a9sr8nag58pi-python3.13-jsonpath-ng-1.7.0 /nix/store/sfnks80kmai8b7msfy2iaxsdnnm9z7qw-python3.13-jsonschema-4.26.0 /nix/store/an67xwqja5w1ghkj833v32c17kb2pcrf-python3.13-jsonschema-specifications-2025.9.1 /nix/store/9p4g3nb70v49zvdvw9jhmkbc5ak5n6ks-python3.13-junit-xml-1.9 /nix/store/05s67vwclxm2li5x2a69apwpvxc5536v-python3.13-jxmlease-1.0.3 /nix/store/bnyls183i9qv41n56ln2adh2gdd2ips2-python3.13-libpass-1.9.3 /nix/store/ry6gdg3i3c8n66skxda7iba0qps9ajyi-python3.13-lxml-6.0.2 /nix/store/khhc9ln73fy99bql106qyydnc4ai3isw-python3.13-markdown-it-py-4.0.0 /nix/store/rynb58rq3pxwi7d4g4rvs71padhi7x0z-python3.13-markupsafe-3.0.3 /nix/store/4rwcr5kj5hf7gjn4g6nvga5jyy52qf2r-python3.13-maxminddb-3.0.0 /nix/store/2dlsw178k1hz36y3kbkl7hnlsjlz8rj2-python3.13-mdurl-0.1.2 /nix/store/hrd1z246gb4r11c78bvyh3ja50bnyp71-python3.13-multidict-6.7.1 /nix/store/k6z8szmk9ji22zafv7k2bmhqcdvp3165-python3.13-mypy-extensions-1.1.0 /nix/store/57fabij633lapk1ir2ki32pk4w19xjmq-python3.13-ncclient-0.7.1 /nix/store/sjkhp8garvg1hnk4cimad4awbk7qpc9g-python3.13-netaddr-1.3.0 /nix/store/6jm3rdyl9wz42s662mb5hhzlgrxk6b66-python3.13-netmiko-4.6.0 /nix/store/6pll4nmjar1p8z0nrfs1xyzkanb1nq4f-python3.13-nodeenv-1.10.0 /nix/store/ilk80rx67kp4qv1xxivnxrqag8grpxs2-python3.13-ntc-templates-8.1.0 /nix/store/658raghz4rxk0c31w60h1p7l1w497pgz-python3.13-openpyxl-3.1.5 /nix/store/b643l4zj8nyaid5n5jh0am7kc5959mig-python3.13-orderly-set-5.5.0 /nix/store/6s971qizv9mw0zypxj51lg14r2lpp514-python3.13-packaging-26.1 /nix/store/xvbxgk7v66lj0f5f7gqfvrshzv3rfag7-python3.13-paramiko-4.0.0 /nix/store/dxy3jb8q5jv2lzcg81nkriznwp27fcb3-python3.13-passlib-1.9.3 /nix/store/k957wd6cv12vzp7cqn39f7llrcmnnlvh-python3.13-pathspec-1.0.4 /nix/store/j33845qcbsrac7lzk1zagrsq33cx8mvz-python3.13-pexpect-4.9.0 /nix/store/jn7zs9f10366nsk34gcgd4azxhw594c3-python3.13-platformdirs-4.5.1 /nix/store/6mnjwjj3k9xx9yi5qbhvwi0q4dk6ymrc-python3.13-pluggy-1.6.0 /nix/store/lq9jzc4wmn9kady2rc1209f1x0y16hi9-python3.13-ply-3.11 /nix/store/a8ajram17zxygbfwxp7i4l99lz5xp510-python3.13-propcache-0.4.1 /nix/store/h5vd1q0s6vcqmykc6ckh28q41lsg37ws-python3.13-psutil-7.2.2 /nix/store/snql41w8g426xcss1nj7zav6w5041gc5-python3.13-ptyprocess-0.7.0 /nix/store/iglnr1x09cd9y062kwlksnzdy65fs0nd-python3.13-pycares-5.0.1 /nix/store/l8jcyjn6kj7iss3hlsi0da9lcjzz4wkz-python3.13-pycparser-3.00 /nix/store/z6vlnr3a5lp4ijg7ra9qfipj8y0az9wp-python3.13-pycrypto-3.23.0 /nix/store/iii24x2nvhbxr09h2i8c38nvjz3qlv8h-python3.13-pycryptodome-3.23.0 /nix/store/2lg2dkjcd9vxszj4yfc88cxmfai1mxgz-python3.13-pyflakes-3.4.0 /nix/store/wxa0pw46n0nsaw2qzhi6hib2x6w59rc5-python3.13-pygments-2.20.0 /nix/store/ii84jiz0ggmcwyyfp5ap6mc7kh3c26dv-python3.13-pynacl-1.6.2 /nix/store/93d7yssi4akqixn75c47ib2bdlpg97cs-python3.13-pyserial-3.5 /nix/store/lclig7rilkx39j3g05gdw8421cjwf3kb-python3.13-pytest-9.0.3 /nix/store/q1pzpfpv172wrp3ahl0svysirbr31664-python3.13-python-dateutil-2.9.0.post0 /nix/store/12215ybhqcn7wshwqil9sby7hrx43nyv-python3.13-referencing-0.37.0 /nix/store/ndyv90xhm5kjya99ry17vna75x7qy2l0-python3.13-remarshal-1.3.0 /nix/store/12mxxxihgl04v9r8fp0db264pji8wpyr-python3.13-requests-2.33.1 /nix/store/94pl8c7ky90mmc88ys30gksb5nhaz5a7-python3.13-resolvelib-1.2.1 /nix/store/cx171mahj8paxnvw5zwidpaf5wakpb37-python3.13-rich-14.3.3 /nix/store/3cj219jb0kd913v9ncjfddmcm5qh9k2v-python3.13-rich-argparse-1.7.2 /nix/store/f48sjjw4nh1yvncyk3kh6fdil575qmiw-python3.13-rpds-py-0.30.0 /nix/store/r4izjjqn02bq0zvpiasz7hz0x4w9xanx-python3.13-ruamel-base-1.0.0 /nix/store/v0fdfyqrbnvmbc9z1hy9hj0lah7m6yq0-python3.13-ruamel-yaml-0.19.1 /nix/store/85v9asx65hy30h7d84l1wy0hdwnhwzzp-python3.13-ruamel-yaml-clib-0.2.15 /nix/store/qxqc8sqib3wkrlx8xh1jkprq7jvm7x1a-python3.13-scp-0.15.0 /nix/store/hhxgh4mfl5hzjzbv623cd7ybq93482i5-python3.13-six-1.17.0 /nix/store/cx9126jsd78dadpiddxqpyfd41rskv9w-python3.13-subprocess-tee-0.4.2 /nix/store/1hp24mp62hh4ncgmw84w845wvrm0g0ra-python3.13-tabulate-0.10.0 /nix/store/chlgnzx8dfq4b8kqkdd6prznwc09j5yl-python3.13-textfsm-2.1.0 /nix/store/5zxi9bkjzns7zhbbgdwvypy9pdiq4spm-python3.13-toml-0.10.2 /nix/store/3j86pcl4zwh1nb08y4f230bq5fy0nawf-python3.13-tomli-2.4.0 /nix/store/zidsq40w0vqfqiksld2y1f69l19bv7sr-python3.13-ttp-0.10.1 /nix/store/fzanjl62wxgzk7f9ayfvcrqv5vqycvcs-python3.13-typing-extensions-4.16.0 /nix/store/27kdlxj6brj0qdsyipg9fg67iknxch5y-python3.13-u-msgpack-python-2.8.0 /nix/store/ynh86fgfkvgsbi31bcg38hznl9virz4a-python3.13-ukkonen-1.1.0 /nix/store/dclbvxfm59b0v7bcbyd7fy3mdyjcz49d-python3.13-urllib3-2.7.0 /nix/store/h6z75nn83r86ciwpc6xqry1l0m4gsdih-python3.13-virtualenv-20.36.1 /nix/store/fw6rakp3b4ysjbx8magjmv6lhi8imgv8-python3.13-wcmatch-10.1 /nix/store/1cbmm9sg2i7dqkbpfq3zapvar6hpyrlz-python3.13-yamllint-1.37.1 /nix/store/83r5p0qb4mdavy0jiplksjzi8wahffys-python3.13-yangson-1.7.6 /nix/store/abl2rcdk1ghb19z3mq1amdgcq7rzxp0q-python3.13-yarl-1.23.0 /nix/store/8613vrvhdzzd3hrwlkw8cxw2gs8k7wmc-python3.13-zipp-3.23.1 /nix/store/ssm3g962slkrvwjjmb861hrr8478nsqh-ruff-0.15.14 /nix/store/gds6snrqlmi2kwgamyqcjr1i4kvdqn15-shellcheck-0.11.0-bin /nix/store/ri2bzbha430mw1gsl3p3v5jk9rwdbnm5-shfmt-3.13.1 /nix/store/z5qjmxbz1lln2881zyj51ihnz46bch6z-treefmt-2.6.0 /nix/store/yvcqrb55jrxwc8wlfxbix4h5hn90338z-yq-go-4.53.2 building '/nix/store/hip052wf6gscpmqgi8r8n25l5x360dw0-versioning-scheme.drv' building '/nix/store/g7jgxbi5ghxc42s4gsbyhz8nxd6rv7gs-pre-commit-config.json.drv' pre-commit-config.json> Sourcing pytest-check-hook pre-commit-config.json> Using pytestCheckPhase building '/nix/store/6623jswxxz698y47y1pq716nl6q60j6q-pre-commit-run.drv' pre-commit-run> Sourcing pytest-check-hook pre-commit-run> Using pytestCheckPhase pre-commit-run> Running phase: unpackPhase pre-commit-run> unpacking source archive /nix/store/rjsgk3r75wlawnp5kx4r4fvzs7na54pi-source pre-commit-run> source root is source pre-commit-run> Running phase: patchPhase pre-commit-run> Running phase: updateAutotoolsGnuConfigScriptsPhase pre-commit-run> Running phase: configurePhase pre-commit-run> no configure script, doing nothing pre-commit-run> Running phase: buildPhase pre-commit-run> Running: $ pre-commit run --all-files