these 2 derivations will be built: /nix/store/x5h55wgiv1lsa4zg2yy6pqlxy40106ak-nixos-test-driver-wal2json.drv /nix/store/4m3xcznswdzcpfd8i3aqvbj8c0psxxss-vm-test-run-wal2json.drv building '/nix/store/x5h55wgiv1lsa4zg2yy6pqlxy40106ak-nixos-test-driver-wal2json.drv' on 'ssh-ng://nixbot-remote-build@78.232.36.247' building '/nix/store/x5h55wgiv1lsa4zg2yy6pqlxy40106ak-nixos-test-driver-wal2json.drv' nixos-test-driver-wal2json> Running type check (enable/disable: config.skipTypeCheck) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck nixos-test-driver-wal2json> Success: no issues found in 1 source file nixos-test-driver-wal2json> additionally exposed symbols: nixos-test-driver-wal2json> , nixos-test-driver-wal2json> , nixos-test-driver-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug nixos-test-driver-wal2json> Linting test script (enable/disable: config.skipLint) nixos-test-driver-wal2json> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint building '/nix/store/4m3xcznswdzcpfd8i3aqvbj8c0psxxss-vm-test-run-wal2json.drv' on 'ssh-ng://builder@mac-linux-builder' building '/nix/store/4m3xcznswdzcpfd8i3aqvbj8c0psxxss-vm-test-run-wal2json.drv' vm-test-run-wal2json> Machine state will be reset. To keep it, pass --keep-vm-state vm-test-run-wal2json> start all VLans vm-test-run-wal2json> start vlan vm-test-run-wal2json> running vlan (pid 7; ctl /build/vde1.ctl) vm-test-run-wal2json> (finished: start all VLans, in 0.00 seconds) vm-test-run-wal2json> Test will time out and terminate in 3600 seconds vm-test-run-wal2json> run the VM test script vm-test-run-wal2json> additionally exposed symbols: vm-test-run-wal2json> server, vm-test-run-wal2json> vlan1, vm-test-run-wal2json> start_all, test_script, machines, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, Machine, t, debug vm-test-run-wal2json> Running tests for extension: wal2json vm-test-run-wal2json> start all VMs vm-test-run-wal2json> server: starting vm vm-test-run-wal2json> mke2fs 1.47.3 (8-Jul-2025) vm-test-run-wal2json> qemu-system-aarch64: Could not access KVM kernel module: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: failed to initialize kvm: No such file or directory vm-test-run-wal2json> qemu-system-aarch64: falling back to tcg vm-test-run-wal2json> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-wal2json> server # Formatting '/build/vm-state-server/tmp.iur8FgOIwd', fmt=raw size=1073741824 vm-test-run-wal2json> server # Discarding device blocks: 0/262144 done vm-test-run-wal2json> server: QEMU running (pid 9) vm-test-run-wal2json> (finished: start all VMs, in 0.22 seconds) vm-test-run-wal2json> server: waiting for unit multi-user.target vm-test-run-wal2json> server: waiting for the VM to finish booting vm-test-run-wal2json> server # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-wal2json> server # Filesystem UUID: f295bcf8-3363-4d01-9a51-5d46645c84c0 vm-test-run-wal2json> server # Superblock backups stored on blocks: vm-test-run-wal2json> server # 32768, 98304, 163840, 229376 vm-test-run-wal2json> server # vm-test-run-wal2json> server # Allocating group tables: 0/8 done vm-test-run-wal2json> server # Writing inode tables: 0/8 done vm-test-run-wal2json> server # Creating journal (8192 blocks): done vm-test-run-wal2json> server # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-wal2json> server # vm-test-run-wal2json> server # Virtualisation disk image created. vm-test-run-wal2json> server # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510] vm-test-run-wal2json> server # [ 0.000000] Linux version 6.12.63 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP Thu Dec 18 12:55:23 UTC 2025 vm-test-run-wal2json> server # [ 0.000000] KASLR enabled vm-test-run-wal2json> server # [ 0.000000] random: crng init done vm-test-run-wal2json> server # [ 0.000000] Machine model: linux,dummy-virt vm-test-run-wal2json> server # [ 0.000000] efi: UEFI not found. vm-test-run-wal2json> server # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT vm-test-run-wal2json> server # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] NODE_DATA(0) allocated [mem 0x13f602200-0x13f60593f] vm-test-run-wal2json> server # [ 0.000000] Zone ranges: vm-test-run-wal2json> server # [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] vm-test-run-wal2json> server # [ 0.000000] DMA32 empty vm-test-run-wal2json> server # [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Device empty vm-test-run-wal2json> server # [ 0.000000] Movable zone start for each node vm-test-run-wal2json> server # [ 0.000000] Early memory node ranges vm-test-run-wal2json> server # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] vm-test-run-wal2json> server # [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 vm-test-run-wal2json> server # [ 0.000000] psci: probing for conduit method from DT. vm-test-run-wal2json> server # [ 0.000000] psci: PSCIv1.1 detected in firmware. vm-test-run-wal2json> server # [ 0.000000] psci: Using standard PSCI v0.2 function IDs vm-test-run-wal2json> server # [ 0.000000] psci: Trusted OS migration not required vm-test-run-wal2json> server # [ 0.000000] psci: SMC Calling Convention v1.0 vm-test-run-wal2json> server # [ 0.000000] percpu: Embedded 88 pages/cpu s180056 r65536 d114856 u360448 vm-test-run-wal2json> server # [ 0.000000] Detected PIPT I-cache on CPU0 vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: GIC system register CPU interface vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: HCRX_EL2 register vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: 52-bit Virtual Addressing (LPA2) vm-test-run-wal2json> server # [ 0.000000] CPU features: detected: Spectre-v4 vm-test-run-wal2json> server # [ 0.000000] alternatives: applying boot alternatives vm-test-run-wal2json> server # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/j4gsgzj4fy9yqawqmf0pn2wmwcsvbzji-nixos-system-server-test/init regInfo=/nix/store/577mggvqsqhrz2z203rdc8ak48avlhrq-closure-info/registration console=ttyAMA0,115200n8 console=tty0 vm-test-run-wal2json> server # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/577mggvqsqhrz2z203rdc8ak48avlhrq-closure-info/registration", will be passed to user space. vm-test-run-wal2json> server # [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-wal2json> server # [ 0.000000] Fallback order for Node 0: 0 vm-test-run-wal2json> server # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 vm-test-run-wal2json> server # [ 0.000000] Policy zone: Normal vm-test-run-wal2json> server # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-wal2json> server # [ 0.000000] software IO TLB: area num 2. vm-test-run-wal2json> server # [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) vm-test-run-wal2json> server # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-wal2json> server # [ 0.000000] allocated 8388608 bytes of page_ext vm-test-run-wal2json> server # [ 0.000000] ftrace: allocating 72257 entries in 283 pages vm-test-run-wal2json> server # [ 0.000000] ftrace: allocated 283 pages with 5 groups vm-test-run-wal2json> server # [ 0.000000] rcu: Hierarchical RCU implementation. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU event tracing is enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] Rude variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] Tracing variant of Tasks RCU enabled. vm-test-run-wal2json> server # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. vm-test-run-wal2json> server # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-wal2json> server # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 vm-test-run-wal2json> server # [ 0.000000] GICv3: 256 SPIs implemented vm-test-run-wal2json> server # [ 0.000000] GICv3: 0 Extended SPIs implemented vm-test-run-wal2json> server # [ 0.000000] Root IRQ handler: gic_handle_irq vm-test-run-wal2json> server # [ 0.000000] GICv3: GICv3 features: 16 PPIs vm-test-run-wal2json> server # [ 0.000000] GICv3: GICD_CTRL.DS=1, SCR_EL3.FIQ=0 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 vm-test-run-wal2json> server # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @100ae0000 (indirect, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @100af0000 (flat, esz 8, psz 64K, shr 1) vm-test-run-wal2json> server # [ 0.000000] GICv3: using LPI property table @0x0000000100b00000 vm-test-run-wal2json> server # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100b10000 vm-test-run-wal2json> server # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-wal2json> server # [ 0.000000] arch_timer: cp15 timer(s) running at 1000.00MHz (virt). vm-test-run-wal2json> server # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-wal2json> server # [ 0.000041] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns vm-test-run-wal2json> server # [ 0.004921] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-wal2json> server # [ 0.015758] Console: colour dummy device 80x25 vm-test-run-wal2json> server # [ 0.017427] printk: legacy console [tty0] enabled vm-test-run-wal2json> server # [ 0.022781] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) vm-test-run-wal2json> server # [ 0.023421] pid_max: default: 32768 minimum: 301 vm-test-run-wal2json> server # [ 0.025412] LSM: initializing lsm=capability,landlock,yama,bpf vm-test-run-wal2json> server # [ 0.027948] landlock: Up and running. vm-test-run-wal2json> server # [ 0.028123] Yama: becoming mindful. vm-test-run-wal2json> server # [ 0.034379] LSM support for eBPF active vm-test-run-wal2json> server # [ 0.037347] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.037800] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.068142] cacheinfo: Unable to detect cache hierarchy for CPU 0 vm-test-run-wal2json> server # [ 0.080291] rcu: Hierarchical SRCU implementation. vm-test-run-wal2json> server # [ 0.080407] rcu: Max phase no-delay instances is 1000. vm-test-run-wal2json> server # [ 0.082598] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-wal2json> server # [ 0.090199] fsl-mc MSI: its@8080000 domain created vm-test-run-wal2json> server # [ 0.092646] EFI services will not be available. vm-test-run-wal2json> server # [ 0.094312] smp: Bringing up secondary CPUs ... vm-test-run-wal2json> server # [ 0.099360] Detected PIPT I-cache on CPU1 vm-test-run-wal2json> server # [ 0.100608] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000 vm-test-run-wal2json> server # [ 0.101297] GICv3: CPU1: using allocated LPI pending table @0x0000000100b20000 vm-test-run-wal2json> server # [ 0.102882] CPU1: Booted secondary processor 0x0000000001 [0x000f0510] vm-test-run-wal2json> server # [ 0.106564] smp: Brought up 1 node, 2 CPUs vm-test-run-wal2json> server # [ 0.106718] SMP: Total of 2 processors activated. vm-test-run-wal2json> server # [ 0.106760] CPU: All CPU(s) started at EL1 vm-test-run-wal2json> server # [ 0.106946] CPU features: detected: Branch Target Identification vm-test-run-wal2json> server # [ 0.107000] CPU features: detected: 32-bit EL0 Support vm-test-run-wal2json> server # [ 0.107103] CPU features: detected: 32-bit EL1 Support vm-test-run-wal2json> server # [ 0.107128] CPU features: detected: ARMv8.4 Translation Table Level vm-test-run-wal2json> server # [ 0.107158] CPU features: detected: Instruction cache invalidation not required for I/D coherence vm-test-run-wal2json> server # [ 0.107201] CPU features: detected: Data cache clean to the PoU not required for I/D coherence vm-test-run-wal2json> server # [ 0.107275] CPU features: detected: Common not Private translations vm-test-run-wal2json> server # [ 0.107305] CPU features: detected: CRC32 instructions vm-test-run-wal2json> server # [ 0.107330] CPU features: detected: Data cache clean to Point of Deep Persistence vm-test-run-wal2json> server # [ 0.107361] CPU features: detected: Data cache clean to Point of Persistence vm-test-run-wal2json> server # [ 0.107388] CPU features: detected: Data independent timing control (DIT) vm-test-run-wal2json> server # [ 0.107415] CPU features: detected: E0PD vm-test-run-wal2json> server # [ 0.107436] CPU features: detected: Enhanced Counter Virtualization vm-test-run-wal2json> server # [ 0.107461] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) vm-test-run-wal2json> server # [ 0.107486] CPU features: detected: Enhanced Privileged Access Never vm-test-run-wal2json> server # [ 0.107509] CPU features: detected: Enhanced Virtualization Traps vm-test-run-wal2json> server # [ 0.107530] CPU features: detected: Fine Grained Traps vm-test-run-wal2json> server # [ 0.107587] CPU features: detected: Generic authentication (IMP DEF algorithm) vm-test-run-wal2json> server # [ 0.107667] CPU features: detected: RCpc load-acquire (LDAPR) vm-test-run-wal2json> server # [ 0.107716] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2) vm-test-run-wal2json> server # [ 0.107744] CPU features: detected: LSE atomic instructions vm-test-run-wal2json> server # [ 0.107768] CPU features: detected: Memory Copy and Memory Set instructions vm-test-run-wal2json> server # [ 0.107796] CPU features: detected: Privileged Access Never vm-test-run-wal2json> server # [ 0.107824] CPU features: detected: RAS Extension Support vm-test-run-wal2json> server # [ 0.107850] CPU features: detected: Random Number Generator vm-test-run-wal2json> server # [ 0.107878] CPU features: detected: Speculation barrier (SB) vm-test-run-wal2json> server # [ 0.107902] CPU features: detected: Stage-2 Force Write-Back vm-test-run-wal2json> server # [ 0.107927] CPU features: detected: Trap EL0 IMPLEMENTATION DEFINED functionality vm-test-run-wal2json> server # [ 0.107958] CPU features: detected: TLB range maintenance instructions vm-test-run-wal2json> server # [ 0.107982] CPU features: detected: WFx with timeout vm-test-run-wal2json> server # [ 0.108024] CPU features: detected: Speculative Store Bypassing Safe (SSBS) vm-test-run-wal2json> server # [ 0.108051] CPU features: detected: Scalable Vector Extension vm-test-run-wal2json> server # [ 0.114859] alternatives: applying system-wide alternatives vm-test-run-wal2json> server # [ 0.131100] CPU features: detected: Hardware dirty bit management on CPU0-1 vm-test-run-wal2json> server # [ 0.131833] SVE: maximum available vector length 256 bytes per vector vm-test-run-wal2json> server # [ 0.131930] SVE: default vector length 64 bytes per vector vm-test-run-wal2json> server # [ 0.145732] Memory: 3922872K/4194304K available (23296K kernel code, 6546K rwdata, 24596K rodata, 4416K init, 1047K bss, 223164K reserved, 32768K cma-reserved) vm-test-run-wal2json> server # [ 0.169871] devtmpfs: initialized vm-test-run-wal2json> server # [ 0.197797] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns vm-test-run-wal2json> server # [ 0.198284] futex hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.201122] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL vm-test-run-wal2json> server # [ 0.201202] 0 pages in range for non-PLT usage vm-test-run-wal2json> server # [ 0.201246] 509248 pages in range for PLT usage vm-test-run-wal2json> server # [ 0.204020] pinctrl core: initialized pinctrl subsystem vm-test-run-wal2json> server # [ 0.214766] DMI not present or invalid. vm-test-run-wal2json> server # [ 0.233610] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-wal2json> server # [ 0.245771] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations vm-test-run-wal2json> server # [ 0.247110] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-wal2json> server # [ 0.248552] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-wal2json> server # [ 0.248813] audit: initializing netlink subsys (disabled) vm-test-run-wal2json> server # [ 0.251439] audit: type=2000 audit(0.204:1): state=initialized audit_enabled=0 res=1 vm-test-run-wal2json> server # [ 0.257357] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-wal2json> server # [ 0.257411] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-wal2json> server # [ 0.257464] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-wal2json> server # [ 0.257488] thermal_sys: Registered thermal governor 'user_space' vm-test-run-wal2json> server # [ 0.257514] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-wal2json> server # [ 0.258269] cpuidle: using governor ladder vm-test-run-wal2json> server # [ 0.258953] cpuidle: using governor menu vm-test-run-wal2json> server # [ 0.261939] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. vm-test-run-wal2json> server # [ 0.262880] ASID allocator initialised with 65536 entries vm-test-run-wal2json> server # [ 0.270916] Serial: AMBA PL011 UART driver vm-test-run-wal2json> server # [ 0.322301] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 vm-test-run-wal2json> server # [ 0.323868] printk: legacy console [ttyAMA0] enabled vm-test-run-wal2json> server # [ 0.356994] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.357188] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-wal2json> server # [ 0.357356] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.357471] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page vm-test-run-wal2json> server # [ 0.357601] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.357711] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-wal2json> server # [ 0.357806] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages vm-test-run-wal2json> server # [ 0.357910] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page vm-test-run-wal2json> server # [ 0.372121] fbcon: Taking over console vm-test-run-wal2json> server # [ 0.372731] ACPI: Interpreter disabled. vm-test-run-wal2json> server # [ 0.380625] iommu: Default domain type: Translated vm-test-run-wal2json> server # [ 0.380773] iommu: DMA domain TLB invalidation policy: strict mode vm-test-run-wal2json> server # [ 0.384122] SCSI subsystem initialized vm-test-run-wal2json> server # [ 0.387610] usbcore: registered new interface driver usbfs vm-test-run-wal2json> server # [ 0.388005] usbcore: registered new interface driver hub vm-test-run-wal2json> server # [ 0.388600] usbcore: registered new device driver usb vm-test-run-wal2json> server # [ 0.391853] pps_core: LinuxPPS API ver. 1 registered vm-test-run-wal2json> server # [ 0.391968] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti vm-test-run-wal2json> server # [ 0.392140] PTP clock support registered vm-test-run-wal2json> server # [ 0.392680] EDAC MC: Ver: 3.0.0 vm-test-run-wal2json> server # [ 0.394657] scmi_core: SCMI protocol bus registered vm-test-run-wal2json> server # [ 0.397850] FPGA manager framework vm-test-run-wal2json> server # [ 0.399457] Advanced Linux Sound Architecture Driver Initialized. vm-test-run-wal2json> server # [ 0.407904] vgaarb: loaded vm-test-run-wal2json> server # [ 0.412785] clocksource: Switched to clocksource arch_sys_counter vm-test-run-wal2json> server # [ 0.416945] VFS: Disk quotas dquot_6.6.0 vm-test-run-wal2json> server # [ 0.417181] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-wal2json> server # [ 0.420763] netfs: FS-Cache loaded vm-test-run-wal2json> server # [ 0.422157] pnp: PnP ACPI: disabled vm-test-run-wal2json> server # [ 0.446487] NET: Registered PF_INET protocol family vm-test-run-wal2json> server # [ 0.448417] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-wal2json> server # [ 0.564473] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-wal2json> server # [ 0.564855] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.565693] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-wal2json> server # [ 0.566704] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) vm-test-run-wal2json> server # [ 0.567488] TCP: Hash tables configured (established 32768 bind 32768) vm-test-run-wal2json> server # [ 0.569931] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear) vm-test-run-wal2json> server # [ 0.570528] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.571358] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) vm-test-run-wal2json> server # [ 0.573550] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-wal2json> server # [ 0.574022] NET: Registered PF_XDP protocol family vm-test-run-wal2json> server # [ 0.574528] PCI: CLS 0 bytes, default 64 vm-test-run-wal2json> server # [ 0.578223] kvm [1]: HYP mode not available vm-test-run-wal2json> server # [ 0.580225] Trying to unpack rootfs image as initramfs... vm-test-run-wal2json> server # [ 0.691352] Initialise system trusted keyrings vm-test-run-wal2json> server # [ 0.693464] workingset: timestamp_bits=42 max_order=20 bucket_order=0 vm-test-run-wal2json> server # [ 0.697629] squashfs: version 4.0 (2009/01/31) Phillip Lougher vm-test-run-wal2json> server # [ 0.698315] 9p: Installing v9fs 9p2000 file system support vm-test-run-wal2json> server # [ 0.762015] Key type asymmetric registered vm-test-run-wal2json> server # [ 0.762228] Asymmetric key parser 'x509' registered vm-test-run-wal2json> server # [ 0.762691] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) vm-test-run-wal2json> server # [ 0.764193] io scheduler mq-deadline registered vm-test-run-wal2json> server # [ 0.764588] io scheduler kyber registered vm-test-run-wal2json> server # [ 0.793780] pl061_gpio 9030000.pl061: PL061 GPIO chip registered vm-test-run-wal2json> server # [ 0.798254] ledtrig-cpu: registered to indicate activity on CPUs vm-test-run-wal2json> server # [ 0.802269] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: vm-test-run-wal2json> server # [ 0.802880] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 vm-test-run-wal2json> server # [ 0.803549] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 vm-test-run-wal2json> server # [ 0.803752] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 vm-test-run-wal2json> server # [ 0.804333] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits vm-test-run-wal2json> server # [ 0.804843] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] vm-test-run-wal2json> server # [ 0.807307] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 vm-test-run-wal2json> server # [ 0.807743] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-wal2json> server # [ 0.807908] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.808031] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.808134] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.809815] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.813231] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.813651] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.813791] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.814235] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.814561] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.815321] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.815678] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.815800] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.815910] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.816392] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.816543] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.817714] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.818035] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.818793] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.818962] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.819140] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.819246] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.819713] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.820029] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.820224] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.820405] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.821040] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.822014] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] vm-test-run-wal2json> server # [ 0.822117] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.822556] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.823446] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.823981] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.824440] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.824831] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.825274] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] vm-test-run-wal2json> server # [ 0.825857] pci 0000:00:08.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.826009] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.826118] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.826534] pci 0000:00:09.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.826683] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.826847] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.827564] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.827732] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.828149] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.828328] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] vm-test-run-wal2json> server # [ 0.828420] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.828906] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.830091] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-wal2json> server # [ 0.830245] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] vm-test-run-wal2json> server # [ 0.830334] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] vm-test-run-wal2json> server # [ 0.830440] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] vm-test-run-wal2json> server # [ 0.832363] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned vm-test-run-wal2json> server # [ 0.833703] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned vm-test-run-wal2json> server # [ 0.834000] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.834253] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.834949] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.835227] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.835362] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.835664] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.835798] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.835934] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.836057] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.836187] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.836337] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned vm-test-run-wal2json> server # [ 0.836465] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned vm-test-run-wal2json> server # [ 0.836892] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned vm-test-run-wal2json> server # [ 0.837018] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned vm-test-run-wal2json> server # [ 0.838029] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned vm-test-run-wal2json> server # [ 0.838164] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned vm-test-run-wal2json> server # [ 0.838287] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned vm-test-run-wal2json> server # [ 0.838401] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned vm-test-run-wal2json> server # [ 0.838503] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned vm-test-run-wal2json> server # [ 0.838609] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned vm-test-run-wal2json> server # [ 0.838723] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned vm-test-run-wal2json> server # [ 0.838831] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned vm-test-run-wal2json> server # [ 0.838937] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned vm-test-run-wal2json> server # [ 0.839218] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned vm-test-run-wal2json> server # [ 0.839514] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned vm-test-run-wal2json> server # [ 0.839618] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned vm-test-run-wal2json> server # [ 0.839719] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned vm-test-run-wal2json> server # [ 0.839834] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned vm-test-run-wal2json> server # [ 0.839935] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned vm-test-run-wal2json> server # [ 0.840032] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned vm-test-run-wal2json> server # [ 0.840144] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned vm-test-run-wal2json> server # [ 0.840244] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned vm-test-run-wal2json> server # [ 0.840535] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] vm-test-run-wal2json> server # [ 0.840653] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] vm-test-run-wal2json> server # [ 0.840747] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] vm-test-run-wal2json> server # [ 0.842097] pci 0000:00:0a.