these 2 derivations will be built: /nix/store/d7hrkh41112rdj6yx7q37lfq5z40i7sw-nixos-test-driver-wal2json.drv /nix/store/b2cn377z3wk1p4lsihq06pqfr2kfvhjc-vm-test-run-wal2json.drv building '/nix/store/d7hrkh41112rdj6yx7q37lfq5z40i7sw-nixos-test-driver-wal2json.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/d7hrkh41112rdj6yx7q37lfq5z40i7sw-nixos-test-driver-wal2json.drv' nixos-test-driver-wal2json> Running type check (enable/disable: config.skipTypeCheck) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck nixos-test-driver-wal2json> Success: no issues found in 1 source file nixos-test-driver-wal2json> additionally exposed symbols: nixos-test-driver-wal2json> , nixos-test-driver-wal2json> , nixos-test-driver-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug nixos-test-driver-wal2json> Linting test script (enable/disable: config.skipLint) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint building '/nix/store/b2cn377z3wk1p4lsihq06pqfr2kfvhjc-vm-test-run-wal2json.drv' on 'ssh-ng://builder@mac-linux-builder' building '/nix/store/b2cn377z3wk1p4lsihq06pqfr2kfvhjc-vm-test-run-wal2json.drv' vm-test-run-wal2json> Machine state will be reset. To keep it, pass --keep-vm-state vm-test-run-wal2json> start all VLans vm-test-run-wal2json> start vlan vm-test-run-wal2json> running vlan (pid 7; ctl /build/vde1.ctl) vm-test-run-wal2json> (finished: start all VLans, in 0.00 seconds) vm-test-run-wal2json> Test will time out and terminate in 3600 seconds vm-test-run-wal2json> run the VM test script vm-test-run-wal2json> additionally exposed symbols: vm-test-run-wal2json> server, vm-test-run-wal2json> vlan1, vm-test-run-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug vm-test-run-wal2json> Running tests for extension: wal2json vm-test-run-wal2json> start all VMs vm-test-run-wal2json> server: starting vm vm-test-run-wal2json> mke2fs 1.47.3 (8-Jul-2025) vm-test-run-wal2json> qemu-system-aarch64: Could not access KVM kernel module: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: failed to initialize kvm: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: falling back to tcg vm-test-run-wal2json> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-wal2json> server # Formatting '/build/vm-state-server/tmp.pf98ZoyFhG', fmt=raw size=1073741824 vm-test-run-wal2json> server # Discarding device blocks: 0/262144 done vm-test-run-wal2json> server # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-wal2json> server # Filesystem UUID: d998f4ae-ad18-4831-be94-413903190ced vm-test-run-wal2json> server # Superblock backups stored on blocks: vm-test-run-wal2json> server # 32768, 98304, 163840, 229376 vm-test-run-wal2json> server # vm-test-run-wal2json> server # Allocating group tables: 0/8 done vm-test-run-wal2json> server # Writing inode tables: 0/8 done vm-test-run-wal2json> server # Creating journal (8192 blocks): done vm-test-run-wal2json> server # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-wal2json> server # vm-test-run-wal2json> server # Virtualisation disk image created. vm-test-run-wal2json> server: QEMU running (pid 9) vm-test-run-wal2json> (finished: start all VMs, in 0.15 seconds) vm-test-run-wal2json> server: waiting for unit multi-user.target vm-test-run-wal2json> server: waiting for the VM to finish booting vm-test-run-wal2json> server # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510] vm-test-run-wal2json> server # [ 0.000000] Linux version 6.12.63 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP Thu Dec 18 12:55:23 UTC 2025 vm-test-run-wal2json> server # [ 0.000000] KASLR enabled vm-test-run-wal2json> server # [ 0.000000] random: crng init done vm-test-run-wal2json> server # [ 0.000000] Machine model: linux,dummy-virt vm-test-run-wal2json> server # [ 0.000000] efi: UEFI not found. vm-test-run-wal2json> server # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT vm-test-run-wal2json> server # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] NODE_DATA(0) allocated [mem 0x13f602200-0x13f60593f] vm-test-run-wal2json> server # [ 0.000000] Zone ranges: vm-test-run-wal2json> server # [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] vm-test-run-wal2json> server # [ 0.000000] DMA32 empty vm-test-run-wal2json> server # [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Device empty vm-test-run-wal2json> server # [ 0.000000] Movable zone start for each node vm-test-run-wal2json> server # [ 0.000000] Early memory node ranges vm-test-run-wal2json> server # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 vm-test-run-wal2json> server # [ 0.000000] psci: probing for conduit method from DT. vm-test-run-wal2json> server # [ 0.000000] psci: PSCIv1.1 detected in firmware. vm-test-run-wal2json> server # [ 0.000000] psci: Using standard PSCI v0.2 function IDs vm-test-run-wal2json> server # [ 0.000000] psci: Trusted OS migration not required vm-test-run-wal2json> server # [ 0.000000] psci: SMC Calling Convention v1.0 vm-test-run-wal2json> server # [ 0.000000] percpu: Embedded 88 pages/cpu s180056 r65536 d114856 u360448 vm-test-run-wal2json> server # [ 0.000000] Detected PIPT I-cache on CPU0 vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: GIC system register CPU interface vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: HCRX_EL2 register vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: 52-bit Virtual Addressing (LPA2) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Spectre-v4 vm-test-run-wal2json> server # [ 0.000000] alternatives: applying boot alternatives vm-test-run-wal2json> server # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/j4gsgzj4fy9yqawqmf0pn2wmwcsvbzji-nixos-system-server-test/init regInfo=/nix/store/577mggvqsqhrz2z203rdc8ak48avlhrq-closure-info/registration console=ttyAMA0,115200n8 console=tty0 vm-test-run-wal2json> server # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/577mggvqsqhrz2z203rdc8ak48avlhrq-closure-info/registration", will be passed to user space. vm-test-run-wal2json> server # [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Fallback order for Node 0: 0 vm-test-run-wal2json> server # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 vm-test-run-wal2json> server # [ 0.000000] Policy zone: Normal vm-test-run-wal2json> server # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-wal2json> server # [ 0.000000] software IO TLB: area num 2. vm-test-run-wal2json> server # [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) vm-test-run-wal2json> server # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-wal2json> server # [ 0.000000] allocated 8388608 bytes of page_ext vm-test-run-wal2json> server # [ 0.000000] ftrace: allocating 72257 entries in 283 pages vm-test-run-wal2json> server # [ 0.000000] ftrace: allocated 283 pages with 5 groups vm-test-run-wal2json> server # [ 0.000000] rcu: Hierarchical RCU implementation. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU event tracing is enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] Rude variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] Tracing variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. vm-test-run-wal2json> server # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 vm-test-run-wal2json> server # [ 0.000000] GICv3: 256 SPIs implemented vm-test-run-wal2json> server # [ 0.000000] GICv3: 0 Extended SPIs implemented vm-test-run-wal2json> server # [ 0.000000] Root IRQ handler: gic_handle_irq vm-test-run-wal2json> server # [ 0.000000] GICv3: GICv3 features: 16 PPIs vm-test-run-wal2json> server # [ 0.000000] GICv3: GICD_CTRL.DS=1, SCR_EL3.FIQ=0 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 vm-test-run-wal2json> server # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @100ae0000 (indirect, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @100af0000 (flat, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] GICv3: using LPI property table @0x0000000100b00000 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100b10000 vm-test-run-wal2json> server # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-wal2json> server # [ 0.000000] arch_timer: cp15 timer(s) running at 1000.00MHz (virt). vm-test-run-wal2json> server # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-wal2json> server # [ 0.000039] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns vm-test-run-wal2json> server # [ 0.003908] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-wal2json> server # [ 0.014931] Console: colour dummy device 80x25 vm-test-run-wal2json> server # [ 0.016824] printk: legacy console [tty0] enabled vm-test-run-wal2json> server # [ 0.023108] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) vm-test-run-wal2json> server # [ 0.023535] pid_max: default: 32768 minimum: 301 vm-test-run-wal2json> server # [ 0.026429] LSM: initializing lsm=capability,landlock,yama,bpf vm-test-run-wal2json> server # [ 0.028333] landlock: Up and running. vm-test-run-wal2json> server # [ 0.028383] Yama: becoming mindful. vm-test-run-wal2json> server # [ 0.032429] LSM support for eBPF active vm-test-run-wal2json> server # [ 0.036970] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.037172] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.070256] cacheinfo: Unable to detect cache hierarchy for CPU 0 vm-test-run-wal2json> server # [ 0.082895] rcu: Hierarchical SRCU implementation. vm-test-run-wal2json> server # [ 0.082998] rcu: Max phase no-delay instances is 1000. vm-test-run-wal2json> server # [ 0.084708] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-wal2json> server # [ 0.091959] fsl-mc MSI: its@8080000 domain created vm-test-run-wal2json> server # [ 0.093888] EFI services will not be available. vm-test-run-wal2json> server # [ 0.096249] smp: Bringing up secondary CPUs ... vm-test-run-wal2json> server # [ 0.101131] Detected PIPT I-cache on CPU1 vm-test-run-wal2json> server # [ 0.102598] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000 vm-test-run-wal2json> server # [ 0.103542] GICv3: CPU1: using allocated LPI pending table @0x0000000100b20000 vm-test-run-wal2json> server # [ 0.105258] CPU1: Booted secondary processor 0x0000000001 [0x000f0510] vm-test-run-wal2json> server # [ 0.109601] smp: Brought up 1 node, 2 CPUs vm-test-run-wal2json> server # [ 0.109835] SMP: Total of 2 processors activated. vm-test-run-wal2json> server # [ 0.109882] CPU: All CPU(s) started at EL1 vm-test-run-wal2json> server # [ 0.110050] CPU features: detected: Branch Target Identification vm-test-run-wal2json> server # [ 0.110103] CPU features: detected: 32-bit EL0 Support vm-test-run-wal2json> server # [ 0.110134] CPU features: detected: 32-bit EL1 Support vm-test-run-wal2json> server # [ 0.110157] CPU features: detected: ARMv8.4 Translation Table Level vm-test-run-wal2json> server # [ 0.110188] CPU features: detected: Instruction cache invalidation not required for I/D coherence vm-test-run-wal2json> server # [ 0.110225] CPU features: detected: Data cache clean to the PoU not required for I/D coherence vm-test-run-wal2json> server # [ 0.110292] CPU features: detected: Common not Private translations vm-test-run-wal2json> server # [ 0.110321] CPU features: detected: CRC32 instructions vm-test-run-wal2json> server # [ 0.110342] CPU features: detected: Data cache clean to Point of Deep Persistence vm-test-run-wal2json> server # [ 0.110369] CPU features: detected: Data cache clean to Point of Persistence vm-test-run-wal2json> server # [ 0.110393] CPU features: detected: Data independent timing control (DIT) vm-test-run-wal2json> server # [ 0.110417] CPU features: detected: E0PD vm-test-run-wal2json> server # [ 0.110436] CPU features: detected: Enhanced Counter Virtualization vm-test-run-wal2json> server # [ 0.110459] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) vm-test-run-wal2json> server # [ 0.110483] CPU features: detected: Enhanced Privileged Access Never vm-test-run-wal2json> server # [ 0.110506] CPU features: detected: Enhanced Virtualization Traps vm-test-run-wal2json> server # [ 0.110529] CPU features: detected: Fine Grained Traps vm-test-run-wal2json> server # [ 0.110583] CPU features: detected: Generic authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.110668] CPU features: detected: RCpc load-acquire (LDAPR) vm-test-run-wal2json> server # [ 0.110715] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2) vm-test-run-wal2json> server # [ 0.110740] CPU features: detected: LSE atomic instructions vm-test-run-wal2json> server # [ 0.110761] CPU features: detected: Memory Copy and Memory Set instructions vm-test-run-wal2json> server # [ 0.110786] CPU features: detected: Privileged Access Never vm-test-run-wal2json> server # [ 0.110808] CPU features: detected: RAS Extension Support vm-test-run-wal2json> server # [ 0.110829] CPU features: detected: Random Number Generator vm-test-run-wal2json> server # [ 0.110851] CPU features: detected: Speculation barrier (SB) vm-test-run-wal2json> server # [ 0.110872] CPU features: detected: Stage-2 Force Write-Back vm-test-run-wal2json> server # [ 0.110895] CPU features: detected: Trap EL0 