pre-commit-run> actionlint...............................................................Passed pre-commit-run> - hook id: actionlint pre-commit-run> - duration: 0.04s pre-commit-run> ansible-lint.............................................................Passed pre-commit-run> - hook id: ansible-lint pre-commit-run> - duration: 22.97s pre-commit-run> pre-commit-run> [WARNING]: Deprecation warnings can be disabled by setting `deprecation_warnings=False` in ansible.cfg. pre-commit-run> [DEPRECATION WARNING]: Importing 'to_bytes' from 'ansible.module_utils._text' is deprecated. This feature will be removed from ansible-core version 2.24. Use ansible.module_utils.common.text.converters instead. pre-commit-run> /nix/store/k957wd6cv12vzp7cqn39f7llrcmnnlvh-python3.13-pathspec-1.0.4/lib/python3.13/site-packages/pathspec/pathspec.py:260: DeprecationWarning: GitWildMatchPattern ('gitwildmatch') is deprecated. Use 'gitignore' for GitIgnoreBasicPattern or GitIgnoreSpecPattern instead. pre-commit-run> patterns = [pattern_factory(line) for line in lines if line] pre-commit-run> /nix/store/k957wd6cv12vzp7cqn39f7llrcmnnlvh-python3.13-pathspec-1.0.4/lib/python3.13/site-packages/pathspec/pattern.py:125: DeprecationWarning: GitWildMatchPattern ('gitwildmatch') is deprecated. Use 'gitignore' for GitIgnoreBasicPattern or GitIgnoreSpecPattern instead. pre-commit-run> regex, include = self.pattern_to_regex(pattern) pre-commit-run> /nix/store/k957wd6cv12vzp7cqn39f7llrcmnnlvh-python3.13-pathspec-1.0.4/lib/python3.13/site-packages/pathspec/pathspec.py:260: DeprecationWarning: GitWildMatchPattern ('gitwildmatch') is deprecated. Use 'gitignore' for GitIgnoreBasicPattern or GitIgnoreSpecPattern instead. pre-commit-run> patterns = [pattern_factory(line) for line in lines if line] pre-commit-run> /nix/store/k957wd6cv12vzp7cqn39f7llrcmnnlvh-python3.13-pathspec-1.0.4/lib/python3.13/site-packages/pathspec/pattern.py:125: DeprecationWarning: GitWildMatchPattern ('gitwildmatch') is deprecated. Use 'gitignore' for GitIgnoreBasicPattern or GitIgnoreSpecPattern instead. pre-commit-run> regex, include = self.pattern_to_regex(pattern) pre-commit-run> WARNING Ignored exception from ArgsRule.matchtasks while processing ansible/tasks/setup-system.yml (tasks): [Errno 36] File name too long: '{"ANSIBLE_MODULE_ARGS": {"name": "ubuntu", "uid": "{{ uids.ubuntu }}", "group": "ubuntu", "groups": ["adm", "audio", "cdrom", "dialout", "dip", "floppy", "lxd", "netdev", "plugdev", "sudo", "video"], "comment": "Ubuntu", "create_home": true, "password_lock": true, "shell": "/bin/bash", "state": "present"}}' pre-commit-run> WARNING Ignored exception from ArgsRule.matchtasks while processing ansible/tasks/stage2-setup-postgres.yml (tasks): [Errno 36] File name too long: '{"ANSIBLE_MODULE_ARGS": {"group": "postgres", "mode": "{{ file_item[\'mode\'] | default(\'0755\', true) }}", "owner": "{{ file_item[\'owner\'] | default(\'postgres\', true) }}", "path": "{{ file_item[\'path\'] }}", "state": "{{ file_item[\'state\'] | default(\'directory\', true) }}"}}' pre-commit-run> WARNING Found incompatible custom yamllint configuration (.yamllint), please either remove the file or edit it to comply with: pre-commit-run> - comments.min-spaces-from-content must be 1. pre-commit-run> pre-commit-run> Read https://ansible.readthedocs.io/projects/lint/rules/yaml/ for more details regarding why we have these requirements. Fix mode will not be available. pre-commit-run> WARNING Listing 367 violation(s) marked as ignored, likely already known pre-commit-run> yaml[empty-lines]: Too many blank lines (1 > 0) (warning) # ignored pre-commit-run> ansible/files/envoy_config/cds.yaml:86 pre-commit-run> pre-commit-run> yaml[empty-lines]: Too many blank lines (1 > 0) (warning) # ignored pre-commit-run> ansible/files/envoy_config/envoy.yaml:23 pre-commit-run> pre-commit-run> yaml[empty-lines]: Too many blank lines (1 > 0) (warning) # ignored pre-commit-run> ansible/files/envoy_config/lds.supabase.yaml:406 pre-commit-run> pre-commit-run> yaml[empty-lines]: Too many blank lines (1 > 0) (warning) # ignored pre-commit-run> ansible/files/envoy_config/lds.yaml:450 pre-commit-run> pre-commit-run> name[play]: All plays should be named. (warning) # ignored pre-commit-run> ansible/playbook.yml:1:3 pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:23:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> name[missing]: All tasks should be named. (warning) # ignored pre-commit-run> ansible/playbook.yml:23 Task/Handler: import_tasks tasks/setup-system.yml pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:26:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:29:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:32:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:36:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:39:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:45:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:48:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:59:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:66:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:73:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:79:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:85:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:91:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/playbook.yml:95 Task/Handler: Adjust APT update intervals pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/playbook.yml:97:7 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/playbook.yml:101 Task/Handler: Transfer init SQL files pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/playbook.yml:103:7 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:108 Task/Handler: Create postgres role pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:112:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> command-instead-of-shell: Use shell only when shell functionality is required. (warning) # ignored pre-commit-run> ansible/playbook.yml:115 Task/Handler: Execute init SQL files pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:115 Task/Handler: Execute