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.901585] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.907367] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.910277] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.913471] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.915629] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.918167] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.921591] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.924096] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.926969] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) vm-test-run-wal2json> server # [ 0.929565] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.933393] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) vm-test-run-wal2json> server # [ 0.950343] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-wal2json> server # [ 0.962002] msm_serial: driver initialized vm-test-run-wal2json> server # [ 0.964335] SuperH (H)SCI(F) driver initialized vm-test-run-wal2json> server # [ 0.965465] STM32 USART driver initialized vm-test-run-wal2json> server # [ 1.029278] loop: module loaded vm-test-run-wal2json> server # [ 1.030384] virtio_blk virtio5: 2/0/0 default/read/poll queues vm-test-run-wal2json> server # [ 1.035155] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-wal2json> server # [ 1.042804] Freeing initrd memory: 10684K vm-test-run-wal2json> server # [ 1.048587] megasas: 07.727.03.00-rc1 vm-test-run-wal2json> server # [ 1.055286] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] vm-test-run-wal2json> server # [ 1.059201] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.060134] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.063545] Using buffer write method vm-test-run-wal2json> server # [ 1.064200] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] vm-test-run-wal2json> server # [ 1.066504] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 vm-test-run-wal2json> server # [ 1.066815] Intel/Sharp Extended Query Table at 0x0031 vm-test-run-wal2json> server # [ 1.068426] Using buffer write method vm-test-run-wal2json> server # [ 1.068840] Concatenating MTD devices: vm-test-run-wal2json> server # [ 1.069510] (0): "0.flash" vm-test-run-wal2json> server # [ 1.069587] (1): "0.flash" vm-test-run-wal2json> server # [ 1.069689] into device "0.flash" vm-test-run-wal2json> server # [ 1.098474] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-wal2json> server # [ 1.113991] thunder_xcv, ver 1.0 vm-test-run-wal2json> server # [ 1.114272] thunder_bgx, ver 1.0 vm-test-run-wal2json> server # [ 1.114444] nicpf, ver 1.0 vm-test-run-wal2json> server # [ 1.117566] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version vm-test-run-wal2json> server # [ 1.117734] hns3: Copyright (c) 2017 Huawei Corporation. vm-test-run-wal2json> server # [ 1.118144] hclge is initializing vm-test-run-wal2json> server # [ 1.118361] e1000: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.118443] e1000: Copyright (c) 1999-2006 Intel Corporation. vm-test-run-wal2json> server # [ 1.118632] e1000e: Intel(R) PRO/1000 Network Driver vm-test-run-wal2json> server # [ 1.118708] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. vm-test-run-wal2json> server # [ 1.118904] igb: Intel(R) Gigabit Ethernet Network Driver vm-test-run-wal2json> server # [ 1.118988] igb: Copyright (c) 2007-2014 Intel Corporation. vm-test-run-wal2json> server # [ 1.119210] igbvf: Intel(R) Gigabit Virtual Function Network Driver vm-test-run-wal2json> server # [ 1.119301] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. vm-test-run-wal2json> server # [ 1.120013] sky2: driver version 1.30 vm-test-run-wal2json> server # [ 1.129044] ehci-pci 0000:00:0a.0: EHCI Host Controller vm-test-run-wal2json> server # [ 1.129758] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 vm-test-run-wal2json> server # [ 1.131836] usbcore: registered new interface driver usb-storage vm-test-run-wal2json> server # [ 1.132451] usbcore: registered new interface driver usbserial_generic vm-test-run-wal2json> server # [ 1.132844] usbserial: USB Serial support registered for generic vm-test-run-wal2json> server # [ 1.132850] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 vm-test-run-wal2json> server # [ 1.143400] rtc-pl031 9010000.pl031: registered as rtc0 vm-test-run-wal2json> server # [ 1.144057] rtc-pl031 9010000.pl031: setting system clock to 2026-10-07T23:52:19 UTC (1791417139) vm-test-run-wal2json> server # [ 1.145714] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 vm-test-run-wal2json> server # [ 1.146425] i2c_dev: i2c /dev entries driver vm-test-run-wal2json> server # [ 1.153904] hub 1-0:1.0: USB hub found vm-test-run-wal2json> server # [ 1.154500] hub 1-0:1.0: 6 ports detected vm-test-run-wal2json> server # [ 1.162547] sdhci: Secure Digital Host Controller Interface driver vm-test-run-wal2json> server # [ 1.162961] sdhci: Copyright(c) Pierre Ossman vm-test-run-wal2json> server # [ 1.165061] Synopsys Designware Multimedia Card Interface Driver vm-test-run-wal2json> server # [ 1.167001] sdhci-pltfm: SDHCI platform and OF driver helper vm-test-run-wal2json> server # [ 1.174081] hid: raw HID events driver (C) Jiri Kosina vm-test-run-wal2json> server # [ 1.176573] usbcore: registered new interface driver usbhid vm-test-run-wal2json> server # [ 1.177089] usbhid: USB HID core driver vm-test-run-wal2json> server # [ 1.185863] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available vm-test-run-wal2json> server # [ 1.201384] drop_monitor: Initializing network drop monitor service vm-test-run-wal2json> server # [ 1.202799] NET: Registered PF_INET6 protocol family vm-test-run-wal2json> server # [ 1.223854] Segment Routing with IPv6 vm-test-run-wal2json> server # [ 1.224174] In-situ OAM (IOAM) with IPv6 vm-test-run-wal2json> server # [ 1.224709] NET: Registered PF_PACKET protocol family vm-test-run-wal2json> server # [ 1.227698] 9pnet: Installing 9P2000 support vm-test-run-wal2json> server # [ 1.232345] Key type dns_resolver registered vm-test-run-wal2json> server # [ 1.267661] registered taskstats version 1 vm-test-run-wal2json> server # [ 1.270329] Loading compiled-in X.509 certificates vm-test-run-wal2json> server # [ 1.328564] Demotion targets for Node 0: null vm-test-run-wal2json> server # [ 1.331627] Key type .fscrypt registered vm-test-run-wal2json> server # [ 1.331783] Key type fscrypt-provisioning registered vm-test-run-wal2json> server # [ 1.340932] input: gpio-keys as /devices/platform/gpio-keys/input/input0 vm-test-run-wal2json> server # [ 1.387272] clk: Disabling unused clocks vm-test-run-wal2json> server # [ 1.387801] PM: genpd: Disabling unused power domains vm-test-run-wal2json> server # [ 1.388207] ALSA device list: vm-test-run-wal2json> server # [ 1.388810] No soundcards found. vm-test-run-wal2json> server # [ 1.413160] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-wal2json> server # [ 1.474341] Freeing unused kernel memory: 4416K vm-test-run-wal2json> server # [ 1.475827] Run /init as init process vm-test-run-wal2json> server # [ 1.606844] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 vm-test-run-wal2json> server # [ 1.756393] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 vm-test-run-wal2json> server # [ 1.881758] usb 1-2: new high-speed USB device number 3 using ehci-pci vm-test-run-wal2json> server # [ 2.056839] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 vm-test-run-wal2json> server # [ 2.058918] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 vm-test-run-wal2json> server # [ 2.121107] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev vm-test-run-wal2json> server # [ 2.267477] [drm] pci: virtio-gpu-pci detected at 0000:00:09.0 vm-test-run-wal2json> server # [ 2.268111] [drm] features: -virgl +edid -resource_blob -host_visible vm-test-run-wal2json> server # [ 2.268135] [drm] features: -context_init vm-test-run-wal2json> server # [ 2.270383] [drm] number of scanouts: 1 vm-test-run-wal2json> server # [ 2.270500] [drm] number of cap sets: 0 vm-test-run-wal2json> server # [ 2.281456] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:09.0 on minor 0 vm-test-run-wal2json> server # [ 2.316169] Console: switching to colour frame buffer device 160x50 vm-test-run-wal2json> server # [ 2.328584] virtio-pci 0000:00:09.0: [drm] fb0: virtio_gpudrmfb frame buffer device vm-test-run-wal2json> server # [ 5.313679] EXT4-fs (vda): mounted filesystem f295bcf8-3363-4d01-9a51-5d46645c84c0 r/w with ordered data mode. Quota mode: none. vm-test-run-wal2json> server # [ 7.717818] EXT4-fs (vda): re-mounted f295bcf8-3363-4d01-9a51-5d46645c84c0. vm-test-run-wal2json> server # [ 7.739075] booting system configuration /nix/store/j4gsgzj4fy9yqawqmf0pn2wmwcsvbzji-nixos-system-server-test vm-test-run-wal2json> server # [ 21.332500] systemd[1]: systemd 258.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) vm-test-run-wal2json> server # [ 21.343354] systemd[1]: Detected virtualization qemu. vm-test-run-wal2json> server # [ 21.348710] systemd[1]: Detected architecture arm64. vm-test-run-wal2json> server # [ 21.354472] systemd[1]: Detected first boot. vm-test-run-wal2json> server # [ 21.386887] systemd[1]: Initializing machine ID from random generator. vm-test-run-wal2json> server # [ 21.422996] systemd[1]: Hostname set to . vm-test-run-wal2json> server # [ 22.703788] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-wal2json> server # [ 24.254290] NET: Registered PF_VSOCK protocol family vm-test-run-wal2json> server # [ 24.327448] Guest personality initialized and is inactive vm-test-run-wal2json> server # [ 24.333451] VMCI host device registered (name=vmci, major=10, minor=261) vm-test-run-wal2json> server # [ 24.335999] Initialized host personality vm-test-run-wal2json> server # [ 24.589838] systemd[1]: Applying preset policy. vm-test-run-wal2json> server # [ 28.748148] systemd[1]: Populated /etc with preset unit settings. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 32.586827] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-wal2json> server # [ 32.825904] systemd[1]: Created slice Slice /system/getty. vm-test-run-wal2json> server # [ 32.843810] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-wal2json> server # [ 32.858644] systemd[1]: Created slice User and Session Slice. vm-test-run-wal2json> server # [ 32.866806] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-wal2json> server # [ 32.873603] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-wal2json> server # [ 32.879107] systemd[1]: Expecting device /dev/hvc0... vm-test-run-wal2json> server # [ 32.884683] systemd[1]: Expecting device /dev/ttyAMA0... vm-test-run-wal2json> server # [ 32.890054] systemd[1]: Expecting device /sys/subsystem/net/devices/eth1... vm-test-run-wal2json> server # [ 32.894821] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-wal2json> server # [ 32.899404] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-wal2json> server # [ 32.904668] systemd[1]: Reached target Path Units. vm-test-run-wal2json> server # [ 32.909755] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 32.914343] systemd[1]: Reached target Slice Units. vm-test-run-wal2json> server # [ 32.919628] systemd[1]: Reached target Swaps. vm-test-run-wal2json> server # [ 32.960576] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-wal2json> server # [ 32.988149] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-wal2json> server # [ 32.999450] systemd[1]: Listening on Journal Audit Socket. vm-test-run-wal2json> server # [ 33.006827] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-wal2json> server # [ 33.014012] systemd[1]: Listening on Journal Sockets. vm-test-run-wal2json> server # [ 33.022490] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-wal2json> server # [ 33.027525] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 33.034191] systemd[1]: Listening on udev Control Socket. vm-test-run-wal2json> server # [ 33.039648] systemd[1]: Listening on udev Kernel Socket. vm-test-run-wal2json> server # [ 33.093853] systemd[1]: Mounting Huge Pages File System... vm-test-run-wal2json> server # [ 33.137585] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-wal2json> server # [ 33.192515] systemd[1]: Mounting Kernel Debug File System... vm-test-run-wal2json> server # [ 33.282973] systemd[1]: Mounting Kernel Trace File System... vm-test-run-wal2json> server # [ 33.428319] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-wal2json> server # [ 33.611445] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-wal2json> server # [ 33.622888] systemd[1]: Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs). vm-test-run-wal2json> server # [ 33.750873] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-wal2json> server # [ 33.771220] systemd[1]: Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm). vm-test-run-wal2json> server # [ 