these 7 derivations will be built: /nix/store/pzw54rm3kjyiq6mipkgkycm1f3v3d2rf-packer-1.15.3.drv /nix/store/4mildlfld4w07p4am7r76vhvrbsjw90s-treefmt-nix-packer-fmt-wrapper.drv /nix/store/dkkb5iwa7f6d7vil43b2v4q79ma55p6f-treefmt.toml.drv /nix/store/2iljnk91nw2w3n2clib0w5pn3yvr3ngk-treefmt.drv /nix/store/lfvq21zpwp7313npbp4dhb4nhkiphrch-versioning-scheme.drv /nix/store/dmxiszngf10rsyjjgzqzbkln0lz3a626-pre-commit-config.json.drv /nix/store/lmsf7jzcjhwcgl13nd5gzx5y9pql87ps-pre-commit-run.drv these 142 paths will be fetched (207.1 MiB download, 1.1 GiB unpacked): /nix/store/2vqssy09p1n5xnqmfd465kdwnl6m4f9h-actionlint-1.7.12 /nix/store/8zms8ykmj4r1p6kqg4fsl5id8k5wmb0y-ansible-lint-25.8.2 /nix/store/srq33wcrjlw4vbk1cgdy3vlyx0srip43-bash-interactive-5.3p9 /nix/store/5fwxbdrm3d3xwib8d564clbx3rp9prfc-brotli-1.2.1-lib /nix/store/akdr9l9v5dl8y2z6alby18vbgsx3qs9d-curl-8.23.0 /nix/store/f728i91dc887mfk09j2iqdmr3jicw7ww-deadnix-1.3.2 /nix/store/q43zz9sifpzgy9n86myjx7vnxls4mzpv-gettext-1.0 /nix/store/1j15qsg0ra2jbr1r6jha55741avfkrl3-git-minimal-2.54.0 /nix/store/ghmic9kfh89k76006sgw10yd9qgqn9cz-go-1.26.10 /nix/store/qcq3ly1gk5l8j9a6kifkc2kn3jmcsq7y-iana-etc-20251215 /nix/store/gv1cx8wf25xrnni7xwns8pyx7w97swry-install-shell-files /nix/store/fq8wncafp6gl7vzikf2b3564i5c90h1h-jemalloc-5.3.1 /nix/store/yijfwv10dx7nw9pw29pg44yjg0r914hf-jq-1.8.2-dev /nix/store/7xdi91kp0rvyx8qh7fi2vb4jixmy2lvs-libpsl-0.21.5 /nix/store/6f7dfzcryin2s73dak04l1c5hwdgpg9j-libsodium-1.0.22-unstable-2026-04-09 /nix/store/85v93kb3pn66g9h7s8zbzzv47xbq68pr-libssh-0.12.2 /nix/store/byaqrxw6mlhw1c2lnl0k2m6bc9rzn3ig-libssh-0.12.2-dev /nix/store/0k9p9rf5yngfs9nnvfpygw7gqr9k7cb6-libssh2-1.11.1 /nix/store/krdlhnagykrx2rrv9wp6701sikib6jih-llhttp-9.4.3 /nix/store/jnbns2f5lz3ikr7cfck50k74hy3pflkx-make-binary-wrapper-hook /nix/store/lms6rnszmwnajiswv8y8hhbyn8gd2prs-nghttp2-1.69.0-lib /nix/store/93f7cn1fq3slf03gv55a4zlw26w4c1n6-nghttp3-1.15.0 /nix/store/y12bxv39ahrpxpf10l1zv7ww8mhdj1hi-ngtcp2-1.22.1 /nix/store/3g2kd9x5rw0f25109kwpj6a1br8x2vyw-nixfmt-1.5.0 /nix/store/aq0nk440vp4cmllm2k49l0ghlbpxcjr2-nss-cacert-3.131.1 /nix/store/5xmagnzipnaslxbyvanz56bswyj3aqd2-pre-commit-4.5.1 /nix/store/b1raig9bbzbmackkpwfxgjban366isxd-publicsuffix-list-0-unstable-2026-05-13 /nix/store/x8jv9dmmc88icbriy3hdp48sccpvdcj6-pytest-check-hook /nix/store/37gb75simn1a144mgz1i4y275cva1ga0-python3.13-aiodns-4.0.4 /nix/store/czdfxzq5va1a8in9376953axbk3zxcja-python3.13-aiohappyeyeballs-2.6.1 /nix/store/qn8ia6610n0mz9gsaw2mlzd080ab7kf3-python3.13-aiohttp-3.13.5 /nix/store/7lifyhirryr5m2rv689gzmmywx7ahhjd-python3.13-aiosignal-1.4.0 /nix/store/v3v0ig20kknqv6ac03jlivy4inhrh3rl-python3.13-ansible-13.7.0 /nix/store/86cnhydby9b8lavsi54i4q3bf8l6bigk-python3.13-ansible-compat-26.3.0 /nix/store/p138nqb8lymkplk9jkqap5c0fmjhna2r-python3.13-ansible-core-2.21.1 /nix/store/q4djjhp4y0fryg7vqm7cia2qb08w12s8-python3.13-ansible-pylibssh-1.4.0 /nix/store/gwxsd38ci32pph3syg96bah86g23bp9m-python3.13-attrs-26.1.0 /nix/store/h0l4agbr1jfvywnmbvibksigrn5saf48-python3.13-backports-zstd-1.3.0 /nix/store/k8rvvqxi20yybwjv9wqysqw49vhizkhm-python3.13-bcrypt-5.0.0 /nix/store/zcwa4p15s8qyxqqaa6a0blfy5drxwgrv-python3.13-black-25.1.0 /nix/store/xkgbwl6n9sas8vnf9yk4vfskz0rxp21c-python3.13-bracex-2.6 /nix/store/qv9paqgbnslv8dzghrsghqbpgvii1ai1-python3.13-brotli-1.2.1 /nix/store/iwsy7zq9xc9wlzcajgvszsh7jmhqzki4-python3.13-cbor2-5.8.0 /nix/store/z24wgp8pv188zgca2zk7chiwq0924bsl-python3.13-cerberus-1.3.8 /nix/store/pxj18pf2galknn4z7hk1inc7r8wg4qs3-python3.13-certifi-2026.01.04 /nix/store/yxvys9m7zrf5c4r9j98mzl2f8yzmxlnk-python3.13-cffi-2.0.0 /nix/store/9dxqbwjz6rh2zhz9fmp7qjfnwwdnbpig-python3.13-cfgv-3.5.0 /nix/store/ab6dwbhz0bbyhd3b6cidn36svgfrryb0-python3.13-charset-normalizer-3.4.7 /nix/store/jfmsf54v9f9w29mkwk11y8mixdxg19vw-python3.13-click-8.3.1 /nix/store/pbnkyfjq93v08wmyamdkv4r89y4r5k90-python3.13-colorama-0.4.6 /nix/store/wqpsf8s9qvffi7hcf19xvq3bb8zs5vx2-python3.13-configparser-7.2.0 /nix/store/r36fbzsjaqp8fkr965mgw4f63p4h3inl-python3.13-cryptography-48.0.0 /nix/store/rdkqq2pshxnp30f2nczy11jc62nwk7ra-python3.13-deepdiff-8.6.2 /nix/store/cw5ynl72238g9yh2jjxgyzlqy8rms2ar-python3.13-distlib-0.4.0 /nix/store/mzp8x4cvsfjaaik885zmzki9fz2pw98d-python3.13-elementpath-5.1.1 /nix/store/p91gdyd9za4g8fkm3rbqcaq9vxji5gl5-python3.13-et-xmlfile-2.0.0 /nix/store/zk9z6m00dsh1r6pic54fslk9r9my9d2v-python3.13-filelock-3.20.3 /nix/store/97f4srqmvdd33bqb3ycrlsh2vm1s0j0s-python3.13-flit-core-3.12.0 /nix/store/9fql1md0zsijjhnb5hfc0phhxmfc3n86-python3.13-frozenlist-1.8.0 /nix/store/zxlxlfwhimk84rs5nhc5lwxh8ajcnyqg-python3.13-geoip2-5.2.0 /nix/store/g7lxkbj2hr576wzj3ynv6j8hal6f5g81-python3.13-identify-2.6.19 /nix/store/rcsf7r3npzvzxwmig095xk2wprq4y5pi-python3.13-idna-3.15 /nix/store/6cpiypahw81wsqmyrny4ffd46aw7s23b-python3.13-importlib-metadata-9.0.0 /nix/store/7sl6ylg53ydss13jmbglr1d0q7bxgarl-python3.13-iniconfig-2.3.0 /nix/store/vzaxx5x232p8psdjvj3avl12wxx45d4m-python3.13-invoke-2.2.1 /nix/store/ag8b1l5cbnff166r2af8xc56i0q168vc-python3.13-jinja2-3.1.6 /nix/store/78ljnanilk106h33v34zhp6a9pfr20vd-python3.13-jmespath-1.1.0 /nix/store/k0nlyyvm95iz3cinyx3vm18qj3whdfaa-python3.13-jsonpath-ng-1.7.0 /nix/store/0m0084bb4axdqvh1lpray74z8lb4a2q7-python3.13-jsonschema-4.26.0 /nix/store/fzg0fr2hcw8hwbnd4s9y0d9jcgpapv12-python3.13-jsonschema-specifications-2025.9.1 /nix/store/90gss2i8xnnpl86zd6jm3dyxy1rp0a0n-python3.13-junit-xml-1.9 /nix/store/hlxjydgpj9ij4k5bp5zjw81pyvgv06r4-python3.13-jxmlease-1.0.3 /nix/store/9agn8zj11d3l2rf7zf1lrymwsxwcgv4m-python3.13-libpass-1.9.3 /nix/store/dcz6lg73c6x90h80g343pplxbafhyj96-python3.13-lxml-6.0.2 /nix/store/q4d87dzmaxlngzk41amvi6i8f08qa9m2-python3.13-markdown-it-py-4.0.0 /nix/store/08bfz14bkd4bp4jc4izk8mwv04xw997f-python3.13-markupsafe-3.0.3 /nix/store/c49qzxdag94q11bp2vqk4inzawl0vgmz-python3.13-maxminddb-3.0.0 /nix/store/ya6nj5d0lmqjab9f8l7ka5yv76zfqdlq-python3.13-mdurl-0.1.2 /nix/store/8yygjnmf21l50yr46ihrxrsr5q397z97-python3.13-multidict-6.7.1 /nix/store/8f7zqxah43h80dqrscgc8z49il5ll7y9-python3.13-mypy-extensions-1.1.0 /nix/store/vlx9ih97i55j5pcd0da92z72bbqma0b1-python3.13-ncclient-0.7.1 /nix/store/pz365nd5jwdqzsmjwxbk8h3cz86kxl9i-python3.13-netaddr-1.3.0 /nix/store/lg595y637s10mfpwabln1d2366jrl5w1-python3.13-netmiko-4.6.0 /nix/store/q8hbs7qy83gw3p6y7amfaj1ir2kpawky-python3.13-nodeenv-1.10.0 /nix/store/2xylsy6dwbf1ivr7s1ckbl8f1xkhh8d5-python3.13-ntc-templates-8.1.0 /nix/store/8drdilh6dykhqy0xj1gkmag8afkqlj6p-python3.13-openpyxl-3.1.5 /nix/store/ns0n8kfb2ym4mqqj967ch9vilyrbp260-python3.13-orderly-set-5.5.0 /nix/store/q81cwsr2z3r0qwxvfhs3psayz7sf09km-python3.13-packaging-26.1 /nix/store/vzc9cixdlbfi5nz9677mfc122nz34rzh-python3.13-paramiko-4.0.0 /nix/store/hm2v12g4j4fldwg58zqn3q8cfgqvrmw3-python3.13-passlib-1.9.3 /nix/store/q8nb6njf3b23ck6c7zhj21him72xx2j1-python3.13-pathspec-1.0.4 /nix/store/0rf9q3ia1d9nxycx780lin39nz609clb-python3.13-pexpect-4.9.0 /nix/store/hy1lzax1kyxfnch20h10f4bskj0bz6gb-python3.13-platformdirs-4.5.1 /nix/store/0wjab9dzdcz1ijq3f9nkh8agmlnazqqm-python3.13-pluggy-1.6.0 /nix/store/p9a6c8g2p3phbzdsjflfl47qpq6wgjv0-python3.13-ply-3.11 /nix/store/j07i5vvgbz46xp7cg4aa0srnpqz4hpj2-python3.13-propcache-0.4.1 /nix/store/2dp9iy0bc2yfwjvja33cvqnpz4qfyl80-python3.13-psutil-7.2.2 /nix/store/hnjw0k2sixx7klscjhqvdc9a0jnlb6qq-python3.13-ptyprocess-0.7.0 /nix/store/y6bdykmz7mn8n450jljs5iw0ixyj3zis-python3.13-pycares-5.0.1 /nix/store/flprgpzxad9yzs0yqz4dwmlfxp3inpzy-python3.13-pycparser-3.00 /nix/store/n4403ln8w812wsck46583plw19fiicyl-python3.13-pycrypto-3.23.0 /nix/store/w4xrwxcx3lkz1qgj26qs3db363b0qppi-python3.13-pycryptodome-3.23.0 /nix/store/ak2pm3b653x4k5kxvvwgzwiqy9qanysc-python3.13-pyflakes-3.4.0 /nix/store/c0qzxmhgp8pfkxh80sbpcnfh7f81x67i-python3.13-pygments-2.20.0 /nix/store/x3a10y7r830xvvj9b5kpgbg4338vqp30-python3.13-pynacl-1.6.2 /nix/store/n1vxs8r00c611lr17k7wdnqawjfaqkyp-python3.13-pyserial-3.5 /nix/store/wak3v9n9wibd1xls9xy1z025440finra-python3.13-pytest-9.0.3 /nix/store/hl4axbpr95smzz9nvf0020ayvyd7vmxl-python3.13-python-dateutil-2.9.0.post0 /nix/store/sb5gzzhg23n9h4wly82ccp820kii4q5s-python3.13-referencing-0.37.0 /nix/store/1g4c442018m001i2hbgd2h6sx4bvv4dh-python3.13-remarshal-1.3.0 /nix/store/haijr5f9q53gxy5pqd82ys2163i9lcyd-python3.13-requests-2.33.1 /nix/store/yl75r6kfkzah83g08ckqc6gqgf78c9s8-python3.13-resolvelib-1.2.1 /nix/store/7b5ypk3am9vqfw549g0iwf04b9r5rjri-python3.13-rich-14.3.3 /nix/store/9vpw7ybrvah6zlpqc0dic0nygsyrzw9y-python3.13-rich-argparse-1.7.2 /nix/store/6n2p3riwfbjfhicykijcqnh1hxcbik93-python3.13-rpds-py-0.30.0 /nix/store/qfp3yisqlqpaja8k4x00n6s2zh82ns6h-python3.13-ruamel-base-1.0.0 /nix/store/2gnzynxdzmp0jg782j0ipyzvwz893rzf-python3.13-ruamel-yaml-0.19.1 /nix/store/xd7j30d89353lq2jw1vn0ybjl3wpkz6w-python3.13-ruamel-yaml-clib-0.2.15 /nix/store/v06l9mr7vv79dc6xrj3yk75dad99dbzd-python3.13-scp-0.15.0 /nix/store/9xngnxli84madnnb4cgiqc4p5cpq16a8-python3.13-six-1.17.0 /nix/store/9lpgn05wpx58cjkn48xgqbj6r21gysxp-python3.13-subprocess-tee-0.4.2 /nix/store/p588qg9fx4ldjx9rpaww4x61cjqd6k7n-python3.13-tabulate-0.10.0 /nix/store/4v8jfv5ijkbkwldybycdqwgbqy30j52n-python3.13-textfsm-2.1.0 /nix/store/7nhiwvd53xlxd142d48fhc5nwb6jk9mw-python3.13-toml-0.10.2 /nix/store/bn0hiy2p4m4c2dywx7053bxp3jfl1v0p-python3.13-tomli-2.4.0 /nix/store/czv9zg6baj2si78hk4cp94k05f95kcbm-python3.13-ttp-0.10.1 /nix/store/2108y7hmmllc7rd7a07nzmk6k8lmxrmg-python3.13-typing-extensions-4.16.0 /nix/store/31xd21w1sf7canpi28wzanb3pkrz4ip6-python3.13-u-msgpack-python-2.8.0 /nix/store/zqsipfvv0f7jyvqnvnz94xlfvi6lbasa-python3.13-ukkonen-1.1.0 /nix/store/fh5081nmw2z1zvvhdz7dpivc38sa3v5h-python3.13-urllib3-2.7.0 /nix/store/n1pzb4jb2zb8akjypiyxhbghr5w515v8-python3.13-virtualenv-20.36.1 /nix/store/57ryfp7ln0rxv81wgxlhclzyrxr3p1i8-python3.13-wcmatch-10.1 /nix/store/2dgjrfbl6811f8ah35riksls6jvkb7gz-python3.13-yamllint-1.37.1 /nix/store/csmffnqixsr19vv1kvammg18wc7k9i70-python3.13-yangson-1.7.6 /nix/store/yd7ciycx76r0pxks76b9xmrpr7nxs6ip-python3.13-yarl-1.23.0 /nix/store/nk0i7998134fay48vzx2mx8kvb96l1bf-python3.13-zipp-3.23.1 /nix/store/dayax1xwlbdcksxkrv3v0b1jf5gbm8wp-ruff-0.15.14 /nix/store/z71cv5qjdl2z0w6rv92axj3rmj7xg735-shellcheck-0.11.0-bin /nix/store/02y5zff6l8dzzc0ri98j093yd3a95wsy-shfmt-3.13.1 /nix/store/pmx8kvc8hqb7021wzqbnv3zs2sykjvd9-treefmt-2.6.0 /nix/store/qx07a3bbhcfl7vwldysnahdxr7cl91if-yq-go-4.53.2 /nix/store/72y4rq182cva4ibmircj6vfgdnxzs5zm-zlib-ng-2.3.3 building '/nix/store/lfvq21zpwp7313npbp4dhb4nhkiphrch-versioning-scheme.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/pzw54rm3kjyiq6mipkgkycm1f3v3d2rf-packer-1.15.3.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/lfvq21zpwp7313npbp4dhb4nhkiphrch-versioning-scheme.drv' building '/nix/store/pzw54rm3kjyiq6mipkgkycm1f3v3d2rf-packer-1.15.3.drv' packer-1.15.3> Running phase: unpackPhase packer-1.15.3> unpacking source archive /nix/store/7x2sx2hgjbn9x5js54qhhr1iyp9p4gkd-source packer-1.15.3> source root is source packer-1.15.3> Running phase: patchPhase packer-1.15.3> Running phase: updateAutotoolsGnuConfigScriptsPhase packer-1.15.3> Running phase: configurePhase packer-1.15.3> Running phase: buildPhase packer-1.15.3> Building subPackage ./. packer-1.15.3> buildPhase completed in 2 minutes 31 seconds packer-1.15.3> Running phase: checkPhase packer-1.15.3> ok github.com/hashicorp/packer 0.123s packer-1.15.3> checkPhase completed in 3 minutes 45 seconds packer-1.15.3> Running phase: installPhase packer-1.15.3> Running phase: fixupPhase packer-1.15.3> shrinking RPATHs of ELF executables and libraries in /nix/store/5bpngdzamxr7xix1sidyjfw002bbx4ad-packer-1.15.3 packer-1.15.3> shrinking /nix/store/5bpngdzamxr7xix1sidyjfw002bbx4ad-packer-1.15.3/bin/packer packer-1.15.3> checking for references to /build/ in /nix/store/5bpngdzamxr7xix1sidyjfw002bbx4ad-packer-1.15.3... packer-1.15.3> patching script interpreter paths in /nix/store/5bpngdzamxr7xix1sidyjfw002bbx4ad-packer-1.15.3 packer-1.15.3> stripping (with command strip and flags -S -p) in /nix/store/5bpngdzamxr7xix1sidyjfw002bbx4ad-packer-1.15.3/bin building '/nix/store/4mildlfld4w07p4am7r76vhvrbsjw90s-treefmt-nix-packer-fmt-wrapper.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/4mildlfld4w07p4am7r76vhvrbsjw90s-treefmt-nix-packer-fmt-wrapper.drv' building '/nix/store/dkkb5iwa7f6d7vil43b2v4q79ma55p6f-treefmt.toml.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/dkkb5iwa7f6d7vil43b2v4q79ma55p6f-treefmt.toml.drv' treefmt.toml> structuredAttrs is enabled treefmt.toml> building '/nix/store/2iljnk91nw2w3n2clib0w5pn3yvr3ngk-treefmt.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/2iljnk91nw2w3n2clib0w5pn3yvr3ngk-treefmt.drv' building '/nix/store/dmxiszngf10rsyjjgzqzbkln0lz3a626-pre-commit-config.json.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/dmxiszngf10rsyjjgzqzbkln0lz3a626-pre-commit-config.json.drv' pre-commit-config.json> Sourcing pytest-check-hook pre-commit-config.json> Using pytestCheckPhase building '/nix/store/lmsf7jzcjhwcgl13nd5gzx5y9pql87ps-pre-commit-run.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/lmsf7jzcjhwcgl13nd5gzx5y9pql87ps-pre-commit-run.drv' pre-commit-run> Sourcing pytest-check-hook pre-commit-run> Using pytestCheckPhase pre-commit-run> Running phase: unpackPhase pre-commit-run> unpacking source archive /nix/store/rjsgk3r75wlawnp5kx4r4fvzs7na54pi-source pre-commit-run> source root is source pre-commit-run> Running phase: patchPhase pre-commit-run> Running phase: updateAutotoolsGnuConfigScriptsPhase pre-commit-run> Running phase: configurePhase pre-commit-run> no configure script, doing nothing pre-commit-run> Running phase: buildPhase pre-commit-run> Running: $ pre-commit run --all-files pre-commit-run> actionlint...............................................................Passed pre-commit-run> - hook id: actionlint pre-commit-run> - duration: 0.07s pre-commit-run> ansible-lint.............................................................Passed pre-commit-run> - hook id: ansible-lint pre-commit-run> - duration: 35.02s pre-commit-run> pre-commit-run> [WARNING]: Deprecation warnings can be disabled by setting `deprecation_warnings=False` in ansible.cfg. pre-commit-run> [DEPRECATION WARNING]: Importing 'to_bytes' from 'ansible.module_utils._text' is deprecated. This feature will be removed from ansible-core version 2.24. Use ansible.module_utils.common.text.converters instead. pre-commit-run> /nix/store/q8nb6njf3b23ck6c7zhj21him72xx2j1-python3.13-pathspec-1.0.4/lib/python3.13/site-packages/pathspec/pathspec.py:260: DeprecationWarning: GitWildMatchPattern ('gitwildmatch') is deprecated. Use 'gitignore' for GitIgnoreBasicPattern or GitIgnoreSpecPattern instead. pre-commit-run> patterns = [pattern_factory(line) for line in lines if line] pre-commit-run> /nix/store/q8nb6njf3b23ck6c7zhj21him72xx2j1-python3.13-pathspec-1.0.4/lib/python3.13/site-packages/pathspec/pattern.py:125: DeprecationWarning: GitWildMatchPattern ('gitwildmatch') is deprecated. Use 'gitignore' for GitIgnoreBasicPattern or GitIgnoreSpecPattern instead. pre-commit-run> regex, include = self.pattern_to_regex(pattern) pre-commit-run> /nix/store/q8nb6njf3b23ck6c7zhj21him72xx2j1-python3.13-pathspec-1.0.4/lib/python3.13/site-packages/pathspec/pathspec.py:260: DeprecationWarning: GitWildMatchPattern ('gitwildmatch') is deprecated. Use 'gitignore' for GitIgnoreBasicPattern or GitIgnoreSpecPattern instead. pre-commit-run> patterns = [pattern_factory(line) for line in lines if line] pre-commit-run> /nix/store/q8nb6njf3b23ck6c7zhj21him72xx2j1-python3.13-pathspec-1.0.4/lib/python3.13/site-packages/pathspec/pattern.py:125: DeprecationWarning: GitWildMatchPattern ('gitwildmatch') is deprecated. Use 'gitignore' for GitIgnoreBasicPattern or GitIgnoreSpecPattern instead. pre-commit-run> regex, include = self.pattern_to_regex(pattern) pre-commit-run> WARNING Ignored exception from ArgsRule.matchtasks while processing ansible/tasks/setup-system.yml (tasks): [Errno 36] File name too long: '{"ANSIBLE_MODULE_ARGS": {"name": "ubuntu", "uid": "{{ uids.ubuntu }}", "group": "ubuntu", "groups": ["adm", "audio", "cdrom", "dialout", "dip", "floppy", "lxd", "netdev", "plugdev", "sudo", "video"], "comment": "Ubuntu", "create_home": true, "password_lock": true, "shell": "/bin/bash", "state": "present"}}' pre-commit-run> WARNING Ignored exception from ArgsRule.matchtasks while processing ansible/tasks/stage2-setup-postgres.yml (tasks): [Errno 36] File name too long: '{"ANSIBLE_MODULE_ARGS": {"group": "postgres", "mode": "{{ file_item[\'mode\'] | default(\'0755\', true) }}", "owner": "{{ file_item[\'owner\'] | default(\'postgres\', true) }}", "path": "{{ file_item[\'path\'] }}", "state": "{{ file_item[\'state\'] | default(\'directory\', true) }}"}}' pre-commit-run> WARNING Found incompatible custom yamllint configuration (.yamllint), please either remove the file or edit it to comply with: pre-commit-run> - comments.min-spaces-from-content must be 1. pre-commit-run> pre-commit-run> Read https://ansible.readthedocs.io/projects/lint/rules/yaml/ for more details regarding why we have these requirements. Fix mode will not be available. pre-commit-run> WARNING Listing 367 violation(s) marked as ignored, likely already known pre-commit-run> yaml[empty-lines]: Too many blank lines (1 > 0) (warning) # ignored pre-commit-run> ansible/files/envoy_config/cds.yaml:86 pre-commit-run> pre-commit-run> yaml[empty-lines]: Too many blank lines (1 > 0) (warning) # ignored pre-commit-run> ansible/files/envoy_config/envoy.yaml:23 pre-commit-run> pre-commit-run> yaml[empty-lines]: Too many blank lines (1 > 0) (warning) # ignored pre-commit-run> ansible/files/envoy_config/lds.supabase.yaml:406 pre-commit-run> pre-commit-run> yaml[empty-lines]: Too many blank lines (1 > 0) (warning) # ignored pre-commit-run> ansible/files/envoy_config/lds.yaml:450 pre-commit-run> pre-commit-run> name[play]: All plays should be named. (warning) # ignored pre-commit-run> ansible/playbook.yml:1:3 pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:23:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> name[missing]: All tasks should be named. (warning) # ignored pre-commit-run> ansible/playbook.yml:23 Task/Handler: import_tasks tasks/setup-system.yml pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:26:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:29:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:32:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:36:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:39:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:45:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:48:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:59:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:66:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:73:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:79:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:85:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:91:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/playbook.yml:95 Task/Handler: Adjust APT update intervals pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/playbook.yml:97:7 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/playbook.yml:101 Task/Handler: Transfer init SQL files pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/playbook.yml:103:7 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:108 Task/Handler: Create postgres role pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:112:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> command-instead-of-shell: Use shell only when shell functionality is required. (warning) # ignored pre-commit-run> ansible/playbook.yml:115 Task/Handler: Execute init SQL files pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:115 Task/Handler: Execute init SQL files pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:119:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/playbook.yml:125:7 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:132:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:138:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:144:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (apt). (warning) # ignored pre-commit-run> ansible/playbook.yml:149:7 Use `ansible.builtin.apt` or `ansible.legacy.apt` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:155:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:161:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:165 Task/Handler: Purge snapd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:168:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> command-instead-of-module: systemctl used in place of systemd module (warning) # ignored pre-commit-run> ansible/playbook.yml:171 Task/Handler: Run permission checks pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:171 Task/Handler: Run permission checks pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:174:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> command-instead-of-module: systemctl used in place of systemd module (warning) # ignored pre-commit-run> ansible/playbook.yml:179 Task/Handler: Run fail2ban configuration checks pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:179 Task/Handler: Run fail2ban configuration checks pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:182:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/playbook.yml:187 Task/Handler: Run supascan baseline validation pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/playbook.yml:189:7 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:197:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:202:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (import_tasks). (warning) # ignored pre-commit-run> ansible/playbook.yml:206:7 