init SQL files pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:119:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/playbook.yml:125:7 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:132:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:138:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:144:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (apt). (warning) # ignored pre-commit-run> ansible/playbook.yml:149:7 Use `ansible.builtin.apt` or `ansible.legacy.apt` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:155:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:161:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:165 Task/Handler: Purge snapd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:168:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> command-instead-of-module: systemctl used in place of systemd module (warning) # ignored pre-commit-run> ansible/playbook.yml:171 Task/Handler: Run permission checks pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:171 Task/Handler: Run permission checks pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:174:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> command-instead-of-module: systemctl used in place of systemd module (warning) # ignored pre-commit-run> ansible/playbook.yml:179 Task/Handler: Run fail2ban configuration checks pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:179 Task/Handler: Run fail2ban configuration checks pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:182:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:187 Task/Handler: Run supascan baseline validation pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:189:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:197:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:202:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:206:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:1 Task/Handler: PG logging conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:7:9 Task/Handler: auto_explain, pg_cron, and pg_net confs pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:7 Task/Handler: auto_explain, pg_cron, and pg_net confs pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:74 Task/Handler: Disable cron access pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:75:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:109:9 Task/Handler: import pgsodium_getkey script pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/fix-ipv6-ndisc.yml:2:9 Task/Handler: fix Network - systemd timer and service file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/fix-ipv6-ndisc.yml:15:9 Task/Handler: fix Network - detect script pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/fix-ipv6-ndisc.yml:23:9 Task/Handler: fix Network - reload systemd pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/fix-ipv6-ndisc.yml:27:9 Task/Handler: fix Network - ensure systemd timer is installed but disabled pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:1:9 Task/Handler: adminapi - system group pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:7:9 Task/Handler: adminapi - system user pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:15:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:27:9 Task/Handler: give adminapi user permissions pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:28:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:34:9 Task/Handler: perms for adminapi pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:34 Task/Handler: perms for adminapi pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:35:3 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:38 Task/Handler: Download adminapi archive pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (get_url). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:39:3 Use `ansible.builtin.get_url` or `ansible.legacy.get_url` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:45:9 Task/Handler: adminapi - unpack archive in /opt pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (unarchive). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:46:3 Use `ansible.builtin.unarchive` or `ansible.legacy.unarchive` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:52:9 Task/Handler: adminapi - config dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:52 Task/Handler: adminapi - config dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:53:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:58:9 Task/Handler: adminapi - pg_upgrade scripts dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:58 Task/Handler: adminapi - pg_upgrade scripts dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:59:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:65:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:79:9 Task/Handler: adminapi - create service file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:79 Task/Handler: adminapi - create service file pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:80:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:84:9 Task/Handler: adminapi - create service file for commence backup process pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:84 Task/Handler: adminapi - create service file for commence backup process pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:85:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:89:9 Task/Handler: adminapi - create service file for commence restore process pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:89 Task/Handler: adminapi - create service file for commence restore process pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:90:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> fqcn[action]: Use FQCN for module actions, such `community.general.ufw`. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:95:3 Action `ufw` is not FQCN. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:99:9 Task/Handler: adminapi - reload systemd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:100:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:103:9 Task/Handler: adminapi - grant extra priviliges to user pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:103 Task/Handler: adminapi - grant extra priviliges to user pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:104:3 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-mgr.yml:1 Task/Handler: Download admin-mgr archive pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (get_url). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-mgr.yml:2:3 Use `ansible.builtin.get_url` or `ansible.legacy.get_url` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-mgr.yml:12:9 Task/Handler: admin-mgr - unpack archive in /usr/bin/ pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (unarchive). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-mgr.yml:13:3 Use `ansible.builtin.unarchive` or `ansible.legacy.unarchive` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:1 Task/Handler: Collect Postgres binaries - create collection directory pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:2:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:6 Task/Handler: Collect Postgres binaries - collect binaries and libraries pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:7:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:15 Task/Handler: Collect Postgres libraries - collect libraries which are in /usr/lib/postgresql/lib/ pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:16:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:21 Task/Handler: Collect Postgres libraries - collect libraries which are in /var/lib/postgresql/extension/ pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:22:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:27 Task/Handler: Collect Postgres libraries - collect latest libpq pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:28:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:33 Task/Handler: Collect Postgres binaries - collect shared files pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:34:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:39 Task/Handler: Collect Postgres binaries - create tarfile pre-commit-run> pre-commit-run> fqcn[action]: Use FQCN for module actions, such `community.general.archive`. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:40:3 Action `archive` is not FQCN. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (fetch). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:46:3 Use `ansible.builtin.fetch` or `ansible.legacy.fetch` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-aws-cli.yml:20 Task/Handler: AWS CLI - get pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-aws-cli.yml:37 Task/Handler: AWS CLI - install pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-aws-cli.yml:42:9 Task/Handler: install utilities to manage Amazon EC2 instance storage pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-aws-cli.yml:48 Task/Handler: AWS CLI - configure ipv6 support for s3 pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:4:7 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:9:13 Task/Handler: salt gpg key pre-commit-run> pre-commit-run> jinja[spacing]: Jinja2 spacing could be improved: {{salt_artifacts['url']}} -> {{ salt_artifacts['url'] }} (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:11:14 Jinja2 template rewrite recommendation: `{{ salt_artifacts['url'] }}`. pre-commit-run> pre-commit-run> jinja[spacing]: Jinja2 spacing could be improved: {{salt_artifacts['checksum']}} -> {{ salt_artifacts['checksum'] }} (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:12:19 Jinja2 template rewrite recommendation: `{{ salt_artifacts['checksum'] }}`. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:20:13 Task/Handler: salt apt repo pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (apt). (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:27:3 Use `ansible.builtin.apt` or `ansible.legacy.apt` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/optimizations.yml:1:9 Task/Handler: ensure services are stopped and disabled for first boot nix build pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/optimizations.yml:3:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/optimizations.yml:15:9 Task/Handler: disable man-db pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/optimizations.yml:18:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:1:9 Task/Handler: pg_egress_collect - install tcpdump and perl async lib pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (apt). (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:2:3 Use `ansible.builtin.apt` or `ansible.legacy.apt` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:7:9 Task/Handler: pg_egress_collect - create service file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:7 Task/Handler: pg_egress_collect - create service file pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:8:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:12:9 Task/Handler: pg_egress_collect - reload systemd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:13:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> yaml[empty-lines]: Too many blank lines (1 > 0) (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:15 pre-commit-run> pre-commit-run> fqcn[action]: Use FQCN for module actions, such `community.general.ufw`. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:2:3 Action `ufw` is not FQCN. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:6:9 Task/Handler: create directories - systemd unit pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:7:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:14:9 Task/Handler: create directories - service files pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:15:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:23:9 Task/Handler: download postgres exporter pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:23 Task/Handler: download postgres exporter pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (get_url). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:24:3 Use `ansible.builtin.get_url` or `ansible.legacy.get_url` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:34:9 Task/Handler: expand postgres exporter pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (unarchive). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:35:3 Use `ansible.builtin.unarchive` or `ansible.legacy.unarchive` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:42:9 Task/Handler: exporter create a service pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:42 Task/Handler: exporter create a service pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:43:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:47:9 Task/Handler: exporter ensure service is present pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:48:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgresql-prestart.yml:1:9 Task/Handler: postgres_prestart - create service file pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgresql-prestart.yml:2:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:1:9 Task/Handler: install ansible pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:1 Task/Handler: install ansible pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:2:3 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:10:9 Task/Handler: ansible pull systemd units pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:10 Task/Handler: ansible pull systemd units pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:11:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:18:9 Task/Handler: create facts dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:18 Task/Handler: create facts dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:19:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:23:9 Task/Handler: ansible facts pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:23 Task/Handler: ansible facts pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:24:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:28:9 Task/Handler: reload systemd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:29:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:1:9 Task/Handler: nftables overrides pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:1 Task/Handler: nftables overrides pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:2:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:7:9 Task/Handler: nftables empty config pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:7 Task/Handler: nftables empty config pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:8:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:13:9 Task/Handler: include managed config pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:13 Task/Handler: include managed config pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:14:3 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:21:9 Task/Handler: install per-user egress filters pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:22:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:29:9 Task/Handler: include per-user egress filters pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (blockinfile). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:30:3 Use `ansible.builtin.blockinfile` or `ansible.legacy.blockinfile` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:38:9 Task/Handler: check the full nftables config parses pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (command). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:39:3 Use `ansible.builtin.command` or `ansible.legacy.command` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:42:9 Task/Handler: ufw overrides dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:42 Task/Handler: ufw overrides dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:43:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:48 Task/Handler: Custom systemd overrides pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:49:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:53:9 Task/Handler: reload systemd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:54:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:1:9 Task/Handler: supabase-admin-agent - system group pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:7:9 Task/Handler: supabase-admin-agent - system user pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:17:9 Task/Handler: supabase-admin-agent - config dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:17 Task/Handler: supabase-admin-agent - config dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:18:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:23:9 Task/Handler: supabase-admin-agent - gpg dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:23 Task/Handler: supabase-admin-agent - gpg dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:24:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:30:9 Task/Handler: give supabase-admin-agent user permissions pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:31:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:36:9 Task/Handler: supabase-admin-agent - pgbackrest helper scripts dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:37:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:44:9 Task/Handler: supabase-admin-agent - pgdata-chown script pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:45:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:53:9 Task/Handler: supabase-admin-agent - pgdata-signal script pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:54:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:63 Task/Handler: Download supabase-admin-agent archive pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (get_url). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:64:3 Use `ansible.builtin.get_url` or `ansible.legacy.get_url` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:74:9 Task/Handler: supabase-admin-agent - unpack archive in /opt pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (unarchive). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:75:3 Use `ansible.builtin.unarchive` or `ansible.legacy.unarchive` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:83:9 Task/Handler: supabase-admin-agent - create symlink pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:92:9 Task/Handler: supabase-admin-agent - create salt systemd timer file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:92 Task/Handler: supabase-admin-agent - create salt systemd timer file pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:93:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:97:9 Task/Handler: supabase-admin-agent - create salt service file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:97 Task/Handler: supabase-admin-agent - create salt service file pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:98:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:102:9 Task/Handler: supabase-admin-agent - reload systemd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:103:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:107:9 Task/Handler: supabase-admin-agent - DISABLE service pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:108:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:2:9 Task/Handler: do stage1 tasks pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:5:13 Task/Handler: extend the default bantime to an hour pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:12:13 Task/Handler: configure journald pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:12 Task/Handler: configure journald pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:17:13 Task/Handler: configure fail2ban to use nftables pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:17 Task/Handler: configure fail2ban to use nftables pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:23:13 Task/Handler: import jail.d/postgresql.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:23 Task/Handler: import jail.d/postgresql.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:29:13 Task/Handler: import filter.d/postgresql.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:29 Task/Handler: import filter.d/postgresql.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:35:13 Task/Handler: create overrides dir pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:43:13 Task/Handler: custom systemd overrides pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:43 Task/Handler: custom systemd overrides pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:48:13 Task/Handler: add in supabase specific ignore filters pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:65:13 Task/Handler: fail2ban - disable service pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:20:9 Task/Handler: gotrue - download commit archive pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:20 Task/Handler: gotrue - download commit archive pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:30:9 Task/Handler: gotrue - create /opt/gotrue and /etc/auth.d pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:42:9 Task/Handler: gotrue - unpack archive in /opt/gotrue pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:56:9 Task/Handler: gotrue - create service file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:56 Task/Handler: gotrue - create service file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:61:9 Task/Handler: gotrue - create optimizations file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:61 Task/Handler: gotrue - create optimizations file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:66:9 Task/Handler: gotrue - reload systemd pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:23 Task/Handler: Kong - download deb package pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (get_url). (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:24:3 Use `ansible.builtin.get_url` or `ansible.legacy.get_url` instead. pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:37 Task/Handler: Kong - ensure it is NOT autoremoved pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:41 Task/Handler: Kong - configuration pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:61 Task/Handler: Kong - create env file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:66 Task/Handler: Kong - create service file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:3:9 Task/Handler: phc2sys - install pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:8:9 Task/Handler: phc2sys - create service file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:8 Task/Handler: phc2sys - create service file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:13:9 Task/Handler: phc2sys - enable service pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:20:9 Task/Handler: phc2sys - remove systemd-timesyncd pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:29:9 Task/Handler: ptp_kvm.ko - enable pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:29 Task/Handler: ptp_kvm.ko - enable pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-migrations.yml:1:9 Task/Handler: run stage2 tasks pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-migrations.yml:4 Task/Handler: Run migrate.sh script pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-migrations.yml:13 Task/Handler: Create /root/MIGRATION-AMI file pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:18 Task/Handler: Install PgBouncer from nix binary cache pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:47:9 Task/Handler: create PgBouncer placeholder config files pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:76:9 Task/Handler: import /etc/tmpfiles.d/pgbouncer.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:76 Task/Handler: import /etc/tmpfiles.d/pgbouncer.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:99:9 Task/Handler: import jail.d/pgbouncer.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:99 Task/Handler: import jail.d/pgbouncer.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:105:9 Task/Handler: import filter.d/pgbouncer.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:105 Task/Handler: import filter.d/pgbouncer.