IMPLEMENTATION DEFINED functionality vm-test-run-wal2json> server # [ 0.110922] CPU features: detected: TLB range maintenance instructions vm-test-run-wal2json> server # [ 0.110945] CPU features: detected: WFx with timeout vm-test-run-wal2json> server # [ 0.110984] CPU features: detected: Speculative Store Bypassing Safe (SSBS) vm-test-run-wal2json> server # [ 0.111008] CPU features: detected: Scalable Vector Extension vm-test-run-wal2json> server # [ 0.116526] alternatives: applying system-wide alternatives vm-test-run-wal2json> server # [ 0.135637] CPU features: detected: Hardware dirty bit management on CPU0-1 vm-test-run-wal2json> server # [ 0.136452] SVE: maximum available vector length 256 bytes per vector vm-test-run-wal2json> server # [ 0.136550] SVE: default vector length 64 bytes per vector vm-test-run-wal2json> server # [ 0.149138] Memory: 3922804K/4194304K available (23296K kernel code, 6546K rwdata, 24596K rodata, 4416K init, 1047K bss, 223164K reserved, 32768K cma-reserved) vm-test-run-wal2json> server # [ 0.173847] devtmpfs: initialized vm-test-run-wal2json> server # [ 0.203363] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns vm-test-run-wal2json> server # [ 0.203903] futex hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.206827] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL vm-test-run-wal2json> server # [ 0.206911] 0 pages in range for non-PLT usage vm-test-run-wal2json> server # [ 0.206953] 509248 pages in range for PLT usage vm-test-run-wal2json> server # [ 0.209991] pinctrl core: initialized pinctrl subsystem vm-test-run-wal2json> server # [ 0.221728] DMI not present or invalid. vm-test-run-wal2json> server # [ 0.241970] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-wal2json> server # [ 0.253594] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations vm-test-run-wal2json> server # [ 0.255046] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-wal2json> server # [ 0.256165] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-wal2json> server # [ 0.256418] audit: initializing netlink subsys (disabled) vm-test-run-wal2json> server # [ 0.258593] audit: type=2000 audit(0.196:1): state=initialized audit_enabled=0 res=1 vm-test-run-wal2json> server # [ 0.264839] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-wal2json> server # [ 0.264892] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-wal2json> server # [ 0.264948] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-wal2json> server # [ 0.264975] thermal_sys: Registered thermal governor 'user_space' vm-test-run-wal2json> server # [ 0.264999] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-wal2json> server # [ 0.265951] cpuidle: using governor ladder vm-test-run-wal2json> server # [ 0.266438] cpuidle: using governor menu vm-test-run-wal2json> server # [ 0.268586] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. vm-test-run-wal2json> server # [ 0.269890] ASID allocator initialised with 65536 entries vm-test-run-wal2json> server # [ 0.278181] Serial: AMBA PL011 UART driver vm-test-run-wal2json> server # [ 0.329121] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 vm-test-run-wal2json> server # [ 0.330724] printk: legacy console [ttyAMA0] enabled vm-test-run-wal2json> server # [ 0.369187] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.369407] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-wal2json> server # [ 0.369508] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.369611] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page vm-test-run-wal2json> server # [ 0.369770] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.370285] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-wal2json> server # [ 0.370603] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.370732] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page vm-test-run-wal2json> server # [ 0.385554] fbcon: Taking over console vm-test-run-wal2json> server # [ 0.386239] ACPI: Interpreter disabled. vm-test-run-wal2json> server # [ 0.394241] iommu: Default domain type: Translated vm-test-run-wal2json> server # [ 0.394786] iommu: DMA domain TLB invalidation policy: strict mode vm-test-run-wal2json> server # [ 0.398736] SCSI subsystem initialized vm-test-run-wal2json> server # [ 0.400758] usbcore: registered new interface driver usbfs vm-test-run-wal2json> server # [ 0.401438] usbcore: registered new interface driver hub vm-test-run-wal2json> server # [ 0.402269] usbcore: registered new device driver usb vm-test-run-wal2json> server # [ 0.405113] pps_core: LinuxPPS API ver. 1 registered vm-test-run-wal2json> server # [ 0.405495] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti vm-test-run-wal2json> server # [ 0.406456] PTP clock support registered vm-test-run-wal2json> server # [ 0.407535] EDAC MC: Ver: 3.0.0 vm-test-run-wal2json> server # [ 0.409601] scmi_core: SCMI protocol bus registered vm-test-run-wal2json> server # [ 0.413231] FPGA manager framework vm-test-run-wal2json> server # [ 0.415067] Advanced Linux Sound Architecture Driver Initialized. vm-test-run-wal2json> server # [ 0.425117] vgaarb: loaded vm-test-run-wal2json> server # [ 0.429534] clocksource: Switched to clocksource arch_sys_counter vm-test-run-wal2json> server # [ 0.432322] VFS: Disk quotas dquot_6.6.0 vm-test-run-wal2json> server # [ 0.432657] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-wal2json> server # [ 0.437070] netfs: FS-Cache loaded vm-test-run-wal2json> server # [ 0.438905] pnp: PnP ACPI: disabled vm-test-run-wal2json> server # [ 0.460169] NET: Registered PF_INET protocol family vm-test-run-wal2json> server # [ 0.461488] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-wal2json> server # [ 0.580632] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.581100] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.581753] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.583079] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) vm-test-run-wal2json> server # [ 0.583839] TCP: Hash tables configured (established 32768 bind 32768) vm-test-run-wal2json> server # [ 0.585170] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear) vm-test-run-wal2json> server # [ 0.586031] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.586615] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.587946] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-wal2json> server # [ 0.588418] NET: Registered PF_XDP protocol family vm-test-run-wal2json> server # [ 0.588761] PCI: CLS 0 bytes, default 64 vm-test-run-wal2json> server # [ 0.593583] Trying to unpack rootfs image as initramfs... vm-test-run-wal2json> server # [ 0.595230] kvm [1]: HYP mode not available vm-test-run-wal2json> server # [ 0.704188] Initialise system trusted keyrings vm-test-run-wal2json> server # [ 0.706256] workingset: timestamp_bits=42 max_order=20 bucket_order=0 vm-test-run-wal2json> server # [ 0.709956] squashfs: version 4.0 (2009/01/31) Phillip Lougher vm-test-run-wal2json> server # [ 0.711193] 9p: Installing v9fs 9p2000 file system support vm-test-run-wal2json> server # [ 0.772579] Key type asymmetric registered vm-test-run-wal2json> server # [ 0.772807] Asymmetric key parser 'x509' registered vm-test-run-wal2json> server # [ 0.773256] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) vm-test-run-wal2json> server # [ 0.774671] io scheduler mq-deadline registered vm-test-run-wal2json> server # [ 0.774958] io scheduler kyber registered vm-test-run-wal2json> server # [ 0.800617] pl061_gpio 9030000.pl061: PL061 GPIO chip registered vm-test-run-wal2json> server # [ 0.805851] ledtrig-cpu: registered to indicate activity on CPUs vm-test-run-wal2json> server # [ 0.810268] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: vm-test-run-wal2json> server # [ 0.810997] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 vm-test-run-wal2json> server # [ 0.811569] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 vm-test-run-wal2json> server # [ 0.811758] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 vm-test-run-wal2json> server # [ 0.812270] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits vm-test-run-wal2json> server # [ 0.813004] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] vm-test-run-wal2json> server # [ 0.815523] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 vm-test-run-wal2json> server # [ 0.815906] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-wal2json> server # [ 0.816088] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.816215] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.816325] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.817957] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.821105] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.822161] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.822439] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.822583] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.822735] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.823348] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.823504] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.823601] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.823718] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.824193] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.824349] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.824441] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.824548] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.824984] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.825663] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.825946] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.826071] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.826583] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.826937] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.827203] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.827325] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.827811] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.827976] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] vm-test-run-wal2json> server # [ 0.828077] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.828188] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.828888] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.829242] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.830460] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.830837] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.830965] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.831490] pci 0000:00:08.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.831779] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.831957] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.832971] pci 0000:00:09.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.833125] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.833670] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.834846] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.835289] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.836133] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.836557] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.837459] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.837721] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.838206] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.838368] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.838467] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.838576] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.842147] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned vm-test-run-wal2json> server # [ 0.842633] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned vm-test-run-wal2json> server # [ 0.843103] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.843397] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.843656] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.843801] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.843941] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.844087] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.844218] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.844348] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.844476] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.844603] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.845000] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.845582] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned vm-test-run-wal2json> server # [ 0.846073] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned vm-test-run-wal2json> server # [ 0.846325] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned vm-test-run-wal2json> server # [ 0.846443] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned vm-test-run-wal2json> server # [ 0.847697] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned vm-test-run-wal2json> server # [ 0.847988] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned vm-test-run-wal2json> server # [ 0.848104] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned vm-test-run-wal2json> server # [ 0.848496] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned vm-test-run-wal2json> server # [ 0.849737] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned vm-test-run-wal2json> server # [ 0.849911] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned vm-test-run-wal2json> server # [ 0.850084] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned vm-test-run-wal2json> server # [ 0.850459] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned vm-test-run-wal2json> server # [ 0.850580] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned vm-test-run-wal2json> server # [ 0.850701] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned vm-test-run-wal2json> server # [ 0.850804] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned vm-test-run-wal2json> server # [ 0.851194] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned vm-test-run-wal2json> server # [ 0.851297] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned vm-test-run-wal2json> server # [ 0.851400] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned vm-test-run-wal2json> server # [ 0.851503] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned vm-test-run-wal2json> server # [ 0.851602] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned vm-test-run-wal2json> server # [ 0.851701] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned vm-test-run-wal2json> server # [ 0.851978] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.852087] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.852194] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.854029] pci 0000:00:0a.