33.779422] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 33.832198] systemd[1]: Starting Load Kernel Module fuse... vm-test-run-wal2json> server # [ 33.849722] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 33.857365] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 33.960184] systemd[1]: Starting Journal Service... vm-test-run-wal2json> server # [ 34.051426] systemd[1]: Starting Load Kernel Modules... vm-test-run-wal2json> server # [ 34.146386] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-wal2json> server # [ 34.218428] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-wal2json> server # [ 34.225875] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 34.293389] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-wal2json> server # [ 34.380399] systemd[1]: Mounted Huge Pages File System. vm-test-run-wal2json> server # [ 34.393312] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-wal2json> server # [ 34.410457] systemd[1]: Mounted Kernel Debug File System. vm-test-run-wal2json> server # [ 34.422097] systemd[1]: Mounted Kernel Trace File System. vm-test-run-wal2json> server # [ 34.441789] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-wal2json> server # [ 34.459753] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-wal2json> server # [ 34.542984] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-wal2json> server # [ 35.210429] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-wal2json> server # [ 35.226716] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-wal2json> server # [ 35.538132] EXT4-fs (vda): re-mounted f295bcf8-3363-4d01-9a51-5d46645c84c0. vm-test-run-wal2json> server # [ 35.623616] systemd[1]: Finished Load Kernel Modules. vm-test-run-wal2json> server # [ 35.665406] fuse: init (API version 7.41) vm-test-run-wal2json> server # [ 35.705680] systemd[1]: Starting Firewall... vm-test-run-wal2json> server # [ 35.785864] systemd[1]: Starting Apply Kernel Variables... vm-test-run-wal2json> server # [ 35.802059] systemd[1]: modprobe@fuse.service: Deactivated successfully. vm-test-run-wal2json> server # [ 35.819333] systemd[1]: Finished Load Kernel Module fuse. vm-test-run-wal2json> server # [ 35.843917] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-wal2json> server # [ 35.892676] systemd[1]: Mounting FUSE Control File System... vm-test-run-wal2json> server # [ 35.905234] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 35.976671] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-wal2json> server # [ 35.989825] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 36.140307] systemd-journald[399]: Collecting audit messages is enabled. vm-test-run-wal2json> server # [ 36.199065] systemd[1]: Mounted FUSE Control File System. vm-test-run-wal2json> server # [ 37.229720] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-wal2json> server # [ 37.245312] systemd[1]: Reached target First Boot Complete. vm-test-run-wal2json> server # [ 37.443705] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-wal2json> server # [ 37.567950] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-wal2json> server # [ 37.669836] systemd[1]: Finished Apply Kernel Variables. vm-test-run-wal2json> server # [ 37.914604] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-wal2json> server # [ 38.738821] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-wal2json> server # [ 38.762937] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-wal2json> server # [ 38.821021] systemd[1]: Mounting /run/wrappers... vm-test-run-wal2json> server # [ 38.879542] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-wal2json> server # [ 39.314494] systemd[1]: Mounted /run/wrappers. vm-test-run-wal2json> server # [ 39.322057] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 39.356555] systemd[1]: Listening on Boot Entries Service Socket. vm-test-run-wal2json> server # [ 39.414189] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 39.426027] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 39.475318] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-wal2json> server # [ 39.542437] systemd[1]: Started Journal Service. vm-test-run-wal2json> server # [ 39.520477] systemd-modules-load[400]: Module 'atkbd' is built in vm-test-run-wal2json> server # [ 39.531773] systemd-modules-load[400]: Module 'loop' is built in vm-test-run-wal2json> server # [ 39.591874] systemd-oomd[401]: No swap; memory pressure usage will be degraded vm-test-run-wal2json> server # [ 39.647287] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-wal2json> server # [ 40.699184] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-wal2json> server # [ 40.769106] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-wal2json> server # [ 40.863243] systemd-journald[399]: Received client request to flush runtime journal. vm-test-run-wal2json> server # [ 41.498965] systemd-udevd[430]: Using default interface naming scheme 'v258'. vm-test-run-wal2json> server # [ 41.522406] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-wal2json> server # [ 41.542890] systemd[1]: Starting Create System Files and Directories... vm-test-run-wal2json> server # [ 43.635605] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-wal2json> server # [ 43.831660] systemd[1]: Finished Create System Files and Directories. vm-test-run-wal2json> server # [ 43.940430] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-wal2json> server # [ 44.001787] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-wal2json> server # [ 45.188047] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-wal2json> server # [ 46.343253] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-wal2json> server # [ 46.375612] systemd[1]: Starting Update is Completed... vm-test-run-wal2json> server # [ 47.360017] systemd[1]: Finished Update is Completed. vm-test-run-wal2json> server # [ 50.980249] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 50.987856] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 50.997137] systemd[1]: suid-sgid-wrappers.service: Consumed 3.097s CPU time, 5.6M memory peak. vm-test-run-wal2json> server # [ 54.168807] systemd[1]: Finished Firewall. vm-test-run-wal2json> server # [ 55.721142] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-wal2json> server # [ 55.723652] systemd[1]: Reached target System Initialization. vm-test-run-wal2json> server # [ 55.738063] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-wal2json> server # [ 55.749521] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-wal2json> server # [ 55.751555] systemd[1]: Reached target Timer Units. vm-test-run-wal2json> server # [ 55.767249] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-wal2json> server # [ 55.779554] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-wal2json> server # [ 55.785101] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-wal2json> server # [ 55.817439] systemd[1]: Starting OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK)... vm-test-run-wal2json> server # [ 55.823261] systemd[1]: Listening on Hostname Service Socket. vm-test-run-wal2json> server # [ 55.990587] (sh-issue)[635]: sshd-vsock.socket: Unable to locate executable '/usr/lib/systemd/systemd-ssh-issue': No such file or directory vm-test-run-wal2json> server # [ 56.033356] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK). vm-test-run-wal2json> server # [ 56.036041] systemd[1]: Reached target Socket Units. vm-test-run-wal2json> server # [ 56.039030] systemd[1]: Reached target Basic System. vm-test-run-wal2json> server # [ 56.092958] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-wal2json> server # [ 56.145190] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-wal2json> server # [ 56.204979] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 56.270634] systemd[1]: Started Reset console on configuration changes. vm-test-run-wal2json> server # [ 56.310876] systemd[1]: Starting resolvconf update... vm-test-run-wal2json> server # [ 56.407825] systemd[1]: Starting SSH Host Keys Generation... vm-test-run-wal2json> server # [ 57.677811] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-wal2json> server # [ 57.951767] dbus-daemon[637]: dbus[637]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 58.001474] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 58.033106] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 58.042388] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 58.125042] nsncd[639]: Oct 07 23:53:16.391 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 58.127006] systemd[1]: Starting User Login Management... vm-test-run-wal2json> server # [ 58.725005] systemd[1]: Started D-Bus System Message Bus. vm-test-run-wal2json> server: Guest root shell did not produce any data yet... vm-test-run-wal2json> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-wal2json> server # [ 59.975313] systemd-logind[663]: New seat seat0. vm-test-run-wal2json> server # [ 60.074351] systemd[1]: Started User Login Management. vm-test-run-wal2json> server # [ 60.089196] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 60.301551] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 60.333354] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-wal2json> server # [ 60.358034] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-wal2json> server # [ 60.374341] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-wal2json> server # [ 60.391027] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 60.405840] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-wal2json> server # [ 60.417542] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 60.573298] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-wal2json> server # [ 60.977191] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 61.000186] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 61.609963] nsncd[710]: Oct 07 23:53:20.014 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-wal2json> server # [ 61.630149] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-wal2json> server # [ 61.637313] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-wal2json> server # [ 61.645104] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-wal2json> server # [ 62.185188] systemd[1]: Finished resolvconf update. vm-test-run-wal2json> server # [ 62.197012] systemd[1]: Reached target Preparation for Network. vm-test-run-wal2json> server # [ 62.261309] systemd[1]: Starting DHCP Client... vm-test-run-wal2json> server # [ 64.120049] dhcpcd[756]: dhcpcd-10.2.4 starting vm-test-run-wal2json> server # [ 64.324874] dhcpcd[772]: dev: loaded udev vm-test-run-wal2json> server # [ 64.788954] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-wal2json> server # [ 65.254425] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-wal2json> server # [ 65.530427] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-wal2json> server # [ 65.538431] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-wal2json> server # [ 65.563887] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 vm-test-run-wal2json> server # [ 65.574449] cfg80211: failed to load regulatory.db vm-test-run-wal2json> server # [ 66.661470] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-wal2json> server # [ 66.638007] dhcpcd[772]: eth0: waiting for carrier vm-test-run-wal2json> server # [ 66.650962] dhcpcd[772]: eth0: carrier acquired vm-test-run-wal2json> server # [ 66.841120] dhcpcd[772]: DUID 00:01:00:01:32:59:97:f5:52:54:00:12:34:56 vm-test-run-wal2json> server # [ 66.846236] dhcpcd[772]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 66.859656] dhcpcd[772]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-wal2json> server # [ 66.983671] sshd-keygen-start[668]: Generating public/private rsa key pair. vm-test-run-wal2json> server # [ 66.993605] sshd-keygen-start[668]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key vm-test-run-wal2json> server # [ 66.998414] sshd-keygen-start[668]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub vm-test-run-wal2json> server # [ 67.008852] sshd-keygen-start[668]: The key fingerprint is: vm-test-run-wal2json> server # [ 67.010238] sshd-keygen-start[668]: SHA256:sUkchlFooIoN39BmTm3iAPsuME3NSiwfABoOdPK3+AA root@server vm-test-run-wal2json> server # [ 67.015232] sshd-keygen-start[668]: The key's randomart image is: vm-test-run-wal2json> server # [ 67.018734] sshd-keygen-start[668]: +---[RSA 4096]----+ vm-test-run-wal2json> server # [ 67.026979] sshd-keygen-start[668]: |Oo ....=+ | vm-test-run-wal2json> server # [ 67.029744] sshd-keygen-start[668]: |+*+= .+o . | vm-test-run-wal2json> server # [ 67.036799] sshd-keygen-start[668]: |=EO.Ooo + | vm-test-run-wal2json> server # [ 67.045211] sshd-keygen-start[668]: |.%.%oo.. + | vm-test-run-wal2json> server # [ 67.046234] sshd-keygen-start[668]: |= Bo+. S | vm-test-run-wal2json> server # [ 67.046820] sshd-keygen-start[668]: |.o o | vm-test-run-wal2json> server # [ 67.047323] sshd-keygen-start[668]: |. . . | vm-test-run-wal2json> server # [ 67.053431] sshd-keygen-start[668]: | . | vm-test-run-wal2json> server # [ 67.054772] sshd-keygen-start[668]: | | vm-test-run-wal2json> server # [ 67.062154] sshd-keygen-start[668]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 67.330227] dhcpcd[772]: eth0: soliciting a DHCP lease vm-test-run-wal2json> server # [ 67.385567] dhcpcd[772]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-wal2json> server # [ 67.413316] dhcpcd[772]: eth0: probing address 10.0.2.15/24 vm-test-run-wal2json> server # [ 67.666409] sshd-keygen-start[819]: Generating public/private ed25519 key pair. vm-test-run-wal2json> server # [ 67.672945] sshd-keygen-start[819]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key vm-test-run-wal2json> server # [ 67.678175] sshd-keygen-start[819]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub vm-test-run-wal2json> server # [ 67.684038] sshd-keygen-start[819]: The key fingerprint is: vm-test-run-wal2json> server # [ 67.698635] sshd-keygen-start[819]: SHA256:7nojJg2BVsOu73ZjG++/wPZUIDBCYH8YAfJtW4qsQO4 root@server vm-test-run-wal2json> server # [ 67.702949] sshd-keygen-start[819]: The key's randomart image is: vm-test-run-wal2json> server # [ 67.709020] sshd-keygen-start[819]: +--[ED25519 256]--+ vm-test-run-wal2json> server # [ 67.713473] sshd-keygen-start[819]: |. +==.o | vm-test-run-wal2json> server # [ 67.722414] sshd-keygen-start[819]: | + o++ o | vm-test-run-wal2json> server # [ 67.723857] sshd-keygen-start[819]: | ..