this derivation will be built: /nix/store/xb8xzw7b6drz23yb37c2xgvpa1dyi97n-vm-test-run-wal2json.drv building '/nix/store/xb8xzw7b6drz23yb37c2xgvpa1dyi97n-vm-test-run-wal2json.drv' on 'ssh-ng://builder@mac-linux-builder' building '/nix/store/xb8xzw7b6drz23yb37c2xgvpa1dyi97n-vm-test-run-wal2json.drv' vm-test-run-wal2json> Machine state will be reset. To keep it, pass --keep-vm-state vm-test-run-wal2json> start all VLans vm-test-run-wal2json> start vlan vm-test-run-wal2json> running vlan (pid 7; ctl /build/vde1.ctl) vm-test-run-wal2json> (finished: start all VLans, in 0.00 seconds) vm-test-run-wal2json> Test will time out and terminate in 3600 seconds vm-test-run-wal2json> run the VM test script vm-test-run-wal2json> additionally exposed symbols: vm-test-run-wal2json> server, vm-test-run-wal2json> vlan1, vm-test-run-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug vm-test-run-wal2json> Running tests for extension: wal2json vm-test-run-wal2json> start all VMs vm-test-run-wal2json> server: starting vm vm-test-run-wal2json> mke2fs 1.47.3 (8-Jul-2025) vm-test-run-wal2json> qemu-system-aarch64: Could not access KVM kernel module: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: failed to initialize kvm: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: falling back to tcg vm-test-run-wal2json> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-wal2json> server # Formatting '/build/vm-state-server/tmp.KESqCocrS3', fmt=raw size=1073741824 vm-test-run-wal2json> server # Discarding device blocks: 0/262144 done vm-test-run-wal2json> server # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-wal2json> server # Filesystem UUID: d53a9495-3e2d-4b23-a3a2-75231c66a9d4 vm-test-run-wal2json> server # Superblock backups stored on blocks: vm-test-run-wal2json> server # 32768, 98304, 163840, 229376 vm-test-run-wal2json> server # vm-test-run-wal2json> server # Allocating group tables: 0/8 done vm-test-run-wal2json> server: QEMU running (pid 9) vm-test-run-wal2json> server # Writing inode tables: 0/8 done vm-test-run-wal2json> server # Creating journal (8192 blocks): done vm-test-run-wal2json> server # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-wal2json> server # vm-test-run-wal2json> server # Virtualisation disk image created. vm-test-run-wal2json> (finished: start all VMs, in 0.14 seconds) vm-test-run-wal2json> server: waiting for unit multi-user.target vm-test-run-wal2json> server: waiting for the VM to finish booting vm-test-run-wal2json> server # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510] vm-test-run-wal2json> server # [ 0.000000] Linux version 6.12.63 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP Thu Dec 18 12:55:23 UTC 2025 vm-test-run-wal2json> server # [ 0.000000] KASLR enabled vm-test-run-wal2json> server # [ 0.000000] random: crng init done vm-test-run-wal2json> server # [ 0.000000] Machine model: linux,dummy-virt vm-test-run-wal2json> server # [ 0.000000] efi: UEFI not found. vm-test-run-wal2json> server # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT vm-test-run-wal2json> server # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] NODE_DATA(0) allocated [mem 0x13f602200-0x13f60593f] vm-test-run-wal2json> server # [ 0.000000] Zone ranges: vm-test-run-wal2json> server # [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] vm-test-run-wal2json> server # [ 0.000000] DMA32 empty vm-test-run-wal2json> server # [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Device empty vm-test-run-wal2json> server # [ 0.000000] Movable zone start for each node vm-test-run-wal2json> server # [ 0.000000] Early memory node ranges vm-test-run-wal2json> server # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 vm-test-run-wal2json> server # [ 0.000000] psci: probing for conduit method from DT. vm-test-run-wal2json> server # [ 0.000000] psci: PSCIv1.1 detected in firmware. vm-test-run-wal2json> server # [ 0.000000] psci: Using standard PSCI v0.2 function IDs vm-test-run-wal2json> server # [ 0.000000] psci: Trusted OS migration not required vm-test-run-wal2json> server # [ 0.000000] psci: SMC Calling Convention v1.0 vm-test-run-wal2json> server # [ 0.000000] percpu: Embedded 88 pages/cpu s180056 r65536 d114856 u360448 vm-test-run-wal2json> server # [ 0.000000] Detected PIPT I-cache on CPU0 vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: GIC system register CPU interface vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: HCRX_EL2 register vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: 52-bit Virtual Addressing (LPA2) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Spectre-v4 vm-test-run-wal2json> server # [ 0.000000] alternatives: applying boot alternatives vm-test-run-wal2json> server # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/j4gsgzj4fy9yqawqmf0pn2wmwcsvbzji-nixos-system-server-test/init regInfo=/nix/store/577mggvqsqhrz2z203rdc8ak48avlhrq-closure-info/registration console=ttyAMA0,115200n8 console=tty0 vm-test-run-wal2json> server # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/577mggvqsqhrz2z203rdc8ak48avlhrq-closure-info/registration", will be passed to user space. vm-test-run-wal2json> server # [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Fallback order for Node 0: 0 vm-test-run-wal2json> server # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 vm-test-run-wal2json> server # [ 0.000000] Policy zone: Normal vm-test-run-wal2json> server # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-wal2json> server # [ 0.000000] software IO TLB: area num 2. vm-test-run-wal2json> server # [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) vm-test-run-wal2json> server # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-wal2json> server # [ 0.000000] allocated 8388608 bytes of page_ext vm-test-run-wal2json> server # [ 0.000000] ftrace: allocating 72257 entries in 283 pages vm-test-run-wal2json> server # [ 0.000000] ftrace: allocated 283 pages with 5 groups vm-test-run-wal2json> server # [ 0.000000] rcu: Hierarchical RCU implementation. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU event tracing is enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] Rude variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] Tracing variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. vm-test-run-wal2json> server # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 vm-test-run-wal2json> server # [ 0.000000] GICv3: 256 SPIs implemented vm-test-run-wal2json> server # [ 0.000000] GICv3: 0 Extended SPIs implemented vm-test-run-wal2json> server # [ 0.000000] Root IRQ handler: gic_handle_irq vm-test-run-wal2json> server # [ 0.000000] GICv3: GICv3 features: 16 PPIs vm-test-run-wal2json> server # [ 0.000000] GICv3: GICD_CTRL.DS=1, SCR_EL3.FIQ=0 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 vm-test-run-wal2json> server # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @100ae0000 (indirect, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @100af0000 (flat, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] GICv3: using LPI property table @0x0000000100b00000 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100b10000 vm-test-run-wal2json> server # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-wal2json> server # [ 0.000000] arch_timer: cp15 timer(s) running at 1000.00MHz (virt). vm-test-run-wal2json> server # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-wal2json> server # [ 0.000032] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns vm-test-run-wal2json> server # [ 0.002724] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-wal2json> server # [ 0.013024] Console: colour dummy device 80x25 vm-test-run-wal2json> server # [ 0.014429] printk: legacy console [tty0] enabled vm-test-run-wal2json> server # [ 0.020552] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) vm-test-run-wal2json> server # [ 0.020954] pid_max: default: 32768 minimum: 301 vm-test-run-wal2json> server # [ 0.022917] LSM: initializing lsm=capability,landlock,yama,bpf vm-test-run-wal2json> server # [ 0.024683] landlock: Up and running. vm-test-run-wal2json> server # [ 0.025006] Yama: becoming mindful. vm-test-run-wal2json> server # [ 0.027801] LSM support for eBPF active vm-test-run-wal2json> server # [ 0.031241] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.031459] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.060505] cacheinfo: Unable to detect cache hierarchy for CPU 0 vm-test-run-wal2json> server # [ 0.071827] rcu: Hierarchical SRCU implementation. vm-test-run-wal2json> server # [ 0.071920] rcu: Max phase no-delay instances is 1000. vm-test-run-wal2json> server # [ 0.073344] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-wal2json> server # [ 0.079827] fsl-mc MSI: its@8080000 domain created vm-test-run-wal2json> server # [ 0.081983] EFI services will not be available. vm-test-run-wal2json> server # [ 0.084091] smp: Bringing up secondary CPUs ... vm-test-run-wal2json> server # [ 0.088646] Detected PIPT I-cache on CPU1 vm-test-run-wal2json> server # [ 0.089817] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000 vm-test-run-wal2json> server # [ 0.091058] GICv3: CPU1: using allocated LPI pending table @0x0000000100b20000 vm-test-run-wal2json> server # [ 0.092597] CPU1: Booted secondary processor 0x0000000001 [0x000f0510] vm-test-run-wal2json> server # [ 0.096137] smp: Brought up 1 node, 2 CPUs vm-test-run-wal2json> server # [ 0.096281] SMP: Total of 2 processors activated. vm-test-run-wal2json> server # [ 0.096325] CPU: All CPU(s) started at EL1 vm-test-run-wal2json> server # [ 0.096497] CPU features: detected: Branch Target Identification vm-test-run-wal2json> server # [ 0.096553] CPU features: detected: 32-bit EL0 Support vm-test-run-wal2json> server # [ 0.096586] CPU features: detected: 32-bit EL1 Support vm-test-run-wal2json> server # [ 0.096612] CPU features: detected: ARMv8.4 Translation Table Level vm-test-run-wal2json> server # [ 0.096643] CPU features: detected: Instruction cache invalidation not required for I/D coherence vm-test-run-wal2json> server # [ 0.096677] CPU features: detected: Data cache clean to the PoU not required for I/D coherence vm-test-run-wal2json> server # [ 0.096736] CPU features: detected: Common not Private translations vm-test-run-wal2json> server # [ 0.096758] CPU features: detected: CRC32 instructions vm-test-run-wal2json> server # [ 0.096777] CPU features: detected: Data cache clean to Point of Deep Persistence vm-test-run-wal2json> server # [ 0.096807] CPU features: detected: Data cache clean to Point of Persistence vm-test-run-wal2json> server # [ 0.096834] CPU features: detected: Data independent timing control (DIT) vm-test-run-wal2json> server # [ 0.096859] CPU features: detected: E0PD vm-test-run-wal2json> server # [ 0.096877] CPU features: detected: Enhanced Counter Virtualization vm-test-run-wal2json> server # [ 0.096901] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) vm-test-run-wal2json> server # [ 0.096925] CPU features: detected: Enhanced Privileged Access Never vm-test-run-wal2json> server # [ 0.096946] CPU features: detected: Enhanced Virtualization Traps vm-test-run-wal2json> server # [ 0.096968] CPU features: detected: Fine Grained Traps vm-test-run-wal2json> server # [ 0.097029] CPU features: detected: Generic authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.097115] CPU features: detected: RCpc load-acquire (LDAPR) vm-test-run-wal2json> server # [ 0.097165] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2) vm-test-run-wal2json> server # [ 0.097194] CPU features: detected: LSE atomic instructions vm-test-run-wal2json> server # [ 0.097218] CPU features: detected: Memory Copy and Memory Set instructions vm-test-run-wal2json> server # [ 0.097245] CPU features: detected: Privileged Access Never vm-test-run-wal2json> server # [ 0.097270] CPU features: detected: RAS Extension Support vm-test-run-wal2json> server # [ 0.097294] CPU features: detected: Random Number Generator vm-test-run-wal2json> server # [ 0.097318] CPU features: detected: Speculation barrier (SB) vm-test-run-wal2json> server # [ 0.097339] CPU features: detected: Stage-2 Force Write-Back vm-test-run-wal2json> server # [ 0.097364] CPU features: detected: Trap EL0 IMPLEMENTATION DEFINED functionality vm-test-run-wal2json> server # [ 0.097394] CPU features: detected: TLB range maintenance instructions vm-test-run-wal2json> server # [ 0.097421] CPU features: detected: WFx with timeout vm-test-run-wal2json> server # [ 0.097464] CPU features: detected: Speculative Store Bypassing Safe (SSBS) vm-test-run-wal2json> server # [ 0.097491] CPU features: detected: Scalable Vector Extension vm-test-run-wal2json> server # [ 0.102767] alternatives: applying system-wide alternatives vm-test-run-wal2json> server # [ 0.119665] CPU features: detected: Hardware dirty bit management on CPU0-1 vm-test-run-wal2json> server # [ 0.120297] SVE: maximum available vector length 256 bytes