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:112 Task/Handler: PgBouncer - import pgbouncer.service pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:1:9 Task/Handler: execute stage1 tasks pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:6:13 Task/Handler: create ssl-cert group pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:12:13 Task/Handler: create postgres group pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:18:13 Task/Handler: create postgres user pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:71:13 Task/Handler: create placeholder config files pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:84:13 Task/Handler: import postgresql.conf, pg_hba.conf, and pg_ident.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:84 Task/Handler: import postgresql.conf, pg_hba.conf, and pg_ident.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:134 Task/Handler: Make sure .bashrc exists pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:141:9 Task/Handler: execute stage2 tasks pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:144:13 Task/Handler: install locales pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:149:13 Task/Handler: configure locales pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:149 Task/Handler: configure locales pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:161:13 Task/Handler: locale-gen pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:161 Task/Handler: locale-gen pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:165:13 Task/Handler: update-locale pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:165 Task/Handler: update-locale pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:173:13 Task/Handler: stage2 postgres tasks pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:188 Task/Handler: Initialize the database stage2 (PG15) pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:203 Task/Handler: Initialize the database stage2 (PG17+) pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:218:9 Task/Handler: copy PG apparmor profile pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:226:9 Task/Handler: ensure apparmor-utils are installed pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:230:9 Task/Handler: parse apparmor sbpostgres profile pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:230 Task/Handler: parse apparmor sbpostgres profile pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:234:9 Task/Handler: reload apparmor with sbpostgres profile pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:234 Task/Handler: reload apparmor with sbpostgres profile pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:238:9 Task/Handler: copy PG and optimizations systemd units pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:238 Task/Handler: copy PG and optimizations systemd units pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:249:9 Task/Handler: initialize pg required state pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:249 Task/Handler: initialize pg required state pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:259 Task/Handler: Restart Postgres Database without Systemd pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:314 Task/Handler: Add lang and locale items to .bashrc pre-commit-run> pre-commit-run> jinja[spacing]: Jinja2 spacing could be improved: {{postgrest_artifacts['signingkey']['url']}} -> {{ postgrest_artifacts['signingkey']['url'] }} (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:16:10 Jinja2 template rewrite recommendation: `{{ postgrest_artifacts['signingkey']['url'] }}`. pre-commit-run> pre-commit-run> jinja[spacing]: Jinja2 spacing could be improved: {{postgrest_artifacts['signingkey']['checksum']}} -> {{ postgrest_artifacts['signingkey']['checksum'] }} (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:17:15 Jinja2 template rewrite recommendation: `{{ postgrest_artifacts['signingkey']['checksum'] }}`. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:57:9 Task/Handler: postgis - ensure dependencies do not get autoremoved pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:57 Task/Handler: postgis - ensure dependencies do not get autoremoved pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:61:9 Task/Handler: postgis - allow libnuma-dev to be autoremoved pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:61 Task/Handler: postgis - allow libnuma-dev to be autoremoved pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:65 Task/Handler: PostgREST - download ubuntu binary archive (arm) pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:84:9 Task/Handler: create directories pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:92:9 Task/Handler: empty files pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:92 Task/Handler: empty files pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:104:9 Task/Handler: create conf merging script pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:117 Task/Handler: PostgREST - create service files pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:5:9 Task/Handler: download Vector package pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:5 Task/Handler: download Vector package pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:23:9 Task/Handler: add vector system group pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:29:9 Task/Handler: add vector system user pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:40:9 Task/Handler: install Vector for logging pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (apt). (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:41:3 Use `ansible.builtin.apt` or `ansible.legacy.apt` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:45:9 Task/Handler: create service files for Vector pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:45 Task/Handler: create service files for Vector pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:50:9 Task/Handler: configure tmpfiles for postgres - overwrites upstream package pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:50 Task/Handler: configure tmpfiles for postgres - overwrites upstream package pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:55:9 Task/Handler: fix permissions for vector config to be managed pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:64:9 Task/Handler: vector - reload systemd pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:68 Task/Handler: Create checkpoints dir pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:125 Task/Handler: Envoy - use lds.supabase.yaml for /etc/envoy/lds.yaml pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:4:13 Task/Handler: supautils - add supautils to session_preload_libraries pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:11:13 Task/Handler: supautils - write custom supautils.