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.917269] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.921906] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.924104] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.928067] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.931871] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.934587] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.936834] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.939143] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.940984] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.945221] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.947468] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.964709] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-wal2json> server # [ 0.976331] msm_serial: driver initialized vm-test-run-wal2json> server # [ 0.977709] SuperH (H)SCI(F) driver initialized vm-test-run-wal2json> server # [ 0.978533] STM32 USART driver initialized vm-test-run-wal2json> server # [ 1.027419] loop: module loaded vm-test-run-wal2json> server # [ 1.028055] virtio_blk virtio5: 2/0/0 default/read/poll queues vm-test-run-wal2json> server # [ 1.032207] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-wal2json> server # [ 1.044872] megasas: 07.727.03.00-rc1 vm-test-run-wal2json> server # [ 1.050269] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] vm-test-run-wal2json> server # [ 1.053071] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.054025] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.055512] Using buffer write method vm-test-run-wal2json> server # [ 1.056482] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] vm-test-run-wal2json> server # [ 1.058579] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.058941] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.060168] Using buffer write method vm-test-run-wal2json> server # [ 1.060778] Concatenating MTD devices: vm-test-run-wal2json> server # [ 1.061016] (0): "0.flash" vm-test-run-wal2json> server # [ 1.061129] (1): "0.flash" vm-test-run-wal2json> server # [ 1.061689] into device "0.flash" vm-test-run-wal2json> server # [ 1.068600] Freeing initrd memory: 10684K vm-test-run-wal2json> server # [ 1.092490] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-wal2json> server # [ 1.106805] thunder_xcv, ver 1.0 vm-test-run-wal2json> server # [ 1.107079] thunder_bgx, ver 1.0 vm-test-run-wal2json> server # [ 1.107269] nicpf, ver 1.0 vm-test-run-wal2json> server # [ 1.110600] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version vm-test-run-wal2json> server # [ 1.110810] hns3: Copyright (c) 2017 Huawei Corporation. vm-test-run-wal2json> server # [ 1.111212] hclge is initializing vm-test-run-wal2json> server # [ 1.111762] e1000: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.111882] e1000: Copyright (c) 1999-2006 Intel Corporation. vm-test-run-wal2json> server # [ 1.112093] e1000e: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.112182] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. vm-test-run-wal2json> server # [ 1.112381] igb: Intel(R) Gigabit Ethernet Network Driver vm-test-run-wal2json> server # [ 1.112467] igb: Copyright (c) 2007-2014 Intel Corporation. vm-test-run-wal2json> server # [ 1.112678] igbvf: Intel(R) Gigabit Virtual Function Network Driver vm-test-run-wal2json> server # [ 1.112779] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. vm-test-run-wal2json> server # [ 1.114221] sky2: driver version 1.30 vm-test-run-wal2json> server # [ 1.123030] ehci-pci 0000:00:0a.0: EHCI Host Controller vm-test-run-wal2json> server # [ 1.123621] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 vm-test-run-wal2json> server # [ 1.125235] usbcore: registered new interface driver usb-storage vm-test-run-wal2json> server # [ 1.127079] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 vm-test-run-wal2json> server # [ 1.127911] usbcore: registered new interface driver usbserial_generic vm-test-run-wal2json> server # [ 1.128483] usbserial: USB Serial support registered for generic vm-test-run-wal2json> server # [ 1.137529] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 vm-test-run-wal2json> server # [ 1.139699] rtc-pl031 9010000.pl031: registered as rtc0 vm-test-run-wal2json> server # [ 1.140625] rtc-pl031 9010000.pl031: setting system clock to 2026-10-26T13:09:11 UTC (1793020151) vm-test-run-wal2json> server # [ 1.143481] i2c_dev: i2c /dev entries driver vm-test-run-wal2json> server # [ 1.146016] hub 1-0:1.0: USB hub found vm-test-run-wal2json> server # [ 1.146593] hub 1-0:1.0: 6 ports detected vm-test-run-wal2json> server # [ 1.159203] sdhci: Secure Digital Host Controller Interface driver vm-test-run-wal2json> server # [ 1.159362] sdhci: Copyright(c) Pierre Ossman vm-test-run-wal2json> server # [ 1.160729] Synopsys Designware Multimedia Card Interface Driver vm-test-run-wal2json> server # [ 1.162950] sdhci-pltfm: SDHCI platform and OF driver helper vm-test-run-wal2json> server # [ 1.169268] hid: raw HID events driver (C) Jiri Kosina vm-test-run-wal2json> server # [ 1.171602] usbcore: registered new interface driver usbhid vm-test-run-wal2json> server # [ 1.171923] usbhid: USB HID core driver vm-test-run-wal2json> server # [ 1.181106] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available vm-test-run-wal2json> server # [ 1.196170] drop_monitor: Initializing network drop monitor service vm-test-run-wal2json> server # [ 1.198194] NET: Registered PF_INET6 protocol family vm-test-run-wal2json> server # [ 1.216936] Segment Routing with IPv6 vm-test-run-wal2json> server # [ 1.217631] In-situ OAM (IOAM) with IPv6 vm-test-run-wal2json> server # [ 1.218569] NET: Registered PF_PACKET protocol family vm-test-run-wal2json> server # [ 1.220759] 9pnet: Installing 9P2000 support vm-test-run-wal2json> server # [ 1.225850] Key type dns_resolver registered vm-test-run-wal2json> server # [ 1.263671] registered taskstats version 1 vm-test-run-wal2json> server # [ 1.266487] Loading compiled-in X.509 certificates vm-test-run-wal2json> server # [ 1.324747] Demotion targets for Node 0: null vm-test-run-wal2json> server # [ 1.328164] Key type .fscrypt registered vm-test-run-wal2json> server # [ 1.328294] Key type fscrypt-provisioning registered vm-test-run-wal2json> server # [ 1.338785] input: gpio-keys as /devices/platform/gpio-keys/input/input0 vm-test-run-wal2json> server # [ 1.384090] clk: Disabling unused clocks vm-test-run-wal2json> server # [ 1.384436] PM: genpd: Disabling unused power domains vm-test-run-wal2json> server # [ 1.384754] ALSA device list: vm-test-run-wal2json> server # [ 1.385063] No soundcards found. vm-test-run-wal2json> server # [ 1.394359] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-wal2json> server # [ 1.472063] Freeing unused kernel memory: 4416K vm-test-run-wal2json> server # [ 1.475210] Run /init as init process vm-test-run-wal2json> server # [ 1.586833] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 vm-test-run-wal2json> server # [ 1.735486] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 vm-test-run-wal2json> server # [ 1.861871] usb 1-2: new high-speed USB device number 3 using ehci-pci vm-test-run-wal2json> server # [ 2.048963] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 vm-test-run-wal2json> server # [ 2.050218] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 vm-test-run-wal2json> server # [ 2.120928] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev vm-test-run-wal2json> server # [ 2.267946] [drm] pci: virtio-gpu-pci detected at 0000:00:09.0 vm-test-run-wal2json> server # [ 2.268623] [drm] features: -virgl +edid -resource_blob -host_visible vm-test-run-wal2json> server # [ 2.268649] [drm] features: -context_init vm-test-run-wal2json> server # [ 2.271468] [drm] number of scanouts: 1 vm-test-run-wal2json> server # [ 2.271611] [drm] number of cap sets: 0 vm-test-run-wal2json> server # [ 2.282775] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:09.0 on minor 0 vm-test-run-wal2json> server # [ 2.317983] Console: switching to colour frame buffer device 160x50 vm-test-run-wal2json> server # [ 2.331811] virtio-pci 0000:00:09.0: [drm] fb0: virtio_gpudrmfb frame buffer device vm-test-run-wal2json> server # [ 5.362445] EXT4-fs (vda): mounted filesystem d998f4ae-ad18-4831-be94-413903190ced r/w with ordered data mode. Quota mode: none. vm-test-run-wal2json> server # [ 7.971230] EXT4-fs (vda): re-mounted d998f4ae-ad18-4831-be94-413903190ced. vm-test-run-wal2json> server # [ 7.988892] booting system configuration /nix/store/j4gsgzj4fy9yqawqmf0pn2wmwcsvbzji-nixos-system-server-test vm-test-run-wal2json> server # [ 20.082911] systemd[1]: systemd 258.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) vm-test-run-wal2json> server # [ 20.093416] systemd[1]: Detected virtualization qemu. vm-test-run-wal2json> server # [ 20.099049] systemd[1]: Detected architecture arm64. vm-test-run-wal2json> server # [ 20.104161] systemd[1]: Detected first boot. vm-test-run-wal2json> server # [ 20.135704] systemd[1]: Initializing machine ID from random generator. vm-test-run-wal2json> server # [ 20.172482] systemd[1]: Hostname set to . vm-test-run-wal2json> server # [ 21.408237] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-wal2json> server # [ 22.778174] NET: Registered PF_VSOCK protocol family vm-test-run-wal2json> server # [ 22.834871] Guest personality initialized and is inactive vm-test-run-wal2json> server # [ 22.843841] VMCI host device registered (name=vmci, major=10, minor=261) vm-test-run-wal2json> server # [ 22.847410] Initialized host personality vm-test-run-wal2json> server # [ 23.088151] systemd[1]: Applying preset policy. vm-test-run-wal2json> server # [ 26.659766] systemd[1]: Populated /etc with preset unit settings. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 30.326037] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-wal2json> server # [ 30.546899] systemd[1]: Created slice Slice /system/getty. vm-test-run-wal2json> server # [ 30.563390] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-wal2json> server # [ 30.576223] systemd[1]: Created slice User and Session Slice. vm-test-run-wal2json> server # [ 30.585073] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-wal2json> server # [ 30.590519] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-wal2json> server # [ 30.596516] systemd[1]: Expecting device /dev/hvc0... vm-test-run-wal2json> server # [ 30.602054] systemd[1]: Expecting device /dev/ttyAMA0... vm-test-run-wal2json> server # [ 30.606547] systemd[1]: Expecting device /sys/subsystem/net/devices/eth1... vm-test-run-wal2json> server # [ 30.610833] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-wal2json> server # [ 30.615887] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-wal2json> server # [ 30.620699] systemd[1]: Reached target Path Units. vm-test-run-wal2json> server # [ 30.625468] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 30.631527] systemd[1]: Reached target Slice Units. vm-test-run-wal2json> server # [ 30.637035] systemd[1]: Reached target Swaps. vm-test-run-wal2json> server # [ 30.673563] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-wal2json> server # [ 30.696552] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-wal2json> server # [ 30.708251] systemd[1]: Listening on Journal Audit Socket. vm-test-run-wal2json> server # [ 30.715495] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-wal2json> server # [ 30.721223] systemd[1]: Listening on Journal Sockets. vm-test-run-wal2json> server # [ 30.730831] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-wal2json> server # [ 30.735128] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 30.742910] systemd[1]: Listening on udev Control Socket. vm-test-run-wal2json> server # [ 30.748319] systemd[1]: Listening on udev Kernel Socket. vm-test-run-wal2json> server # [ 30.800832] systemd[1]: Mounting Huge Pages File System... vm-test-run-wal2json> server # [ 30.842775] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-wal2json> server # [ 30.895807] systemd[1]: Mounting Kernel Debug File System... vm-test-run-wal2json> server # [ 30.954038] systemd[1]: Mounting Kernel Trace File System... vm-test-run-wal2json> server # [ 31.048862] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-wal2json> server # [ 31.172255] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-wal2json> server # [ 31.193409] systemd[1]: Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs). vm-test-run-wal2json> server # [ 31.355844] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-wal2json> server # [ 31.382311] systemd[1]: Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm). vm-test-run-wal2json> server # [ 31.398560] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 31.516738] systemd[1]: Starting Load Kernel Module fuse... vm-test-run-wal2json> server # [ 31.534945] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 31.552934] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 31.639991] systemd[1]: Starting Journal Service... vm-test-run-wal2json> server # [ 31.733090] systemd[1]: Starting Load Kernel Modules... vm-test-run-wal2json> server # [ 31.854816] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-wal2json> server # [ 31.918096] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-wal2json> server # [ 31.924397] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 31.996874] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-wal2json> server # [ 32.070193] systemd[1]: Mounted Huge Pages File System. vm-test-run-wal2json> server # [ 32.084565] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-wal2json> server # [ 32.094423] systemd[1]: Mounted Kernel Debug File System. vm-test-run-wal2json> server # [ 32.104897] systemd[1]: Mounted Kernel Trace File System. vm-test-run-wal2json> server # [ 32.130554] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-wal2json> server # [ 32.155097] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-wal2json> server # [ 32.211820] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-wal2json> server # [ 32.985432] systemd[1]: Finished Load Kernel Modules. vm-test-run-wal2json> server # [ 33.010542] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-wal2json> server # [ 33.026078] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-wal2json> server # [ 33.116214] systemd[1]: Starting Firewall... vm-test-run-wal2json> server # [ 33.163316] systemd[1]: Starting Apply Kernel Variables... vm-test-run-wal2json> server # [ 33.372103] EXT4-fs (vda): re-mounted d998f4ae-ad18-4831-be94-413903190ced. vm-test-run-wal2json> server # [ 33.387807] fuse: init (API version 7.41) vm-test-run-wal2json> server # [ 33.502808] systemd[1]: modprobe@fuse.service: Deactivated successfully. vm-test-run-wal2json> server # [ 33.523866] systemd[1]: Finished Load Kernel Module fuse. vm-test-run-wal2json> server # [ 33.540975] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-wal2json> server # [ 33.587206] systemd[1]: Mounting FUSE Control File System... vm-test-run-wal2json> server # [ 33.596027] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 33.704832] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-wal2json> server # [ 33.726716] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 33.772319] systemd-journald[397]: Collecting audit messages is enabled. vm-test-run-wal2json> server # [ 33.904252] systemd[1]: Mounted FUSE Control File System. vm-test-run-wal2json> server # [ 34.791347] systemd[1]: Finished Apply Kernel Variables. vm-test-run-wal2json> server # [ 34.844422] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-wal2json> server # [ 34.881058] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-wal2json> server # [ 34.890157] systemd[1]: Reached target First Boot Complete. vm-test-run-wal2json> server # [ 34.959865] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-wal2json> server # [ 35.074864] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-wal2json> server # [ 35.981124] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-wal2json> server # [ 36.009077] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-wal2json> server # [ 36.059715] systemd[1]: Mounting /run/wrappers... vm-test-run-wal2json> server # [ 36.106323] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-wal2json> server # [ 36.576808] systemd[1]: Mounted /run/wrappers. vm-test-run-wal2json> server # [ 36.586672] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 36.624422] systemd[1]: Listening on Boot Entries Service Socket. vm-test-run-wal2json> server # [ 36.675281] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 36.681940] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 36.741731] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-wal2json> server # [ 36.964202] systemd[1]: Started Journal Service. vm-test-run-wal2json> server # [ 36.897922] systemd-modules-load[398]: Module 'atkbd' is built in vm-test-run-wal2json> server # [ 36.921704] systemd-modules-load[398]: Module 'loop' is built in vm-test-run-wal2json> server # [ 37.027942] systemd-oomd[399]: No swap; memory pressure usage will be degraded vm-test-run-wal2json> server # [ 37.079410] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-wal2json> server # [ 37.654314] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-wal2json> server # [ 37.743322] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-wal2json> server # [ 37.940226] systemd-udevd[426]: Using default interface naming scheme 'v258'. vm-test-run-wal2json> server # [ 38.056260] systemd-journald[397]: Received client request to flush runtime journal. vm-test-run-wal2json> server # [ 38.554709] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-wal2json> server # [ 38.606410] systemd[1]: Starting Create System Files and Directories... vm-test-run-wal2json> server # [ 40.453678] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-wal2json> server # [ 40.772393] systemd[1]: Finished Create System Files and Directories. vm-test-run-wal2json> server # [ 40.908328] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-wal2json> server # [ 40.982297] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-wal2json> server # [ 42.102785] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-wal2json> server # [ 42.969554] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-wal2json> server # [ 43.039211] systemd[1]: Starting Update is Completed... vm-test-run-wal2json> server # [ 43.854223] systemd[1]: Finished Update is Completed. vm-test-run-wal2json> server # [ 46.738297] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 46.745925] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 46.749598] systemd[1]: suid-sgid-wrappers.service: Consumed 2.777s CPU time, 5.6M memory peak. vm-test-run-wal2json> server # [ 49.271521] systemd[1]: Finished Firewall. vm-test-run-wal2json> server # [ 50.991867] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-wal2json> server # [ 51.006176] systemd[1]: Reached target System Initialization. vm-test-run-wal2json> server # [ 51.013503] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-wal2json> server # [ 51.018374] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-wal2json> server # [ 51.029344] systemd[1]: Reached target Timer Units. vm-test-run-wal2json> server # [ 51.036026] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-wal2json> server # [ 51.042454] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-wal2json> server # [ 51.054385] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-wal2json> server # [ 51.106534] systemd[1]: Starting OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK)... vm-test-run-wal2json> server # [ 51.110638] systemd[1]: Listening on Hostname Service Socket. vm-test-run-wal2json> server # [ 51.254079] (sh-issue)[630]: sshd-vsock.socket: Unable to locate executable '/usr/lib/systemd/systemd-ssh-issue': No such file or directory vm-test-run-wal2json> server # [ 51.300726] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK). vm-test-run-wal2json> server # [ 51.302699] systemd[1]: Reached target Socket Units. vm-test-run-wal2json> server # [ 51.313901] systemd[1]: Reached target Basic System. vm-test-run-wal2json> server # [ 51.345423] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-wal2json> server # [ 51.377385] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-wal2json> server # [ 51.419871] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 51.476684] systemd[1]: Started Reset console on configuration changes. vm-test-run-wal2json> server # [ 51.547276] systemd[1]: Starting resolvconf update... vm-test-run-wal2json> server # [ 51.621854] systemd[1]: Starting SSH Host Keys Generation... vm-test-run-wal2json> server # [ 52.967768] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-wal2json> server # [ 53.054704] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 53.062666] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 53.103511] nsncd[634]: Oct 26 13:10:03.462 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 53.124434] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 53.157121] systemd[1]: Starting User Login Management... vm-test-run-wal2json> server # [ 53.255811] dbus-daemon[632]: dbus[632]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 53.758381] systemd[1]: Started D-Bus System Message Bus. vm-test-run-wal2json> server # [ 55.122485] systemd-logind[660]: New seat seat0. vm-test-run-wal2json> server # [ 55.178333] systemd[1]: Started User Login Management. vm-test-run-wal2json> server # [ 55.186887] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 55.192405] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-wal2json> server # [ 55.197242] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-wal2json> server # [ 55.198841] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-wal2json> server # [ 55.253484] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 55.255355] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 55.371387] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-wal2json> server # [ 55.400050] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 55.516593] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 56.065634] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 56.071507] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 56.447581] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 56.464090] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 56.476820] nsncd[709]: Oct 26 13:10:06.904 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 56.491457] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 56.843163] systemd[1]: Finished resolvconf update. vm-test-run-wal2json> server # [ 56.854927] systemd[1]: Reached target Preparation for Network. vm-test-run-wal2json> server # [ 56.904094] systemd[1]: Starting DHCP Client... vm-test-run-wal2json> server # [ 58.543114] dhcpcd[751]: dhcpcd-10.2.4 starting vm-test-run-wal2json> server # [ 58.666405] dhcpcd[769]: dev: loaded udev vm-test-run-wal2json> server # [ 59.045452] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 59.484545] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-wal2json> server # [ 59.744168] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-wal2json> server # [ 59.752152] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-wal2json> server # [ 59.780663] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 vm-test-run-wal2json> server # [ 59.794594] cfg80211: failed to load regulatory.db vm-test-run-wal2json> server # [ 60.836905] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-wal2json> server # [ 60.770372] dhcpcd[769]: eth0: waiting for carrier vm-test-run-wal2json> server # [ 60.773391] dhcpcd[769]: eth0: carrier acquired vm-test-run-wal2json> server # [ 60.877755] dhcpcd[769]: DUID 00:01:00:01:32:72:0d:b3:52:54:00:12:34:56 vm-test-run-wal2json> server # [ 60.879426] dhcpcd[769]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 60.881769] dhcpcd[769]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-wal2json> server # [ 61.302811] sshd-keygen-start[661]: Generating public/private rsa key pair. vm-test-run-wal2json> server # [ 61.306197] sshd-keygen-start[661]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key vm-test-run-wal2json> server # [ 61.309836] sshd-keygen-start[661]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub vm-test-run-wal2json> server # [ 61.313596] sshd-keygen-start[661]: The key fingerprint is: vm-test-run-wal2json> server # [ 61.314550] sshd-keygen-start[661]: SHA256:f1EtmIfclpOaQ/PNkQCqs+jeuqU9auJgY4gPp4wCJAA root@server vm-test-run-wal2json> server # [ 61.315401] sshd-keygen-start[661]: The key's randomart image is: vm-test-run-wal2json> server # [ 61.322309] sshd-keygen-start[661]: +---[RSA 4096]----+ vm-test-run-wal2json> server # [ 61.327950] sshd-keygen-start[661]: |E ... | vm-test-run-wal2json> server # [ 61.333607] sshd-keygen-start[661]: |. .. =.