per vector vm-test-run-wal2json> server # [ 0.120390] SVE: default vector length 64 bytes per vector vm-test-run-wal2json> server # [ 0.132445] Memory: 3922900K/4194304K available (23296K kernel code, 6546K rwdata, 24596K rodata, 4416K init, 1047K bss, 223164K reserved, 32768K cma-reserved) vm-test-run-wal2json> server # [ 0.155709] devtmpfs: initialized vm-test-run-wal2json> server # [ 0.184012] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns vm-test-run-wal2json> server # [ 0.184485] futex hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.187126] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL vm-test-run-wal2json> server # [ 0.187200] 0 pages in range for non-PLT usage vm-test-run-wal2json> server # [ 0.187240] 509248 pages in range for PLT usage vm-test-run-wal2json> server # [ 0.189770] pinctrl core: initialized pinctrl subsystem vm-test-run-wal2json> server # [ 0.200944] DMI not present or invalid. vm-test-run-wal2json> server # [ 0.218908] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-wal2json> server # [ 0.230636] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations vm-test-run-wal2json> server # [ 0.232428] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-wal2json> server # [ 0.233802] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-wal2json> server # [ 0.234090] audit: initializing netlink subsys (disabled) vm-test-run-wal2json> server # [ 0.236021] audit: type=2000 audit(0.196:1): state=initialized audit_enabled=0 res=1 vm-test-run-wal2json> server # [ 0.241919] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-wal2json> server # [ 0.241978] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-wal2json> server # [ 0.242038] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-wal2json> server # [ 0.242070] thermal_sys: Registered thermal governor 'user_space' vm-test-run-wal2json> server # [ 0.242182] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-wal2json> server # [ 0.243032] cpuidle: using governor ladder vm-test-run-wal2json> server # [ 0.243422] cpuidle: using governor menu vm-test-run-wal2json> server # [ 0.245298] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. vm-test-run-wal2json> server # [ 0.246007] ASID allocator initialised with 65536 entries vm-test-run-wal2json> server # [ 0.253355] Serial: AMBA PL011 UART driver vm-test-run-wal2json> server # [ 0.301504] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 vm-test-run-wal2json> server # [ 0.302526] printk: legacy console [ttyAMA0] enabled vm-test-run-wal2json> server # [ 0.333778] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.333946] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-wal2json> server # [ 0.334040] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.334492] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page vm-test-run-wal2json> server # [ 0.334726] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.334826] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-wal2json> server # [ 0.334917] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.335006] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page vm-test-run-wal2json> server # [ 0.346621] fbcon: Taking over console vm-test-run-wal2json> server # [ 0.347845] ACPI: Interpreter disabled. vm-test-run-wal2json> server # [ 0.355647] iommu: Default domain type: Translated vm-test-run-wal2json> server # [ 0.355801] iommu: DMA domain TLB invalidation policy: strict mode vm-test-run-wal2json> server # [ 0.358530] SCSI subsystem initialized vm-test-run-wal2json> server # [ 0.361166] usbcore: registered new interface driver usbfs vm-test-run-wal2json> server # [ 0.362267] usbcore: registered new interface driver hub vm-test-run-wal2json> server # [ 0.362504] usbcore: registered new device driver usb vm-test-run-wal2json> server # [ 0.365062] pps_core: LinuxPPS API ver. 1 registered vm-test-run-wal2json> server # [ 0.365172] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti vm-test-run-wal2json> server # [ 0.365346] PTP clock support registered vm-test-run-wal2json> server # [ 0.365704] EDAC MC: Ver: 3.0.0 vm-test-run-wal2json> server # [ 0.367843] scmi_core: SCMI protocol bus registered vm-test-run-wal2json> server # [ 0.370884] FPGA manager framework vm-test-run-wal2json> server # [ 0.372301] Advanced Linux Sound Architecture Driver Initialized. vm-test-run-wal2json> server # [ 0.380728] vgaarb: loaded vm-test-run-wal2json> server # [ 0.385697] clocksource: Switched to clocksource arch_sys_counter vm-test-run-wal2json> server # [ 0.394766] VFS: Disk quotas dquot_6.6.0 vm-test-run-wal2json> server # [ 0.394988] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-wal2json> server # [ 0.396976] netfs: FS-Cache loaded vm-test-run-wal2json> server # [ 0.399235] pnp: PnP ACPI: disabled vm-test-run-wal2json> server # [ 0.420632] NET: Registered PF_INET protocol family vm-test-run-wal2json> server # [ 0.422144] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-wal2json> server # [ 0.534290] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.534668] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.535560] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.536743] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) vm-test-run-wal2json> server # [ 0.538575] TCP: Hash tables configured (established 32768 bind 32768) vm-test-run-wal2json> server # [ 0.540335] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear) vm-test-run-wal2json> server # [ 0.540771] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.541247] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.542972] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-wal2json> server # [ 0.543545] NET: Registered PF_XDP protocol family vm-test-run-wal2json> server # [ 0.543771] PCI: CLS 0 bytes, default 64 vm-test-run-wal2json> server # [ 0.546526] kvm [1]: HYP mode not available vm-test-run-wal2json> server # [ 0.551998] Trying to unpack rootfs image as initramfs... vm-test-run-wal2json> server # [ 0.655804] Initialise system trusted keyrings vm-test-run-wal2json> server # [ 0.657787] workingset: timestamp_bits=42 max_order=20 bucket_order=0 vm-test-run-wal2json> server # [ 0.662245] squashfs: version 4.0 (2009/01/31) Phillip Lougher vm-test-run-wal2json> server # [ 0.662889] 9p: Installing v9fs 9p2000 file system support vm-test-run-wal2json> server # [ 0.726570] Key type asymmetric registered vm-test-run-wal2json> server # [ 0.726790] Asymmetric key parser 'x509' registered vm-test-run-wal2json> server # [ 0.727186] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) vm-test-run-wal2json> server # [ 0.728458] io scheduler mq-deadline registered vm-test-run-wal2json> server # [ 0.728623] io scheduler kyber registered vm-test-run-wal2json> server # [ 0.757204] pl061_gpio 9030000.pl061: PL061 GPIO chip registered vm-test-run-wal2json> server # [ 0.762891] ledtrig-cpu: registered to indicate activity on CPUs vm-test-run-wal2json> server # [ 0.766625] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: vm-test-run-wal2json> server # [ 0.767221] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 vm-test-run-wal2json> server # [ 0.767893] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 vm-test-run-wal2json> server # [ 0.768174] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 vm-test-run-wal2json> server # [ 0.768677] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits vm-test-run-wal2json> server # [ 0.769198] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] vm-test-run-wal2json> server # [ 0.770879] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 vm-test-run-wal2json> server # [ 0.771688] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-wal2json> server # [ 0.772024] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.772346] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.772571] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.774350] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.777351] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.777660] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.777783] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.777912] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.778066] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.780071] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.780259] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.780363] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.780473] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.780931] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.781073] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.781164] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.781270] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.782854] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.783079] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.783552] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.784006] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.784524] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.784679] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.784782] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.784896] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.785318] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.785944] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] vm-test-run-wal2json> server # [ 0.786225] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.786339] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.788469] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.788779] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.789125] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.789262] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.789368] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.790376] pci 0000:00:08.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.790588] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.790710] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.791351] pci 0000:00:09.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.791824] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.792143] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.792714] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.793218] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.794714] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.794957] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.795427] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.795555] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.796061] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.796474] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.796697] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.796941] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.800091] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned vm-test-run-wal2json> server # [ 0.800501] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned vm-test-run-wal2json> server # [ 0.800679] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.800890] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.801043] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.801178] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.801308] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.801441] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.801569] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.802703] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.802974] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.803112] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.803626] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.803771] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned vm-test-run-wal2json> server # [ 0.803888] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned vm-test-run-wal2json> server # [ 0.803995] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned vm-test-run-wal2json> server # [ 0.804151] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned vm-test-run-wal2json> server # [ 0.804257] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned vm-test-run-wal2json> server # [ 0.804371] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned vm-test-run-wal2json> server # [ 0.804471] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned vm-test-run-wal2json> server # [ 0.804571] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned vm-test-run-wal2json> server # [ 0.804689] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned vm-test-run-wal2json> server # [ 0.804790] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned vm-test-run-wal2json> server # [ 0.804894] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned vm-test-run-wal2json> server # [ 0.804998] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned vm-test-run-wal2json> server # [ 0.805112] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned vm-test-run-wal2json> server # [ 0.805230] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned vm-test-run-wal2json> server # [ 0.805329] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned vm-test-run-wal2json> server # [ 0.805421] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned vm-test-run-wal2json> server # [ 0.805519] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned vm-test-run-wal2json> server # [ 0.805612] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned vm-test-run-wal2json> server # [ 0.805706] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned vm-test-run-wal2json> server # [ 0.805805] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned vm-test-run-wal2json> server # [ 0.805903] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned vm-test-run-wal2json> server # [ 0.807351] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.807878] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.807978] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.808879] pci 0000:00:0a.