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:19:13 Task/Handler: supautils - copy extension custom scripts pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:19 Task/Handler: supautils - copy extension custom scripts pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:25:13 Task/Handler: supautils - chown extension custom scripts pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:34:13 Task/Handler: supautils - include /etc/postgresql-custom/supautils.conf in postgresql.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:75:13 Task/Handler: restart ufw pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:80 Task/Handler: Create Sysstat log directory pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:85 Task/Handler: Configure sysstat pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:95 Task/Handler: Adjust APT update intervals pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:112 Task/Handler: Disable kexec handover pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:123 Task/Handler: Enable zswap pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:166 Task/Handler: System - Create services.slice pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:175 Task/Handler: Configure journald and logind pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:185:13 Task/Handler: reload systemd-journald pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:195:13 Task/Handler: enable timestamps for shell history pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:204:13 Task/Handler: configure systemd's pager pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:213:9 Task/Handler: set hosts file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:224:9 Task/Handler: configure NTP client pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:227:13 Task/Handler: ensure conf directory exists pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:233:13 Task/Handler: configure NTP server pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-tmux.yml:1:9 Task/Handler: tmux - Install tmux pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-tmux.yml:7:9 Task/Handler: tmux - Configure tmux alias pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-tmux.yml:19:9 Task/Handler: tmux - Configure tmux pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-tmux.yml:28:9 Task/Handler: tmux - Auto-logout from stale tmux pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-wal-g.yml:37 Task/Handler: Install wal-g 2 from nix binary cache pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-wal-g.yml:45 Task/Handler: Install wal-g 3 from nix binary cache pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:65 Task/Handler: Install postgres env from nix binary cache pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:72 Task/Handler: Install and activate site env from nix binary cache pre-commit-run> pre-commit-run> yaml[commas]: Too many spaces before comma (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:87 pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:97:13 Task/Handler: import pgsodium_getkey script pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:119:13 Task/Handler: setup gatekeeper pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:124 Task/Handler: Create symbolic link for linux-pam to find pam_jit_pg.so pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:126:15 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:129 Task/Handler: Get gatekeeper version pre-commit-run> pre-commit-run> risky-shell-pipe: Shells that use pipes should set the pipefail option. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:129 Task/Handler: Get gatekeeper version pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:136 Task/Handler: Write version file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:208:13 Task/Handler: create destination directory pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:215:13 Task/Handler: pgsodium - set pgsodium.getkey_script pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/test-image.yml:4 Task/Handler: Make a backup of the /etc/postgresql/postgresql.conf file pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/test-image.yml:41 Task/Handler: Restart Postgres Database in stage 2 to load all extensions pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/test-image.yml:58 Task/Handler: Re-enable PG Sodium references in /etc/postgresql/postgresql.conf pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/test-image.yml:82 Task/Handler: Restart Postgres Database in stage 2 to load all extensions pre-commit-run> pre-commit-run> pre-commit-run> Passed: 0 failure(s), 367 warning(s) on 169 files. Last profile that met the validation criteria was 'production'. pre-commit-run> pre-commit-run> shellcheck...............................................................Passed pre-commit-run> treefmt..................................................................Passed pre-commit-run> - hook id: treefmt pre-commit-run> - duration: 0.66s pre-commit-run> pre-commit-run> traversed 936 files pre-commit-run> emitted 233 files for processing pre-commit-run> formatted 233 files (0 changed) in 650ms pre-commit-run> pre-commit-run> versioning-scheme........................................................Passed pre-commit-run> - hook id: versioning-scheme pre-commit-run> - duration: 0.01s