+.| vm-test-run-wal2json> server # [ 61.338330] sshd-keygen-start[661]: |. . B Xo.| vm-test-run-wal2json> server # [ 61.346499] sshd-keygen-start[661]: |.. . . O =.| vm-test-run-wal2json> server # [ 61.349825] sshd-keygen-start[661]: |o oS = . o| vm-test-run-wal2json> server # [ 61.356729] sshd-keygen-start[661]: |+ . o. o | vm-test-run-wal2json> server # [ 61.365153] sshd-keygen-start[661]: |==. . o . . | vm-test-run-wal2json> server # [ 61.366311] sshd-keygen-start[661]: |*=o...=. . | vm-test-run-wal2json> server # [ 61.373299] sshd-keygen-start[661]: |+.o.+B+o. | vm-test-run-wal2json> server # [ 61.374654] sshd-keygen-start[661]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 61.378149] dhcpcd[769]: eth0: soliciting a DHCP lease vm-test-run-wal2json> server # [ 61.383934] dhcpcd[769]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-wal2json> server # [ 61.407347] dhcpcd[769]: eth0: probing address 10.0.2.15/24 vm-test-run-wal2json> server # [ 61.814901] sshd-keygen-start[812]: Generating public/private ed25519 key pair. vm-test-run-wal2json> server # [ 61.822847] sshd-keygen-start[812]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key vm-test-run-wal2json> server # [ 61.827735] sshd-keygen-start[812]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub vm-test-run-wal2json> server # [ 61.831851] sshd-keygen-start[812]: The key fingerprint is: vm-test-run-wal2json> server # [ 61.835554] sshd-keygen-start[812]: SHA256:wb0qIAO8YQETsDfAfjPvw9pf2aEh4FgYTEn6ljplfEo root@server vm-test-run-wal2json> server # [ 61.857888] sshd-keygen-start[812]: The key's randomart image is: vm-test-run-wal2json> server # [ 61.862654] sshd-keygen-start[812]: +--[ED25519 256]--+ vm-test-run-wal2json> server # [ 61.866100] sshd-keygen-start[812]: |Xo++. | vm-test-run-wal2json> server # [ 61.882592] sshd-keygen-start[812]: |.=ooo . . | vm-test-run-wal2json> server # [ 61.889977] sshd-keygen-start[812]: |+=o. o o . | vm-test-run-wal2json> server # [ 61.897783] sshd-keygen-start[812]: |.+=== . . . | vm-test-run-wal2json> server # [ 61.898698] sshd-keygen-start[812]: | .+E=o .S... | vm-test-run-wal2json> server # [ 61.899651] sshd-keygen-start[812]: | *ooo ..= . | vm-test-run-wal2json> server # [ 61.900100] sshd-keygen-start[812]: | o .o . .+ . | vm-test-run-wal2json> server # [ 61.900578] sshd-keygen-start[812]: | . .+ .. | vm-test-run-wal2json> server # [ 61.907615] sshd-keygen-start[812]: | ...o. | vm-test-run-wal2json> server # [ 61.908662] sshd-keygen-start[812]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 61.914246] systemd[1]: sshd-keygen.service: Deactivated successfully. vm-test-run-wal2json> server # [ 61.916153] systemd[1]: Finished SSH Host Keys Generation. vm-test-run-wal2json> server # [ 61.919126] systemd[1]: sshd-keygen.service: Consumed 5.024s CPU time, 2.9M memory peak. vm-test-run-wal2json> server # [ 62.439523] systemd[1]: Found device /dev/hvc0. vm-test-run-wal2json> server # [ 62.574832] dhcpcd[769]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 62.577592] dhcpcd[769]: eth0: Router Advertisement from fe80::2 vm-test-run-wal2json> server # [ 62.580120] dhcpcd[769]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-wal2json> server # [ 62.585801] dhcpcd[769]: eth0: adding route to fec0::/64 vm-test-run-wal2json> server # [ 62.587945] dhcpcd[769]: eth0: adding default route via fe80::2 vm-test-run-wal2json> server # [ 63.799596] systemd[1]: Found device /dev/ttyAMA0. vm-test-run-wal2json> server # [ 63.831431] systemd[1]: Started backdoor.service. vm-test-run-wal2json> server # connecting to host... vm-test-run-wal2json> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-wal2json> server: connected to guest root shell vm-test-run-wal2json> server: (connecting took 65.73 seconds) vm-test-run-wal2json> server: (finished: waiting for the VM to finish booting, in 65.73 seconds) vm-test-run-wal2json> server # [ 65.016955] (udev-worker)[815]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 65.151474] (udev-worker)[818]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-wal2json> server # [ 65.160403] (udev-worker)[818]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 66.351090] systemd[1]: Found device Virtio network device. vm-test-run-wal2json> server # [ 66.395796] systemd[1]: Starting Address configuration of eth1... vm-test-run-wal2json> server # [ 66.474678] dhcpcd[769]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 66.535709] dhcpcd[769]: eth0: soliciting a DHCP lease vm-test-run-wal2json> server # [ 66.540047] dhcpcd[769]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-wal2json> server # [ 66.545515] dhcpcd[769]: eth0: probing address 10.0.2.15/24 vm-test-run-wal2json> server # [ 66.546830] dhcpcd[769]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 66.552219] dhcpcd[769]: eth0: adding route to 10.0.2.0/24 vm-test-run-wal2json> server # [ 66.556090] dhcpcd[769]: eth0: adding default route via 10.0.2.2 vm-test-run-wal2json> server # [ 67.358982] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-wal2json> server # [ 67.490242] network-addresses-eth1-start[857]: adding address 192.168.1.1/24... done vm-test-run-wal2json> server # [ 67.706308] network-addresses-eth1-start[857]: adding address 2001:db8:1::1/64... done vm-test-run-wal2json> server # [ 68.019833] systemd[1]: Finished Address configuration of eth1. vm-test-run-wal2json> server # [ 68.068164] systemd[1]: Starting Networking Setup... vm-test-run-wal2json> server # [ 69.818593] dhcpcd[769]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 69.867184] systemd[1]: Started DHCP Client. vm-test-run-wal2json> server # [ 72.027809] systemd[1]: Finished Networking Setup. vm-test-run-wal2json> server # [ 72.031367] systemd[1]: Reached target Network. vm-test-run-wal2json> server # [ 72.107583] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 72.165108] systemd[1]: Starting SSH Daemon... vm-test-run-wal2json> server # [ 72.241568] systemd[1]: Starting Permit User Sessions... vm-test-run-wal2json> server # [ 72.868103] systemd[1]: Finished Permit User Sessions. vm-test-run-wal2json> server # [ 72.942717] systemd[1]: Started Getty on tty1. vm-test-run-wal2json> server # [ 72.981840] systemd[1]: Reached target Login Prompts. vm-test-run-wal2json> server # [ 73.135145] sshd[1012]: Server listening on 0.0.0.0 port 22. vm-test-run-wal2json> server # [ 73.180879] sshd[1012]: Server listening on :: port 22. vm-test-run-wal2json> server # [ 73.203021] systemd[1]: Started SSH Daemon. vm-test-run-wal2json> server # [ 75.538841] postgresql-pre-start[1030]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 75.561539] postgresql-pre-start[1030]: This user must also own the server process. vm-test-run-wal2json> server # [ 75.658818] postgresql-pre-start[1030]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 75.660118] postgresql-pre-start[1030]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 75.685159] postgresql-pre-start[1030]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 75.690865] postgresql-pre-start[1030]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 75.696013] postgresql-pre-start[1030]: fixing permissions on existing directory /var/lib/postgresql/15 ... ok vm-test-run-wal2json> server # [ 75.709883] postgresql-pre-start[1030]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 75.710920] postgresql-pre-start[1030]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 76.383020] systemd-logind[660]: Watching system buttons on /dev/input/event0 (gpio-keys) vm-test-run-wal2json> server # [ 76.459870] postgresql-pre-start[1030]: selecting default max_connections ... 100 vm-test-run-wal2json> server # [ 77.184188] postgresql-pre-start[1030]: selecting default shared_buffers ... 128MB vm-test-run-wal2json> server # [ 83.585430] mousedev: PS/2 mouse device common for all mice vm-test-run-wal2json> server # [ 86.475411] systemd-logind[660]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) vm-test-run-wal2json> server # [ 88.486911] postgresql-pre-start[1030]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 88.517642] postgresql-pre-start[1030]: creating configuration files ... ok vm-test-run-wal2json> server # [ 92.532239] postgresql-pre-start[1030]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 104.111293] postgresql-pre-start[1030]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 106.803677] postgresql-pre-start[1030]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 106.806155] postgresql-pre-start[1030]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 106.809743] postgresql-pre-start[1030]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 106.813201] postgresql-pre-start[1030]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 106.817364] postgresql-pre-start[1030]: /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/bin/pg_ctl -D /var/lib/postgresql/15 -l logfile start vm-test-run-wal2json> server # [ 109.006240] postgres[1383]: [1383] LOG: starting PostgreSQL 15.19 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 109.021590] postgres[1383]: [1383] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 109.023655] postgres[1383]: [1383] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 109.026130] postgres[1383]: [1383] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 109.177364] postgres[1402]: [1402] LOG: database system was shut down at 2026-10-26 13:10:54 GMT vm-test-run-wal2json> server # [ 109.369439] postgres[1383]: [1383] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 109.472491] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 109.520551] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 111.509618] postgresql-setup-start[1437]: CREATE ROLE vm-test-run-wal2json> server # [ 111.675275] postgresql-setup-start[1439]: ALTER ROLE vm-test-run-wal2json> server # [ 111.746296] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 111.760777] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 111.774531] systemd[1]: Reached target Multi-User System. vm-test-run-wal2json> server # [ 111.779603] systemd[1]: Startup finished in 19.256s (kernel) + 1min 32.521s (userspace) = 1min 51.777s. vm-test-run-wal2json> server: (finished: waiting for unit multi-user.target, in 114.05 seconds) vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 0.96 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.45 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 15 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.51 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.84 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.52 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 15, in 1.87 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 15 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" vm-test-run-wal2json> server # [ 117.011612] sudo[1506]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 wal2json vm-test-run-wal2json> server # [ 117.165597] sudo[1506]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # pg_regress: could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 117.794185] postgres[1513]: [1513] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 117.795343] postgres[1513]: [1513] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 117.795965] postgres[1513]: [1513] STATEMENT: select vm-test-run-wal2json> server # [ 117.798188] postgres[1513]: 1 vm-test-run-wal2json> server # [ 117.798983] postgres[1513]: from vm-test-run-wal2json> server # [ 117.801837] postgres[1513]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 117.910516] postgres[1513]: [1513] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 117.921908] postgres[1513]: [1513] DETAIL: Streaming transactions committing after 0/152AC80, reading WAL from 0/152AC48. vm-test-run-wal2json> server # [ 117.924414] postgres[1513]: [1513] STATEMENT: select vm-test-run-wal2json> server # [ 117.930294] postgres[1513]: data vm-test-run-wal2json> server # [ 117.931242] postgres[1513]: from vm-test-run-wal2json> server # [ 117.931618] postgres[1513]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 117.947509] postgres[1513]: 'reg_test', vm-test-run-wal2json> server # [ 117.950621] postgres[1513]: null, vm-test-run-wal2json> server # [ 117.960889] postgres[1513]: null, vm-test-run-wal2json> server # [ 117.961721] postgres[1513]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 117.962483] postgres[1513]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 117.975094] postgres[1513]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 117.977348] postgres[1513]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 