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.864745] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.868622] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.871050] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.873981] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.875579] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.876813] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.879242] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.881369] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.883123] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.886290] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.888174] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.904539] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-wal2json> server # [ 0.915100] msm_serial: driver initialized vm-test-run-wal2json> server # [ 0.916146] SuperH (H)SCI(F) driver initialized vm-test-run-wal2json> server # [ 0.916591] STM32 USART driver initialized vm-test-run-wal2json> server # [ 0.966126] loop: module loaded vm-test-run-wal2json> server # [ 0.967752] virtio_blk virtio5: 2/0/0 default/read/poll queues vm-test-run-wal2json> server # [ 0.971973] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-wal2json> server # [ 0.984158] megasas: 07.727.03.00-rc1 vm-test-run-wal2json> server # [ 0.988900] Freeing initrd memory: 10684K vm-test-run-wal2json> server # [ 0.988997] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] vm-test-run-wal2json> server # [ 0.991974] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 0.992588] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 0.995066] Using buffer write method vm-test-run-wal2json> server # [ 0.995795] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] vm-test-run-wal2json> server # [ 0.997624] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 0.998452] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 0.999804] Using buffer write method vm-test-run-wal2json> server # [ 1.000321] Concatenating MTD devices: vm-test-run-wal2json> server # [ 1.000539] (0): "0.flash" vm-test-run-wal2json> server # [ 1.000605] (1): "0.flash" vm-test-run-wal2json> server # [ 1.000664] into device "0.flash" vm-test-run-wal2json> server # [ 1.024761] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-wal2json> server # [ 1.037226] thunder_xcv, ver 1.0 vm-test-run-wal2json> server # [ 1.037932] thunder_bgx, ver 1.0 vm-test-run-wal2json> server # [ 1.038834] nicpf, ver 1.0 vm-test-run-wal2json> server # [ 1.042513] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version vm-test-run-wal2json> server # [ 1.042734] hns3: Copyright (c) 2017 Huawei Corporation. vm-test-run-wal2json> server # [ 1.043127] hclge is initializing vm-test-run-wal2json> server # [ 1.043650] e1000: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.043883] e1000: Copyright (c) 1999-2006 Intel Corporation. vm-test-run-wal2json> server # [ 1.044195] e1000e: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.044416] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. vm-test-run-wal2json> server # [ 1.044624] igb: Intel(R) Gigabit Ethernet Network Driver vm-test-run-wal2json> server # [ 1.044712] igb: Copyright (c) 2007-2014 Intel Corporation. vm-test-run-wal2json> server # [ 1.044887] igbvf: Intel(R) Gigabit Virtual Function Network Driver vm-test-run-wal2json> server # [ 1.044988] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. vm-test-run-wal2json> server # [ 1.046193] sky2: driver version 1.30 vm-test-run-wal2json> server # [ 1.053489] ehci-pci 0000:00:0a.0: EHCI Host Controller vm-test-run-wal2json> server # [ 1.055899] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 vm-test-run-wal2json> server # [ 1.056865] usbcore: registered new interface driver usb-storage vm-test-run-wal2json> server # [ 1.057808] usbcore: registered new interface driver usbserial_generic vm-test-run-wal2json> server # [ 1.058096] usbserial: USB Serial support registered for generic vm-test-run-wal2json> server # [ 1.058830] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 vm-test-run-wal2json> server # [ 1.067119] rtc-pl031 9010000.pl031: registered as rtc0 vm-test-run-wal2json> server # [ 1.067844] rtc-pl031 9010000.pl031: setting system clock to 2026-10-26T12:21:20 UTC (1793017280) vm-test-run-wal2json> server # [ 1.070392] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 vm-test-run-wal2json> server # [ 1.070439] i2c_dev: i2c /dev entries driver vm-test-run-wal2json> server # [ 1.077714] hub 1-0:1.0: USB hub found vm-test-run-wal2json> server # [ 1.078672] hub 1-0:1.0: 6 ports detected vm-test-run-wal2json> server # [ 1.086920] sdhci: Secure Digital Host Controller Interface driver vm-test-run-wal2json> server # [ 1.087079] sdhci: Copyright(c) Pierre Ossman vm-test-run-wal2json> server # [ 1.088614] Synopsys Designware Multimedia Card Interface Driver vm-test-run-wal2json> server # [ 1.091153] sdhci-pltfm: SDHCI platform and OF driver helper vm-test-run-wal2json> server # [ 1.097514] hid: raw HID events driver (C) Jiri Kosina vm-test-run-wal2json> server # [ 1.100007] usbcore: registered new interface driver usbhid vm-test-run-wal2json> server # [ 1.100144] usbhid: USB HID core driver vm-test-run-wal2json> server # [ 1.107904] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available vm-test-run-wal2json> server # [ 1.121184] drop_monitor: Initializing network drop monitor service vm-test-run-wal2json> server # [ 1.123280] NET: Registered PF_INET6 protocol family vm-test-run-wal2json> server # [ 1.140451] Segment Routing with IPv6 vm-test-run-wal2json> server # [ 1.140854] In-situ OAM (IOAM) with IPv6 vm-test-run-wal2json> server # [ 1.141506] NET: Registered PF_PACKET protocol family vm-test-run-wal2json> server # [ 1.143904] 9pnet: Installing 9P2000 support vm-test-run-wal2json> server # [ 1.148910] Key type dns_resolver registered vm-test-run-wal2json> server # [ 1.185918] registered taskstats version 1 vm-test-run-wal2json> server # [ 1.188366] Loading compiled-in X.509 certificates vm-test-run-wal2json> server # [ 1.246964] Demotion targets for Node 0: null vm-test-run-wal2json> server # [ 1.250285] Key type .fscrypt registered vm-test-run-wal2json> server # [ 1.250449] Key type fscrypt-provisioning registered vm-test-run-wal2json> server # [ 1.259760] input: gpio-keys as /devices/platform/gpio-keys/input/input0 vm-test-run-wal2json> server # [ 1.305785] clk: Disabling unused clocks vm-test-run-wal2json> server # [ 1.306476] PM: genpd: Disabling unused power domains vm-test-run-wal2json> server # [ 1.306870] ALSA device list: vm-test-run-wal2json> server # [ 1.307178] No soundcards found. vm-test-run-wal2json> server # [ 1.392400] Freeing unused kernel memory: 4416K vm-test-run-wal2json> server # [ 1.393277] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-wal2json> server # [ 1.395007] Run /init as init process vm-test-run-wal2json> server # [ 1.577969] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 vm-test-run-wal2json> server # [ 1.709676] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 vm-test-run-wal2json> server # [ 1.833628] usb 1-2: new high-speed USB device number 3 using ehci-pci vm-test-run-wal2json> server # [ 1.993345] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev vm-test-run-wal2json> server # [ 2.012639] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 vm-test-run-wal2json> server # [ 2.015555] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 vm-test-run-wal2json> server # [ 2.123700] [drm] pci: virtio-gpu-pci detected at 0000:00:09.0 vm-test-run-wal2json> server # [ 2.124358] [drm] features: -virgl +edid -resource_blob -host_visible vm-test-run-wal2json> server # [ 2.124381] [drm] features: -context_init vm-test-run-wal2json> server # [ 2.126528] [drm] number of scanouts: 1 vm-test-run-wal2json> server # [ 2.126641] [drm] number of cap sets: 0 vm-test-run-wal2json> server # [ 2.137923] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:09.0 on minor 0 vm-test-run-wal2json> server # [ 2.170850] Console: switching to colour frame buffer device 160x50 vm-test-run-wal2json> server # [ 2.182129] virtio-pci 0000:00:09.0: [drm] fb0: virtio_gpudrmfb frame buffer device vm-test-run-wal2json> server # [ 4.989925] EXT4-fs (vda): mounted filesystem d53a9495-3e2d-4b23-a3a2-75231c66a9d4 r/w with ordered data mode. Quota mode: none. vm-test-run-wal2json> server # [ 7.566014] EXT4-fs (vda): re-mounted d53a9495-3e2d-4b23-a3a2-75231c66a9d4. vm-test-run-wal2json> server # [ 7.585039] booting system configuration /nix/store/j4gsgzj4fy9yqawqmf0pn2wmwcsvbzji-nixos-system-server-test vm-test-run-wal2json> server # [ 20.908964] systemd[1]: systemd 258.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) vm-test-run-wal2json> server # [ 20.920890] systemd[1]: Detected virtualization qemu. vm-test-run-wal2json> server # [ 20.926604] systemd[1]: Detected architecture arm64. vm-test-run-wal2json> server # [ 20.932084] systemd[1]: Detected first boot. vm-test-run-wal2json> server # [ 20.964334] systemd[1]: Initializing machine ID from random generator. vm-test-run-wal2json> server # [ 21.002614] systemd[1]: Hostname set to . vm-test-run-wal2json> server # [ 22.312122] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-wal2json> server # [ 23.864604] NET: Registered PF_VSOCK protocol family vm-test-run-wal2json> server # [ 23.909642] Guest personality initialized and is inactive vm-test-run-wal2json> server # [ 23.915969] VMCI host device registered (name=vmci, major=10, minor=261) vm-test-run-wal2json> server # [ 23.919107] Initialized host personality vm-test-run-wal2json> server # [ 24.168875] systemd[1]: Applying preset policy. vm-test-run-wal2json> server # [ 28.259188] systemd[1]: Populated /etc with preset unit settings. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 32.131953] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-wal2json> server # [ 32.361279] systemd[1]: Created slice Slice /system/getty. vm-test-run-wal2json> server # [ 32.376667] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-wal2json> server # [ 32.392310] systemd[1]: Created slice User and Session Slice. vm-test-run-wal2json> server # [ 32.400730] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-wal2json> server # [ 32.406852] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-wal2json> server # [ 32.412576] systemd[1]: Expecting device /dev/hvc0... vm-test-run-wal2json> server # [ 32.418280] systemd[1]: Expecting device /dev/ttyAMA0... vm-test-run-wal2json> server # [ 32.422467] systemd[1]: Expecting device /sys/subsystem/net/devices/eth1... vm-test-run-wal2json> server # [ 32.426263] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-wal2json> server # [ 32.431043] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-wal2json> server # [ 32.434915] systemd[1]: Reached target Path Units. vm-test-run-wal2json> server # [ 32.440373] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 32.443918] systemd[1]: Reached target Slice Units. vm-test-run-wal2json> server # [ 32.448979] systemd[1]: Reached target Swaps. vm-test-run-wal2json> server # [ 32.488575] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-wal2json> server # [ 32.514251] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-wal2json> server # [ 32.525840] systemd[1]: Listening on Journal Audit Socket. vm-test-run-wal2json> server # [ 32.532616] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-wal2json> server # [ 32.539739] systemd[1]: Listening on Journal Sockets. vm-test-run-wal2json> server # [ 32.548106] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-wal2json> server # [ 32.553589] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 32.560053] systemd[1]: Listening on udev Control Socket. vm-test-run-wal2json> server # [ 32.567036] systemd[1]: Listening on udev Kernel Socket. vm-test-run-wal2json> server # [ 32.616565] systemd[1]: Mounting