+=.o . . | vm-test-run-wal2json> server # [ 67.732291] sshd-keygen-start[819]: |o.ooo= . . | vm-test-run-wal2json> server # [ 67.747206] sshd-keygen-start[819]: |.oo.o. S . | vm-test-run-wal2json> server # [ 67.747847] sshd-keygen-start[819]: |o.. . o . | vm-test-run-wal2json> server # [ 67.757859] sshd-keygen-start[819]: |.E . o. = . | vm-test-run-wal2json> server # [ 67.759063] sshd-keygen-start[819]: | + B=o+ | vm-test-run-wal2json> server # [ 67.760301] sshd-keygen-start[819]: | o.=oB+o+. | vm-test-run-wal2json> server # [ 67.761029] sshd-keygen-start[819]: +----[SHA256]-----+ vm-test-run-wal2json> server # [ 67.767963] systemd[1]: sshd-keygen.service: Deactivated successfully. vm-test-run-wal2json> server # [ 67.776513] systemd[1]: Finished SSH Host Keys Generation. vm-test-run-wal2json> server # [ 67.779716] systemd[1]: sshd-keygen.service: Consumed 5.305s CPU time, 2.9M memory peak. vm-test-run-wal2json> server # [ 68.173730] systemd[1]: Found device /dev/hvc0. vm-test-run-wal2json> server # [ 69.718336] dhcpcd[772]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 69.726122] dhcpcd[772]: eth0: Router Advertisement from fe80::2 vm-test-run-wal2json> server # [ 69.738081] dhcpcd[772]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-wal2json> server # [ 69.743975] dhcpcd[772]: eth0: adding route to fec0::/64 vm-test-run-wal2json> server # [ 69.746309] dhcpcd[772]: eth0: adding default route via fe80::2 vm-test-run-wal2json> server # [ 70.131697] systemd[1]: Found device /dev/ttyAMA0. vm-test-run-wal2json> server # [ 70.174559] systemd[1]: Started backdoor.service. vm-test-run-wal2json> server # [ 70.638495] (udev-worker)[828]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # connecting to host... vm-test-run-wal2json> server # [ 70.951113] (udev-worker)[827]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-wal2json> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-wal2json> server: connected to guest root shell vm-test-run-wal2json> server: (connecting took 71.93 seconds) vm-test-run-wal2json> server: (finished: waiting for the VM to finish booting, in 71.93 seconds) vm-test-run-wal2json> server # [ 70.961434] (udev-worker)[827]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-wal2json> server # [ 72.314235] dhcpcd[772]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 72.361508] dhcpcd[772]: eth0: adding route to 10.0.2.0/24 vm-test-run-wal2json> server # [ 72.363597] dhcpcd[772]: eth0: adding default route via 10.0.2.2 vm-test-run-wal2json> server # [ 72.569433] systemd[1]: Found device Virtio network device. vm-test-run-wal2json> server # [ 72.671039] systemd[1]: Starting Address configuration of eth1... vm-test-run-wal2json> server # [ 73.817607] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-wal2json> server # [ 74.039215] network-addresses-eth1-start[866]: adding address 192.168.1.1/24... done vm-test-run-wal2json> server # [ 74.275930] network-addresses-eth1-start[866]: adding address 2001:db8:1::1/64... done vm-test-run-wal2json> server # [ 74.552225] systemd[1]: Finished Address configuration of eth1. vm-test-run-wal2json> server # [ 74.597037] systemd[1]: Starting Networking Setup... vm-test-run-wal2json> server # [ 75.568091] systemd[1]: Started DHCP Client. vm-test-run-wal2json> server # [ 75.621329] dhcpcd[772]: eth0: IAID 00:12:34:56 vm-test-run-wal2json> server # [ 75.971024] dhcpcd[772]: eth0: soliciting an IPv6 router vm-test-run-wal2json> server # [ 77.538798] dhcpcd[772]: eth0: rebinding lease of 10.0.2.15 vm-test-run-wal2json> server # [ 77.550560] dhcpcd[772]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-wal2json> server # [ 78.106759] systemd[1]: Finished Networking Setup. vm-test-run-wal2json> server # [ 78.137562] systemd[1]: Reached target Network. vm-test-run-wal2json> server # [ 78.189735] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 78.217362] systemd[1]: Starting SSH Daemon... vm-test-run-wal2json> server # [ 78.283888] systemd[1]: Starting Permit User Sessions... vm-test-run-wal2json> server # [ 79.363728] systemd[1]: Finished Permit User Sessions. vm-test-run-wal2json> server # [ 79.446117] systemd[1]: Started Getty on tty1. vm-test-run-wal2json> server # [ 79.458084] systemd[1]: Reached target Login Prompts. vm-test-run-wal2json> server # [ 79.555316] sshd[1006]: Server listening on 0.0.0.0 port 22. vm-test-run-wal2json> server # [ 79.557982] sshd[1006]: Server listening on :: port 22. vm-test-run-wal2json> server # [ 79.563376] systemd[1]: Started SSH Daemon. vm-test-run-wal2json> server # [ 82.100174] postgresql-pre-start[1028]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 82.119361] postgresql-pre-start[1028]: This user must also own the server process. vm-test-run-wal2json> server # [ 82.221579] postgresql-pre-start[1028]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 82.223207] postgresql-pre-start[1028]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 82.225174] postgresql-pre-start[1028]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 82.234077] postgresql-pre-start[1028]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 82.235791] postgresql-pre-start[1028]: fixing permissions on existing directory /var/lib/postgresql/15 ... ok vm-test-run-wal2json> server # [ 82.254421] postgresql-pre-start[1028]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 82.278188] postgresql-pre-start[1028]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 83.517506] postgresql-pre-start[1028]: selecting default max_connections ... 100 vm-test-run-wal2json> server # [ 84.133166] postgresql-pre-start[1028]: selecting default shared_buffers ... 128MB vm-test-run-wal2json> server # [ 86.877425] systemd-logind[663]: Watching system buttons on /dev/input/event0 (gpio-keys) vm-test-run-wal2json> server # [ 96.319275] mousedev: PS/2 mouse device common for all mice vm-test-run-wal2json> server # [ 97.299795] postgresql-pre-start[1028]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 97.361313] postgresql-pre-start[1028]: creating configuration files ... ok vm-test-run-wal2json> server # [ 100.286367] systemd-logind[663]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) vm-test-run-wal2json> server # [ 102.563837] postgresql-pre-start[1028]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 114.723526] postgresql-pre-start[1028]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 117.400268] postgresql-pre-start[1028]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 117.406864] postgresql-pre-start[1028]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 117.407778] postgresql-pre-start[1028]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 117.410422] postgresql-pre-start[1028]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 117.414934] postgresql-pre-start[1028]: /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/bin/pg_ctl -D /var/lib/postgresql/15 -l logfile start vm-test-run-wal2json> server # [ 119.315388] postgres[1401]: [1401] LOG: starting PostgreSQL 15.19 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 119.326448] postgres[1401]: [1401] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 119.328265] postgres[1401]: [1401] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 119.342656] postgres[1401]: [1401] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 119.472712] postgres[1414]: [1414] LOG: database system was shut down at 2026-10-07 23:54:12 GMT vm-test-run-wal2json> server # [ 119.601681] postgres[1401]: [1401] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 119.695737] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 119.768983] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 121.956664] postgresql-setup-start[1454]: CREATE ROLE vm-test-run-wal2json> server # [ 122.200544] postgresql-setup-start[1456]: ALTER ROLE vm-test-run-wal2json> server # [ 122.258346] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 122.266823] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 122.277518] systemd[1]: Reached target Multi-User System. vm-test-run-wal2json> server # [ 122.278964] systemd[1]: Startup finished in 20.502s (kernel) + 1min 41.769s (userspace) = 2min 2.272s. vm-test-run-wal2json> server: (finished: waiting for unit multi-user.target, in 124.10 seconds) vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 1.36 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.50 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 15 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.48 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.61 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.79 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 15, in 1.88 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 15 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" vm-test-run-wal2json> server # [ 127.854666] sudo[1516]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 wal2json vm-test-run-wal2json> server # [ 128.058444] sudo[1516]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # pg_regress: could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 128.686388] postgres[1530]: [1530] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 128.690134] postgres[1530]: [1530] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 128.694028] postgres[1530]: [1530] STATEMENT: select vm-test-run-wal2json> server # [ 128.695199] postgres[1530]: 1 vm-test-run-wal2json> server # [ 128.695782] postgres[1530]: from vm-test-run-wal2json> server # [ 128.697103] postgres[1530]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 128.749899] postgres[1530]: [1530] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 128.755410] postgres[1530]: [1530] DETAIL: Streaming transactions committing after 0/152AC80, reading WAL from 0/152AC48. vm-test-run-wal2json> server # [ 128.761679] postgres[1530]: [1530] STATEMENT: select vm-test-run-wal2json> server # [ 128.762165] postgres[1530]: data vm-test-run-wal2json> server # [ 128.763373] postgres[1530]: from vm-test-run-wal2json> server # [ 128.771131] postgres[1530]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 128.772069] postgres[1530]: 'reg_test', vm-test-run-wal2json> server # [ 128.772389] postgres[1530]: null, vm-test-run-wal2json> server # [ 128.781753] postgres[1530]: null, vm-test-run-wal2json> server # [ 128.782763] postgres[1530]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 128.786691] postgres[1530]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 128.799159] postgres[1530]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 128.803031] postgres[1530]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 128.803632] postgres[1530]: 'format-version', '2', vm-test-run-wal2json> server # [ 128.806473] postgres[1530]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 128.809394] postgres[1530]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 128.810014] postgres[1530]: ) x; vm-test-run-wal2json> server # [ 128.811579] postgres[1530]: [1530] LOG: logical decoding found consistent point at 0/152AC48 vm-test-run-wal2json> server # [ 128.812053] postgres[1530]: [1530] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 128.827694] postgres[1530]: [1530] STATEMENT: select vm-test-run-wal2json> server # [ 128.830207] postgres[1530]: data vm-test-run-wal2json> server # [ 128.831495] postgres[1530]: from vm-test-run-wal2json> server # [ 128.833052] postgres[1530]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 128.833986] postgres[1530]: 'reg_test', vm-test-run-wal2json> server # [ 128.835045] postgres[1530]: null, vm-test-run-wal2json> server # [ 128.835539] postgres[1530]: null, vm-test-run-wal2json> server # [ 128.836082] postgres[1530]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 128.837591] postgres[1530]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 128.837945] postgres[1530]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 128.838216] postgres[1530]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 128.838709] postgres[1530]: 'format-version', '2', vm-test-run-wal2json> server # [ 128.839300] postgres[1530]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 128.839611] postgres[1530]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 128.839874] postgres[1530]: ) x; vm-test-run-wal2json> server # [ 129.305325] sudo[1516]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/splx1dg5r36v251n9d2p0b0bki2xxqb4-postgresql-15-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_15 "wal2json" , in 2.53 seconds) vm-test-run-wal2json> (using postmaster on Unix socket, default port) vm-test-run-wal2json> ============== running regression test queries ============== vm-test-run-wal2json> test wal2json ... ok 722 ms vm-test-run-wal2json> vm-test-run-wal2json> ===================== vm-test-run-wal2json> All 1 tests passed. vm-test-run-wal2json> ===================== vm-test-run-wal2json> vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 15 after extension upgrade, in 2.53 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.79 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.58 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.48 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.86 seconds) vm-test-run-wal2json> subtest: switch to postgresql 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: [ 140.639061] nixos[1569]: switching to system configuration /nix/store/sxd6kadjcgrv4ya7j21ygamx4w1imjyv-nixos-system-server-test vm-test-run-wal2json> server # postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 140.673372] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 140.684962] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 140.693166] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 140.694396] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 140.695573] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 140.721817] postgres[1401]: [1401] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 140.723418] postgres[1401]: [1401] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 140.777478] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 140.825918] postgres[1401]: [1401] LOG: background worker "logical replication launcher" (PID 1418) exited with exit code 1 vm-test-run-wal2json> server # [ 140.835459] postgres[1412]: [1412] LOG: shutting down vm-test-run-wal2json> server # [ 140.851988] postgres[1412]: [1412] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 141.089341] postgres[1412]: [1412] LOG: checkpoint complete: wrote 54 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.079 s, sync=0.092 s, total=0.259 s; sync files=48, longest=0.017 s, average=0.002 s; distance=149 kB, estimate=149 kB vm-test-run-wal2json> server # [ 141.137855] postgres[1401]: [1401] LOG: database system is shut down vm-test-run-wal2json> server # [ 141.225099] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 141.242527] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 141.249772] systemd[1]: postgresql.service: Consumed 21.114s CPU time, 91.2M memory peak, 45.9M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 149.311913] systemd[1]: Reload requested from client PID 1569 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 149.319382] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 155.098001] systemd[1]: Reloading finished in 5761 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 155.505064] systemd[1]: Starting Re-setup tmpfiles on a system that is already running.... vm-test-run-wal2json> server # [ 156.825623] systemd[1]: Finished Re-setup tmpfiles on a system that is already running.. vm-test-run-wal2json> server # [ 156.859359] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 156.931927] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 157.419109] dbus-daemon[637]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 157.754209] dbus-daemon[637]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 157.792425] dbus-send[1768]: method return time=1791417296.183029 sender=org.freedesktop.DBus -> destination=:1.5 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 157.807205] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # [ 157.957369] dbus-daemon[637]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 158.245277] dbus-daemon[637]: [system] Reloaded configuration vm-test-run-wal2json> server # starting the following units: postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 158.365870] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 158.412987] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 158.414230] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 158.414870] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 158.415982] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 158.430331] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 158.434219] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 158.435156] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 158.441424] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 158.827417] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 158.904704] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 158.980791] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 164.239397] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 164.247887] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 164.258244] systemd[1]: suid-sgid-wrappers.service: Consumed 2.586s CPU time, 3.3M memory peak. vm-test-run-wal2json> server # [ 164.313303] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 164.376885] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 164.378973] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 164.932018] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 164.957592] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 166.038190] postgresql-migrate-start[1905]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 166.043856] postgresql-migrate-start[1905]: This user must also own the server process. vm-test-run-wal2json> server # [ 166.132109] postgresql-migrate-start[1905]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 166.135348] postgresql-migrate-start[1905]: The default database encoding has accordingly been set to "UTF8". vm-test-run-wal2json> server # [ 166.140018] postgresql-migrate-start[1905]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 166.148592] postgresql-migrate-start[1905]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 166.152639] postgresql-migrate-start[1905]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 166.153995] postgresql-migrate-start[1905]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 166.155563] postgresql-migrate-start[1905]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 167.229772] postgresql-migrate-start[1905]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 167.939739] postgresql-migrate-start[1905]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 174.616294] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:08.0/virtio7/input/input3 vm-test-run-wal2json> server # [ 176.863952] postgresql-migrate-start[1905]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 176.903855] postgresql-migrate-start[1905]: creating configuration files ... ok vm-test-run-wal2json> server # [ 180.282935] postgresql-migrate-start[1905]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 183.770262] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-wal2json> server # [ 183.974553] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 184.230335] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 184.243511] systemd[1]: Stopped Virtual Console Setup. vm-test-run-wal2json> server # [ 184.303007] systemd[1]: Starting Virtual Console Setup... vm-test-run-wal2json> server # [ 188.703955] systemd[1]: Finished Virtual Console Setup. vm-test-run-wal2json> server # [ 190.407436] systemd-logind[663]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-wal2json> server # [ 190.805402] postgresql-migrate-start[1905]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 192.115582] postgresql-migrate-start[1905]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 192.116925] postgresql-migrate-start[1905]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 192.118026] postgresql-migrate-start[1905]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 192.118701] postgresql-migrate-start[1905]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 192.119084] postgresql-migrate-start[1905]: /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 195.389871] postgresql-migrate-start[2077]: Performing Consistency Checks vm-test-run-wal2json> server # [ 195.394031] postgresql-migrate-start[2077]: ----------------------------- vm-test-run-wal2json> server # [ 195.397076] postgresql-migrate-start[2077]: Checking cluster versions ok vm-test-run-wal2json> server # [ 197.438854] postgresql-migrate-start[2077]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 197.488896] postgresql-migrate-start[2077]: Checking database connection settings ok vm-test-run-wal2json> server # [ 197.551462] postgresql-migrate-start[2077]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 197.555207] postgresql-migrate-start[2077]: Checking for contrib/isn with bigint-passing mismatch ok vm-test-run-wal2json> server # [ 198.137125] postgresql-migrate-start[2077]: Checking data type usage ok vm-test-run-wal2json> server # [ 198.283502] postgresql-migrate-start[2077]: Checking for not-null constraint inconsistencies ok vm-test-run-wal2json> server # [ 198.822950] postgresql-migrate-start[2077]: Creating dump of global objects ok vm-test-run-wal2json> server # [ 200.726769] postgresql-migrate-start[2077]: Creating dump of database schemas ok vm-test-run-wal2json> server # [ 202.874624] postgresql-migrate-start[2077]: Checking for presence of required libraries ok vm-test-run-wal2json> server # [ 202.945412] postgresql-migrate-start[2077]: Checking database user is the install user ok vm-test-run-wal2json> server # [ 203.014114] postgresql-migrate-start[2077]: Checking for prepared transactions ok vm-test-run-wal2json> server # [ 203.017709] postgresql-migrate-start[2077]: Checking for new cluster tablespace directories ok vm-test-run-wal2json> server # [ 203.019136] postgresql-migrate-start[2077]: If pg_upgrade fails after this point, you must re-initdb the vm-test-run-wal2json> server # [ 203.026871] postgresql-migrate-start[2077]: new cluster before continuing. vm-test-run-wal2json> server # [ 203.030108] postgresql-migrate-start[2077]: Performing Upgrade vm-test-run-wal2json> server # [ 203.036017] postgresql-migrate-start[2077]: ------------------ vm-test-run-wal2json> server # [ 203.070151] postgresql-migrate-start[2077]: Setting locale and encoding for new cluster ok vm-test-run-wal2json> server # [ 205.249480] postgresql-migrate-start[2077]: Analyzing all rows in the new cluster ok vm-test-run-wal2json> server # [ 206.177742] postgresql-migrate-start[2077]: Freezing all rows in the new cluster ok vm-test-run-wal2json> server # [ 206.502381] postgresql-migrate-start[2077]: Deleting files from new pg_xact ok vm-test-run-wal2json> server # [ 206.655530] postgresql-migrate-start[2077]: Copying old pg_xact to new server ok vm-test-run-wal2json> server # [ 206.985936] postgresql-migrate-start[2077]: Setting oldest XID for new cluster ok vm-test-run-wal2json> server # [ 207.902290] postgresql-migrate-start[2077]: Setting next transaction ID and epoch for new cluster ok vm-test-run-wal2json> server # [ 207.905879] postgresql-migrate-start[2077]: Deleting files from new pg_multixact/offsets ok vm-test-run-wal2json> server # [ 208.045632] postgresql-migrate-start[2077]: Copying old pg_multixact/offsets to new server ok vm-test-run-wal2json> server # [ 208.047542] postgresql-migrate-start[2077]: Deleting files from new pg_multixact/members ok vm-test-run-wal2json> server # [ 208.186783] postgresql-migrate-start[2077]: Copying old pg_multixact/members to new server ok vm-test-run-wal2json> server # [ 208.481353] postgresql-migrate-start[2077]: Setting next multixact ID and offset for new cluster ok vm-test-run-wal2json> server # [ 208.786851] postgresql-migrate-start[2077]: Resetting WAL archives ok vm-test-run-wal2json> server # [ 210.259556] postgresql-migrate-start[2077]: Setting frozenxid and minmxid counters in new cluster ok vm-test-run-wal2json> server # [ 210.643878] postgresql-migrate-start[2077]: Restoring global objects in the new cluster ok vm-test-run-wal2json> server # [ 212.617532] postgresql-migrate-start[2077]: Restoring database schemas in the new cluster ok vm-test-run-wal2json> server # [ 213.298836] postgresql-migrate-start[2077]: Copying user relation files ok vm-test-run-wal2json> server # [ 213.601784] postgresql-migrate-start[2077]: Setting next OID for new cluster ok vm-test-run-wal2json> server # [ 215.283471] postgresql-migrate-start[2077]: Sync data directory to disk ok vm-test-run-wal2json> server # [ 215.289474] postgresql-migrate-start[2077]: Creating script to delete old cluster ok vm-test-run-wal2json> server # [ 217.481432] postgresql-migrate-start[2077]: Checking for extension updates ok vm-test-run-wal2json> server # [ 217.761307] postgresql-migrate-start[2077]: Upgrade Complete vm-test-run-wal2json> server # [ 217.762480] postgresql-migrate-start[2077]: ---------------- vm-test-run-wal2json> server # [ 217.763425] postgresql-migrate-start[2077]: Optimizer statistics are not transferred by pg_upgrade. vm-test-run-wal2json> server # [ 217.765741] postgresql-migrate-start[2077]: Once you start the new server, consider running: vm-test-run-wal2json> server # [ 217.766405] postgresql-migrate-start[2077]: /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/bin/vacuumdb --all --analyze-in-stages vm-test-run-wal2json> server # [ 217.767296] postgresql-migrate-start[2077]: Running this script will delete the old cluster's data files: vm-test-run-wal2json> server # [ 217.769619] postgresql-migrate-start[2077]: ./delete_old_cluster.sh vm-test-run-wal2json> server # [ 217.812048] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 217.856038] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 219.357785] postgres[2238]: [2238] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 219.361857] postgres[2238]: [2238] LOG: listening on IPv4 address "0.0.0.0", port 5432 vm-test-run-wal2json> server # [ 219.365598] postgres[2238]: [2238] LOG: listening on IPv6 address "::", port 5432 vm-test-run-wal2json> server # [ 219.374857] postgres[2238]: [2238] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 219.454620] postgres[2244]: [2244] LOG: database system was shut down at 2026-10-07 23:55:56 GMT vm-test-run-wal2json> server # [ 219.538026] postgres[2238]: [2238] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 219.571813] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 219.607402] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 220.477557] postgresql-setup-start[2254]: ALTER ROLE vm-test-run-wal2json> server # [ 220.529086] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 220.541572] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # the following new units were started: postgresql-migrate.service, sys-devices-platform-4010000000.pcie-pci0000:00-0000:00:0b.0-virtio9-virtio\x2dports-vport9p0.device, sys-devices-virtual-input-mice.device, sys-devices-virtual-misc-rfkill.device, sys-devices-virtual-misc-tun.device, sys-devices-virtual-mtd-mtd0ro.device, sysinit-reactivation.target, systemd-rfkill.socket, systemd-tmpfiles-resetup.service, systemd-vconsole-setup.service vm-test-run-wal2json> server # [ 220.846120] nixos[1569]: finished switching to system configuration /nix/store/sxd6kadjcgrv4ya7j21ygamx4w1imjyv-nixos-system-server-test vm-test-run-wal2json> server: waiting for unit postgresql.service vm-test-run-wal2json> server: (finished: waiting for unit postgresql.service, in 0.88 seconds) vm-test-run-wal2json> server: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no' vm-test-run-wal2json> server: (finished: must succeed: test -f /var/lib/postgresql/update_extensions.sql && echo 'yes' || echo 'no', in 0.19 seconds) vm-test-run-wal2json> (finished: subtest: switch to postgresql 17, in 90.73 seconds) vm-test-run-wal2json> subtest: Check last version of the extension after postgresql upgrade vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.40 seconds) vm-test-run-wal2json> (finished: subtest: Check last version of the extension after postgresql upgrade, in 0.40 seconds) vm-test-run-wal2json> subtest: Check upgrade path with postgresql 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.38 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.45 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.37 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with postgresql 17, in 1.20 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after extension upgrade vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 223.964895] sudo[2280]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 224.098169] sudo[2280]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 224.596957] postgres[2287]: [2287] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 224.599321] postgres[2287]: [2287] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 224.601325] postgres[2287]: [2287] STATEMENT: select vm-test-run-wal2json> server # [ 224.602318] postgres[2287]: 1 vm-test-run-wal2json> server # [ 224.602825] postgres[2287]: from vm-test-run-wal2json> server # [ 224.603165] postgres[2287]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 224.646016] postgres[2287]: [2287] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 224.647592] postgres[2287]: [2287] DETAIL: Streaming transactions committing after 0/8034ED0, reading WAL from 0/8034E98. vm-test-run-wal2json> server # [ 224.649556] postgres[2287]: [2287] STATEMENT: select vm-test-run-wal2json> server # [ 224.649997] postgres[2287]: data vm-test-run-wal2json> server # [ 224.651720] postgres[2287]: from vm-test-run-wal2json> server # [ 224.653145] postgres[2287]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 224.653760] postgres[2287]: 'reg_test', vm-test-run-wal2json> server # [ 224.657327] postgres[2287]: null, vm-test-run-wal2json> server # [ 224.658138] postgres[2287]: null, vm-test-run-wal2json> server # [ 224.658482] postgres[2287]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 224.659007] postgres[2287]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 224.659341] postgres[2287]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 224.659611] postgres[2287]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 224.659881] postgres[2287]: 'format-version', '2', vm-test-run-wal2json> server # [ 224.661001] postgres[2287]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 224.662062] postgres[2287]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 224.662798] postgres[2287]: ) x; vm-test-run-wal2json> server # [ 224.663899] postgres[2287]: [2287] LOG: logical decoding found consistent point at 0/8034E98 vm-test-run-wal2json> server # [ 224.665516] postgres[2287]: [2287] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 224.666244] postgres[2287]: [2287] STATEMENT: select vm-test-run-wal2json> server # [ 224.667652] postgres[2287]: data vm-test-run-wal2json> server # [ 224.668003] postgres[2287]: from vm-test-run-wal2json> server # [ 224.670070] postgres[2287]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 224.670489] postgres[2287]: 'reg_test', vm-test-run-wal2json> server # [ 224.671069] postgres[2287]: null, vm-test-run-wal2json> server # [ 224.671733] postgres[2287]: null, vm-test-run-wal2json> server # [ 224.673343] postgres[2287]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 224.673852] postgres[2287]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 224.674834] postgres[2287]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 224.675162] postgres[2287]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 224.676172] postgres[2287]: 'format-version', '2', vm-test-run-wal2json> server # [ 224.677662] postgres[2287]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 224.678903] postgres[2287]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 224.679884] postgres[2287]: ) x; vm-test-run-wal2json> server # [ 224.930826] sudo[2280]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.40 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 539 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after extension upgrade, in 1.40 seconds) vm-test-run-wal2json> subtest: Check the install of the last version of the extension vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.39 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.39 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.37 seconds) vm-test-run-wal2json> (finished: subtest: Check the install of the last version of the extension, in 1.15 seconds) vm-test-run-wal2json> subtest: Check pg_regress with postgresql 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" vm-test-run-wal2json> server # [ 226.503872] sudo[2302]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 wal2json vm-test-run-wal2json> server # [ 226.637863] sudo[2302]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 227.093330] postgres[2309]: [2309] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 227.095992] postgres[2309]: [2309] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 227.098695] postgres[2309]: [2309] STATEMENT: select vm-test-run-wal2json> server # [ 227.099585] postgres[2309]: 1 vm-test-run-wal2json> server # [ 227.100779] postgres[2309]: from vm-test-run-wal2json> server # [ 227.101268] postgres[2309]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 227.133670] postgres[2309]: [2309] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 227.135662] postgres[2309]: [2309] DETAIL: Streaming transactions committing after 0/803B920, reading WAL from 0/803B8E8. vm-test-run-wal2json> server # [ 227.138093] postgres[2309]: [2309] STATEMENT: select vm-test-run-wal2json> server # [ 227.138745] postgres[2309]: data vm-test-run-wal2json> server # [ 227.139081] postgres[2309]: from vm-test-run-wal2json> server # [ 227.139686] postgres[2309]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 227.140228] postgres[2309]: 'reg_test', vm-test-run-wal2json> server # [ 227.142357] postgres[2309]: null, vm-test-run-wal2json> server # [ 227.142989] postgres[2309]: null, vm-test-run-wal2json> server # [ 227.143804] postgres[2309]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 227.144080] postgres[2309]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 227.145762] postgres[2309]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 227.146324] postgres[2309]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 227.146731] postgres[2309]: 'format-version', '2', vm-test-run-wal2json> server # [ 227.147468] postgres[2309]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 227.149147] postgres[2309]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 227.149758] postgres[2309]: ) x; vm-test-run-wal2json> server # [ 227.151937] postgres[2309]: [2309] LOG: logical decoding found consistent point at 0/803B8E8 vm-test-run-wal2json> server # [ 227.155187] postgres[2309]: [2309] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 227.155919] postgres[2309]: [2309] STATEMENT: select vm-test-run-wal2json> server # [ 227.157174] postgres[2309]: data vm-test-run-wal2json> server # [ 227.157578] postgres[2309]: from vm-test-run-wal2json> server # [ 227.158122] postgres[2309]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 227.158387] postgres[2309]: 'reg_test', vm-test-run-wal2json> server # [ 227.159079] postgres[2309]: null, vm-test-run-wal2json> server # [ 227.159542] postgres[2309]: null, vm-test-run-wal2json> server # [ 227.161764] postgres[2309]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 227.162819] postgres[2309]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 227.164119] postgres[2309]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 227.165029] postgres[2309]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 227.165349] postgres[2309]: 'format-version', '2', vm-test-run-wal2json> server # [ 227.166153] postgres[2309]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 227.166943] postgres[2309]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 227.167416] postgres[2309]: ) x; vm-test-run-wal2json> server # [ 227.415064] sudo[2302]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/z44z8frkr1l44p672wc25yjcz7cpgn1l-postgresql-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_17 "wal2json" , in 1.33 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 499 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with postgresql 17 after installing the last version, in 1.33 seconds) vm-test-run-wal2json> subtest: switch to orioledb 17 vm-test-run-wal2json> server # Checking switch inhibitors... done vm-test-run-wal2json> server # stopping the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 234.066799] nixos[2316]: switching to system configuration /nix/store/x92yg82an9wrih717zwlv5qkx2r8n04s-nixos-system-server-test vm-test-run-wal2json> server # [ 234.079990] systemd[1]: Stopped target PostgreSQL. vm-test-run-wal2json> server # [ 234.085342] systemd[1]: postgresql-setup.service: Deactivated successfully. vm-test-run-wal2json> server # [ 234.089946] systemd[1]: Stopped PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 234.100042] postgres[2238]: [2238] LOG: received fast shutdown request vm-test-run-wal2json> server # [ 234.103725] systemd[1]: Stopping PostgreSQL Server... vm-test-run-wal2json> server # [ 234.114999] postgres[2238]: [2238] LOG: aborting any active transactions vm-test-run-wal2json> server # [ 234.185652] systemd[1]: Stopped target Remote File Systems. vm-test-run-wal2json> server # [ 234.199891] postgres[2238]: [2238] LOG: background worker "logical replication launcher" (PID 2247) exited with exit code 1 vm-test-run-wal2json> server # [ 234.223505] systemd[1]: Stopped target Local File Systems. vm-test-run-wal2json> server # [ 234.241811] postgres[2242]: [2242] LOG: shutting down vm-test-run-wal2json> server # [ 234.246809] postgres[2242]: [2242] LOG: checkpoint starting: shutdown immediate vm-test-run-wal2json> server # [ 234.399420] postgres[2242]: [2242] LOG: checkpoint complete: wrote 57 buffers (0.3%); 0 WAL file(s) added, 0 removed, 0 recycled; write=0.042 s, sync=0.054 s, total=0.169 s; sync files=45, longest=0.014 s, average=0.002 s; distance=242 kB, estimate=242 kB; lsn=0/803C9C0, redo lsn=0/803C9C0 vm-test-run-wal2json> server # [ 234.447095] postgres[2238]: [2238] LOG: database system is shut down vm-test-run-wal2json> server # [ 234.506785] systemd[1]: postgresql.service: Deactivated successfully. vm-test-run-wal2json> server # [ 234.515811] systemd[1]: Stopped PostgreSQL Server. vm-test-run-wal2json> server # [ 234.523830] systemd[1]: postgresql.service: Consumed 2.384s CPU time, 22.3M memory peak, 264K written to disk. vm-test-run-wal2json> server # [ 234.567527] systemd[1]: postgresql-migrate.service: Deactivated successfully. vm-test-run-wal2json> server # [ 234.571820] systemd[1]: Stopped postgresql-migrate.service. vm-test-run-wal2json> server # [ 234.578350] systemd[1]: postgresql-migrate.service: Consumed 32.226s CPU time, 97M memory peak, 172.6M written to disk. vm-test-run-wal2json> server # activating the configuration... vm-test-run-wal2json> server # setting up /etc... vm-test-run-wal2json> server # [ 239.164246] systemd[1]: Reload requested from client PID 2316 ('.switch-to-conf') (unit backdoor.service)... vm-test-run-wal2json> server # [ 239.169140] systemd[1]: Reloading... vm-test-run-wal2json> server # [ 245.404020] systemd[1]: Reloading finished in 6221 ms. vm-test-run-wal2json> server # restarting sysinit-reactivation.target vm-test-run-wal2json> server # [ 245.732966] systemd[1]: Stopped target Reactivate sysinit units. vm-test-run-wal2json> server # [ 245.736746] systemd[1]: Stopping Reactivate sysinit units... vm-test-run-wal2json> server # [ 245.739874] systemd[1]: Reached target Reactivate sysinit units. vm-test-run-wal2json> server # reloading the following units: dbus.service vm-test-run-wal2json> server # [ 245.781382] systemd[1]: Reloading D-Bus System Message Bus... vm-test-run-wal2json> server # [ 246.075112] dbus-daemon[637]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 246.265878] dbus-daemon[637]: [system] Reloaded configuration vm-test-run-wal2json> server # [ 246.274067] dbus-send[2392]: method return time=1791417384.690152 sender=org.freedesktop.DBus -> destination=:1.7 serial=3 reply_serial=2 vm-test-run-wal2json> server # [ 246.350795] dbus-daemon[637]: Unknown username "systemd-timesync" in message bus configuration file vm-test-run-wal2json> server # [ 246.530086] dbus-daemon[637]: [system] Reloaded configuration vm-test-run-wal2json> server # starting the following units: postgresql-migrate.service, postgresql-setup.service, postgresql.service vm-test-run-wal2json> server # [ 246.548181] systemd[1]: Reloaded D-Bus System Message Bus. vm-test-run-wal2json> server # [ 246.602755] systemd[1]: Starting postgresql-migrate.service... vm-test-run-wal2json> server # [ 246.705331] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). vm-test-run-wal2json> server # [ 246.707010] systemd[1]: Reached target Local File Systems. vm-test-run-wal2json> server # [ 246.805588] systemd[1]: Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore). vm-test-run-wal2json> server # [ 246.849654] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-wal2json> server # [ 246.851832] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 246.865356] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). vm-test-run-wal2json> server # [ 246.867204] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). vm-test-run-wal2json> server # [ 246.886839] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 246.893955] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 247.005875] systemd[1]: Reached target Remote File Systems. vm-test-run-wal2json> server # [ 247.091700] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). vm-test-run-wal2json> server # [ 247.685486] systemd[1]: Finished postgresql-migrate.service. vm-test-run-wal2json> server # [ 250.819564] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-wal2json> server # [ 250.822971] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-wal2json> server # [ 250.829916] systemd[1]: suid-sgid-wrappers.service: Consumed 1.875s CPU time, 3.4M memory peak. vm-test-run-wal2json> server # [ 250.872079] systemd[1]: Starting linger-users.service... vm-test-run-wal2json> server # [ 250.923869] systemd[1]: Starting PostgreSQL Server... vm-test-run-wal2json> server # [ 250.934929] systemd[1]: SSH Host Keys Generation was skipped because no trigger condition checks were met. vm-test-run-wal2json> server # [ 251.195871] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-wal2json> server # [ 251.205207] systemd[1]: Finished linger-users.service. vm-test-run-wal2json> server # [ 252.359998] postgresql-pre-start[2475]: The files belonging to this database system will be owned by user "postgres". vm-test-run-wal2json> server # [ 252.365886] postgresql-pre-start[2475]: This user must also own the server process. vm-test-run-wal2json> server # [ 252.434058] postgresql-pre-start[2475]: Using language tag "en-US" for ICU locale "en_US.UTF-8". vm-test-run-wal2json> server # [ 252.435591] postgresql-pre-start[2475]: The database cluster will be initialized with this locale configuration: vm-test-run-wal2json> server # [ 252.436732] postgresql-pre-start[2475]: locale provider: icu vm-test-run-wal2json> server # [ 252.437529] postgresql-pre-start[2475]: default collation: en-US vm-test-run-wal2json> server # [ 252.438009] postgresql-pre-start[2475]: LC_COLLATE: en_US.UTF-8 vm-test-run-wal2json> server # [ 252.439126] postgresql-pre-start[2475]: LC_CTYPE: en_US.UTF-8 vm-test-run-wal2json> server # [ 252.439894] postgresql-pre-start[2475]: LC_MESSAGES: en_US.UTF-8 vm-test-run-wal2json> server # [ 252.441024] postgresql-pre-start[2475]: LC_MONETARY: en_US.UTF-8 vm-test-run-wal2json> server # [ 252.442154] postgresql-pre-start[2475]: LC_NUMERIC: en_US.UTF-8 vm-test-run-wal2json> server # [ 252.443443] postgresql-pre-start[2475]: LC_TIME: en_US.UTF-8 vm-test-run-wal2json> server # [ 252.444357] postgresql-pre-start[2475]: The default text search configuration will be set to "english". vm-test-run-wal2json> server # [ 252.445544] postgresql-pre-start[2475]: Data page checksums are disabled. vm-test-run-wal2json> server # [ 252.446321] postgresql-pre-start[2475]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok vm-test-run-wal2json> server # [ 252.450600] postgresql-pre-start[2475]: creating subdirectories ... ok vm-test-run-wal2json> server # [ 252.454166] postgresql-pre-start[2475]: selecting dynamic shared memory implementation ... posix vm-test-run-wal2json> server # [ 253.130132] postgresql-pre-start[2475]: selecting default "max_connections" ... 100 vm-test-run-wal2json> server # [ 253.626371] postgresql-pre-start[2475]: selecting default "shared_buffers" ... 128MB vm-test-run-wal2json> server # [ 261.404059] postgresql-pre-start[2475]: selecting default time zone ... UTC vm-test-run-wal2json> server # [ 261.439243] postgresql-pre-start[2475]: creating configuration files ... ok vm-test-run-wal2json> server # [ 263.639425] postgresql-pre-start[2475]: running bootstrap script ... ok vm-test-run-wal2json> server # [ 269.145298] postgresql-pre-start[2475]: performing post-bootstrap initialization ... ok vm-test-run-wal2json> server # [ 270.602348] postgresql-pre-start[2475]: syncing data to disk ... ok vm-test-run-wal2json> server # [ 270.606690] postgresql-pre-start[2475]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-wal2json> server # [ 270.609278] postgresql-pre-start[2475]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-wal2json> server # [ 270.613536] postgresql-pre-start[2475]: Success. You can now start the database server using: vm-test-run-wal2json> server # [ 270.614741] postgresql-pre-start[2475]: /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/bin/pg_ctl -D /var/lib/postgresql/17 -l logfile start vm-test-run-wal2json> server # [ 271.766441] postgres[2488]: [2488] LOG: registered custom resource manager "OrioleDB resource manager" with ID 129 vm-test-run-wal2json> server # [ 272.102970] postgres[2488]: [2488] LOG: starting PostgreSQL 17.11 on aarch64-unknown-linux-gnu, compiled by gcc (GCC) 15.2.0, 64-bit vm-test-run-wal2json> server # [ 272.172126] postgres[2488]: [2488] LOG: listening on IPv6 address "::1", port 5432 vm-test-run-wal2json> server # [ 272.177015] postgres[2488]: [2488] LOG: listening on IPv4 address "127.0.0.1", port 5432 vm-test-run-wal2json> server # [ 272.186698] postgres[2488]: [2488] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-wal2json> server # [ 272.273409] postgres[2494]: [2494] LOG: Cleanup of old files at startup. Checkpoint 0 vm-test-run-wal2json> server # [ 272.277828] postgres[2494]: [2494] LOG: database system was shut down at 2026-10-07 23:56:47 GMT vm-test-run-wal2json> server # [ 272.291234] postgres[2495]: [2495] LOG: orioledb background writer 0 started vm-test-run-wal2json> server # [ 272.379831] postgres[2488]: [2488] LOG: database system is ready to accept connections vm-test-run-wal2json> server # [ 272.418383] systemd[1]: Started PostgreSQL Server. vm-test-run-wal2json> server # [ 272.461958] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-wal2json> server # [ 273.656443] postgresql-setup-start[2502]: CREATE EXTENSION vm-test-run-wal2json> server # [ 274.149470] postgresql-setup-start[2508]: CREATE ROLE vm-test-run-wal2json> server # [ 274.342650] postgresql-setup-start[2510]: ALTER ROLE vm-test-run-wal2json> server # [ 274.403331] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-wal2json> server # [ 274.419063] systemd[1]: Reached target PostgreSQL. vm-test-run-wal2json> server # [ 274.717760] nixos[2316]: finished switching to system configuration /nix/store/x92yg82an9wrih717zwlv5qkx2r8n04s-nixos-system-server-test vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extname FROM pg_extension WHERE extname = 'orioledb';" , in 0.38 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" vm-test-run-wal2json> server # NOTICE: schema "public" already exists, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE SCHEMA IF NOT EXISTS public;" , in 0.35 seconds) vm-test-run-wal2json> (finished: subtest: switch to orioledb 17, in 48.05 seconds) vm-test-run-wal2json> subtest: Check upgrade path with orioledb 17 vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" vm-test-run-wal2json> server # NOTICE: extension "wal2json" does not exist, skipping vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "DROP EXTENSION IF EXISTS wal2json;" , in 0.35 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "CREATE EXTENSION wal2json WITH VERSION '2.6' CASCADE;" , in 0.43 seconds) vm-test-run-wal2json> server: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" vm-test-run-wal2json> server: (finished: must succeed: psql -U supabase_admin -d postgres -t -A -F"," -c "SELECT extversion FROM pg_extension WHERE extname = 'wal2json';" , in 0.36 seconds) vm-test-run-wal2json> (finished: subtest: Check upgrade path with orioledb 17, in 1.15 seconds) vm-test-run-wal2json> subtest: Check pg_regress with orioledb 17 after installing the last version vm-test-run-wal2json> server: must succeed: sudo -u postgres /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" vm-test-run-wal2json> server # [ 277.056795] sudo[2533]: root : TTY=hvc0 ; PWD=/tmp ; USER=postgres ; COMMAND=/nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 wal2json vm-test-run-wal2json> server # [ 277.205614] sudo[2533]: pam_unix(sudo:session): session opened for user postgres(uid=71) by (uid=0) vm-test-run-wal2json> server # # could not set core size: disallowed by hard limit vm-test-run-wal2json> server # [ 277.777398] postgres[2540]: [2540] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 277.779397] postgres[2540]: [2540] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 277.780205] postgres[2540]: [2540] STATEMENT: select vm-test-run-wal2json> server # [ 277.782295] postgres[2540]: 1 vm-test-run-wal2json> server # [ 277.783321] postgres[2540]: from vm-test-run-wal2json> server # [ 277.783763] postgres[2540]: pg_create_logical_replication_slot('reg_test', 'wal2json', false); vm-test-run-wal2json> server # [ 277.832716] postgres[2540]: [2540] LOG: starting logical decoding for slot "reg_test" vm-test-run-wal2json> server # [ 277.834069] postgres[2540]: [2540] DETAIL: Streaming transactions committing after 0/15908A0, reading WAL from 0/1590850. vm-test-run-wal2json> server # [ 277.835643] postgres[2540]: [2540] STATEMENT: select vm-test-run-wal2json> server # [ 277.837969] postgres[2540]: data vm-test-run-wal2json> server # [ 277.841789] postgres[2540]: from vm-test-run-wal2json> server # [ 277.842389] postgres[2540]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 277.843167] postgres[2540]: 'reg_test', vm-test-run-wal2json> server # [ 277.845031] postgres[2540]: null, vm-test-run-wal2json> server # [ 277.846479] postgres[2540]: null, vm-test-run-wal2json> server # [ 277.847039] postgres[2540]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 277.847323] postgres[2540]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 277.848217] postgres[2540]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 277.850845] postgres[2540]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 277.852130] postgres[2540]: 'format-version', '2', vm-test-run-wal2json> server # [ 277.853911] postgres[2540]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 277.855355] postgres[2540]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 277.856733] postgres[2540]: ) x; vm-test-run-wal2json> server # [ 277.858215] postgres[2540]: [2540] LOG: logical decoding found consistent point at 0/1590850 vm-test-run-wal2json> server # [ 277.858663] postgres[2540]: [2540] DETAIL: There are no running transactions. vm-test-run-wal2json> server # [ 277.858946] postgres[2540]: [2540] STATEMENT: select vm-test-run-wal2json> server # [ 277.859193] postgres[2540]: data vm-test-run-wal2json> server # [ 277.859412] postgres[2540]: from vm-test-run-wal2json> server # [ 277.859621] postgres[2540]: pg_logical_slot_get_changes( vm-test-run-wal2json> server # [ 277.859836] postgres[2540]: 'reg_test', vm-test-run-wal2json> server # [ 277.860036] postgres[2540]: null, vm-test-run-wal2json> server # [ 277.860236] postgres[2540]: null, vm-test-run-wal2json> server # [ 277.861187] postgres[2540]: 'include-pk', 'true', vm-test-run-wal2json> server # [ 277.861927] postgres[2540]: 'include-transaction', 'false', vm-test-run-wal2json> server # [ 277.862241] postgres[2540]: 'include-timestamp', 'false', vm-test-run-wal2json> server # [ 277.862864] postgres[2540]: 'include-type-oids', 'true', vm-test-run-wal2json> server # [ 277.863509] postgres[2540]: 'format-version', '2', vm-test-run-wal2json> server # [ 277.863774] postgres[2540]: 'actions', 'insert,update,delete', vm-test-run-wal2json> server # [ 277.864009] postgres[2540]: 'add-tables', 'v.foo' vm-test-run-wal2json> server # [ 277.864228] postgres[2540]: ) x; vm-test-run-wal2json> server # [ 278.127016] sudo[2533]: pam_unix(sudo:session): session closed for user postgres vm-test-run-wal2json> server: (finished: must succeed: sudo -u postgres /nix/store/6x6cp5vgrpq4qsh4f651mi5pwvmir00n-postgresql-orioledb-17-wal2json/lib/pgxs/src/test/regress/pg_regress --inputdir=/nix/store/cck1i6y370n0mcwkz9bmyf96bbq0p19w-tests --debug --use-existing --dbname=postgres --outputdir=/tmp/regression_output_orioledb-17 "wal2json" , in 1.51 seconds) vm-test-run-wal2json> # using postmaster on Unix socket, default port vm-test-run-wal2json> ok 1 - wal2json 639 ms vm-test-run-wal2json> 1..1 vm-test-run-wal2json> # All 1 tests passed. vm-test-run-wal2json> vm-test-run-wal2json> (finished: subtest: Check pg_regress with orioledb 17 after installing the last version, in 1.51 seconds) vm-test-run-wal2json> (finished: run the VM test script, in 279.36 seconds) vm-test-run-wal2json> test script finished in 279.72s vm-test-run-wal2json> cleanup vm-test-run-wal2json> kill machine (pid 9) vm-test-run-wal2json> qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/y88crn50yx35fiiwcjx6xqwi6ahk7mlq-python3-3.13.11/bin/python3.13) vm-test-run-wal2json> vde_switch: EOF data port: Interrupted system call vm-test-run-wal2json> kill vlan (pid 7) vm-test-run-wal2json> (finished: cleanup, in 0.01 seconds) vm-test-run-wal2json> vde_switch: Caught signal 15, cleaning up and exiting