117.979337] postgres[1513]: 'format-version', '2', vm-test-run-wal2json> server # [ 117.986912] postgres[1513]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 117.993904] postgres[1513]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 117.995016] postgres[1513]: ) x; vm-test-run-wal2json> server # [ 118.003539] postgres[1513]: [1513] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 118.005258] postgres[1513]: [1513] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 118.006165] postgres[1513]: [1513] STATEMENT: select vm-test-run-wal2json> server # [ 118.007003] postgres[1513]: data vm-test-run-wal2json> server # [ 118.007365] postgres[1513]: from vm-test-run-wal2json> server # [ 118.008042] postgres[1513]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 118.010073] postgres[1513]: 'reg_test', vm-test-run-wal2json> server # [ 118.011275] postgres[1513]: null, vm-test-run-wal2json> server # [ 118.012066] postgres[1513]: null, vm-test-run-wal2json> server # [ 118.014195] postgres[1513]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 118.015813] postgres[1513]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 118.020468] postgres[1513]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 118.021695] postgres[1513]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 118.022255] postgres[1513]: 'format-version', '2', vm-test-run-wal2json> server # [ 118.022746] postgres[1513]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 118.024447] postgres[1513]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 118.025810] postgres[1513]: ) x; vm-test-run-wal2json> server # [ 118.586279] sudo[1506]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" , in 2.41 seconds) vm-test-run-wal2json> (using postmaster on Unix socket, default port) vm-test-run-wal2json> ============== running regression test queries ============== vm-test-run-wal2json> test wal2json ... ok 941 ms vm-test-run-wal2json> vm-test-run-wal2json> ===================== vm-test-run-wal2json> All 1 tests passed. vm-test-run-wal2json> ===================== vm-test-run-wal2json> vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 15 after extension upgrade, in 2.41 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.48 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.45 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.44 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.37 seconds) vm-test-run-wal2json> subtest: switch to postgresql 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 127.873342] nixos[1552]: switching to system configuration /nix/store/sxd6kadjcgrv4ya7j21ygamx4w1imjyv-nixos-system-server-test vm-test-run-wal2json> server # [ 127.906970] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 127.929114] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 127.962714] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 127.978432] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 127.985086] postgres[1383]: [1383] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 128.004976] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 128.006940] postgres[1383]: [1383] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 128.007591] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 128.072354] postgres[1383]: [1383] LOG: background worker "logical replication launcher" (PID 1408) exited with exit code 1 vm-test-run-wal2json> server # [ 128.103858] postgres[1400]: [1400] LOG: shutting down vm-test-run-wal2json> server # [ 128.117900] postgres[1400]: [1400] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 128.299664] postgres[1400]: [1400] LOG: checkpoint complete: wrote 54 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.063 s, sync=0.064 s, total=0.201 s; sync files=48, longest=0.015 s, average=0.002 s; distance=149 kB, estimate=149 kB vm-test-run-wal2json> server # [ 128.346769] postgres[1383]: [1383] LOG: database system is shut down vm-test-run-wal2json> server # [ 128.415418] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 128.417701] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 128.425822] systemd[1]: postgresql.service: Consumed 19.270s CPU time, 91.3M memory peak, 45.9M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 132.076029] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:08.0/virtio7/input/input3 vm-test-run-wal2json> server # [ 134.826343] systemd[1]: Reload requested from client PID 1552 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 134.830133] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 140.362632] systemd[1]: Reloading finished in 5516 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 140.823462] systemd[1]: Starting Re-setup tmpfiles on a system that is already running.... vm-test-run-wal2json> server # [ 142.163772] systemd[1]: Finished Re-setup tmpfiles on a system that is already running.. vm-test-run-wal2json> server # [ 142.213418] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 142.289766] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 142.782543] dbus-daemon[632]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 142.977730] dbus-daemon[632]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 142.990106] dbus-send[1733]: method return time=1793020293.434435 sender=org.freedesktop.DBus -> destination=:1.5 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 143.018203] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # [ 143.185916] dbus-daemon[632]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 143.389917] dbus-daemon[632]: [system] Reloaded configuration vm-test-run-wal2json> server # starting the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 143.526740] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 143.529955] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 143.623327] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 143.703156] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 143.774537] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 143.917376] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 143.919279] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 144.053483] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 144.099925] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 144.103249] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 144.112130] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 144.122185] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 144.123766] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 144.139572] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 144.397866] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 144.405641] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 145.905935] postgresql-migrate-start[1762]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 145.916135] postgresql-migrate-start[1762]: This user must also own the server process. vm-test-run-wal2json> server # [ 146.007649] postgresql-migrate-start[1762]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 146.012125] postgresql-migrate-start[1762]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 146.018566] postgresql-migrate-start[1762]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 146.019954] postgresql-migrate-start[1762]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 146.024323] postgresql-migrate-start[1762]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 146.034911] postgresql-migrate-start[1762]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 146.039978] postgresql-migrate-start[1762]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 147.249801] postgresql-migrate-start[1762]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 148.002462] postgresql-migrate-start[1762]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 150.868697] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 150.888161] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 150.914840] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 150.916539] systemd[1]: suid-sgid-wrappers.service: Consumed 2.588s CPU time, 3.2M memory peak. vm-test-run-wal2json> server # [ 151.214767] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 151.238892] systemd[1]: Stopped Virtual Console Setup. vm-test-run-wal2json> server # [ 151.305233] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 156.379228] systemd[1]: Finished Virtual Console Setup. vm-test-run-wal2json> server # [ 156.517956] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-wal2json> server # [ 158.725948] postgresql-migrate-start[1762]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 158.778156] postgresql-migrate-start[1762]: creating configuration files ... ok vm-test-run-wal2json> server # [ 159.337298] systemd-logind[660]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-wal2json> server # [ 161.117414] postgresql-migrate-start[1762]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 165.698706] postgresql-migrate-start[1762]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 166.644495] postgresql-migrate-start[1762]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 166.645323] postgresql-migrate-start[1762]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 166.645861] postgresql-migrate-start[1762]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 166.646191] postgresql-migrate-start[1762]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 166.646468] postgresql-migrate-start[1762]: /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 169.019955] postgresql-migrate-start[1930]: Performing Consistency Checks vm-test-run-wal2json> server # [ 169.023528] postgresql-migrate-start[1930]: ----------------------------- vm-test-run-wal2json> server # [ 169.027163] postgresql-migrate-start[1930]: Checking cluster versions ok vm-test-run-wal2json> server # [ 170.937898] postgresql-migrate-start[1930]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 170.990893] postgresql-migrate-start[1930]: Checking database connection settings ok vm-test-run-wal2json> server # [ 171.067500] postgresql-migrate-start[1930]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 171.070155] postgresql-migrate-start[1930]: Checking for contrib/isn with bigint-passing mismatch ok vm-test-run-wal2json> server # [ 171.619102] postgresql-migrate-start[1930]: Checking data type usage ok vm-test-run-wal2json> server # [ 171.766594] postgresql-migrate-start[1930]: Checking for not-null constraint inconsistencies ok vm-test-run-wal2json> server # [ 172.278190] postgresql-migrate-start[1930]: Creating dump of global objects ok vm-test-run-wal2json> server # [ 173.960660] postgresql-migrate-start[1930]: Creating dump of database schemas ok vm-test-run-wal2json> server # [ 175.804364] postgresql-migrate-start[1930]: Checking for presence of required libraries ok vm-test-run-wal2json> server # [ 175.864675] postgresql-migrate-start[1930]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 175.923750] postgresql-migrate-start[1930]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 175.926992] postgresql-migrate-start[1930]: Checking for new cluster tablespace directories ok vm-test-run-wal2json> server # [ 175.933786] postgresql-migrate-start[1930]: If pg_upgrade fails after this point, you must re-initdb the vm-test-run-wal2json> server # [ 175.934959] postgresql-migrate-start[1930]: new cluster before continuing. vm-test-run-wal2json> server # [ 175.935339] postgresql-migrate-start[1930]: Performing Upgrade vm-test-run-wal2json> server # [ 175.935634] postgresql-migrate-start[1930]: ------------------ vm-test-run-wal2json> server # [ 175.971833] postgresql-migrate-start[1930]: Setting locale and encoding for new cluster ok vm-test-run-wal2json> server # [ 177.827075] postgresql-migrate-start[1930]: Analyzing all rows in the new cluster ok vm-test-run-wal2json> server # [ 178.579696] postgresql-migrate-start[1930]: Freezing all rows in the new cluster ok vm-test-run-wal2json> server # [ 178.853697] postgresql-migrate-start[1930]: Deleting files from new pg_xact ok vm-test-run-wal2json> server # [ 178.971146] postgresql-migrate-start[1930]: Copying old pg_xact to new server ok vm-test-run-wal2json> server # [ 179.254600] postgresql-migrate-start[1930]: Setting oldest XID for new cluster ok vm-test-run-wal2json> server # [ 180.070120] postgresql-migrate-start[1930]: Setting next transaction ID and epoch for new cluster ok vm-test-run-wal2json> server # [ 180.072496] postgresql-migrate-start[1930]: Deleting files from new pg_multixact/offsets ok vm-test-run-wal2json> server # [ 180.181781] postgresql-migrate-start[1930]: Copying old pg_multixact/offsets to new server ok vm-test-run-wal2json> server # [ 180.183348] postgresql-migrate-start[1930]: Deleting files from new pg_multixact/members ok vm-test-run-wal2json> server # [ 180.298713] postgresql-migrate-start[1930]: Copying old pg_multixact/members to new server ok vm-test-run-wal2json> server # [ 180.564631] postgresql-migrate-start[1930]: Setting next multixact ID and offset for new cluster ok