Huge Pages File System... vm-test-run-wal2json> server # [ 32.659668] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-wal2json> server # [ 32.718379] systemd[1]: Mounting Kernel Debug File System... vm-test-run-wal2json> server # [ 32.776522] systemd[1]: Mounting Kernel Trace File System... vm-test-run-wal2json> server # [ 32.956362] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-wal2json> server # [ 33.068132] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-wal2json> server # [ 33.092543] systemd[1]: Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs). vm-test-run-wal2json> server # [ 33.207178] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-wal2json> server # [ 33.231996] systemd[1]: Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm). vm-test-run-wal2json> server # [ 33.242342] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 33.380347] systemd[1]: Starting Load Kernel Module fuse... vm-test-run-wal2json> server # [ 33.407593] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 33.426047] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 33.540823] systemd[1]: Starting Journal Service... vm-test-run-wal2json> server # [ 33.667898] systemd[1]: Starting Load Kernel Modules... vm-test-run-wal2json> server # [ 33.735080] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-wal2json> server # [ 33.798139] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-wal2json> server # [ 33.803988] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 33.888913] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-wal2json> server # [ 33.981869] systemd[1]: Mounted Huge Pages File System. vm-test-run-wal2json> server # [ 33.992052] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-wal2json> server # [ 34.008703] systemd[1]: Mounted Kernel Debug File System. vm-test-run-wal2json> server # [ 34.021160] systemd[1]: Mounted Kernel Trace File System. vm-test-run-wal2json> server # [ 34.052938] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-wal2json> server # [ 34.073714] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-wal2json> server # [ 34.163007] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-wal2json> server # [ 34.780183] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-wal2json> server # [ 34.793941] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-wal2json> server # [ 34.976968] EXT4-fs (vda): re-mounted d53a9495-3e2d-4b23-a3a2-75231c66a9d4. vm-test-run-wal2json> server # [ 35.078726] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-wal2json> server # [ 35.090823] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 35.152884] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-wal2json> server # [ 35.166060] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 35.180387] systemd[1]: Finished Load Kernel Modules. vm-test-run-wal2json> server # [ 35.244869] systemd[1]: Starting Firewall... vm-test-run-wal2json> server # [ 35.294040] fuse: init (API version 7.41) vm-test-run-wal2json> server # [ 35.336282] systemd[1]: Starting Apply Kernel Variables... vm-test-run-wal2json> server # [ 35.395543] systemd[1]: modprobe@fuse.service: Deactivated successfully. vm-test-run-wal2json> server # [ 35.412603] systemd[1]: Finished Load Kernel Module fuse. vm-test-run-wal2json> server # [ 35.466790] systemd[1]: Mounting FUSE Control File System... vm-test-run-wal2json> server # [ 35.644090] systemd-journald[399]: Collecting audit messages is enabled. vm-test-run-wal2json> server # [ 35.738769] systemd[1]: Mounted FUSE Control File System. vm-test-run-wal2json> server # [ 36.463188] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-wal2json> server # [ 36.474924] systemd[1]: Reached target First Boot Complete. vm-test-run-wal2json> server # [ 36.804211] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-wal2json> server # [ 36.890372] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-wal2json> server # [ 36.964607] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-wal2json> server # [ 37.001769] systemd[1]: Finished Apply Kernel Variables. vm-test-run-wal2json> server # [ 38.130595] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-wal2json> server # [ 38.152341] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-wal2json> server # [ 38.206491] systemd[1]: Mounting /run/wrappers... vm-test-run-wal2json> server # [ 38.262604] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-wal2json> server # [ 38.525055] systemd[1]: Started Journal Service. vm-test-run-wal2json> server # [ 38.484427] systemd-modules-load[400]: Module 'atkbd' is built in vm-test-run-wal2json> server # [ 38.495864] systemd-modules-load[400]: Module 'loop' is built in vm-test-run-wal2json> server # [ 38.539845] systemd-oomd[401]: No swap; memory pressure usage will be degraded vm-test-run-wal2json> server # [ 38.571157] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-wal2json> server # [ 38.765909] systemd[1]: Mounted /run/wrappers. vm-test-run-wal2json> server # [ 38.831482] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 38.855878] systemd[1]: Listening on Boot Entries Service Socket. vm-test-run-wal2json> server # [ 38.911769] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 38.933109] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 38.980001] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-wal2json> server # [ 39.696748] systemd-journald[399]: Received client request to flush runtime journal. vm-test-run-wal2json> server # [ 40.365893] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-wal2json> server # [ 40.397918] systemd-udevd[428]: Using default interface naming scheme 'v258'. vm-test-run-wal2json> server # [ 40.404950] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-wal2json> server # [ 40.429086] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-wal2json> server # [ 40.445381] systemd[1]: Starting Create System Files and Directories... vm-test-run-wal2json> server # [ 42.486412] systemd[1]: Finished Create System Files and Directories. vm-test-run-wal2json> server # [ 42.557994] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-wal2json> server # [ 42.607870] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-wal2json> server # [ 42.969781] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-wal2json> server # [ 43.799835] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-wal2json> server # [ 44.931989] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-wal2json> server # [ 44.989888] systemd[1]: Starting Update is Completed... vm-test-run-wal2json> server # [ 45.703106] systemd[1]: Finished Update is Completed. vm-test-run-wal2json> server # [ 49.883709] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 49.902963] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 49.908951] systemd[1]: suid-sgid-wrappers.service: Consumed 2.981s CPU time, 5.6M memory peak. vm-test-run-wal2json> server # [ 52.515296] systemd[1]: Finished Firewall. vm-test-run-wal2json> server # [ 54.262477] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-wal2json> server # [ 54.265765] systemd[1]: Reached target System Initialization. vm-test-run-wal2json> server # [ 54.273624] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-wal2json> server # [ 54.278106] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-wal2json> server # [ 54.285918] systemd[1]: Reached target Timer Units. vm-test-run-wal2json> server # [ 54.292946] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-wal2json> server # [ 54.297616] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-wal2json> server # [ 54.316998] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-wal2json> server # [ 54.370613] systemd[1]: Starting OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK)... vm-test-run-wal2json> server # [ 54.377732] systemd[1]: Listening on Hostname Service Socket. vm-test-run-wal2json> server # [ 54.518208] (sh-issue)[630]: sshd-vsock.socket: Unable to locate executable '/usr/lib/systemd/systemd-ssh-issue': No such file or directory vm-test-run-wal2json> server # [ 54.557526] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK). vm-test-run-wal2json> server # [ 54.559617] systemd[1]: Reached target Socket Units. vm-test-run-wal2json> server # [ 54.567428] systemd[1]: Reached target Basic System. vm-test-run-wal2json> server # [ 54.604915] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-wal2json> server # [ 54.641513] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-wal2json> server # [ 54.703914] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 54.777480] systemd[1]: Started Reset console on configuration changes. vm-test-run-wal2json> server # [ 54.817137] systemd[1]: Starting resolvconf update... vm-test-run-wal2json> server # [ 54.889904] systemd[1]: Starting SSH Host Keys Generation... vm-test-run-wal2json> server # [ 56.087089] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-wal2json> server # [ 56.425953] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 56.434565] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 56.447602] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 56.474419] nsncd[634]: Oct 26 12:22:15.880 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 56.495959] dbus-daemon[632]: dbus[632]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 56.526765] systemd[1]: Starting User Login Management... vm-test-run-wal2json> server # [ 57.142982] systemd[1]: Started D-Bus System Message Bus. vm-test-run-wal2json> server # [ 58.514829] systemd-logind[654]: New seat seat0. vm-test-run-wal2json> server # [ 58.596497] systemd[1]: Started User Login Management. vm-test-run-wal2json> server # [ 58.627370] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 58.797449] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 58.799108] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-wal2json> server # [ 58.800090] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-wal2json> server # [ 58.829966] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-wal2json> server # [ 58.837650] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 58.942102] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-wal2json> server # [ 58.953785] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 59.100208] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 59.465924] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 59.475305] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 60.098454] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 60.151772] nsncd[713]: Oct 26 12:22:19.569 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 60.162832] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 60.170310] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 60.475600] systemd[1]: Finished resolvconf update. vm-test-run-wal2json> server # [ 60.493468] systemd[1]: Reached target Preparation for Network. vm-test-run-wal2json> server # [ 60.558423] systemd[1]: Starting DHCP Client... vm-test-run-wal2json> server # [ 62.375026] dhcpcd[751]: dhcpcd-10.2.4 starting vm-test-run-wal2json> server # [ 62.511526] dhcpcd[769]: dev: loaded udev vm-test-run-wal2json> server # [ 62.935312] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-wal2json> server # [ 63.419357] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-wal2json> server # [ 63.672862] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-wal2json> server # [ 63.683356] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-wal2json> server # [ 63.718833] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 vm-test-run-wal2json> server # [ 63.730834] cfg80211: failed to load regulatory.db vm-test-run-wal2json> server # [ 64.764185] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-wal2json> server # [ 64.739323] dhcpcd[769]: eth0: waiting for carrier vm-test-run-wal2json> server # [ 64.743687] dhcpcd[769]: eth0: carrier acquired vm-test-run-wal2json> server # [ 64.785992] sshd-keygen-start[661]: Generating public/private rsa key pair. vm-test-run-wal2json> server # [ 64.791285] sshd-keygen-start[661]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key vm-test-run-wal2json> server # [ 64.797771] sshd-keygen-start[661]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub vm-test-run-wal2json> server # [ 64.805757] sshd-keygen-start[661]: The key fingerprint is: vm-test-run-wal2json> server # [ 64.809337] sshd-keygen-start[661]: SHA256:m+J3ou2w1NboYnaqJQVRPVMIeH9YwZN1mk9samQPT7I root@server vm-test-run-wal2json> server # [ 64.819388] sshd-keygen-start[661]: The key's randomart image is: vm-test-run-wal2json> server # [ 64.827451] sshd-keygen-start[661]: +---[RSA 4096]----+ vm-test-run-wal2json> server # [ 64.835324] sshd-keygen-start[661]: | .ooo +o+. . | vm-test-run-wal2json> server # [ 64.838665] sshd-keygen-start[661]: | ... = = = | vm-test-run-wal2json> server # [ 64.844837] sshd-keygen-start[661]: | .. . = .B = | vm-test-run-wal2json> server # [ 64.845919] sshd-keygen-start[661]: | . o .o % | vm-test-run-wal2json> server # [ 64.850590] sshd-keygen-start[661]: | . S. E + | vm-test-run-wal2json> server # [ 64.861131] sshd-keygen-start[661]: | . . = . | vm-test-run-wal2json> server # [ 64.863471] sshd-keygen-start[661]: | . = * . | vm-test-run-wal2json> server # [ 64.877204] sshd-keygen-start[661]: | =+B+ . | vm-test-run-wal2json> server # [ 64.885233] sshd-keygen-start[661]: | .