Use `ansible.builtin.import_tasks` or `ansible.legacy.import_tasks` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:1 Task/Handler: PG logging conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:7:9 Task/Handler: auto_explain, pg_cron, and pg_net confs pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:7 Task/Handler: auto_explain, pg_cron, and pg_net confs pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:74 Task/Handler: Disable cron access pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:75:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/finalize-ami.yml:109:9 Task/Handler: import pgsodium_getkey script pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/fix-ipv6-ndisc.yml:2:9 Task/Handler: fix Network - systemd timer and service file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/fix-ipv6-ndisc.yml:15:9 Task/Handler: fix Network - detect script pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/fix-ipv6-ndisc.yml:23:9 Task/Handler: fix Network - reload systemd pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/fix-ipv6-ndisc.yml:27:9 Task/Handler: fix Network - ensure systemd timer is installed but disabled pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:1:9 Task/Handler: adminapi - system group pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:7:9 Task/Handler: adminapi - system user pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:15:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:27:9 Task/Handler: give adminapi user permissions pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:28:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:34:9 Task/Handler: perms for adminapi pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:34 Task/Handler: perms for adminapi pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:35:3 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:38 Task/Handler: Download adminapi archive pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (get_url). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:39:3 Use `ansible.builtin.get_url` or `ansible.legacy.get_url` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:45:9 Task/Handler: adminapi - unpack archive in /opt pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (unarchive). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:46:3 Use `ansible.builtin.unarchive` or `ansible.legacy.unarchive` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:52:9 Task/Handler: adminapi - config dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:52 Task/Handler: adminapi - config dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:53:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:58:9 Task/Handler: adminapi - pg_upgrade scripts dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:58 Task/Handler: adminapi - pg_upgrade scripts dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:59:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:65:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:79:9 Task/Handler: adminapi - create service file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:79 Task/Handler: adminapi - create service file pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:80:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:84:9 Task/Handler: adminapi - create service file for commence backup process pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:84 Task/Handler: adminapi - create service file for commence backup process pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:85:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:89:9 Task/Handler: adminapi - create service file for commence restore process pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:89 Task/Handler: adminapi - create service file for commence restore process pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:90:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> fqcn[action]: Use FQCN for module actions, such `community.general.ufw`. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:95:3 Action `ufw` is not FQCN. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:99:9 Task/Handler: adminapi - reload systemd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:100:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:103:9 Task/Handler: adminapi - grant extra priviliges to user pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:103 Task/Handler: adminapi - grant extra priviliges to user pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-api.yml:104:3 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-mgr.yml:1 Task/Handler: Download admin-mgr archive pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (get_url). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-mgr.yml:2:3 Use `ansible.builtin.get_url` or `ansible.legacy.get_url` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-mgr.yml:12:9 Task/Handler: admin-mgr - unpack archive in /usr/bin/ pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (unarchive). (warning) # ignored pre-commit-run> ansible/tasks/internal/admin-mgr.yml:13:3 Use `ansible.builtin.unarchive` or `ansible.legacy.unarchive` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:1 Task/Handler: Collect Postgres binaries - create collection directory pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:2:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:6 Task/Handler: Collect Postgres binaries - collect binaries and libraries pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:7:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:15 Task/Handler: Collect Postgres libraries - collect libraries which are in /usr/lib/postgresql/lib/ pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:16:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:21 Task/Handler: Collect Postgres libraries - collect libraries which are in /var/lib/postgresql/extension/ pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:22:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:27 Task/Handler: Collect Postgres libraries - collect latest libpq pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:28:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:33 Task/Handler: Collect Postgres binaries - collect shared files pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:34:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:39 Task/Handler: Collect Postgres binaries - create tarfile pre-commit-run> pre-commit-run> fqcn[action]: Use FQCN for module actions, such `community.general.archive`. (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:40:3 Action `archive` is not FQCN. pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (fetch). (warning) # ignored pre-commit-run> ansible/tasks/internal/collect-pg-binaries.yml:46:3 Use `ansible.builtin.fetch` or `ansible.legacy.fetch` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-aws-cli.yml:20 Task/Handler: AWS CLI - get pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-aws-cli.yml:37 Task/Handler: AWS CLI - install pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-aws-cli.yml:42:9 Task/Handler: install utilities to manage Amazon EC2 instance storage pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-aws-cli.yml:48 Task/Handler: AWS CLI - configure ipv6 support for s3 pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:4:7 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:9:13 Task/Handler: salt gpg key pre-commit-run> pre-commit-run> jinja[spacing]: Jinja2 spacing could be improved: {{salt_artifacts['url']}} -> {{ salt_artifacts['url'] }} (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:11:14 Jinja2 template rewrite recommendation: `{{ salt_artifacts['url'] }}`. pre-commit-run> pre-commit-run> jinja[spacing]: Jinja2 spacing could be improved: {{salt_artifacts['checksum']}} -> {{ salt_artifacts['checksum'] }} (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:12:19 Jinja2 template rewrite recommendation: `{{ salt_artifacts['checksum'] }}`. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:20:13 Task/Handler: salt apt repo pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (apt). (warning) # ignored pre-commit-run> ansible/tasks/internal/install-salt.yml:27:3 Use `ansible.builtin.apt` or `ansible.legacy.apt` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/optimizations.yml:1:9 Task/Handler: ensure services are stopped and disabled for first boot nix build pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/optimizations.yml:3:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/optimizations.yml:15:9 Task/Handler: disable man-db pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/optimizations.yml:18:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:1:9 Task/Handler: pg_egress_collect - install tcpdump and perl async lib pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (apt). (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:2:3 Use `ansible.builtin.apt` or `ansible.legacy.apt` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:7:9 Task/Handler: pg_egress_collect - create service file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:7 Task/Handler: pg_egress_collect - create service file pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:8:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:12:9 Task/Handler: pg_egress_collect - reload systemd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:13:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> yaml[empty-lines]: Too many blank lines (1 > 0) (warning) # ignored pre-commit-run> ansible/tasks/internal/pg_egress_collect.yml:15 pre-commit-run> pre-commit-run> fqcn[action]: Use FQCN for module actions, such `community.general.ufw`. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:2:3 Action `ufw` is not FQCN. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:6:9 Task/Handler: create directories - systemd unit pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:7:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:14:9 Task/Handler: create directories - service files pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:15:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:23:9 Task/Handler: download postgres exporter pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:23 Task/Handler: download postgres exporter pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (get_url). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:24:3 Use `ansible.builtin.get_url` or `ansible.legacy.get_url` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:34:9 Task/Handler: expand postgres exporter pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (unarchive). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:35:3 Use `ansible.builtin.unarchive` or `ansible.legacy.unarchive` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:42:9 Task/Handler: exporter create a service pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:42 Task/Handler: exporter create a service pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:43:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:47:9 Task/Handler: exporter ensure service is present pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgres-exporter.yml:48:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/postgresql-prestart.yml:1:9 Task/Handler: postgres_prestart - create service file pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/postgresql-prestart.yml:2:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:1:9 Task/Handler: install ansible pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:1 Task/Handler: install ansible pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:2:3 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:10:9 Task/Handler: ansible pull systemd units pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:10 Task/Handler: ansible pull systemd units pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:11:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:18:9 Task/Handler: create facts dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:18 Task/Handler: create facts dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:19:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:23:9 Task/Handler: ansible facts pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:23 Task/Handler: ansible facts pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:24:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:28:9 Task/Handler: reload systemd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-ansible-pull.yml:29:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:1:9 Task/Handler: nftables overrides pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:1 Task/Handler: nftables overrides pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:2:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:7:9 Task/Handler: nftables empty config pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:7 Task/Handler: nftables empty config pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:8:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:13:9 Task/Handler: include managed config pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:13 Task/Handler: include managed config pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:14:3 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:21:9 Task/Handler: install per-user egress filters pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:22:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:29:9 Task/Handler: include per-user egress filters pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (blockinfile). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:30:3 Use `ansible.builtin.blockinfile` or `ansible.legacy.blockinfile` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:38:9 Task/Handler: check the full nftables config parses pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (command). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:39:3 Use `ansible.builtin.command` or `ansible.legacy.command` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:42:9 Task/Handler: ufw overrides dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:42 Task/Handler: ufw overrides dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:43:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:48 Task/Handler: Custom systemd overrides pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:49:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:53:9 Task/Handler: reload systemd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/setup-nftables.yml:54:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:1:9 Task/Handler: supabase-admin-agent - system group pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:7:9 Task/Handler: supabase-admin-agent - system user pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:17:9 Task/Handler: supabase-admin-agent - config dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:17 Task/Handler: supabase-admin-agent - config dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:18:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:23:9 Task/Handler: supabase-admin-agent - gpg dir pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:23 Task/Handler: supabase-admin-agent - gpg dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:24:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:30:9 Task/Handler: give supabase-admin-agent user permissions pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:31:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:36:9 Task/Handler: supabase-admin-agent - pgbackrest helper scripts dir pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (file). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:37:3 Use `ansible.builtin.file` or `ansible.legacy.file` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:44:9 Task/Handler: supabase-admin-agent - pgdata-chown script pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:45:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:53:9 Task/Handler: supabase-admin-agent - pgdata-signal script pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (copy). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:54:3 Use `ansible.builtin.copy` or `ansible.legacy.copy` instead. pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:63 Task/Handler: Download supabase-admin-agent archive pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (get_url). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:64:3 Use `ansible.builtin.get_url` or `ansible.legacy.get_url` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:74:9 Task/Handler: supabase-admin-agent - unpack archive in /opt pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (unarchive). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:75:3 Use `ansible.builtin.unarchive` or `ansible.legacy.unarchive` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:83:9 Task/Handler: supabase-admin-agent - create symlink pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:92:9 Task/Handler: supabase-admin-agent - create salt systemd timer file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:92 Task/Handler: supabase-admin-agent - create salt systemd timer file pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:93:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:97:9 Task/Handler: supabase-admin-agent - create salt service file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:97 Task/Handler: supabase-admin-agent - create salt service file pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (template). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:98:3 Use `ansible.builtin.template` or `ansible.legacy.template` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:102:9 Task/Handler: supabase-admin-agent - reload systemd pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:103:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:107:9 Task/Handler: supabase-admin-agent - DISABLE service pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (systemd). (warning) # ignored pre-commit-run> ansible/tasks/internal/supabase-admin-agent.yml:108:3 Use `ansible.builtin.systemd` or `ansible.legacy.systemd` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:2:9 Task/Handler: do stage1 tasks pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:5:13 Task/Handler: extend the default bantime to an hour pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:12:13 Task/Handler: configure journald pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:12 Task/Handler: configure journald pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:17:13 Task/Handler: configure fail2ban to use nftables pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:17 Task/Handler: configure fail2ban to use nftables pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:23:13 Task/Handler: import jail.d/postgresql.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:23 Task/Handler: import jail.d/postgresql.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:29:13 Task/Handler: import filter.d/postgresql.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:29 Task/Handler: import filter.d/postgresql.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:35:13 Task/Handler: create overrides dir pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:43:13 Task/Handler: custom systemd overrides pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:43 Task/Handler: custom systemd overrides pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:48:13 Task/Handler: add in supabase specific ignore filters pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-fail2ban.yml:65:13 Task/Handler: fail2ban - disable service pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:20:9 Task/Handler: gotrue - download commit archive pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:20 Task/Handler: gotrue - download commit archive pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:30:9 Task/Handler: gotrue - create /opt/gotrue and /etc/auth.d pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:42:9 Task/Handler: gotrue - unpack archive in /opt/gotrue pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:56:9 Task/Handler: gotrue - create service file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:56 Task/Handler: gotrue - create service file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:61:9 Task/Handler: gotrue - create optimizations file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:61 Task/Handler: gotrue - create optimizations file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-gotrue.yml:66:9 Task/Handler: gotrue - reload systemd pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:23 Task/Handler: Kong - download deb package pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (get_url). (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:24:3 Use `ansible.builtin.get_url` or `ansible.legacy.get_url` instead. pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:37 Task/Handler: Kong - ensure it is NOT autoremoved pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:41 Task/Handler: Kong - configuration pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:61 Task/Handler: Kong - create env file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kong.yml:66 Task/Handler: Kong - create service file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:3:9 Task/Handler: phc2sys - install pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:8:9 Task/Handler: phc2sys - create service file pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:8 Task/Handler: phc2sys - create service file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:13:9 Task/Handler: phc2sys - enable service pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:20:9 Task/Handler: phc2sys - remove systemd-timesyncd pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:29:9 Task/Handler: ptp_kvm.ko - enable pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-kvm-timesync.yml:29 Task/Handler: ptp_kvm.ko - enable pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-migrations.yml:1:9 Task/Handler: run stage2 tasks pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-migrations.yml:4 Task/Handler: Run migrate.sh script pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-migrations.yml:13 Task/Handler: Create /root/MIGRATION-AMI file pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:18 Task/Handler: Install PgBouncer from nix binary cache pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:47:9 Task/Handler: create PgBouncer placeholder config files pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:76:9 Task/Handler: import /etc/tmpfiles.d/pgbouncer.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:76 Task/Handler: import /etc/tmpfiles.d/pgbouncer.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:99:9 Task/Handler: import jail.d/pgbouncer.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:99 Task/Handler: import jail.d/pgbouncer.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:105:9 Task/Handler: import filter.d/pgbouncer.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:105 Task/Handler: import filter.d/pgbouncer.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-pgbouncer.yml:112 Task/Handler: PgBouncer - import pgbouncer.service pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:1:9 Task/Handler: execute stage1 tasks pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:6:13 Task/Handler: create ssl-cert group pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:12:13 Task/Handler: create postgres group pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:18:13 Task/Handler: create postgres user pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:71:13 Task/Handler: create placeholder config files pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:84:13 Task/Handler: import postgresql.conf, pg_hba.conf, and pg_ident.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:84 Task/Handler: import postgresql.conf, pg_hba.conf, and pg_ident.conf pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:134 Task/Handler: Make sure .bashrc exists pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:141:9 Task/Handler: execute stage2 tasks pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:144:13 Task/Handler: install locales pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:149:13 Task/Handler: configure locales pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:149 Task/Handler: configure locales pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:161:13 Task/Handler: locale-gen pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:161 Task/Handler: locale-gen pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:165:13 Task/Handler: update-locale pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:165 Task/Handler: update-locale pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:173:13 Task/Handler: stage2 postgres tasks pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:188 Task/Handler: Initialize the database stage2 (PG15) pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:203 Task/Handler: Initialize the database stage2 (PG17+) pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:218:9 Task/Handler: copy PG apparmor profile pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:226:9 Task/Handler: ensure apparmor-utils are installed pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:230:9 Task/Handler: parse apparmor sbpostgres profile pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:230 Task/Handler: parse apparmor sbpostgres profile pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:234:9 Task/Handler: reload apparmor with sbpostgres profile pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:234 Task/Handler: reload apparmor with sbpostgres profile pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:238:9 Task/Handler: copy PG and optimizations systemd units pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:238 Task/Handler: copy PG and optimizations systemd units pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:249:9 Task/Handler: initialize pg required state pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:249 Task/Handler: initialize pg required state pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:259 Task/Handler: Restart Postgres Database without Systemd pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgres.yml:314 Task/Handler: Add lang and locale items to .bashrc pre-commit-run> pre-commit-run> jinja[spacing]: Jinja2 spacing could be improved: {{postgrest_artifacts['signingkey']['url']}} -> {{ postgrest_artifacts['signingkey']['url'] }} (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:16:10 Jinja2 template rewrite recommendation: `{{ postgrest_artifacts['signingkey']['url'] }}`. pre-commit-run> pre-commit-run> jinja[spacing]: Jinja2 spacing could be improved: {{postgrest_artifacts['signingkey']['checksum']}} -> {{ postgrest_artifacts['signingkey']['checksum'] }} (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:17:15 Jinja2 template rewrite recommendation: `{{ postgrest_artifacts['signingkey']['checksum'] }}`. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:57:9 Task/Handler: postgis - ensure dependencies do not get autoremoved pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:57 Task/Handler: postgis - ensure dependencies do not get autoremoved pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:61:9 Task/Handler: postgis - allow libnuma-dev to be autoremoved pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:61 Task/Handler: postgis - allow libnuma-dev to be autoremoved pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:65 Task/Handler: PostgREST - download ubuntu binary archive (arm) pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:84:9 Task/Handler: create directories pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:92:9 Task/Handler: empty files pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:92 Task/Handler: empty files pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:104:9 Task/Handler: create conf merging script pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-postgrest.yml:117 Task/Handler: PostgREST - create service files pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:5:9 Task/Handler: download Vector package pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:5 Task/Handler: download Vector package pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:23:9 Task/Handler: add vector system group pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:29:9 Task/Handler: add vector system user pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:40:9 Task/Handler: install Vector for logging pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (apt). (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:41:3 Use `ansible.builtin.apt` or `ansible.legacy.apt` instead. pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:45:9 Task/Handler: create service files for Vector pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:45 Task/Handler: create service files for Vector pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:50:9 Task/Handler: configure tmpfiles for postgres - overwrites upstream package pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:50 Task/Handler: configure tmpfiles for postgres - overwrites upstream package pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:55:9 Task/Handler: fix permissions for vector config to be managed pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:64:9 Task/Handler: vector - reload systemd pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:68 Task/Handler: Create checkpoints dir pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-supabase-internal.yml:125 Task/Handler: Envoy - use lds.supabase.yaml for /etc/envoy/lds.yaml pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:4:13 Task/Handler: supautils - add supautils to session_preload_libraries pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:11:13 Task/Handler: supautils - write custom supautils.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:19:13 Task/Handler: supautils - copy extension custom scripts pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:19 Task/Handler: supautils - copy extension custom scripts pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:25:13 Task/Handler: supautils - chown extension custom scripts pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-supautils.yml:34:13 Task/Handler: supautils - include /etc/postgresql-custom/supautils.conf in postgresql.conf pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:75:13 Task/Handler: restart ufw pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:80 Task/Handler: Create Sysstat log directory pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:85 Task/Handler: Configure sysstat pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:95 Task/Handler: Adjust APT update intervals pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:112 Task/Handler: Disable kexec handover pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:123 Task/Handler: Enable zswap pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:166 Task/Handler: System - Create services.slice pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:175 Task/Handler: Configure journald and logind pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:185:13 Task/Handler: reload systemd-journald pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:195:13 Task/Handler: enable timestamps for shell history pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:204:13 Task/Handler: configure systemd's pager pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:213:9 Task/Handler: set hosts file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:224:9 Task/Handler: configure NTP client pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:227:13 Task/Handler: ensure conf directory exists pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-system.yml:233:13 Task/Handler: configure NTP server pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-tmux.yml:1:9 Task/Handler: tmux - Install tmux pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-tmux.yml:7:9 Task/Handler: tmux - Configure tmux alias pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-tmux.yml:19:9 Task/Handler: tmux - Configure tmux pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/setup-tmux.yml:28:9 Task/Handler: tmux - Auto-logout from stale tmux pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-wal-g.yml:37 Task/Handler: Install wal-g 2 from nix binary cache pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/setup-wal-g.yml:45 Task/Handler: Install wal-g 3 from nix binary cache pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:65 Task/Handler: Install postgres env from nix binary cache pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:72 Task/Handler: Install and activate site env from nix binary cache pre-commit-run> pre-commit-run> yaml[commas]: Too many spaces before comma (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:87 pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:97:13 Task/Handler: import pgsodium_getkey script pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:119:13 Task/Handler: setup gatekeeper pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:124 Task/Handler: Create symbolic link for linux-pam to find pam_jit_pg.so pre-commit-run> pre-commit-run> fqcn[action-core]: Use FQCN for builtin module actions (shell). (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:126:15 Use `ansible.builtin.shell` or `ansible.legacy.shell` instead. pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:129 Task/Handler: Get gatekeeper version pre-commit-run> pre-commit-run> risky-shell-pipe: Shells that use pipes should set the pipefail option. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:129 Task/Handler: Get gatekeeper version pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:136 Task/Handler: Write version file pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:208:13 Task/Handler: create destination directory pre-commit-run> pre-commit-run> name[casing]: All names should start with an uppercase letter. (warning) # ignored pre-commit-run> ansible/tasks/stage2-setup-postgres.yml:215:13 Task/Handler: pgsodium - set pgsodium.getkey_script pre-commit-run> pre-commit-run> risky-file-permissions: File permissions unset or incorrect. (warning) # ignored pre-commit-run> ansible/tasks/test-image.yml:4 Task/Handler: Make a backup of the /etc/postgresql/postgresql.conf file pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/test-image.yml:41 Task/Handler: Restart Postgres Database in stage 2 to load all extensions pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/test-image.yml:58 Task/Handler: Re-enable PG Sodium references in /etc/postgresql/postgresql.conf pre-commit-run> pre-commit-run> no-changed-when: Commands should not change things if nothing needs doing. (warning) # ignored pre-commit-run> ansible/tasks/test-image.yml:82 Task/Handler: Restart Postgres Database in stage 2 to load all extensions pre-commit-run> pre-commit-run> pre-commit-run> Passed: 0 failure(s), 367 warning(s) on 169 files. Last profile that met the validation criteria was 'production'. pre-commit-run> pre-commit-run> shellcheck...............................................................Passed pre-commit-run> treefmt..................................................................Passed pre-commit-run> - hook id: treefmt pre-commit-run> - duration: 1.11s pre-commit-run> pre-commit-run> traversed 936 files pre-commit-run> emitted 233 files for processing pre-commit-run> formatted 233 files (0 changed) in 1.1s pre-commit-run> pre-commit-run> versioning-scheme........................................................Passed pre-commit-run> - hook id: versioning-scheme pre-commit-run> - duration: 0.02s