vm-test-run-wal2json> server # [ 180.831306] postgresql-migrate-start[1930]: Resetting WAL archives ok vm-test-run-wal2json> server # [ 182.103329] postgresql-migrate-start[1930]: Setting frozenxid and minmxid counters in new cluster ok vm-test-run-wal2json> server # [ 182.408046] postgresql-migrate-start[1930]: Restoring global objects in the new cluster ok vm-test-run-wal2json> server # [ 183.995188] postgresql-migrate-start[1930]: Restoring database schemas in the new cluster ok vm-test-run-wal2json> server # [ 184.553459] postgresql-migrate-start[1930]: Copying user relation files ok vm-test-run-wal2json> server # [ 184.851127] postgresql-migrate-start[1930]: Setting next OID for new cluster ok vm-test-run-wal2json> server # [ 186.246615] postgresql-migrate-start[1930]: Sync data directory to disk ok vm-test-run-wal2json> server # [ 186.250123] postgresql-migrate-start[1930]: Creating script to delete old cluster ok vm-test-run-wal2json> server # [ 187.874430] postgresql-migrate-start[1930]: Checking for extension updates ok vm-test-run-wal2json> server # [ 188.105132] postgresql-migrate-start[1930]: Upgrade Complete vm-test-run-wal2json> server # [ 188.107100] postgresql-migrate-start[1930]: ---------------- vm-test-run-wal2json> server # [ 188.108016] postgresql-migrate-start[1930]: Optimizer statistics are not transferred by pg_upgrade. vm-test-run-wal2json> server # [ 188.109692] postgresql-migrate-start[1930]: Once you start the new server, consider running: vm-test-run-wal2json> server # [ 188.110619] postgresql-migrate-start[1930]: /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/bin/vacuumdb --all --analyze-in-stages vm-test-run-wal2json> server # [ 188.111848] postgresql-migrate-start[1930]: Running this script will delete the old cluster's data files: vm-test-run-wal2json> server # [ 188.114364] postgresql-migrate-start[1930]: ./delete_old_cluster.sh vm-test-run-wal2json> server # [ 188.153267] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 188.193555] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 189.315836] postgres[2090]: [2090] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 189.319827] postgres[2090]: [2090] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 189.325109] postgres[2090]: [2090] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 189.331785] postgres[2090]: [2090] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 189.391389] postgres[2096]: [2096] LOG: database system was shut down at 2026-10-26 13:12:18 GMT vm-test-run-wal2json> server # [ 189.463209] postgres[2090]: [2090] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 189.506744] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 189.529375] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 190.266417] postgresql-setup-start[2106]: ALTER ROLE vm-test-run-wal2json> server # [ 190.311497] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 190.325860] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # the following new units were started: postgresql-migrate.service, sys-devices-platform-4010000000.pcie-pci0000:00-0000:00:0b.0-virtio9-virtio\x2dports-vport9p0.device, sys-devices-virtual-input-mice.device, sys-devices-virtual-misc-rfkill.device, sys-devices-virtual-misc-tun.device, sys-devices-virtual-mtd-mtd0ro.device, sysinit-reactivation.target, systemd-rfkill.socket, systemd-tmpfiles-resetup.service, systemd-vconsole-setup.service vm-test-run-wal2json> server # [ 190.623876] nixos[1552]: finished switching to system configuration /nix/store/sxd6kadjcgrv4ya7j21ygamx4w1imjyv-nixos-system-server-test vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 0.65 seconds) vm-test-run-wal2json> server: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no' vm-test-run-wal2json> server: (finished: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no', in 0.13 seconds) vm-test-run-wal2json> (finished: subtest: switch to postgresql 17, in 71.42 seconds) vm-test-run-wal2json> subtest: Check last version of the extension after postgresql upgrade vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.30 seconds) vm-test-run-wal2json> (finished: subtest: Check last version of the extension after postgresql upgrade, in 0.30 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.30 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.33 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.29 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 17, in 0.91 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 193.013066] sudo[2132]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 193.132951] sudo[2132]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 193.603540] postgres[2139]: [2139] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 193.606646] postgres[2139]: [2139] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 193.607190] postgres[2139]: [2139] STATEMENT: select vm-test-run-wal2json> server # [ 193.607498] postgres[2139]: 1 vm-test-run-wal2json> server # [ 193.608035] postgres[2139]: from vm-test-run-wal2json> server # [ 193.610229] postgres[2139]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 193.644116] postgres[2139]: [2139] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 193.646641] postgres[2139]: [2139] DETAIL: Streaming transactions committing after 0/8034ED0, reading WAL from 0/8034E98. vm-test-run-wal2json> server # [ 193.647396] postgres[2139]: [2139] STATEMENT: select vm-test-run-wal2json> server # [ 193.648039] postgres[2139]: data vm-test-run-wal2json> server # [ 193.650376] postgres[2139]: from vm-test-run-wal2json> server # [ 193.651806] postgres[2139]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 193.653017] postgres[2139]: 'reg_test', vm-test-run-wal2json> server # [ 193.653778] postgres[2139]: null, vm-test-run-wal2json> server # [ 193.655710] postgres[2139]: null, vm-test-run-wal2json> server # [ 193.657281] postgres[2139]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 193.658597] postgres[2139]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 193.659141] postgres[2139]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 193.659447] postgres[2139]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 193.659923] postgres[2139]: 'format-version', '2', vm-test-run-wal2json> server # [ 193.661153] postgres[2139]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 193.662204] postgres[2139]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 193.662564] postgres[2139]: ) x; vm-test-run-wal2json> server # [ 193.664040] postgres[2139]: [2139] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 193.665751] postgres[2139]: [2139] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 193.666220] postgres[2139]: [2139] STATEMENT: select vm-test-run-wal2json> server # [ 193.666727] postgres[2139]: data vm-test-run-wal2json> server # [ 193.667372] postgres[2139]: from vm-test-run-wal2json> server # [ 193.667963] postgres[2139]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 193.668905] postgres[2139]: 'reg_test', vm-test-run-wal2json> server # [ 193.669207] postgres[2139]: null, vm-test-run-wal2json> server # [ 193.669442] postgres[2139]: null, vm-test-run-wal2json> server # [ 193.669668] postgres[2139]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 193.669912] postgres[2139]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 193.670159] postgres[2139]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 193.670401] postgres[2139]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 193.670634] postgres[2139]: 'format-version', '2', vm-test-run-wal2json> server # [ 193.673455] postgres[2139]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 193.674023] postgres[2139]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 193.674308] postgres[2139]: ) x; vm-test-run-wal2json> server # [ 193.902584] sudo[2132]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.29 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 502 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after extension upgrade, in 1.29 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.33 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.37 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.34 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.04 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 195.317511] sudo[2154]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 195.453820] sudo[2154]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 195.854652] postgres[2161]: [2161] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 195.858547] postgres[2161]: [2161] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 195.860193] postgres[2161]: [2161] STATEMENT: select vm-test-run-wal2json> server # [ 195.864022] postgres[2161]: 1 vm-test-run-wal2json> server # [ 195.865342] postgres[2161]: from vm-test-run-wal2json> server # [ 195.866265] postgres[2161]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 195.900808] postgres[2161]: [2161] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 195.902050] postgres[2161]: [2161] DETAIL: Streaming transactions committing after 0/803B920, reading WAL from 0/803B8E8. vm-test-run-wal2json> server # [ 195.903063] postgres[2161]: [2161] STATEMENT: select vm-test-run-wal2json> server # [ 195.903529] postgres[2161]: data vm-test-run-wal2json> server # [ 195.903830] postgres[2161]: from vm-test-run-wal2json> server # [ 195.905318] postgres[2161]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 195.906016] postgres[2161]: 'reg_test', vm-test-run-wal2json> server # [ 195.906634] postgres[2161]: null, vm-test-run-wal2json> server # [ 195.906938] postgres[2161]: null, vm-test-run-wal2json> server # [ 195.907161] postgres[2161]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 195.907382] postgres[2161]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 195.908463] postgres[2161]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 195.910470] postgres[2161]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 195.911305] postgres[2161]: 'format-version', '2', vm-test-run-wal2json> server # [ 195.911608] postgres[2161]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 195.911878] postgres[2161]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 195.913953] postgres[2161]: ) x; vm-test-run-wal2json> server # [ 195.915021] postgres[2161]: [2161] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 195.915939] postgres[2161]: [2161] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 195.916604] postgres[2161]: [2161] STATEMENT: select vm-test-run-wal2json> server # [ 195.916912] postgres[2161]: data vm-test-run-wal2json> server # [ 195.917523] postgres[2161]: from vm-test-run-wal2json> server # [ 195.918047] postgres[2161]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 195.918344] postgres[2161]: 'reg_test', vm-test-run-wal2json> server # [ 195.918853] postgres[2161]: null, vm-test-run-wal2json> server # [ 195.919099] postgres[2161]: null, vm-test-run-wal2json> server # [ 195.919331] postgres[2161]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 195.919752] postgres[2161]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 195.921611] postgres[2161]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 195.922864] postgres[2161]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 195.923384] postgres[2161]: 'format-version', '2', vm-test-run-wal2json> server # [ 195.923673] postgres[2161]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 195.923934] postgres[2161]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 195.924382] postgres[2161]: ) x; vm-test-run-wal2json> server # [ 196.141273] sudo[2154]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.19 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 440 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after installing the last version, in 1.19 seconds) vm-test-run-wal2json> subtest: switch to orioledb 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 202.378246] nixos[2168]: switching to system configuration /nix/store/x92yg82an9wrih717zwlv5qkx2r8n04s-nixos-system-server-test vm-test-run-wal2json> server # [ 202.391982] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 202.399621] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 202.406155] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 202.412658] postgres[2090]: [2090] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 202.414336] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 202.425605] postgres[2090]: [2090] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 202.477259] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 202.505482] postgres[2090]: [2090] LOG: background worker "logical replication launcher" (PID 2099) exited with exit code 1 vm-test-run-wal2json> server # [ 202.518332] postgres[2094]: [2094] LOG: shutting down vm-test-run-wal2json> server # [ 202.531149] postgres[2094]: [2094] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 202.566923] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 202.702008] postgres[2094]: [2094] LOG: checkpoint complete: wrote 57 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.047 s, sync=0.057 s, total=0.194 s; sync files=45, longest=0.014 s, average=0.002 s; distance=242 kB, estimate=242 kB; lsn=0/803C9C0, redo lsn=0/803C9C0 vm-test-run-wal2json> server # [ 202.744328] postgres[2090]: [2090] LOG: database system is shut down vm-test-run-wal2json> server # [ 202.807669] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 202.813762] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 202.823384] systemd[1]: postgresql.service: Consumed 1.993s CPU time, 22.2M memory peak, 264K written to disk. vm-test-run-wal2json> server # [ 202.855286] systemd[1]: postgresql-migrate.service: Deactivated successfully. vm-test-run-wal2json> server # [ 202.862179] systemd[1]: Stopped postgresql-migrate.service. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # [ 202.878691] systemd[1]: postgresql-migrate.service: Consumed 26.438s CPU time, 96.9M memory peak, 172.1M written to disk. vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 207.426556] systemd[1]: Reload requested from client PID 2168 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 207.431666] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 213.726240] systemd[1]: Reloading finished in 6283 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 214.060558] systemd[1]: Stopped target Reactivate sysinit units. vm-test-run-wal2json> server # [ 214.063915] systemd[1]: Stopping Reactivate sysinit units... vm-test-run-wal2json> server # [ 214.064946] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 214.113000] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 214.434541] dbus-daemon[632]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 214.590984] dbus-daemon[632]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 214.611907] dbus-send[2244]: method return time=1793020365.047044 sender=org.freedesktop.DBus -> destination=:1.7 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 214.698066] dbus-daemon[632]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 214.843714] dbus-daemon[632]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 214.859105] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 214.916893] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 214.922195] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 214.975635] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 215.126465] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 215.160230] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 215.178235] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 215.179430] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 215.195512] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 215.206791] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 215.207885] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 215.403848] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 215.559484] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 216.199354] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 219.357553] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 219.368546] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 219.370742] systemd[1]: suid-sgid-wrappers.service: Consumed 2.005s CPU time, 3.3M memory peak. vm-test-run-wal2json> server # [ 219.419496] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 219.480120] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 219.491829] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 219.759594] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 219.770214] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 220.972646] postgresql-pre-start[2327]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 220.975699] postgresql-pre-start[2327]: This user must also own the server process. vm-test-run-wal2json> server # [ 221.054177] postgresql-pre-start[2327]: Using language tag "en-US" for ICU locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 221.055240] postgresql-pre-start[2327]: The database cluster will be initialized with this locale configuration: vm-test-run-wal2json> server # [ 221.056081] postgresql-pre-start[2327]: locale provider: icu vm-test-run-wal2json> server # [ 221.058415] postgresql-pre-start[2327]: default collation: en-US vm-test-run-wal2json> server # [ 221.059147] postgresql-pre-start[2327]: LC_COLLATE: en_US.UTF-8 vm-test-run-wal2json> server # [ 221.059524] postgresql-pre-start[2327]: LC_CTYPE: en_US.UTF-8 vm-test-run-wal2json> server # [ 221.059849] postgresql-pre-start[2327]: LC_MESSAGES: en_US.UTF-8 vm-test-run-wal2json> server # [ 221.062399] postgresql-pre-start[2327]: LC_MONETARY: en_US.UTF-8 vm-test-run-wal2json> server # [ 221.063185] postgresql-pre-start[2327]: LC_NUMERIC: en_US.UTF-8 vm-test-run-wal2json> server # [ 221.063750] postgresql-pre-start[2327]: LC_TIME: en_US.UTF-8 vm-test-run-wal2json> server # [ 221.065802] postgresql-pre-start[2327]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 221.066816] postgresql-pre-start[2327]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 221.067536] postgresql-pre-start[2327]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 221.072906] postgresql-pre-start[2327]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 221.074263] postgresql-pre-start[2327]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 221.736799] postgresql-pre-start[2327]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 222.246776] postgresql-pre-start[2327]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 229.887357] postgresql-pre-start[2327]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 229.914972] postgresql-pre-start[2327]: creating configuration files ... ok vm-test-run-wal2json> server # [ 232.037269] postgresql-pre-start[2327]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 237.403706] postgresql-pre-start[2327]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 238.899955] postgresql-pre-start[2327]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 238.905953] postgresql-pre-start[2327]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 238.907312] postgresql-pre-start[2327]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 238.910170] postgresql-pre-start[2327]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 238.912420] postgresql-pre-start[2327]: /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 240.013724] postgres[2340]: [2340] LOG: registered custom resource manager "OrioleDB resource manager" with ID 129 vm-test-run-wal2json> server # [ 240.343488] postgres[2340]: [2340] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 240.405560] postgres[2340]: [2340] LOG: listening on IPv6 address "::1", port 5432 vm-test-run-wal2json> server # [ 240.409151] postgres[2340]: [2340] LOG: listening on IPv4 address "127.0.0.1", port 5432 vm-test-run-wal2json> server # [ 240.421901] postgres[2340]: [2340] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 240.506471] postgres[2346]: [2346] LOG: Cleanup of old files at startup. Checkpoint 0 vm-test-run-wal2json> server # [ 240.515728] postgres[2347]: [2347] LOG: orioledb background writer 0 started vm-test-run-wal2json> server # [ 240.518231] postgres[2346]: [2346] LOG: database system was shut down at 2026-10-26 13:13:07 GMT vm-test-run-wal2json> server # [ 240.607160] postgres[2340]: [2340] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 240.639394] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 240.672998] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 241.857972] postgresql-setup-start[2354]: CREATE EXTENSION vm-test-run-wal2json> server # [ 242.319854] postgresql-setup-start[2360]: CREATE ROLE vm-test-run-wal2json> server # [ 242.521901] postgresql-setup-start[2362]: ALTER ROLE vm-test-run-wal2json> server # [ 242.578541] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 242.584015] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 242.875588] nixos[2168]: finished switching to system configuration /nix/store/x92yg82an9wrih717zwlv5qkx2r8n04s-nixos-system-server-test vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" , in 0.37 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.33 seconds) vm-test-run-wal2json> (finished: subtest: switch to orioledb 17, in 47.44 seconds) vm-test-run-wal2json> subtest: Check upgrade path with orioledb 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.36 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.45 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.37 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with orioledb 17, in 1.17 seconds) vm-test-run-wal2json> subtest: Check pg_regress with orioledb 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" vm-test-run-wal2json> server # [ 245.167349] sudo[2385]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 wal2json vm-test-run-wal2json> server # [ 245.306230] sudo[2385]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 245.890954] postgres[2392]: [2392] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 245.892128] postgres[2392]: [2392] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 245.895484] postgres[2392]: [2392] STATEMENT: select vm-test-run-wal2json> server # [ 245.896127] postgres[2392]: 1 vm-test-run-wal2json> server # [ 245.897640] postgres[2392]: from vm-test-run-wal2json> server # [ 245.899636] postgres[2392]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 245.945017] postgres[2392]: [2392] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 245.947007] postgres[2392]: [2392] DETAIL: Streaming transactions committing after 0/15908A0, reading WAL from 0/1590850. vm-test-run-wal2json> server # [ 245.947804] postgres[2392]: [2392] STATEMENT: select vm-test-run-wal2json> server # [ 245.950152] postgres[2392]: data vm-test-run-wal2json> server # [ 245.950623] postgres[2392]: from vm-test-run-wal2json> server # [ 245.952922] postgres[2392]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 245.953899] postgres[2392]: 'reg_test', vm-test-run-wal2json> server # [ 245.955966] postgres[2392]: null, vm-test-run-wal2json> server # [ 245.957149] postgres[2392]: null, vm-test-run-wal2json> server # [ 245.957487] postgres[2392]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 245.957963] postgres[2392]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 245.959199] postgres[2392]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 245.959645] postgres[2392]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 245.959961] postgres[2392]: 'format-version', '2', vm-test-run-wal2json> server # [ 245.961089] postgres[2392]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 245.961674] postgres[2392]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 245.962246] postgres[2392]: ) x; vm-test-run-wal2json> server # [ 245.963124] postgres[2392]: [2392] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 245.964009] postgres[2392]: [2392] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 245.965119] postgres[2392]: [2392] STATEMENT: select vm-test-run-wal2json> server # [ 245.965444] postgres[2392]: data vm-test-run-wal2json> server # [ 245.966146] postgres[2392]: from vm-test-run-wal2json> server # [ 245.967562] postgres[2392]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 245.968362] postgres[2392]: 'reg_test', vm-test-run-wal2json> server # [ 245.969343] postgres[2392]: null, vm-test-run-wal2json> server # [ 245.969655] postgres[2392]: null, vm-test-run-wal2json> server # [ 245.969913] postgres[2392]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 245.970156] postgres[2392]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 245.970416] postgres[2392]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 245.970652] postgres[2392]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 245.971064] postgres[2392]: 'format-version', '2', vm-test-run-wal2json> server # [ 245.971561] postgres[2392]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 245.971875] postgres[2392]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 245.972916] postgres[2392]: ) x; vm-test-run-wal2json> server # [ 246.251634] sudo[2385]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/lb4v2zn6jcrdlh2n70fs9c7bvgg2nc3g-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" , in 1.50 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 647 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with orioledb 17 after installing the last version, in 1.50 seconds) vm-test-run-wal2json> (finished: run the VM test script, in 247.54 seconds) vm-test-run-wal2json> test script finished in 247.88s vm-test-run-wal2json> cleanup vm-test-run-wal2json> kill machine (pid 9) vm-test-run-wal2json> qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/y88crn50yx35fiiwcjx6xqwi6ahk7mlq-python3-3.13.11/bin/python3.13) vm-test-run-wal2json> vde_switch: EOF data port: Interrupted system call vm-test-run-wal2json> kill vlan (pid 7) vm-test-run-wal2json> (finished: cleanup, in 0.01 seconds) vm-test-run-wal2json> vde_switch: Caught signal 15, cleaning up and exiting