+=B+o | vm-test-run-wal2json> server # [ 64.894498] sshd-keygen-start[661]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 64.934880] dhcpcd[769]: DUID 00:01:00:01:32:72:02:80:52:54:00:12:34:56 vm-test-run-wal2json> server # [ 64.947999] dhcpcd[769]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 64.962364] dhcpcd[769]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-wal2json> server # [ 65.410158] dhcpcd[769]: eth0: soliciting a DHCP lease vm-test-run-wal2json> server # [ 65.462451] sshd-keygen-start[808]: Generating public/private ed25519 key pair. vm-test-run-wal2json> server # [ 65.466589] sshd-keygen-start[808]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key vm-test-run-wal2json> server # [ 65.470887] sshd-keygen-start[808]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub vm-test-run-wal2json> server # [ 65.475493] sshd-keygen-start[808]: The key fingerprint is: vm-test-run-wal2json> server # [ 65.486209] sshd-keygen-start[808]: SHA256:q58C4ddwIzofqy+++pAioXbizOloZICLBbVrIxY3V+I root@server vm-test-run-wal2json> server # [ 65.489647] sshd-keygen-start[808]: The key's randomart image is: vm-test-run-wal2json> server # [ 65.496830] sshd-keygen-start[808]: +--[ED25519 256]--+ vm-test-run-wal2json> server # [ 65.499132] sshd-keygen-start[808]: | .. . . | vm-test-run-wal2json> server # [ 65.508947] sshd-keygen-start[808]: |. .. o | vm-test-run-wal2json> server # [ 65.533105] sshd-keygen-start[808]: |.o.o E | vm-test-run-wal2json> server # [ 65.534105] sshd-keygen-start[808]: |o +.+ o o | vm-test-run-wal2json> server # [ 65.538118] sshd-keygen-start[808]: |=++. o =S. | vm-test-run-wal2json> server # [ 65.542466] sshd-keygen-start[808]: |=* o= o .. | vm-test-run-wal2json> server # [ 65.545785] sshd-keygen-start[808]: |*oo. = o. | vm-test-run-wal2json> server # [ 65.548105] sshd-keygen-start[808]: |Bo+.. +. . | vm-test-run-wal2json> server # [ 65.553662] sshd-keygen-start[808]: |+*.+==ooo | vm-test-run-wal2json> server # [ 65.554668] sshd-keygen-start[808]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 65.555301] dhcpcd[769]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-wal2json> server # [ 65.569597] systemd[1]: sshd-keygen.service: Deactivated successfully. vm-test-run-wal2json> server # [ 65.573429] dhcpcd[769]: eth0: probing address 10.0.2.15/24 vm-test-run-wal2json> server # [ 65.578235] systemd[1]: Finished SSH Host Keys Generation. vm-test-run-wal2json> server # [ 65.583301] systemd[1]: sshd-keygen.service: Consumed 5.053s CPU time, 2.9M memory peak. vm-test-run-wal2json> server # [ 66.122561] systemd[1]: Found device /dev/hvc0. vm-test-run-wal2json> server # [ 67.207046] dhcpcd[769]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 67.231605] dhcpcd[769]: eth0: Router Advertisement from fe80::2 vm-test-run-wal2json> server # [ 67.238990] dhcpcd[769]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-wal2json> server # [ 67.245717] dhcpcd[769]: eth0: adding route to fec0::/64 vm-test-run-wal2json> server # [ 67.259669] dhcpcd[769]: eth0: adding default route via fe80::2 vm-test-run-wal2json> server # [ 67.659582] systemd[1]: Found device /dev/ttyAMA0. vm-test-run-wal2json> server # [ 67.716979] systemd[1]: Started backdoor.service. vm-test-run-wal2json> server # connecting to host... vm-test-run-wal2json> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-wal2json> server: connected to guest root shell vm-test-run-wal2json> server: (connecting took 69.34 seconds) vm-test-run-wal2json> server: (finished: waiting for the VM to finish booting, in 69.34 seconds) vm-test-run-wal2json> server # [ 68.785506] (udev-worker)[826]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-wal2json> server # [ 68.796106] (udev-worker)[826]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 68.835182] (udev-worker)[835]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 70.181622] dhcpcd[769]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 70.185560] dhcpcd[769]: eth0: adding route to 10.0.2.0/24 vm-test-run-wal2json> server # [ 70.187135] dhcpcd[769]: eth0: adding default route via 10.0.2.2 vm-test-run-wal2json> server # [ 70.799636] systemd[1]: Found device Virtio network device. vm-test-run-wal2json> server # [ 70.872034] systemd[1]: Starting Address configuration of eth1... vm-test-run-wal2json> server # [ 71.871453] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-wal2json> server # [ 72.178108] network-addresses-eth1-start[867]: adding address 192.168.1.1/24... done vm-test-run-wal2json> server # [ 72.451217] network-addresses-eth1-start[867]: adding address 2001:db8:1::1/64... done vm-test-run-wal2json> server # [ 72.812269] systemd[1]: Finished Address configuration of eth1. vm-test-run-wal2json> server # [ 72.876064] systemd[1]: Starting Networking Setup... vm-test-run-wal2json> server # [ 73.967617] systemd[1]: Started DHCP Client. vm-test-run-wal2json> server # [ 74.013330] dhcpcd[769]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 74.814740] dhcpcd[769]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 76.230104] systemd[1]: Finished Networking Setup. vm-test-run-wal2json> server # [ 76.251017] systemd[1]: Reached target Network. vm-test-run-wal2json> server # [ 76.300931] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 76.353606] dhcpcd[769]: eth0: rebinding lease of 10.0.2.15 vm-test-run-wal2json> server # [ 76.367225] systemd[1]: Starting SSH Daemon... vm-test-run-wal2json> server # [ 76.401633] dhcpcd[769]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 76.435037] systemd[1]: Starting Permit User Sessions... vm-test-run-wal2json> server # [ 77.526105] systemd[1]: Finished Permit User Sessions. vm-test-run-wal2json> server # [ 77.586605] systemd[1]: Started Getty on tty1. vm-test-run-wal2json> server # [ 77.601966] systemd[1]: Reached target Login Prompts. vm-test-run-wal2json> server # [ 77.795993] sshd[997]: Server listening on 0.0.0.0 port 22. vm-test-run-wal2json> server # [ 77.821717] sshd[997]: Server listening on :: port 22. vm-test-run-wal2json> server # [ 77.823749] systemd[1]: Started SSH Daemon. vm-test-run-wal2json> server # [ 80.351461] postgresql-pre-start[1023]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 80.365505] postgresql-pre-start[1023]: This user must also own the server process. vm-test-run-wal2json> server # [ 80.449796] postgresql-pre-start[1023]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 80.464865] postgresql-pre-start[1023]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 80.466690] postgresql-pre-start[1023]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 80.473047] postgresql-pre-start[1023]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 80.475204] postgresql-pre-start[1023]: fixing permissions on existing directory /var/lib/postgresql/15 ... ok vm-test-run-wal2json> server # [ 80.485450] postgresql-pre-start[1023]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 80.497212] postgresql-pre-start[1023]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 80.863949] systemd-logind[654]: Watching system buttons on /dev/input/event0 (gpio-keys) vm-test-run-wal2json> server # [ 81.462175] postgresql-pre-start[1023]: selecting default max_connections ... 100 vm-test-run-wal2json> server # [ 82.727839] postgresql-pre-start[1023]: selecting default shared_buffers ... 128MB vm-test-run-wal2json> server # [ 87.049966] mousedev: PS/2 mouse device common for all mice vm-test-run-wal2json> server # [ 90.743930] systemd-logind[654]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) vm-test-run-wal2json> server # [ 95.035771] postgresql-pre-start[1023]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 95.093185] postgresql-pre-start[1023]: creating configuration files ... ok vm-test-run-wal2json> server # [ 100.037808] postgresql-pre-start[1023]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 114.039852] postgresql-pre-start[1023]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 116.594708] postgresql-pre-start[1023]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 116.596728] postgresql-pre-start[1023]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 116.597588] postgresql-pre-start[1023]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 116.600834] postgresql-pre-start[1023]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 116.601806] postgresql-pre-start[1023]: /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/bin/pg_ctl -D /var/lib/postgresql/15 -l logfile start vm-test-run-wal2json> server # [ 118.671760] postgres[1422]: [1422] LOG: starting PostgreSQL 15.19 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 118.678963] postgres[1422]: [1422] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 118.682152] postgres[1422]: [1422] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 118.697695] postgres[1422]: [1422] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 118.839840] postgres[1438]: [1438] LOG: database system was shut down at 2026-10-26 12:23:13 GMT vm-test-run-wal2json> server # [ 119.017985] postgres[1422]: [1422] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 119.134268] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 119.165273] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 121.398103] postgresql-setup-start[1478]: CREATE ROLE vm-test-run-wal2json> server # [ 121.663234] postgresql-setup-start[1480]: ALTER ROLE vm-test-run-wal2json> server # [ 121.707070] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 121.721306] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 121.728148] systemd[1]: Reached target Multi-User System. vm-test-run-wal2json> server # [ 121.738822] systemd[1]: Startup finished in 20.033s (kernel) + 1min 41.698s (userspace) = 2min 1.731s. vm-test-run-wal2json> server: (finished: waiting for unit multi-user.target, in 123.33 seconds) vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 1.53 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.53 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 15 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.49 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.57 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.65 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 15, in 1.71 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 15 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" vm-test-run-wal2json> server # [ 127.292363] sudo[1538]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 wal2json vm-test-run-wal2json> server # [ 127.474728] sudo[1538]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # pg_regress: could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 128.071944] postgres[1554]: [1554] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 128.075048] postgres[1554]: [1554] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 128.077341] postgres[1554]: [1554] STATEMENT: select vm-test-run-wal2json> server # [ 128.078822] postgres[1554]: 1 vm-test-run-wal2json> server # [ 128.080013] postgres[1554]: from vm-test-run-wal2json> server # [ 128.082521] postgres[1554]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 128.142549] postgres[1554]: [1554] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 128.145416] postgres[1554]: [1554] DETAIL: Streaming transactions committing after 0/152AC80, reading WAL from 0/152AC48. vm-test-run-wal2json> server # [ 128.147609] postgres[1554]: [1554] STATEMENT: select vm-test-run-wal2json> server # [ 128.149132] postgres[1554]: data vm-test-run-wal2json> server # [ 128.150268] postgres[1554]: from vm-test-run-wal2json> server # [ 128.151006] postgres[1554]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 128.151520] postgres[1554]: 'reg_test', vm-test-run-wal2json> server # [ 128.151954] postgres[1554]: null, vm-test-run-wal2json> server # [ 128.153722] postgres[1554]: null, vm-test-run-wal2json> server # [ 128.154792] postgres[1554]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 128.158839] postgres[1554]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 128.159872] postgres[1554]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 128.161401] postgres[1554]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 128.162103] postgres[1554]: 'format-version', '2', vm-test-run-wal2json> server # [ 128.162873] postgres[1554]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 128.163431] postgres[1554]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 128.164075] postgres[1554]: ) x; vm-test-run-wal2json> server # [ 128.165194] postgres[1554]: [1554] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 128.165824] postgres[1554]: [1554] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 128.166538] postgres[1554]: [1554] STATEMENT: select vm-test-run-wal2json> server # [ 128.169432] postgres[1554]: data vm-test-run-wal2json> server # [ 128.170818] postgres[1554]: from vm-test-run-wal2json> server # [ 128.171881] postgres[1554]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 128.172884] postgres[1554]: 'reg_test', vm-test-run-wal2json> server # [ 128.173222] postgres[1554]: null, vm-test-run-wal2json> server # [ 128.173608] postgres[1554]: null, vm-test-run-wal2json> server # [ 128.174082] postgres[1554]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 128.174482] postgres[1554]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 128.174814] postgres[1554]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 128.175392] postgres[1554]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 128.178829] postgres[1554]: 'format-version', '2', vm-test-run-wal2json> server # [ 128.181464] postgres[1554]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 128.182649] postgres[1554]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 128.182949] postgres[1554]: ) x; vm-test-run-wal2json> server # [ 128.637085] sudo[1538]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" , in 2.55 seconds) vm-test-run-wal2json> (using postmaster on Unix socket, default port) vm-test-run-wal2json> ============== running regression test queries ============== vm-test-run-wal2json> test wal2json ... ok 708 ms vm-test-run-wal2json> vm-test-run-wal2json> ===================== vm-test-run-wal2json> All 1 tests passed. vm-test-run-wal2json> ===================== vm-test-run-wal2json> vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 15 after extension upgrade, in 2.55 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.73 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.66 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.47 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.86 seconds) vm-test-run-wal2json> subtest: switch to postgresql 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 139.760052] nixos[1593]: switching to system configuration /nix/store/sxd6kadjcgrv4ya7j21ygamx4w1imjyv-nixos-system-server-test vm-test-run-wal2json> server # [ 139.783314] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 139.786827] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 139.798227] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 139.809613] postgres[1422]: [1422] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 139.810994] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 139.828772] postgres[1422]: [1422] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 139.917622] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 139.930048] postgres[1422]: [1422] LOG: background worker "logical replication launcher" (PID 1444) exited with exit code 1 vm-test-run-wal2json> server # [ 139.952424] postgres[1436]: [1436] LOG: shutting down vm-test-run-wal2json> server # [ 139.962224] postgres[1436]: [1436] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 139.964276] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 140.142812] postgres[1436]: [1436] LOG: checkpoint complete: wrote 54 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.051 s, sync=0.081 s, total=0.210 s; sync files=48, longest=0.017 s, average=0.002 s; distance=149 kB, estimate=149 kB vm-test-run-wal2json> server # [ 140.192288] postgres[1422]: [1422] LOG: database system is shut down vm-test-run-wal2json> server # [ 140.258069] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 140.266195] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # [ 140.273277] systemd[1]: postgresql.service: Consumed 21.595s CPU time, 91.2M memory peak, 45.9M written to disk. vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 148.137132] systemd[1]: Reload requested from client PID 1593 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 148.155979] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 154.519976] systemd[1]: Reloading finished in 6358 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 154.997774] systemd[1]: Starting Re-setup tmpfiles on a system that is already running.... vm-test-run-wal2json> server # [ 156.545732] systemd[1]: Finished Re-setup tmpfiles on a system that is already running.. vm-test-run-wal2json> server # [ 156.549666] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 156.629030] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 157.279241] dbus-daemon[632]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 157.569639] dbus-daemon[632]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 157.585480] dbus-send[1793]: method return time=1793017437.063396 sender=org.freedesktop.DBus -> destination=:1.5 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 157.799763] dbus-daemon[632]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 158.083057] dbus-daemon[632]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 158.098727] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 158.217813] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 158.246543] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 158.301974] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 158.331518] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 158.390195] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 158.391874] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 158.815459] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 158.822207] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 158.950925] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 158.979857] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 159.005475] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 159.029426] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 159.039397] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 159.040068] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 159.052045] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 159.054572] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 160.789031] postgresql-migrate-start[1822]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 160.802220] postgresql-migrate-start[1822]: This user must also own the server process. vm-test-run-wal2json> server # [ 160.895679] postgresql-migrate-start[1822]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 160.900763] postgresql-migrate-start[1822]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 160.906085] postgresql-migrate-start[1822]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 160.907172] postgresql-migrate-start[1822]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 160.917765] postgresql-migrate-start[1822]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 160.939084] postgresql-migrate-start[1822]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 160.945626] postgresql-migrate-start[1822]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 162.533078] postgresql-migrate-start[1822]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 163.634606] postgresql-migrate-start[1822]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 167.275717] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 167.283423] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 167.311887] systemd[1]: suid-sgid-wrappers.service: Consumed 3.250s CPU time, 3.2M memory peak. vm-test-run-wal2json> server # [ 175.426392] postgresql-migrate-start[1822]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 175.478431] postgresql-migrate-start[1822]: creating configuration files ... ok vm-test-run-wal2json> server # [ 179.502505] postgresql-migrate-start[1822]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 179.889867] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:08.0/virtio7/input/input3 vm-test-run-wal2json> server # [ 188.971916] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-wal2json> server # [ 189.221604] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 189.406216] postgresql-migrate-start[1822]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 189.537457] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 189.568843] systemd[1]: Stopped Virtual Console Setup. vm-test-run-wal2json> server # [ 189.633518] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 192.904884] postgresql-migrate-start[1822]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 192.907718] postgresql-migrate-start[1822]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 192.910705] postgresql-migrate-start[1822]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 192.911457] postgresql-migrate-start[1822]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 192.915242] postgresql-migrate-start[1822]: /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 194.890905] systemd-logind[654]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-wal2json> server # [ 195.801860] systemd[1]: Finished Virtual Console Setup. vm-test-run-wal2json> server # [ 198.607455] postgresql-migrate-start[2096]: Performing Consistency Checks vm-test-run-wal2json> server # [ 198.611236] postgresql-migrate-start[2096]: ----------------------------- vm-test-run-wal2json> server # [ 198.615297] postgresql-migrate-start[2096]: Checking cluster versions ok vm-test-run-wal2json> server # [ 201.011235] postgresql-migrate-start[2096]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 201.053071] postgresql-migrate-start[2096]: Checking database connection settings ok vm-test-run-wal2json> server # [ 201.121171] postgresql-migrate-start[2096]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 201.122921] postgresql-migrate-start[2096]: Checking for contrib/isn with bigint-passing mismatch ok vm-test-run-wal2json> server # [ 201.705434] postgresql-migrate-start[2096]: Checking data type usage ok vm-test-run-wal2json> server # [ 201.873707] postgresql-migrate-start[2096]: Checking for not-null constraint inconsistencies ok vm-test-run-wal2json> server # [ 202.459865] postgresql-migrate-start[2096]: Creating dump of global objects ok vm-test-run-wal2json> server # [ 204.453583] postgresql-migrate-start[2096]: Creating dump of database schemas ok vm-test-run-wal2json> server # [ 206.607195] postgresql-migrate-start[2096]: Checking for presence of required libraries ok vm-test-run-wal2json> server # [ 206.675399] postgresql-migrate-start[2096]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 206.745641] postgresql-migrate-start[2096]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 206.746916] postgresql-migrate-start[2096]: Checking for new cluster tablespace directories ok vm-test-run-wal2json> server # [ 206.747574] postgresql-migrate-start[2096]: If pg_upgrade fails after this point, you must re-initdb the vm-test-run-wal2json> server # [ 206.754016] postgresql-migrate-start[2096]: new cluster before continuing. vm-test-run-wal2json> server # [ 206.761629] postgresql-migrate-start[2096]: Performing Upgrade vm-test-run-wal2json> server # [ 206.765465] postgresql-migrate-start[2096]: ------------------ vm-test-run-wal2json> server # [ 206.801843] postgresql-migrate-start[2096]: Setting locale and encoding for new cluster ok vm-test-run-wal2json> server # [ 208.971163] postgresql-migrate-start[2096]: Analyzing all rows in the new cluster ok vm-test-run-wal2json> server # [ 210.026837] postgresql-migrate-start[2096]: Freezing all rows in the new cluster ok vm-test-run-wal2json> server # [ 210.334519] postgresql-migrate-start[2096]: Deleting files from new pg_xact ok vm-test-run-wal2json> server # [ 210.502418] postgresql-migrate-start[2096]: Copying old pg_xact to new server ok vm-test-run-wal2json> server # [ 210.821099] postgresql-migrate-start[2096]: Setting oldest XID for new cluster ok vm-test-run-wal2json> server # [ 211.767195] postgresql-migrate-start[2096]: Setting next transaction ID and epoch for new cluster ok vm-test-run-wal2json> server # [ 211.770044] postgresql-migrate-start[2096]: Deleting files from new pg_multixact/offsets ok vm-test-run-wal2json> server # [ 211.900152] postgresql-migrate-start[2096]: Copying old pg_multixact/offsets to new server ok vm-test-run-wal2json> server # [ 211.902829] postgresql-migrate-start[2096]: Deleting files from new pg_multixact/members ok vm-test-run-wal2json> server # [ 212.039666] postgresql-migrate-start[2096]: Copying old pg_multixact/members to new server ok vm-test-run-wal2json> server # [ 212.347152] postgresql-migrate-start[2096]: Setting next multixact ID and offset for new cluster ok vm-test-run-wal2json> server # [ 212.640124] postgresql-migrate-start[2096]: Resetting WAL archives ok vm-test-run-wal2json> server # [ 214.184234] postgresql-migrate-start[2096]: Setting frozenxid and minmxid counters in new cluster ok vm-test-run-wal2json> server # [ 214.562790] postgresql-migrate-start[2096]: Restoring global objects in the new cluster ok vm-test-run-wal2json> server # [ 216.435096] postgresql-migrate-start[2096]: Restoring database schemas in the new cluster ok vm-test-run-wal2json> server # [ 217.097712] postgresql-migrate-start[2096]: Copying user relation files ok vm-test-run-wal2json> server # [ 217.411598] postgresql-migrate-start[2096]: Setting next OID for new cluster ok vm-test-run-wal2json> server # [ 219.044919] postgresql-migrate-start[2096]: Sync data directory to disk ok vm-test-run-wal2json> server # [ 219.047651] postgresql-migrate-start[2096]: Creating script to delete old cluster ok vm-test-run-wal2json> server # [ 221.125601] postgresql-migrate-start[2096]: Checking for extension updates ok vm-test-run-wal2json> server # [ 221.399270] postgresql-migrate-start[2096]: Upgrade Complete vm-test-run-wal2json> server # [ 221.401504] postgresql-migrate-start[2096]: ---------------- vm-test-run-wal2json> server # [ 221.401978] postgresql-migrate-start[2096]: Optimizer statistics are not transferred by pg_upgrade. vm-test-run-wal2json> server # [ 221.403008] postgresql-migrate-start[2096]: Once you start the new server, consider running: vm-test-run-wal2json> server # [ 221.404535] postgresql-migrate-start[2096]: /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/bin/vacuumdb --all --analyze-in-stages vm-test-run-wal2json> server # [ 221.406928] postgresql-migrate-start[2096]: Running this script will delete the old cluster's data files: vm-test-run-wal2json> server # [ 221.408389] postgresql-migrate-start[2096]: ./delete_old_cluster.sh vm-test-run-wal2json> server # [ 221.451865] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 221.502417] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 222.963348] postgres[2273]: [2273] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 222.967769] postgres[2273]: [2273] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 222.969570] postgres[2273]: [2273] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 222.983956] postgres[2273]: [2273] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 223.057655] postgres[2279]: [2279] LOG: database system was shut down at 2026-10-26 12:25:00 GMT vm-test-run-wal2json> server # [ 223.132161] postgres[2273]: [2273] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 223.173260] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 223.212317] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 224.086090] postgresql-setup-start[2289]: ALTER ROLE vm-test-run-wal2json> server # [ 224.142916] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 224.157761] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # the following new units were started: postgresql-migrate.service, sys-devices-platform-4010000000.pcie-pci0000:00-0000:00:0b.0-virtio9-virtio\x2dports-vport9p0.device, sys-devices-virtual-input-mice.device, sys-devices-virtual-misc-rfkill.device, sys-devices-virtual-misc-tun.device, sys-devices-virtual-mtd-mtd0ro.device, sysinit-reactivation.target, systemd-rfkill.socket, systemd-tmpfiles-resetup.service, systemd-vconsole-setup.service vm-test-run-wal2json> server # [ 224.458815] nixos[1593]: finished switching to system configuration /nix/store/sxd6kadjcgrv4ya7j21ygamx4w1imjyv-nixos-system-server-test vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 0.81 seconds) vm-test-run-wal2json> server: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no' vm-test-run-wal2json> server: (finished: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no', in 0.16 seconds) vm-test-run-wal2json> (finished: subtest: switch to postgresql 17, in 94.88 seconds) vm-test-run-wal2json> subtest: Check last version of the extension after postgresql upgrade vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.38 seconds) vm-test-run-wal2json> (finished: subtest: Check last version of the extension after postgresql upgrade, in 0.38 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.41 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.44 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.40 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 17, in 1.24 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 227.488091] sudo[2315]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 227.628437] sudo[2315]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 228.118572] postgres[2322]: [2322] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 228.119451] postgres[2322]: [2322] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 228.120305] postgres[2322]: [2322] STATEMENT: select vm-test-run-wal2json> server # [ 228.122016] postgres[2322]: 1 vm-test-run-wal2json> server # [ 228.122466] postgres[2322]: from vm-test-run-wal2json> server # [ 228.122735] postgres[2322]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 228.159735] postgres[2322]: [2322] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 228.161354] postgres[2322]: [2322] DETAIL: Streaming transactions committing after 0/8034ED0, reading WAL from 0/8034E98. vm-test-run-wal2json> server # [ 228.162256] postgres[2322]: [2322] STATEMENT: select vm-test-run-wal2json> server # [ 228.163308] postgres[2322]: data vm-test-run-wal2json> server # [ 228.163617] postgres[2322]: from vm-test-run-wal2json> server # [ 228.163850] postgres[2322]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 228.166000] postgres[2322]: 'reg_test', vm-test-run-wal2json> server # [ 228.167309] postgres[2322]: null, vm-test-run-wal2json> server # [ 228.167667] postgres[2322]: null, vm-test-run-wal2json> server # [ 228.167929] postgres[2322]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 228.169066] postgres[2322]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 228.169930] postgres[2322]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 228.170591] postgres[2322]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 228.170991] postgres[2322]: 'format-version', '2', vm-test-run-wal2json> server # [ 228.171389] postgres[2322]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 228.172162] postgres[2322]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 228.174002] postgres[2322]: ) x; vm-test-run-wal2json> server # [ 228.174740] postgres[2322]: [2322] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 228.175672] postgres[2322]: [2322] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 228.176700] postgres[2322]: [2322] STATEMENT: select vm-test-run-wal2json> server # [ 228.178199] postgres[2322]: data vm-test-run-wal2json> server # [ 228.178754] postgres[2322]: from vm-test-run-wal2json> server # [ 228.179042] postgres[2322]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 228.179424] postgres[2322]: 'reg_test', vm-test-run-wal2json> server # [ 228.179692] postgres[2322]: null, vm-test-run-wal2json> server # [ 228.179939] postgres[2322]: null, vm-test-run-wal2json> server # [ 228.180167] postgres[2322]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 228.180407] postgres[2322]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 228.181503] postgres[2322]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 228.182649] postgres[2322]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 228.182953] postgres[2322]: 'format-version', '2', vm-test-run-wal2json> server # [ 228.183208] postgres[2322]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 228.183471] postgres[2322]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 228.183758] postgres[2322]: ) x; vm-test-run-wal2json> server # [ 228.430716] sudo[2315]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.38 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 513 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after extension upgrade, in 1.38 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.34 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.37 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.36 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.07 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 229.861735] sudo[2337]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 229.989899] sudo[2337]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 230.424107] postgres[2344]: [2344] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 230.426510] postgres[2344]: [2344] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 230.429011] postgres[2344]: [2344] STATEMENT: select vm-test-run-wal2json> server # [ 230.430069] postgres[2344]: 1 vm-test-run-wal2json> server # [ 230.430805] postgres[2344]: from vm-test-run-wal2json> server # [ 230.431084] postgres[2344]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 230.461159] postgres[2344]: [2344] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 230.462433] postgres[2344]: [2344] DETAIL: Streaming transactions committing after 0/803B920, reading WAL from 0/803B8E8. vm-test-run-wal2json> server # [ 230.463166] postgres[2344]: [2344] STATEMENT: select vm-test-run-wal2json> server # [ 230.463831] postgres[2344]: data vm-test-run-wal2json> server # [ 230.464147] postgres[2344]: from vm-test-run-wal2json> server # [ 230.464704] postgres[2344]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 230.466001] postgres[2344]: 'reg_test', vm-test-run-wal2json> server # [ 230.466575] postgres[2344]: null, vm-test-run-wal2json> server # [ 230.466938] postgres[2344]: null, vm-test-run-wal2json> server # [ 230.467174] postgres[2344]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 230.468148] postgres[2344]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 230.470841] postgres[2344]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 230.473434] postgres[2344]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 230.474099] postgres[2344]: 'format-version', '2', vm-test-run-wal2json> server # [ 230.474571] postgres[2344]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 230.474856] postgres[2344]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 230.475124] postgres[2344]: ) x; vm-test-run-wal2json> server # [ 230.475523] postgres[2344]: [2344] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 230.475820] postgres[2344]: [2344] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 230.476069] postgres[2344]: [2344] STATEMENT: select vm-test-run-wal2json> server # [ 230.477610] postgres[2344]: data vm-test-run-wal2json> server # [ 230.477944] postgres[2344]: from vm-test-run-wal2json> server # [ 230.478223] postgres[2344]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 230.478520] postgres[2344]: 'reg_test', vm-test-run-wal2json> server # [ 230.478987] postgres[2344]: null, vm-test-run-wal2json> server # [ 230.479576] postgres[2344]: null, vm-test-run-wal2json> server # [ 230.479871] postgres[2344]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 230.480207] postgres[2344]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 230.483803] postgres[2344]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 230.485389] postgres[2344]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 230.485719] postgres[2344]: 'format-version', '2', vm-test-run-wal2json> server # [ 230.486012] postgres[2344]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 230.486935] postgres[2344]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 230.487657] postgres[2344]: ) x; vm-test-run-wal2json> server # [ 230.718060] sudo[2337]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.22 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 456 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after installing the last version, in 1.22 seconds) vm-test-run-wal2json> subtest: switch to orioledb 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 237.089791] nixos[2351]: switching to system configuration /nix/store/x92yg82an9wrih717zwlv5qkx2r8n04s-nixos-system-server-test vm-test-run-wal2json> server # [ 237.103056] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 237.124847] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 237.125741] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 237.126873] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 237.134858] postgres[2273]: [2273] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 237.135783] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 237.156861] postgres[2273]: [2273] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 237.197122] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 237.225437] postgres[2273]: [2273] LOG: background worker "logical replication launcher" (PID 2282) exited with exit code 1 vm-test-run-wal2json> server # [ 237.247897] postgres[2277]: [2277] LOG: shutting down vm-test-run-wal2json> server # [ 237.254090] postgres[2277]: [2277] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 237.399132] postgres[2277]: [2277] LOG: checkpoint complete: wrote 57 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.034 s, sync=0.054 s, total=0.157 s; sync files=45, longest=0.013 s, average=0.002 s; distance=242 kB, estimate=242 kB; lsn=0/803C9C0, redo lsn=0/803C9C0 vm-test-run-wal2json> server # [ 237.438794] postgres[2273]: [2273] LOG: database system is shut down vm-test-run-wal2json> server # [ 237.496932] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 237.504831] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 237.512814] systemd[1]: postgresql.service: Consumed 2.323s CPU time, 22.2M memory peak, 264K written to disk. vm-test-run-wal2json> server # [ 237.551560] systemd[1]: postgresql-migrate.service: Deactivated successfully. vm-test-run-wal2json> server # [ 237.556836] systemd[1]: Stopped postgresql-migrate.service. vm-test-run-wal2json> server # [ 237.561206] systemd[1]: postgresql-migrate.service: Consumed 36.296s CPU time, 96.9M memory peak, 173.1M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 242.079974] systemd[1]: Reload requested from client PID 2351 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 242.087776] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 248.227262] systemd[1]: Reloading finished in 6126 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 248.538500] systemd[1]: Stopped target Reactivate sysinit units. vm-test-run-wal2json> server # [ 248.541882] systemd[1]: Stopping Reactivate sysinit units... vm-test-run-wal2json> server # [ 248.542850] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 248.581840] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 248.903645] dbus-daemon[632]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 249.056571] dbus-daemon[632]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 249.063738] dbus-send[2427]: method return time=1793017528.551995 sender=org.freedesktop.DBus -> destination=:1.7 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 249.165100] dbus-daemon[632]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 249.322949] dbus-daemon[632]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 249.339661] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # starting the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 249.394556] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 249.422552] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 249.461515] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 249.543154] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 249.581051] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 249.583907] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 249.606680] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 249.608654] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 249.612343] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 249.614268] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 249.615187] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 249.618636] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 249.744239] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 250.567108] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 253.622654] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 253.632805] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 253.636326] systemd[1]: suid-sgid-wrappers.service: Consumed 1.860s CPU time, 3.4M memory peak. vm-test-run-wal2json> server # [ 253.675843] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 253.732842] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 253.735052] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 253.993841] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 254.003813] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 255.163507] postgresql-pre-start[2510]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 255.168320] postgresql-pre-start[2510]: This user must also own the server process. vm-test-run-wal2json> server # [ 255.240306] postgresql-pre-start[2510]: Using language tag "en-US" for ICU locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 255.242653] postgresql-pre-start[2510]: The database cluster will be initialized with this locale configuration: vm-test-run-wal2json> server # [ 255.245131] postgresql-pre-start[2510]: locale provider: icu vm-test-run-wal2json> server # [ 255.245972] postgresql-pre-start[2510]: default collation: en-US vm-test-run-wal2json> server # [ 255.246987] postgresql-pre-start[2510]: LC_COLLATE: en_US.UTF-8 vm-test-run-wal2json> server # [ 255.247330] postgresql-pre-start[2510]: LC_CTYPE: en_US.UTF-8 vm-test-run-wal2json> server # [ 255.248059] postgresql-pre-start[2510]: LC_MESSAGES: en_US.UTF-8 vm-test-run-wal2json> server # [ 255.249669] postgresql-pre-start[2510]: LC_MONETARY: en_US.UTF-8 vm-test-run-wal2json> server # [ 255.250564] postgresql-pre-start[2510]: LC_NUMERIC: en_US.UTF-8 vm-test-run-wal2json> server # [ 255.251948] postgresql-pre-start[2510]: LC_TIME: en_US.UTF-8 vm-test-run-wal2json> server # [ 255.255013] postgresql-pre-start[2510]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 255.255560] postgresql-pre-start[2510]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 255.255898] postgresql-pre-start[2510]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 255.259142] postgresql-pre-start[2510]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 255.261387] postgresql-pre-start[2510]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 255.937384] postgresql-pre-start[2510]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 256.418073] postgresql-pre-start[2510]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 263.318090] postgresql-pre-start[2510]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 263.338676] postgresql-pre-start[2510]: creating configuration files ... ok vm-test-run-wal2json> server # [ 265.543611] postgresql-pre-start[2510]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 270.939276] postgresql-pre-start[2510]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 272.353927] postgresql-pre-start[2510]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 272.355616] postgresql-pre-start[2510]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 272.357749] postgresql-pre-start[2510]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 272.358646] postgresql-pre-start[2510]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 272.359629] postgresql-pre-start[2510]: /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 273.470800] postgres[2523]: [2523] LOG: registered custom resource manager "OrioleDB resource manager" with ID 129 vm-test-run-wal2json> server # [ 273.800938] postgres[2523]: [2523] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 273.865876] postgres[2523]: [2523] LOG: listening on IPv6 address "::1", port 5432 vm-test-run-wal2json> server # [ 273.869246] postgres[2523]: [2523] LOG: listening on IPv4 address "127.0.0.1", port 5432 vm-test-run-wal2json> server # [ 273.881138] postgres[2523]: [2523] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 273.971340] postgres[2529]: [2529] LOG: Cleanup of old files at startup. Checkpoint 0 vm-test-run-wal2json> server # [ 273.973708] postgres[2529]: [2529] LOG: database system was shut down at 2026-10-26 12:25:50 GMT vm-test-run-wal2json> server # [ 273.979011] postgres[2530]: [2530] LOG: orioledb background writer 0 started vm-test-run-wal2json> server # [ 274.059047] postgres[2523]: [2523] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 274.088015] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 274.126162] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 275.295677] postgresql-setup-start[2537]: CREATE EXTENSION vm-test-run-wal2json> server # [ 275.745835] postgresql-setup-start[2543]: CREATE ROLE vm-test-run-wal2json> server # [ 275.931656] postgresql-setup-start[2545]: ALTER ROLE vm-test-run-wal2json> server # [ 275.985825] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 275.999120] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 276.294536] nixos[2351]: finished switching to system configuration /nix/store/x92yg82an9wrih717zwlv5qkx2r8n04s-nixos-system-server-test vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" , in 0.37 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.35 seconds) vm-test-run-wal2json> (finished: subtest: switch to orioledb 17, in 46.30 seconds) vm-test-run-wal2json> subtest: Check upgrade path with orioledb 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.36 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.43 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.34 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with orioledb 17, in 1.13 seconds) vm-test-run-wal2json> subtest: Check pg_regress with orioledb 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" vm-test-run-wal2json> server # [ 278.555290] sudo[2568]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 wal2json vm-test-run-wal2json> server # [ 278.690593] sudo[2568]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 279.283929] postgres[2575]: [2575] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 279.286606] postgres[2575]: [2575] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 279.287456] postgres[2575]: [2575] STATEMENT: select vm-test-run-wal2json> server # [ 279.287875] postgres[2575]: 1 vm-test-run-wal2json> server # [ 279.288259] postgres[2575]: from vm-test-run-wal2json> server # [ 279.289687] postgres[2575]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 279.339947] postgres[2575]: [2575] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 279.342795] postgres[2575]: [2575] DETAIL: Streaming transactions committing after 0/15908A0, reading WAL from 0/1590850. vm-test-run-wal2json> server # [ 279.343311] postgres[2575]: [2575] STATEMENT: select vm-test-run-wal2json> server # [ 279.344883] postgres[2575]: data vm-test-run-wal2json> server # [ 279.345389] postgres[2575]: from vm-test-run-wal2json> server # [ 279.346343] postgres[2575]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 279.347869] postgres[2575]: 'reg_test', vm-test-run-wal2json> server # [ 279.350247] postgres[2575]: null, vm-test-run-wal2json> server # [ 279.350760] postgres[2575]: null, vm-test-run-wal2json> server # [ 279.351304] postgres[2575]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 279.352105] postgres[2575]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 279.353593] postgres[2575]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 279.354847] postgres[2575]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 279.355263] postgres[2575]: 'format-version', '2', vm-test-run-wal2json> server # [ 279.355553] postgres[2575]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 279.356023] postgres[2575]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 279.357788] postgres[2575]: ) x; vm-test-run-wal2json> server # [ 279.359304] postgres[2575]: [2575] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 279.359688] postgres[2575]: [2575] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 279.360079] postgres[2575]: [2575] STATEMENT: select vm-test-run-wal2json> server # [ 279.360357] postgres[2575]: data vm-test-run-wal2json> server # [ 279.360957] postgres[2575]: from vm-test-run-wal2json> server # [ 279.362425] postgres[2575]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 279.363312] postgres[2575]: 'reg_test', vm-test-run-wal2json> server # [ 279.363939] postgres[2575]: null, vm-test-run-wal2json> server # [ 279.364876] postgres[2575]: null, vm-test-run-wal2json> server # [ 279.365154] postgres[2575]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 279.365423] postgres[2575]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 279.365676] postgres[2575]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 279.365924] postgres[2575]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 279.366548] postgres[2575]: 'format-version', '2', vm-test-run-wal2json> server # [ 279.367399] postgres[2575]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 279.367710] postgres[2575]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 279.367968] postgres[2575]: ) x; vm-test-run-wal2json> server # [ 279.643113] sudo[2568]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cc1sqswgspxkbsnx1dyf3rx7h9s1m1s7-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" , in 1.50 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 670 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with orioledb 17 after installing the last version, in 1.50 seconds) vm-test-run-wal2json> (finished: run the VM test script, in 280.76 seconds) vm-test-run-wal2json> test script finished in 281.10s vm-test-run-wal2json> cleanup vm-test-run-wal2json> kill machine (pid 9) vm-test-run-wal2json> qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/y88crn50yx35fiiwcjx6xqwi6ahk7mlq-python3-3.13.11/bin/python3.13) vm-test-run-wal2json> vde_switch: EOF data port: Interrupted system call vm-test-run-wal2json> kill vlan (pid 7) vm-test-run-wal2json> (finished: cleanup, in 0.01 seconds) vm-test-run-wal2json> vde_switch: Caught signal 15, cleaning up and exiting